Manuel d'utilisation / d'entretien du produit P4S533-VM du fabricant Asus
Aller à la page of 122
Motherboard ® P4S533-VM User Manual.
ii Checklist Copyright © 2002 ASUST eK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, sto.
iii Features About this guide This user manual contains complete information for installing the ASUS P4S533-VM motherboard. How this guide is organized • Chapter 1: Product introduction. A summary of product features and special attributes of new technologies.
iv Safeguards Contents About this guide .............................................................................. ii i How this guide is organized .................................................... ii i Conventions used in this guide ..........
v Contents 2.8 Connectors ........................................................................... 2 9 Chapter 3: Powering up ......................................................... 41 3.1 Starting up for the first time ..........................
vi Safety information Electrical safety • T o prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected.
vii FCC/CDC statements Federal Communications Commission Statement This device complies with FCC Rules Part 15. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation.
viii ASUS contact information ASUST eK COMPUTER INC. (Asia-Pacific) Address: 150 Li-T e Road, Peitou, T aipei, T aiwan 1 12 General T el: +886-2-2894-3447 General Fax: +886-2-2894-3449 General Email: info@asus.
Chapter 1 Product introduction.
ASUS P4S533-E motherboard.
ASUS P4S533-VM motherboard user guide 1 W elcome! Thank you for buying the ASUS ® P4S533-VM motherboard! The ASUS P4S533-VM motherboard delivers a host of new features to ensure long-lasting, superlative performance. The ASUS ® P4S533-VM motherboard is the prime choice for home PCs and workstations.
2 Chapter 1: Product introduction 1.2 Core Specifications The P4S533-VM motherboard is designed and assembled according to the highest standards. This ASUS motherboard represents the latest advances to supply users the finest componentry available today .
ASUS P4S533-VM motherboard user guide 3 1.3 V alue-added Solutions Software Audio : On audio models, a digital audio CODEC, CMI-9738 supports 4-Ch output, and the SiS962L supports the Sony/Philips Digital Interface (S/PDIF) Output module for coaxial and fiber interfaces.
4 Chapter 1: Product introduction Location Processor Support Socket 478 for Intel ® P4 ™ Processors ............................. 2 Chipsets SiS ® 651 North Bridge ..................................................... 3 SiS ® 962L South Bridge ..
ASUS P4S533-VM motherboard user guide 5 1.4.1 Component Locations 23 4 5 12 16 20 19 1 18 13 21 26 15 14 9 11 10 17 24 6 8 7 25 22 23 27 28 29 30 31 32 33 35 37 36 34.
.
Chapter 2 Hardware information.
ASUS P4S533-VM motherboard.
ASUS P4S533-VM motherboard user guide 7 2.1 Motherboard installation Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits into it. The P4S533-VM uses the micro- A TX form factor that measures 24.
8 Chapter 2: Hardware information 2.2 Motherboard layout The audio and LAN features are optional. These components are grayed out in the above motherboard layout.
ASUS P4S533-VM motherboard user guide 9 2.2.1 Layout contents CPU, Memory and Expansion Slots 1) Socket 478 p. 12 Installing the C PU 2) Heatsink p. 14 Installing the Heatsink and Fan 3) Memory p. 17 System Memory Support 4) PCI 1/2/3 p. 21 32-bit PCI Bus Expansion Slots 5) AGP 4x p.
10 Chapter 2: Hardware information 2.3 Before you proceed T ake note of the following precautions before you install motherboard components or change any motherboard settings. 1. Unplug the power cord from the wall socket before touching any component.
ASUS P4S533-VM motherboard user guide 11 2.4 Central Processing Unit (CPU) 2.4.1 Overview The motherboard comes with a surface mount 478-pin Zero Insertion Force (ZIF) socket. This socket is specifically designed for the Intel ® Pentium ® 4 478/Northwood Processor .
12 Chapter 2: Hardware information 2.4.2 Installing the CPU Follow these steps to install a CPU. 1. Locate the 478-pin ZIF socket on the motherboard. 2.
ASUS P4S533-VM motherboard user guide 13 3. Position the CPU above the socket such that its marked corner matches the base of the socket lever . 4. Carefully insert the CPU into the socket until it fits in place. The CPU fits only in one correct orientation.
14 Chapter 2: Hardware information 2.4.3 Installing the heatsink and fan The Intel ® Pentium ® 4 478/Northwood Processor requires a specially designed heatsink and fan assembly to ensure optimum thermal condition and performance. The retention module base is already installed on the motherboard upon purchase.
ASUS P4S533-VM motherboard user guide 15 2. Position the fan with the retention mechanism on top of the heatsink. Align and snap the four hooks of the retention mechanism to the holes on each corner of the module base. Keep the retention locks lifted upward while fitting the retention mechanism to the module base.
16 Chapter 2: Hardware information 2.4.4 Connecting the CPU fan cable When the fan, heatsink, and the retention mechanism are in place, connect the CPU fan cable to the connector on the motherboard labeled CPUF AN1. 3. Push down the locks on the retention mechanism to secure the heatsink and fan to the module base.
ASUS P4S533-VM motherboard user guide 17 2.5 System memory 2.5.1 Overview The motherboard comes with two Double Data Rate (DDR) Dual Inline Memory Module (DIMM) sockets. These sockets support up to 2GB system memory using 184-pin unbuffered non-ECC PC2700/2100/1600 DIMMs.
18 Chapter 2: Hardware information 2.5.2 Memory configurations Y ou may install any DDR DIMMs with 64MB, 128MB, 256MB, 512MB and 1GB densities into the two DIMM sockets.
ASUS P4S533-VM motherboard user guide 19 3. Firmly insert the DIMM into the socket until the retaining clips snap back in place and the DIMM is properly seated. Locked Retaining Clip 2.5.3 Installing a DIMM Make sure to unplug the power supply before adding or removing DIMMs or other system components.
20 Chapter 2: Hardware information 2.5.4 Removing a DIMM Follow these steps to remove a DIMM. 1. Simultaneously press the retaining clips outward to unlock the DIMM. Support the DIMM lightly with your fingers when pressing the retaining clips. The DIMM might get damaged when it flips out with extra force.
ASUS P4S533-VM motherboard user guide 21 2.6 Expansion slots In the future, you may need to install expansion cards. The motherboard has three PCI slots and one Accelerated Graphics Port (AGP) slot. The following sub-sections describe the slots and the expansion cards that they support.
22 Chapter 2: Hardware information Standard Interrupt Assignments IRQ Priority Standard Function 0 1 System T imer 1 2 Keyboard Controller 2 N/A Programmable Interrupt 3* 1 1 Communications Port (COM2.
ASUS P4S533-VM motherboard user guide 23 2.6.3 PCI slots There are three 32-bit PCI slots in this motherboard. The slots support PCI cards such as a LAN card, SCSI card, USB card, and other cards that comply with PCI specifications. The following figure shows a LAN card installed on a PCI slot.
24 Chapter 2: Hardware information P4S533-VM ® P4S533-VM CP U External Frequency Selection FSJ1 CPU 100MHz DDR 200MHz 1 100MHz 266MHz 1 100MHz 333MHz 1 CPU 133MHz DDR 200MHz 1 133MHz 266MHz 1 133MHz 333MHz 1 (Default) 1.
ASUS P4S533-VM motherboard user guide 25 2. USB Device W ake-Up (USBPWR_12, _34, _56) The default setting, [1-2] (+5V) disables the USB wake-up feature. Reset these jumpers to pins [2-3] (+5VSB) to wake up the computer using USB devices. The USB device wake-up feature requires a power supply that can provide at least 1A on the +5VSB lead.
26 Chapter 2: Hardware information P4S533-VM ® P4S533-VM Internal Line Out Connectors FP_LO_SWL FP_LO_SWR BLOL FLOL BLOR FLOR 3. Line out selector (FP_LO_SWR, FP_LO_SWL) (on audio models only) By def.
ASUS P4S533-VM motherboard user guide 27 P4S533-VM ® P4S533-VM Clear RTC RAM Setting Short solder points to Clear CMOS CLRTC1 4. Clear RTC RAM (CLRTC1) These solder points allow you to clear the Real T ime Clock (RTC) RAM in CMOS. Y ou can clear the CMOS memory of date, time, and system setup parameters by erasing the CMOS RTC RAM data.
28 Chapter 2: Hardware information.
ASUS P4S533-VM motherboard user guide 29 2.8 Connectors This section describes and illustrates the internal connectors on the motherboard. IMPORT ANT! Ribbon cables should always be connected with the red stripe to Pin 1 in the connector scoket.
30 Chapter 2: Hardware information 3. Universal Serial Bus Ports 1 and 2 (Black, T wo x 4-pin USB) Four USB ports are available for connecting USB devices. 5. Serial Port and Header (T eal/T urquoise 9-pin COM1, 10-1 pin COM2) One serial port can be used for pointing devices, printers or other serial devices.
ASUS P4S533-VM motherboard user guide 31 Mic Line In Line Out 1/8" Stereo Audio Connectors 7. Audio Connectors (Three 1/8 ” AUDIO) (optional) The Line Out (lime) connects a headphone or speakers. The Line In (light blue) connects a tape players or other audio sources.
32 Chapter 2: Hardware information Some pins are used for connectors or power sources. These are clearly distinguished from jumpers in the Motherboard Layout. Placing jumper caps over these connector pins will cause damage to your motherboard. 10. IDE Activity LED (2-pin IDELED) This connector supplies power to the hard disk activity LED.
ASUS P4S533-VM motherboard user guide 33 1 1. IDE Connectors (40-1 pin PRI_IDE1 / SEC_IDE1) This connector supports the provided UltraDMA133/100/66 IDE hard disk ribbon cable.
34 Chapter 2: Hardware information 12. Floppy disk drive connector (34-1 pin FLOPPY) This connector supports the provided floppy drive ribbon cable. After connecting one end to the motherboard, connect the other end to the floppy drive. (Pin 5 is removed to prevent incorrect insertion when using ribbon cables with pin 5 plug).
ASUS P4S533-VM motherboard user guide 35 14. A TX power connectors (20-pin A TXPWR1, 4-pin A T X12V1) These connectors connect to an A TX 12V power supply . The plugs from the power supply are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit.
36 Chapter 2: Hardware information 16. Internal audio connectors (4-pin CD1, AUX1, MODEM) (optional) These connectors allow you to receive stereo audio input from sound sources such as a CD-ROM, TV tuner , or MPEG card. The MODEM connector allows the onboard audio to interface with a voice modem card with a similar connector .
ASUS P4S533-VM motherboard user guide 37 17. Digital audio connector (4-1 pin SPDIF_OUT1) (optional) This connector connects an S/PDIF audio module that allows digital instead of analog sound output. Connect one end of the audio cable to the S/PDIF Out connector on the motherboard, and the other end to the S/PDIF module.
38 Chapter 2: Hardware information P4S533-VM ® P4S533-VM Intel Panel Connector FP_AUDIO1 BOUT_L MIC2 LOUT_R LOUT_L NC MICPWR +5V A AGND_A 1 BOUT_R 20.
ASUS P4S533-VM motherboard user guide 39 P4S533-VM ® P4S533-VM SIRQ1 Connector SIRQ1 SERIRQ GND 21. Serial IRQ connector (2 pin SIRQ1) (optional) This connector supports the serial IRQ cable. This cable is required by some PCI cards like those with PCMCIA function.
40 Chapter 2: Hardware information Panel Connector (20 pin P ANEL) The following diagram illustrates items 22-27: P4S533-VM ® P4S533-VM System Panel Connectors * Requires an A TX power supply .
Chapter 3 Powering up.
ASUS P4S533-VM motherboard.
ASUS P4S533-VM motherboard user guide 41 3.1 Starting up for the first time 1. After making all the connections, replace the system case cover . 2. Be sure that all switches are of f. 3. Connect the power cord to the power connector at the back of the system chassis.
42 Chapter 3: Powering up 3.3 Powering off the computer Y ou must first exit the operating system and shut down the system before switching off the power . For A TX power supplies, you can press the A TX power switch after exiting or shutting down the operating system.
Chapter 4 BIOS setup.
ASUS P4S533-VM motherboard.
ASUS P4S533-VM motherboard user guide 43 4.1 Managing and updating your BIOS 4.1.1 Using the computer system for the first time It is recommended that you save a copy of the original motherboard BIOS along with a Flash Memory W riter utility (AFLASH.EXE) to a bootable floppy disk in case you need to reinstall the BIOS later .
44 Chapter 4: BIOS Setup 5. Select 1. Save Current BIOS to File from the Main menu and press <Enter>. The Save Current BIOS T o File screen appears.
ASUS P4S533-VM motherboard user guide 45 1. Download an updated ASUS BIOS file from the Internet (see the ASUS Contact Information on page x for details) and save to the boot floppy disk you created earlier . 2. Boot from the floppy disk. 3. At the “ A: ” prompt, type AFLASH and then press <Enter>.
46 Chapter 4: BIOS Setup 7. The utility starts to program the new BIOS information into the Flash ROM. The boot block is updated automatically only when necessary . This minimizes the possibility of boot problems in case of update failures. When the programming is done, the message “ Flashed Successfully ” appears.
ASUS P4S533-VM motherboard user guide 47 4.2 BIOS Setup program This motherboard supports a programmable EEPROM that you can update using the provided utility described in section “ 4.
48 Chapter 4: BIOS Setup 4.2.1 BIOS menu bar The top of the screen has a menu bar with the following selections: MAIN Use this menu to make changes to the basic system configuration. ADV ANCED Use this menu to enable and make changes to the advanced features.
ASUS P4S533-VM motherboard user guide 49 General help In addition to the Item Specific Help window , the BIOS setup program also provides a General Help screen. Y ou may launch this screen from any menu by simply pressing <F1> or the <Alt> + <H> combination.
50 Chapter 4: BIOS Setup System Time [XX:XX:XX] Sets the system to the time that you specify (usually the current time). The format is hour , minute, second. V alid values for hour , minute and second are Hour: (00 to 23), Minute: (00 to 59), Second: (00 to 59).
ASUS P4S533-VM motherboard user guide 51 4.3.1 Primary & Secondary Master/Slave T ype [Auto] Select [Auto] to automatically detect an IDE hard disk drive. If automatic detection is successful, Setup automatically fills in the correct values for the remaining fields on this sub-menu.
52 Chapter 4: BIOS Setup If no drive is installed or if you are removing a drive and not replacing it, select [None]. Other options for the T ype field are: [CD-ROM] - for IDE CD-ROM drives [LS-120] -.
ASUS P4S533-VM motherboard user guide 53 T ranslation Method [LBA] Select the hard disk drive type in this field. When Logical Block Addressing (LBA) is enabled, the 28-bit addressing of the hard drive is used without regard for cylinders, heads, or sectors.
54 Chapter 4: BIOS Setup SMART Monitoring [Disabled] This field allows you to enable or disable the S.M.A.R.T . (Self-Monitoring, Analysis and Reporting T echnology) system that utilizes internal hard disk drive monitoring technology .
ASUS P4S533-VM motherboard user guide 55 4.3.2 Keyboard Features Boot Up NumLock Status [On] This field enables users to activate the Number Lock function upon system boot. Configuration options: [Of f] [On] Keyboard Auto-Repeat Rate [6/Sec] This controls the speed at which the system registers repeated keystrokes.
56 Chapter 4: BIOS Setup Language [English] This field displays the BIOS language version. Supervisor Password [Disabled] / User Password [Disabled] These fields allow you to set passwords. T o set a password, highlight the appropriate field and press <Enter>.
ASUS P4S533-VM motherboard user guide 57 4.4 Advanced Menu CPU Frequency Multiple (when CPU Speed is set to [Manual]) This field displays the frequency multiple between the CPU ’ s internal frequency (CPU speed) and external frequency .
58 Chapter 4: BIOS Setup BIOS Update [Enabled] This field functions as an update loader integrated into the BIOS to supply the processor with the required data.
ASUS P4S533-VM motherboard user guide 59 4.4.1 Chip Configuration SDRAM Configuration [By SPD] This parameter allows you to set the optimal timings for items 2 – 5, depending on the memory modules that you are using. The default setting is [By SPD], which configures items 2 – 5 by reading the contents in the SPD (Serial Presence Detect) device.
60 Chapter 4: BIOS Setup SDRAM Command Lead-off Time [Auto] When set to [2T], memore read/write commands are issued 1 clock cycle behind the memory address (MA).
ASUS P4S533-VM motherboard user guide 61 PCI 2.1 Support [Enabled] This field allows you to enable or disable the PCI 2.1 features. Keep the default setting [Enabled] if you installed PCI 2.1 compliant cards. Set to [Disabled] if you installed any card that is not PCI 2.
62 Chapter 4: BIOS Setup 4.4.2 I/O Device Configuration Floppy Disk Access Control [R/W] When set to [Read Only], this parameter protects files from being copied to floppy disks by allowing reads from, but not writes to, the floppy disk drive. The default setting [R/W] allows both reads and writes.
ASUS P4S533-VM motherboard user guide 63 Parallel Port Mode [ECP+EPP] This field allows you to set the operation mode of the parallel port. [Normal] allows normal-speed operation but in one direction .
64 Chapter 4: BIOS Setup Slot 1, 2, 3 IRQ [Auto] These fields automatically assign the IRQ for each PCI slot. The default setting for each field is [Auto], which utilizes auto-routing to determine IRQ assignments.
ASUS P4S533-VM motherboard user guide 65 Onboard LAN [Enabled] [Auto] allows the BIOS to detect whether you are using any audio device. If an audio device is detected, the onboard audio controller is enabled; if no audio device is detected, the controller is disabled.
66 Chapter 4: BIOS Setup IRQ XX Reserved [No/ICU] These fields indicate whether or not the displayed IRQ for each field is being used by a legacy (non-PnP) ISA card. The setting [No/ICU] for an IRQ field indicates that you are using the ISA Configuration Utility (ICU), and that this particular IRQ is NOT required by a legacy ISA card.
ASUS P4S533-VM motherboard user guide 67 4.5 Power Menu The Power menu allows you to reduce power consumption. This feature turns of f the video display and shuts down the hard disk after a period of inactivity . Power Management [User Defined] This field allows you to activate or deactivate the automatic power saving features.
68 Chapter 4: BIOS Setup Video Off Option [Suspend -> Off ] This field determines when to activate the video off feature for monitor power management. Configuration options: [Always On] [Suspend -> Off] Video Off Method [DPMS OFF] This field defines the video of f features.
ASUS P4S533-VM motherboard user guide 69 4.5.1 Power Up Control AC PWR Loss Restart [Disabled] This allows you to set whether or not to reboot the system after power interruptions. [Disabled] leaves your system of f while [Enabled] reboots the system.
70 Chapter 4: BIOS Setup W ake On LAN [Disabled] When set to [Enabled], this item allows you to turn on the system through the onboard LAN. This feature requires an A TX power supply that provides at least 1A on the +5VSB lead.
ASUS P4S533-VM motherboard user guide 71 4.5.2 Hardware Monitor MB T emperature [xxxC/xxxF] CPU T emperature [xxxC/xxxF] The onboard hardware monitor automatically detects the MB (motherboard) and CPU temperatures.
72 Chapter 4: BIOS Setup Boot Sequence The Boot menu allows you to select among the four possible types of boot devices listed using the up and down arrow keys. By using the <+> or <Space> key , you can promote devices and by using the <-> key , you can demote devices.
ASUS P4S533-VM motherboard user guide 73 Plug & Play O/S [No] This field allows you to use a Plug-and-Play (PnP) operating system to configure the PCI bus slots instead of using the BIOS. When [Y es] is selected, interrupts may be reassigned by the OS.
74 Chapter 4: BIOS Setup 4.7 Exit Menu When you have made all of your selections from the various menus in the Setup program, save your changes and exit Setup.
ASUS P4S533-VM motherboard user guide 75 Load Setup Defaults This option allows you to load the default values for each of the parameters on the Setup menus. When you select this option or if you press <F5>, a confirmation window appears. Select [Y es] to load default values.
76 Chapter 4: BIOS Setup.
Chapter 5 Software support.
ASUS P4S533-VM motherboard.
ASUS P4S533-VM motherboard user guide 77 5.1 Install an operating system This motherboard supports Windows 98/ME/NT/2000/XP and OS/2 operating system (OS). Always install the latest OS version and corresponding updates so you can maximize the features of your hardware.
78 Chapter 5: Software reference 5.3 P4S533-VM Motherboard Support CD NOTE: The support CD contents are subject to change without notice. T o begin using your support CD disc, just insert it into your CD-ROM drive and the support CD installation menu should appear .
ASUS P4S533-VM motherboard user guide 79 • ITE GSM Editor: Installs the GSM SIM card editing application. • ASUS Screen Saver: Installs a nifty ASUS screen saver . • E-Color 3Deep: Installs graphical driver and an application for tuning the quality of color output from CRT and LCD monitors.
80 Chapter 5: Software reference 5.4 ASUS PC Probe ASUS PC Probe is a convenient utility to continuously monitor your computer system ’ s vital components, such as fan rotations, V oltages, and temperatures.
ASUS P4S533-VM motherboard user guide 81 5.4.2 Using ASUS PC Probe Monitoring Monitor Summary Shows a summary of the items being monitored. T emperature Monitor Shows the PC ’ s temperature.
82 Chapter 5: Software reference Information Settings Lets you set threshold levels and polling intervals or refresh times of the PC ’ s temperature, fan rotation, and voltages. History Lets you record the current monitoring activity of a certain component of your PC for future reference.
ASUS P4S533-VM motherboard user guide 83 Device Summary Shows a summary of devices in your PC. DMI Explorer Shows information pertinent to the PC, such as CPU type, CPU speed, and internal/external frequencies, and memory size. Utility Lets you run programs outside of the ASUS Probe modules.
84 Chapter 5: Software reference 5.4.3 ASUS PC Probe T ask Bar Icon When the ASUS PC Probe senses a problem with your PC, portions of the ASUS PC Probe icon changes to red, the PC speaker beeps, and the ASUS PC Probe monitor is displayed.
ASUS P4S533-VM motherboard user guide 85 5.5 ASUS Live Update ASUS LiveUpdate is a utility that allows you to update your motherboard ’ s BIOS and drivers. The use of this utility requires that you are properly connected to the Internet through an I nternet S ervice P rovider (ISP).
86 Chapter 5: Software reference 5.6 3Deep Color T uner The 3-Deep color tuner is designed to match your CR T or LCD color monitor to maximize the color quality of all graphical applications. Users may also tune their internet applications to match “ true ” internet source colors with the color displayed on the monitor .
ASUS P4S533-VM motherboard user guide 87 4. Select the color squares which most closely blend and match with the background. 5. The next step repeats the color matching process to achieve full color quality . 6. The tuning process is complete. Click on the bottom left button to connect to the internet and follow the instructions.
88 Chapter 5: Software reference 5.7 ITE GSM Editor The ITE GSM Editor is a useful application for editing and managing the data contained on a GSM cell phone SIM card chip . This unique software supports access of the SIM card “ phone book. ” The editor helps you to add or delete data including new names and phone numbers.
ASUS P4S533-VM motherboard user guide 89 The ITE GSM menu: Using the basic ITE GSM Editor: 1. Carefully remove the SIM chip from your mobile phone. The most convenient method to read the SIM chip is to use a conversion card: slip the SIM chip into the conversion card and then insert it into the card reader .
90 Chapter 5: Software reference Using the Command field: 1. W rite All Entries into SIM Card , and the program writes all new data appearing in the fields onto the SIM card. 2. Write Revised Entry into SIM Card , and the program writes all updated entries into the existing SIM card phone book.
ASUS P4S533-VM motherboard user guide 91 Using the PIN Manager: 1. Enable PIN Set-Up : This function is used to set the PIN. This function is effective only if the PIN set-up is disabled and the SIM card is not blocked . First enter the PIN set previously to enable the PIN set-up function.
.
Glossary.
ASUS P4S533-VM motherboard.
ASUS P4S533-VM motherboard user guide 93 1394 1394 is the IEEE designation for a high performance serial bus tht of fers data transfers at 100/200/400 Mbps. This serial bus defines both a back plane physical layer and a point-to-point cable-connected virtual bus.
94 Appendix: Glossary Bus Master IDE PIO (Programmable I/O) IDE requires that the CPU be involved in IDE access and waiting for mechanical events. Bus master IDE transfers data to/from the memory without interrupting the CPU. Bus master IDE driver and bus master IDE hard disk drives are required to support bus master IDE mode.
ASUS P4S533-VM motherboard user guide 95 I/O (Input/Output) The data transfers from the input devices like a keyboard, mouse, or scanner , to the output devices like a printer or the monitor screen. I/O Address The specific memory location for a particular device.
96 Appendix: Glossary RDRAM (Rambus DRAM) Developed by Rambus, Inc., this type of memory can deliver up to 1.6GB of data per second. RDRAM is the first interface standard that can be directly implemented on high performance VLSI components such as, CMOS DRAMs, memory controllers, and graphics/video ICs.
Index.
ASUS P4S533-VM motherboard.
ASUS P4S533-VM motherboard user guide 97 Index Symbols 3Deep Color T uner Using 86 A Accelerated Graphics Port 23 ASUS PC Probe Using 80 ASUS Update Using 85 A T API CD-ROM 72 Automatic Power Up 71 B .
98 Index E expansion card installation 21 IRQ assigments 22 Expansion slots 21 F Floppy 3 Mode 50 Floppy Disk Drive Connector 9 H Hard Disk Drives (HDDs) CHS Capacity 53 Cylinders 53 Heads 53 LBA Capa.
ASUS P4S533-VM motherboard user guide 99 PIO Mode 54 Plug & Play O/S 73 Power Management 67 Power On Self T est 73 PS/2 Keyboard 29 PS/2 Keyboard Port 2 PS/2 Mouse 29 Function Control 58 PS/2 Mous.
100 Index.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Asus P4S533-VM c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Asus P4S533-VM - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Asus P4S533-VM, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Asus P4S533-VM va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Asus P4S533-VM, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Asus P4S533-VM.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Asus P4S533-VM. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Asus P4S533-VM ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
