Manuel d'utilisation / d'entretien du produit P4B533-X du fabricant Asus
Aller à la page of 68
Motherboard P4B533-X User Guide.
ii Checklist Copyright © 2003 ASUST eK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, sto.
iii Features Contents Notices ........................................................................................... vi Safety information ......................................................................... vii About this guide ............
iv Safeguards Contents Chapter 2: BIOS information 2.1 Managing and updating your BIOS .................................... 2-2 2.1.1 Creating a bootable floppy disk ............................. 2-2 2.1.2 Using AFUDOS to copy the current BIOS .......
v 2.6 Boot menu ........................................................................ 2-25 2.6.1 Boot Device Priority ............................................. 2-25 2.6.2 Removable Drives ............................................... 2-26 2.6.
vi Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation.
vii Safety infor mation Electrical safety • T o prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected.
viii About this guide Conventions used in this guide T o make sure that you perform certain tasks properly , take note of the following symbols used throughout this manual. Where to find more information Refer to the following sources for additional information and for product and software updates.
ix P4B533-X specification summar y CPU Chipset Front Side Bus (FSB) Memory Expansion slots Storage Audio LAN USB Special features Extreme Overclocking Rear panel I/O (continued on the next page) Socket 478 for Intel ® Pentium ® 4 / Celeron processors with speeds up to 3.
x P4B533-X specification summar y * Specifications are subject to change without notice. CPU/Chassis F AN connectors 20-pin A TX power connector 4-pin A TX 12V power connector GAME/MIDI connector CD/AUX audio in Front panel audio connector 1 x USB 2.0 connector supports additional 2 USB 2.
Chapter 1 This chapter describes the features of the motherboard. It includes brief descriptions of the motherboard components, and illustrations of the layout, jumper settings, and connectors.
1-2 Chapter 1: Product introduction 1 . 1 W elcome! Thank you for buying the ASUS ® P4B533-X motherboard! The motherboard incorporates the Intel ® Pentium ® 4 processor in a 478-pin package coupled with the Intel ® 845E chipset to set a new benchmark for an effective desktop platform solution.
ASUS P4B533-X motherboard user guide 1-3 1 .3 Special features 1.3.1 Product highlights Latest processor technology The motherboard supports the latest Intel ® Pentium ® 4 or Celeron p rocessor via a 478- pin surface mount ZIF socket. The Pentium 4 processor with 512KB L2 cache on 0.
1-4 Chapter 1: Product introduction 1.3.2 Unique ASUS features CrashFree BIOS 2 This feature allows you to restore the original BIOS data from a floppy disk or support CD in case when the BIOS codes and data are corrupted. This protection eliminates the need to buy a replacement ROM chip.
ASUS P4B533-X motherboard user guide 1-5 1 .4 Before you proceed T ake note of the following precautions before you install motherboard components or change any motherboard settings. 1. Unplug the power cord from the wall socket before touching any component.
1-6 Chapter 1: Product introduction 1 .5 Motherboard over view 1.5.1 Motherboard layout PCI1 P ANEL1 P4B533-X ® CD1 AUX1 Super I/O 3Mbit BIOS Accelerated Graphics Port (AGP) CPU_F AN1 FP_AUDIO1 GAME1.
ASUS P4B533-X motherboard user guide 1-7 Do not overtighten the screws! Doing so may damage the motherboard. 1.5.2 Placement direction When installing the motherboard, make sure that you place it into the chassis in the correct orientation. The edge with external ports goes to the rear part of the chassis as indicated in the image below .
1-8 Chapter 1: Product introduction 1 .6 Central Pr ocessing Unit (CPU) 1.6.1 Overview The Intel ® Pentium ® 4 Northwood/Willamette/Prescott processors has a gold triangular mark on one corner . This mark indicates the processor Pin 1 that should match a specific corner of the CPU socket.
ASUS P4B533-X motherboard user guide 1-9 1.6.2 Installing the CPU Follow these steps to install a CPU. 1. Locate the 478-pin ZIF socket on the motherboard.
1-10 Chapter 1: Product introduction Obtain DDR DIMMs only from ASUS qualified vendors. Visit the ASUS website (www .asus.com) for the latest QVL. 1 .7 System memor y 1.7.1 DIMM sockets location The following figure illustrates the location of the DDR DIMM sockets.
ASUS P4B533-X motherboard user guide 1-11 1 .8 Expansion slots T o install and configure an expansion card: 1. Install an expansion card following the instructions that came with the chassis. 2. T urn on the system and change the necessary BIOS settings, if any .
1-12 Chapter 1: Product introduction 1.8.1 Standard interrupt assignments IRQ Priority Standard Function 0 1 System T imer 1 2 Keyboard Controller 2 N/A Programmable Interrupt 3* 1 1 IRQ holder for PC.
ASUS P4B533-X motherboard user guide 1-13 1.8.3 PCI slots The PCI slots support PCI cards such as a LAN card, SCSI card, USB card, and other cards that comply with PCI specifications. 1.8.4 AGP slot The Accelerated Graphics Port (AGP) slot that supports AGP 4X cards.
1-14 Chapter 1: Product introduction 1 .9 Jumper s 1. Clear RTC RAM (CLRTC) This jumper allows you to clear the Real T ime Clock (R TC) RAM in CMOS. Y ou can clear the CMOS memory of date, time, and system setup parameters by erasing the CMOS RTC RAM data.
ASUS P4B533-X motherboard user guide 1-15 2. USB device wake-up (3-pin USBPW12, USBPW34, USBPW56) Set these jumpers to +5V to wake up the computer from S1 sleep mode (CPU stopped, DRAM refreshed, system running in low power mode) using the connected USB devices.
1-16 Chapter 1: Product introduction 1. 10 Connectors This section describes and illustrates the motherboard rear panel and internal connectors. 1.10.1 Rear panel connectors 1 11 4 5 6 7 2 3 9 10 8 1. PS/2 mouse port. This green 6-pin connector is for a PS/2 mouse.
ASUS P4B533-X motherboard user guide 1-17 1.10.2 Internal connectors 1. IDE connectors (40-1 pin PRI_IDE, SEC_IDE) This connector supports the provided UltraA T A 100 IDE hard disk ribbon cable.
1-18 Chapter 1: Product introduction 3. A TX power connectors (20-pin A TXPWR1, 4-pin A TX12V1) These connectors connect to an A TX 12V power supply . The plugs from the power supply are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit.
ASUS P4B533-X motherboard user guide 1-19 5. CPU and chassis fan connectors (3-pin CPU_F AN1, CHA_F AN1) The fan connectors support cooling fans of 350mA~740mA (8.
1-20 Chapter 1: Product introduction 7. Front panel audio connector (10-1 pin FP_AUDIO) This is an interface for the front panel cable that allows convenient connection and control of audio devices. Be default, the pins labeled LINE OUT_R/BLINE_OUT_R and the pins LINE OUT_L/BLINE_OUT_L are shorted with jumper caps.
ASUS P4B533-X motherboard user guide 1-21 • System Power LED Lead (3-1 pin PLED) This 3-1 pin connector connects to the system power LED. The LED lights up when you turn on the system power , and blinks when the system is in sleep mode.
1-22 Chapter 1: Product introduction.
Chapter 2 This chapter tells how to change system settings through the BIOS Setup menus. Detailed descriptions of the BIOS parameters are also provided.
2-2 Chapter 2: BIOS information 2. 1 Managing and updating your BIOS The following utilities allow you to manage and update the motherboard Basic Input/Output System (BIOS) setup. 1. AFUDOS (Updates the BIOS in DOS mode using a bootable floppy disk.) 2.
ASUS P4B533-X motherboard 2-3 2. The utility will copy the current system BIOS by default to the floppy disk. Make sure that the floppy disk is not write-protected and have enough space (at least 600KB) to store the file. The BIOS information on the screen is for reference only .
2-4 Chapter 2: BIOS information Write down the BIOS file name to a piece of paper . Y ou need to type the exact BIOS file name at the prompt. 2. Copy the AFUDOS.EXE utility from the support CD to the bootable floppy disk that contains the BIOS file. 3.
ASUS P4B533-X motherboard 2-5 2.1.4 Using ASUS EZ Flash to update the BIOS The ASUS EZ Flash feature allows you to easily update the BIOS without having to go through the long process of booting from a floppy disk and using a DOS-based utility .
2-6 Chapter 2: BIOS information 2.1.5 Recovering the BIOS with CrashFree BIOS 2 The CrashFree BIOS 2 auto recovery tool allows you to restore BIOS from the motherboard support CD, or from a floppy disk that contains the BIOS file, in case the current BIOS on the motherboard fails or gets corrupted.
ASUS P4B533-X motherboard 2-7 The recovered BIOS may not be the latest BIOS version for this motherboard. V isit the ASUS website (www .asus.com) to download the latest BIOS file. If there is no floppy disk found in the drive, the system automatically checks the CD-ROM.
2-8 Chapter 2: BIOS information 2.2 BIOS Setup progr am This motherboard supports a programmable Firmware Hub (FWH) chip that you can update using the provided utility described in section “ 2.
ASUS P4B533-X motherboard 2-9 2.2.2 Menu bar The menu bar on top of the screen has the following main items: Main For changing the basic system configuration Advanced For changing the advanced system .
2-10 Chapter 2: BIOS information 2.2.4 Menu items The highlighted item on the menu bar displays the specific items for that menu. For example, selecting Main shows the Main menu items. The other items (Advanced, Power , Boot, and Exit) on the menu bar have their respective menu items.
ASUS P4B533-X motherboard 2-11 2.3 Main menu When you enter the BIOS Setup program, the Main menu screen appears giving you an overview of the basic system information. 2.3.1 System T ime [xx:xx:xxxx] This item allows you to set the system time. 2.3.2 System Date [Day xx/xx/xxxx] This item allows you to set the system date.
2-12 Chapter 2: BIOS information 2.3.4 Primary and Secondary IDE Master/Slave While entering Setup, BIOS auto-detects the presence of IDE devices. There is a separate sub-menu for each IDE device. Select a device item then press Enter to display the IDE device information.
ASUS P4B533-X motherboard 2-13 DMA Mode [Auto] Selects the DMA mode. Configuration options: [Auto] [SWDMA0] [SWDMA1] [SWDMA2] [MWDMA0] [MWDMA1] [MWDMA2] [UDMA0] [UDMA1] [UDMA2] [UDMA3] [UDMA4] [UDMA5] SMAR T Monitoring [Auto] Sets the Smart Monitoring, Analysis, and Reporting T echnology .
2-14 Chapter 2: BIOS information 2.4 Advanced menu The Advanced menu items allow you to change the settings for the CPU and other system devices. JumperFree Configuration CPU Configuration Chipset Onboard Devices Configuration PCI PnP Configure CPU.
ASUS P4B533-X motherboard 2-15 CPU Frequency [133] (value is auto-detected) Indicates the frequency sent by the clock generator to the system bus and PCI bus. The bus frequency (external frequency) multiplied by the bus multiple equals the CPU speed. The value of this item is auto-detected by BIOS and is not manually configurable.
2-16 Chapter 2: BIOS information 2.4.3 Chipset The Chipset menu items allow you to change the advanced chipset settings. Select an item then press Enter to display the sub-menu.
ASUS P4B533-X motherboard 2-17 Search for MDA Resources [Auto] This item allows search for MDA (Monochrome Display Adapter) resources. Configuration options: [No] [Y es] Fast T iming [Auto] This item allows you to set the Fast T iming feature. Configuration options: [Auto] [Enabled] [Disabled] 2.
2-18 Chapter 2: BIOS information USB Configuration The items in this menu allows you to change the USB-related features. Select an item then press Enter to display the configuration options. Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit Module Version : 2.
ASUS P4B533-X motherboard 2-19 Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit USB Mass Storage Reset Delay [20 Sec] No USB Mass Storage device detected USB Mass Storage Device Configuration Number of seconds POST waits for the USB mass storage device after that start unit command.
2-20 Chapter 2: BIOS information 2.4.5 PCI PnP The PCI PnP menu items allow you to change the advanced settings for PCI/PnP devices. The menu includes setting IRQ and DMA channel resources for either PCI/PnP or legacy ISA devices, and setting the memory size block for legacy ISA devices.
ASUS P4B533-X motherboard 2-21 Plug and Play O/S [No] When set to [No], BIOS configures all the devices in the system. When set to [Y es] and if you installed a Plug & Play operating system, the operating system configures the Plug & Play devices not required for boot.
2-22 Chapter 2: BIOS information 2.5 Power menu The Power menu items allow you to change the settings for the Advanced Power Management (APM). Select an item then press Enter to display the configuration options. Suspend Mode [Auto] Repost Video on S3 Resume [No] ACPI 2.
ASUS P4B533-X motherboard 2-23 2.5.5 APM Configuration Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit Power Management/APM [Enabled] Power Button Mode [On/Off] R.
2-24 Chapter 2: BIOS information If any of the monitored items is out of range, the following error message appears: “Hardware Monitor found an error . Enter Power setup menu for details”. Y ou will then be prompted to “Press F1 to continue or DEL to enter SETUP”.
ASUS P4B533-X motherboard 2-25 2.6 Boot menu The Boot menu items allow you to change the system boot options. Select an item then press Enter to display the sub-menu. Boot Device Priority Boot Settings Configuration Security Specifies the Boot Device Priority sequence.
2-26 Chapter 2: BIOS information 2.6.3 Boot Settings Configuration Quick Boot [Enabled] Full Screen Logo [Enabled] Add On ROM Display Mode [Force BIOS] Bootup Num-Lock [On] PS/2 Mouse Support [Auto] W.
ASUS P4B533-X motherboard 2-27 Add On ROM Display Mode [Force BIOS] Sets the display mode for option ROM. Configuration options: [Force BIOS] [Keep Current] Bootup Num-Lock [On] Allows you to select the power-on state for the NumLock.
2-28 Chapter 2: BIOS information 2.6.4 Security The Security menu items allow you to change the system security settings. Select an item then press Enter to display the configuration options.
ASUS P4B533-X motherboard 2-29 User Access Level (Full Access] This item allows you to select the access restriction to the Setup items. Configuration options: [No Access] [View Only] [Limited] [Full Access] No Access prevents user access to the Setup utility .
2-30 Chapter 2: BIOS information Exit & Discard Changes Select this option only if you do not want to save the changes that you made to the Setup program. If you made changes to fields other than system date, system time, and password, the BIOS asks for a confirmation before exiting.
Chapter 3 This chapter describes the contents of the support CD that comes with the motherboard package. Software support.
3-2 Chapter 3: Software support 3. 1 Install an oper ating system This motherboard supports Windows ® 98SE/ME/2000/XP operating system (OS). Always install the latest OS version and corresponding updates so you can maximize the features of your hardware.
ASUS P4B533-X motherboard 3-3 3.2.2 Drivers menu The drivers menu shows the available device drivers if the system detects installed devices. Install the necessary drivers to activate the devices.
3-4 Chapter 3: Software support ASUS PC Probe This smart utility monitors the fan speed, CPU temperature, and system voltages, and alerts you on any detected problems.
ASUS P4B533-X motherboard 3-5 3.2.4 ASUS Contact Information Clicking the ASUS Contact Information tab displays as stated. Y ou may also find this information on the inside front cover of this user guide. Screen display and utilities option may not be the same for other operating system version.
3-6 Chapter 3: Software support.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Asus P4B533-X c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Asus P4B533-X - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Asus P4B533-X, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Asus P4B533-X va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Asus P4B533-X, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Asus P4B533-X.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Asus P4B533-X. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Asus P4B533-X ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
