Manuel d'utilisation / d'entretien du produit HDSTB100 du fabricant Palsonic
Aller à la page of 24
PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888 HIGH D.
Table of Contents Set-up and Quick Use Guide ............................ Chapter1:Safety Instructions ........................... Chapter 2: Introduction ..................................... Front and rear view of the STB .................. Remote control functional key list .
SET-UP AND QUICK USE GUIDE 1 Step 1: Connect AC Power Cord Plug the AC power cord into the AC outlet. Do not turn on any devices until you have finished making all necessary connections. Step 2: Antenna Connection Connect the antenna cable to the RF IN jack on the rear panel of the STB (For details, please refer to page 8 ).
CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS INSTALLATION AND OPERATING GUIDE AND THOSE MARKED ON THE UNIT. RETAIN THIS GUIDE FOR FUTURE REFERENCE. This set has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard.
Chapter 2: Introduction 3 Front and rear view of the STB Front View Back View Antenna Input Jack (Connect it to VHF/UHF antenna for terrestrial digital signal input) Antenna Output Jack (Connect it to analog TV tuner's RF in.
Chapter 2: Introduction 4 Remote control function key list Remote control battery installation Detach the battery cover on the rear of the remote control, and insert two size AAA batteries in correct polarity. Caution Do not mix old and new batteries.
Chapter 2: Introduction 5 Remote control functional key list Cautions regarding use of remote control Do not expose the remote control to shock. In addition, do not expose the remote control to liquids, and do not place in an area with high humidity. Do not install or place the remote control under direct sunlight.
Chapter 2: Introduction 6 Remote control functional key list PIP/VCR Switch between PIP and VCR for the secondary program display. Note: For PIP output or VCR output, you can only select one output at the same time. If PIP is selected, then VCR can not be selected; If VCR is selected, then PIP can not be selected.
Chapter 2: Introduction 7 Menu Overview System Menu Overview Press MENU button to access the menu mode. Press button to select and highlight the menu item upward or downward. Press ENTER button to confirm and enter into its sub-menu. In menu operation, press and to navigate in menus, press ENTER to activate the selected menu items .
Chapter 3: Getting Started 8 Connection Connect AC power cord Plug the AC power cord into an AC outlet. Do not turn on any devices until you have finished making all necessary connections.
Chapter 3: Getting Started 9 Connection Display Formats Overview The HD-STB Tuner offers various display formats and multiple video outputs. When the HD-STB Tuner is connected to A/V systems, the HD-STB Tuner can provide video signal formats 1080i, 720p, 576p, or 576i.
Chapter 3: Getting Started 10 Connection Connecting to a HD monitor (YPbPr type) Follow this diagram when connecting. Antenna Rear of HD Ready TV Note: The YPbPr/RGB selection switch must be set to YPbPr. The component out jacks are available when HD1 (576p), HD2 (1080i), or HD3 (720p) display format is selected.
Chapter 3: Getting Started 11 Connection Connecting to a HD monitor (RGB type) Follow this diagram when connecting. Note: The YPbPr/RGB selection switch must be set to RGB. The RGB out jack is available when HD1 (576p), HD2 (1080i), or HD3 (720p) display format is selected.
Chapter 3: Getting Started 12 Connections Connecting to a VCR Follow this diagram when connecting. Rear of STB Note: These connections are only available when VCR is selected by pressing PIP/VCR button. Rear of VCR Connecting to an Amplifier Follow this diagram when connecting.
Chapter 4: Operations 13 Program Search You must perform the program search when using the STB at the first time. There are three ways to search programs: Quick Search, Auto Search and Manual Search.
Chapter 4: Operations 14 SpeProgram Search/Channel & Program selection Manual Search If desired programs can not be searched, you can make use of Manual Search. Press MENU button to access the menu mode. Press button to select and highlight Program .
Chapter 4: Operations 15 Channel Banner Channel Banner You can quickly check the status of current display program by pressing the DSP button. Press DSP button twice to display EPG information if available. Indicator if shows MAIN, it means current operation acts to main picture.
Chapter 4: Operations 16 Audio Setup/Default Setting Audio Setup You can choose different audio outputs in Audio Setup menu. The STB includes standard audio mode options such as stereo or mono sound to match the broadcast signal or your home entertainment stereo system.
Chapter 4: Operations 17 LOCK Settings Password setup The Rating Control lets you set up specific channels and ratings through blocking schemes. To activate or disable all of the lock schemes previously set up, a password is required to gain access to this menu.
Chapter 4: Operations 18 LOCK Settings/Time Zone Selection Rating control Blocks programs according to the program ratings limit so children can not view certain programs. You can set the ratings limit by blocking out all the programs with the ratings above a specified level.
Chapter 5: Appendix 19 DTV Channel Table Following is the list of DTV channels available in your area. You can use it for Manual search. You can check the following list for channel number and channel frequency.
Chapter 5: Appendix 20 Troubleshooting Check the following guide for the possible cause of a problem before contacting service. Symptom Solutions No power. Plug the power cord into the wall outlet securely. No picture. Check your antenna input or location.
Chapter 5: Appendix 21 Specifications Television System PAL, DTV standard (1080i, 720p, 576p, 576i) Channel Coverage Terrestrial: 6-69 ANT Input 1 ANT Output 1 (Out to TV) Component Video Output (YPbP.
PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888 604-DH.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Palsonic HDSTB100 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Palsonic HDSTB100 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Palsonic HDSTB100, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Palsonic HDSTB100 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Palsonic HDSTB100, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Palsonic HDSTB100.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Palsonic HDSTB100. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Palsonic HDSTB100 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
