Manuel d'utilisation / d'entretien du produit M2N DH du fabricant Asus
Aller à la page of 116
Motherboard M2N/ M2N DH.
ii E2753 First Edition August 2006 Copyright © 2006 ASUST eK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmi.
iii Contents Notices ......................................................................................................... vi Safety information ..................................................................................... vii About this guide .
iv Contents 2.6 Jumper ........................................................................................ 2-19 2.7 Connectors ................................................................................. 2-22 2.7.1 Rear panel connectors ....
v Contents 4.4 Advanced menu ......................................................................... 4-19 4.4.1 JumperFree Conguration ............................................ 4-19 4.4.2 CPU Conguration ....................................
vi Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation.
vii Safety information Electrical safety • T o prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected.
viii About this guide This user guide contains the information you need when installing and conguring the motherboard. How this guide is organized This guide contains the following parts: • Chapter 1: Product introduction This chapter describes the features of the motherboard and the new technology it supports.
ix Conventions used in this guide T o make sure that you perform certain tasks properly , take note of the following symbols used throughout this manual. T ypography Bold text Indicates a menu or an item to select. Italics Used to emphasize a word or a phrase.
x M2N/M2N DH specications summary (continued on the next page) CPU Socket AM2 for AMD Athlon™ 64 X2 /AMD Athlon™ 64 /AMD Athlon™ 64 FX /AMD Sempron™ processors Supports AMD Cool ‘n’ Qui.
xi M2N/M2N DH specications summary ASUS Exclusive Overclocking features ASUS O.C. P ro le : ov er clo cki ng co n gur at io n- sha rin g too l Precision T weaker: - Stepless Frequency Selection(SFS) allows FSB tuning from 200 MHz up to 300 MHz at 1 MHz increment Overclocking protection: - ASUS C.
xii Extra specications on M2N DH *Specications are subject to change without notice. ASUS Digital Home Features ASUS WiFi-AP Solo - 54 Mbps IEEE 802.
1 Product introduction This chapter describes the motherboard features and the new technologies it supports..
ASUS M2N / M2N DH Chapter summary 1 1.1 Welcome! ...................................................................................... 1-1 1.2 Package contents ......................................................................... 1-1 1.3 Special features .
ASUS M2N / M2N DH 1-1 1.1 Welcome! Th ank yo u f or b uyi ng an A SUS ® M2N / M2N DH motherboard ! The motherboard delivers a host of new features and latest technologies, making it another standout .
1-2 Chapter 1: Product introduction 1.3 Special features 1.3.1 Product highlights Latest processor technology The motherboard comes with a 940-pin AM2 socket that supports AMD Athlon™ 64 X2/AMD Athlon™ 64/AMD Athlon™ 64 FX/AMD Sempron™ processors.
ASUS M2N / M2N DH 1-3 USB 2.0 technology The motherboard implements the Universal Serial Bus (USB) 2.0 specication, dramatically increasing the connection speed from the 12 Mbps bandwidth on USB 1.1 to a fast 480 Mbps on USB 2.0. USB 2.0 is backward compatible with USB 1.
1-4 Chapter 1: Product introduction 1.3.2 ASUS Special features ASUS Q-Connector ASUS Q-Connector allows you to easily connect or disconnect the chassis front panel cables to the motherboard. This unique module eliminates the trouble of connecting the system panel cables one at a time and avoiding wrong cable connections.
ASUS M2N / M2N DH 1-5 1.3.3 ASUS Digital Home features for M2N DH model ASUS WiFi-AP Solo™ (For M2N DH model only) WiFi AP Solo™ allows a new level of versitility for your PC, enabling it to create a complete wireless home network in either AP or wirelesss client mode.
1-6 Chapter 1: Product introduction.
2 Hardware information This chapter lists the hardware setup procedures that you have to perform when installing system components. It includes description of the jumpers and connectors on the motherboard.
ASUS M2N / M2N DH Chapter summary 2 2.1 Before you proceed ..................................................................... 2-1 2.2 Motherboard overview ................................................................. 2-2 2.3 Central Processing Unit (CPU) .
ASUS M2N / M2N DH 2-1 Onboard LED The motherboard comes with a standby power LED. The green LED lights up to indicate that the system is ON, in sleep mode, or in soft-off mode. This is a reminder that you should shut down the system and unplug the power cable before removing or plugging in any motherboard component.
2-2 Chapter 2: Hardware information R 2.2 Motherboard overview Before you install the motherboard, study the conguration of your chassis to ensure that the motherboard ts into it. 2.2.1 Placement direction When installing the motherboard, make sure that you place it into the chassis in the correct orientation.
ASUS M2N / M2N DH 2-3 2.2.3 Motherboard layout DDR2 DIMM_A1 (64 bit,240-pin module) DDR2 DIMM_B1 (64 bit,240-pin module) DDR2 DIMM_A2 (64 bit,240-pin module) DDR2 DIMM_B2 (64 bit,240-pin module) 20.
2-4 Chapter 2: Hardware information 2.2.4 Layout contents Slots Page 1. DDR2 DIMM slots 2-1 1 2. PCI slots 2-18 3. PCI Express x1 slots 2-18 4. PCI Express x16 slot 2-18 Rear panel connectors Page 1. PS/2 mouse port (green) 2-22 2. Parallel port 2-22 3.
ASUS M2N / M2N DH 2-5 Internal connectors Page 1. Floppy disk drive connector (34-1 pin FLOPPY) 2-23 2. IDE connector (40-1 pin PRI_IDE) 2-24 3. Serial A T A connectors (7-pin SA T A1 [red], SA T A2 [red], SA T A3 [red], SA T A4 [red]) 2-25 4. Serial port connector (10-1 pin COM1) 2-25 5.
2-6 Chapter 2: Hardware information 2.3.1 Installing the CPU T o install a CPU: 1. Locate the CPU socket on the motherboard. Make sure that the socket lever is lifted up to a 90º angle; otherwise, the CPU will not t in completely . 2. Unlock the socket by pressing the lever sideways, then lift it up to a 90º angle.
ASUS M2N / M2N DH 2-7 3. Position the CPU above the socket such that the CPU corner with the gold triangle matches the socket corner with a small triangle. 4. Carefully insert the CPU into the socket until it ts in place. 5. When the CPU is in place, push down the socket lever to secure the CPU.
2-8 Chapter 2: Hardware information 2.3.2 Installing the heatsink and fan The AMD Athlon™ 64/AMD Athlon™ 64 FX/AMD Athlon™ 64 X2 and AMD Sempron™ processors require a specially designed heatsink and fan assembly to ensure optimum thermal condition and performance.
ASUS M2N / M2N DH 2-9 2. Attach one end of the retention bracket to the retention module base. 3. Align the other end of the retention bracket (near the retention bracket lock) to the retention module base. A clicking sound denotes that the retention bracket is in place.
2-10 Chapter 2: Hardware information 5. When the fan and heatsink assembly is in place, connect the CPU fan cable to the connector on the motherboard labeled CPU_F AN. • Do not forget to connect the CPU fan connector! Hardware monitoring errors can occur if you fail to plug this connector .
ASUS M2N / M2N DH 2-11 2.4 System memory 2.4.1 Overview The motherboard comes with four Double Data Rate 2 (DDR2) Dual Inline Memory Modules (DIMM) sockets. A DDR2 module has the same physical dimensions as a DDR DIMM but has a 240-pin footprint compared to the 184-pin DDR DIMM.
2-12 Chapter 2: Hardware information Important notice on installing Windows ® XP 32-bit version If you install Windows ® XP 32-bit version Operating System (OS), the limitation of this OS version is that it may reserve a certain amount of memory space for system devices.
ASUS M2N / M2N DH 2-13 Qualied V endors List DDR2-533 512MB ELPIDA EBE51ED8ABF A-5C-E SS E5108AB-5C-E • • 512MB ELPIDA EBE51UD8ABF A-5C-E SS E5108AB-5C-E • 512MB HYNIX HYMP564U648-C4 SS HY5PS12821F-C4 • 1024MB HYNIX HYMP512U728-C4 AA DS HY5PS12821F-C4 • • 512MB INFINEON HYS64T64000GU-3.
2-14 Chapter 2: Hardware information Qualied V endors List DDR2-800 Side(s) : SS - Single-sided DS - Double-sided DIMM Support: A - Supports one module inserted in any slot for a single-channel memory conguration.
ASUS M2N / M2N DH 2-15 2.4.3 Installing a DIMM Unplug the power supply before adding or removing DIMMs or other system components. Failure to do so can cause severe damage to both the motherboard and the components. T o install a DIMM: 1. Unlock a DIMM socket by pressing the retaining clips outward.
2-16 Chapter 2: Hardware information 2.5 Expansion slots In the future, you may need to install expansion cards. The following sub-sections describe the slots and the expansion cards that they support. 2.5.1 Installing an expansion card T o install an expansion card: 1.
ASUS M2N / M2N DH 2-17 2.5.3 Interrupt assignments Standard interrupt assignments * These IRQs are usually available for ISA or PCI devices. IRQ Priority Standard function 0 1 System T imer 1 2 Keyboa.
2-18 Chapter 2: Hardware information 2.5.4 PCI slots The PCI slots support cards such as a LAN card, SCSI card, USB card, and other cards that comply with PCI specications.
ASUS M2N / M2N DH 2-19 2.6 Jumper 1. Clear RTC RAM (CLRTC) This jumper allows you to clear the Real T ime Clock (RTC) RAM in CMOS. Y ou can clear the CMOS memory of date, time, and system setup parameters by erasing the CMOS RTC RAM data.
2-20 Chapter 2: Hardware information 2. USB device wake-up (3-pin USBPW1234, USBPW5678, USBPW910) Set these jumpers to +5V to wake up the computer from S1 sleep mode (CPU stopped, DRAM refreshed, system running in low power mode) using the connected USB devices.
ASUS M2N / M2N DH 2-21 3. Keyboard power (3-pin KBPWR) This jumper allows you to enable or disable the keyboard wake-up feature. Set this jumper to pins 2-3 (+5VSB) to wake up the computer when you press a key on the keyboard (the default is the Space Bar).
2-22 Chapter 2: Hardware information 2.7 Connectors 2.7.1 Rear panel connectors 1. PS/2 mouse port (green). This port is for a PS/2 mouse. 2. Parallel port . This 25-pin port connects a parallel printer , a scanner , or other devices. 3. LAN (RJ-45) port.
ASUS M2N / M2N DH 2-23 7. Wireless LAN activity LED (M2N DH model only) . The wireless LAN module comes with an activity LED. 8. Wireless LAN antenna port (M2N DH model only) . This port connects to the optional dipolar antenna for the onboard WiFi-g™ wireless solution.
2-24 Chapter 2: Hardware information 2. IDE connector (40-1 pin PRI_IDE) The onboard IDE connector is for the Ultra DMA 133/100/66 signal cable. There are three connectors on each Ultra DMA 133/100/66 signal cable: blue, black, and gray .
ASUS M2N / M2N DH 2-25 3. Serial A T A connectors (7-pin SA T A1 [red], SA T A2 [red], SA T A3 [red], SA T A4 [red]) These connectors are for the Serial A T A signal cables for Serial A T A 3.0 Gb/s hard disk and optical disk drives. The Serial A T A 3.
2-26 Chapter 2: Hardware information 5. USB conne ctors (10-1 pin U SB5 6, USB 78, US B910 [fo r M 2N mod el onl y]) These connectors are for USB 2.0 ports. Connect the USB module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis.
ASUS M2N / M2N DH 2-27 7. CPU, chassis, and power fan connectors (4-pin CPU_F AN, 3-pin CHA_F AN, 3-pin PWR_F AN) The fan c onnect ors su pport co oling fans o f 350 mA ~ 2000 mA (24 W max.
2-28 Chapter 2: Hardware information 9. AT X p owe r c on ne cto rs (24-pin A TXPWR, 4-pin EA TX12V) These connectors are for A TX power supply plugs. The power supply plugs are designed to t these connectors in only one orientation. Find the proper orientation and push down rmly until the connectors completely t.
ASUS M2N / M2N DH 2-29 10. Front panel audio con nec tor (10-1 pin AAFP) This connector is for a chassis-mounted front panel audio I/O module that supports either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel audio I/O module cable to this connector .
2-30 Chapter 2: Hardware information • System power LED (2-pin PLED) This 2-pin connector is for the system power LED. Connect the chassis power LED cable to this connector . The system power LED lights up when you turn on the system power , and blinks when the system is in sleep mode.
ASUS M2N / M2N DH 2-31 Q-Connector (System panel) ASUS Q-Connector allows you to easily to connect the chassis front panel cables to the motherboard. Perform these steps to install ASUS Q-Connector . Step 1 Connect the front panel cables to their respective connectors on the ASUS Q-Connector .
2-32 Chapter 2: Hardware information.
3 Powering up This chapter describes the power up sequence, the vocal POST messages, and ways of shutting down the system..
ASUS M2N / M2N DH Chapter summary 3 3.1 Starting up for the rst time ........................................................ 3-1 3.2 T urning off the computer .
ASUS M2N / M2N DH 3-1 3.1 Starting up for the rst time 1. After making all the connections, replace the system case cover . 2. Be sure that all switches are off. 3. Connect the power cord to the power connector at the back of the system chassis. 4.
3-2 Chapter 3: Powering up 3.2 Powering off the computer 3.2.1 Using the OS shut down function If you are using Windows ® 2000: 1. Click the Start button then click Shut Down... 2. Make sure that the Shut Down option button is selected, then click the OK button to shut down the computer .
4 BIOS setup This chapter tells how to change the system settings through the BIOS Setup menus. Detailed descriptions of the BIOS parameters are also provided.
ASUS M2N / M2N DH Chapter summary 4 4.1 Managing and updating your BIOS ............................................ 4-1 4.2 BIOS setup program .................................................................. 4-10 4.3 Main menu .....................
ASUS M2N / M2N DH 4-1 4.1 Managing and updating your BIOS The following utilities allow you to manage and update the motherboard Basic Input/Output System (BIOS) setup. 1. ASUS EZ Flash 2 (Updates the BIOS using a oppy disk, USB Flash, or the motherboard support CD during POST .
4-2 Chapter 4: BIOS setup 2. Co py the or ig in al or th e lat est mo th er boa rd BI OS l e t o t he b oot abl e op py dis k. T o update the BIOS using EZ Flash 2: 1. Visit the ASUS website (www .asus.com) to download the latest BIOS le for the motherboard.
ASUS M2N / M2N DH 4-3 • This function can support devices such as USB ash disk, or oppy disk with F A T 32/16 format only . • Do not shut down or reset the system while updating the BIOS to prevent system boot failure! 4.
4-4 Chapter 4: BIOS setup Updating the BIOS le T o update the BIOS le using the AFUDOS utility: 1. Visit the ASUS website (www .asus.com) and download the latest BIOS le for the motherboard. Save the BIOS le to a bootable oppy disk. 2. Copy the AFUDOS utility (afudos.
ASUS M2N / M2N DH 4-5 4.1.4 ASUS CrashFree BIOS 3 utility The ASUS CrashFree BIOS 3 is an auto recovery tool that allows you to restore the BIOS le when it fails or gets corrupted during the updating process.
4-6 Chapter 4: BIOS setup Recovering the BIOS from the support CD T o recover the BIOS from the support CD: 1. Remove any oppy disk from the oppy disk drive, then turn on the system.
ASUS M2N / M2N DH 4-7 Installing ASUS Update T o install ASUS Update: 1. Place the support CD in the optical drive. The Drivers menu appears. 2. Click the Utilities tab, then click Install ASUS Update . See page 5-3 for the Utilities screen menu. 3. The ASUS Update utility is copied to your system.
4-8 Chapter 4: BIOS setup 3. Select the ASUS FTP site nearest you to avoid network trafc, or click Auto Select . Click Next . Updating the BIOS through the Internet T o update the BIOS through the Internet: 1. Launch the ASUS Update utility from the Windows ® desktop by clicking Start > Programs > ASUS > ASUSUpdate > ASUSUpdate .
ASUS M2N / M2N DH 4-9 Updating the BIOS through a BIOS le T o update the BIOS through a BIOS le: 1. Launch the ASUS Update utility from the Windows ® desktop by clicking Start > Programs > ASUS > ASUSUpdate > ASUSUpdate. The ASUS Update main window appears.
4-10 Chapter 4: BIOS setup • The default BIOS settings for this motherboard apply for most conditions to ensure optimum performance. If the system becomes unstable after changing any BIOS settings, load the default settings to ensure system compatibility and stability .
ASUS M2N / M2N DH 4-1 1 4.2.2 Menu bar The menu bar on top of the screen has the following main items: Main For changing the basic system conguration Advanced For changing the advanced system setti.
4-12 Chapter 4: BIOS setup 4.2.4 Menu items The highlighted item on the menu bar displays the specic items for that menu. For example, selecting Main shows the Main menu items. The other items (Advanced, Power , Boot, T ool, and Exit) on the menu bar have their respective menu items.
ASUS M2N / M2N DH 4-13 4.3 Main menu When you enter the BIOS Setup program, the Main menu screen appears, giving you an overview of the basic system information. 4.3.1 System Time [xx:xx:xx] Allows you to set the system time. 4.3.2 System Date [Day xx/xx/xxxx] Allows you to set the system date.
4-14 Chapter 4: BIOS setup 4.3.4 IDE Conguration The items in this menu allow you to set or change the congurations for the IDE devices installed in the system.
ASUS M2N / M2N DH 4-15 4.3.5 Primary IDE Master/ Slave While entering Setup, the BIOS automatically detects the presence of IDE devices. There is a separate sub-menu for each IDE device. Select a device item then press <Enter> to display the IDE device information.
4-16 Chapter 4: BIOS setup PIO Mode [Auto] Selects the PIO mode. Conguration options: [Auto] [0] [1] [2] [3] [4] DMA Mode [Auto] Selects the DMA mode.
ASUS M2N / M2N DH 4-17 4.3.6 SA T A1, SA T A2, SA T A3, SA T A4 While entering Setup, the BIOS automatically detects the presence of Serial A T A devices. There is a separate sub-menu for each Serial A T A device. Select a device item then press <Enter> to display the Serial A T A device information.
4-18 Chapter 4: BIOS setup 4.3.7 System Information This menu gives you an overview of the general system specications. The BIOS automatically detects the items in this menu.
ASUS M2N / M2N DH 4-19 4.4 Advanced menu The Advanced menu items allow you to change the settings for the CPU and other system devices. T ake caution when changing the settings of the Advanced menu items. Incorrect eld values can cause the system to malfunction.
4-20 Chapter 4: BIOS setup The following items appear only when the AI overclocking item is set to [Manual]. CPU Frequency [200] Displays the frequency sent by the clock generator to the system bus and PCI bus. The value of this item is auto-detected by the BIOS.
ASUS M2N / M2N DH 4-21 4.4.2 CPU Conguration The items in this menu show the CPU-related information that the BIOS automatically detects. CPU Conguration Module Version: 13.
4-22 Chapter 4: BIOS setup 4.4.3 Chipset The Chipset menu allows you to change the advanced chipset settings. Select an item then press <Enter> to display the sub-menu. Memory Controller SouthBridge Conguration Hyper Transport Conguration Options for NB.
ASUS M2N / M2N DH 4-23 MCT Timing Mode [Auto] Sets the MCT Timing mode. Conguration options: [Auto] [Manual] CAS Latency (CL) [Auto] Conguration options: [Auto] [3.0] [4.0] [5.0] [6.0] TRAS [Auto] Conguration options: [Auto] [5 CLK] [6 CLK]..
4-24 Chapter 4: BIOS setup MemClk T ristate C3/A TL VID [Disabled] Enables or disables the MemClk T ri-Stating during C3 and Alt VID. Configuration options: [Enabled] [Disabled] Memory Hole Remapping [Enabled] Enables or disables the memory remapping around the memory hole.
ASUS M2N / M2N DH 4-25 Hyper Transport MCP61 Conguration MCP61(SB) to K8(CPU) Freq Auto [Disabled] MCP61(SB) to K8(CPU) Frequency [1000 MHz] MCP61(SB) to K8(CPU) LinkWidth [16 ↑ 16 ↓ ] Hyper T .
4-26 Chapter 4: BIOS setup ECP Mode DMA Channel [DMA3] Appears only when the Parallel Port Mode is set to [ECP] or [EPP+ECP]. This item allows you to set the Parallel Port ECP DMA. Conguration options: [DMA0] [DMA1] [DMA3] EPP V ersion [1.9] Appears only when the Parallel Port Mode is set to [EPP] or [EPP+ECP].
ASUS M2N / M2N DH 4-27 USB 1.1 Controller [Enabled] Allows you to disable or enable the USB 1.1 controller . Conguration options: [Disabled] [Enabled] USB 2.
4-28 Chapter 4: BIOS setup 4.5 Power menu The Power menu items allow you to change the settings for the Advanced Power Management (APM). Select an item then press <Enter> to display the conguration options.
ASUS M2N / M2N DH 4-29 4.5.5 APM Conguration APM Conguration Power Button Mode [On/Off] Restore on AC Power Loss [Last State] Power On By PCI Devices [Disabled] Power On By PCIE Devices [Disable.
4-30 Chapter 4: BIOS setup Power On By PS/2 KB/MS [Disabled] Allows you to use specic keys on the keyboard or use the PS/2 mouse to turn on the system.
ASUS M2N / M2N DH 4-31 VCORE V oltage, 3.3V V oltage, 5V V oltage, 12V V oltage The onboard hardware monitor automatically detects the voltage output through the onboard voltage regulators. Smart Q-Fan Function [Ensabled] Allows you to enable or disable the Q-Fan function that monitors the CPU/system temperature and smartly adjust the fan speed.
4-32 Chapter 4: BIOS setup 4.6.2 Boot Settings Conguration Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit Boot Settings Conguration Quick Boot [Enabled] Fu.
ASUS M2N / M2N DH 4-33 If you forget your BIOS password, you can clear clear it by erasing the CMOS Real T ime Clock (RTC) RAM. See section “2.6 Jumpers” for information on how to erase the RTC RAM. Hit ‘DEL’ Message Display [Enabled] When set to Enabled, the system displays the message “Press DEL to run Setup” during POST .
4-34 Chapter 4: BIOS setup After you have set a supervisor password, the other items appear to allow you to change other security settings. User Access Level [Full Access] This item allows you to select the access restriction to the Setup items.
ASUS M2N / M2N DH 4-35 Password Check [Setup] When set to [Setup], BIOS checks for user password when accessing the Setup utility . When set to [Always], BIOS checks for user password both when accessing Setup and booting the system. Conguration options: [Setup] [Always] 4.
4-36 Chapter 4: BIOS setup Select Screen Select Item Enter Go to Sub Screen F1 General Help F10 Save and Exit ESC Exit v02.58 (C)Copyright 1985-2006, American Megatrends, Inc. BIOS SETUP UTILITY Tools O.C. PROFILE Conguration O.C. Prole 1 Status : Not Installed O.
ASUS M2N / M2N DH 4-37 Exit & Discard Changes Select this option only if you do not want to save the changes that you made to the Setup program. If you made changes to elds other than System Date, System T ime, and Password, the BIOS asks for a conrmation before exiting.
4-38 Chapter 4: BIOS setup.
5 Software support This chapter describes the contents of the support CD that comes with the motherboard package..
ASUS M2N / M2N DH Chapter summary 5 5.1 Installing an operating system ................................................... 5-1 5.2 Support CD information .............................................................. 5-1 5.3 RAID congurations .....
ASUS M2N / M2N DH 5-1 If Autorun is NOT enabled in your computer , browse the contents of the support CD to locate the le ASSETUP .EXE from the BIN folder . Double-click the ASSETUP .EXE to run the CD. Click an item to install 5.1 Installing an operating system This motherboard supports Windows ® 2000/XP/64-bit XP operating systems (OS).
5-2 Chapter 5: Software support 5.2.2 Drivers menu The drivers menu shows the available device drivers if the system detects installed devices. Install the necessary drivers to activate the devices. ASUS InstAll - Installation Wizard for Drivers Launches the ASUS InstallAll driver installation wizard.
ASUS M2N / M2N DH 5-3 5.2.3 Utilities menu The Utilities menu shows the applications and other software that the motherboard supports. ASUS InstAll - Installation Wizard for Utilities Launches the ASUS InstallAll utilities installation wizard.
5-4 Chapter 5: Software support Anti-Virus Utility The anti-virus application scans, identies, and removes computer viruses. View the online help for detailed information. ASUS Screen Saver Bring life to your computer screen by installing the ASUS screen saver .
ASUS M2N / M2N DH 5-5 5.2.5 Manuals menu The Manuals menu contains a list of supplementary user manuals. Click an item to open the folder of the user manual. Most user manual les are in Portable Document Format (PDF). Install the Adobe ® Acrobat ® Reader from the Utilities menu before opening a user manual le.
5-6 Chapter 5: Software support 5.2.7 Other information The icons on the top right corner of the screen give additional information on the motherboard and the contents of the support CD. Click an icon to display the specied information. Motherboard Info Displays the general specications of the motherboard.
ASUS M2N / M2N DH 5-7 T echnical support Form Displays the ASUS T echnical Support Request Form that you have to ll out when requesting technical support.
5-8 Chapter 5: Software support 5.3 RAID congurations The motherboard comes with the NVIDIA ® MediaShield™ RAID controllers that allow you to congure Serial A T A hard disk drives as RAID sets. The motherboard supports the following RAID congurations.
ASUS M2N / M2N DH 5-9 5.3.1 Installing hard disks The motherboard supports Serial A T A hard disk drives. For optimal performance, install identical drives of the same model and capacity when creating a disk array . Installing Serial A T A (SA T A) hard disks T o install the SA T A hard disks for a RAID conguration: 1.
5-10 Chapter 5: Software support Entering the NVIDIA ® MediaShield RAID utility T o enter the NVIDIA ® RAID utility: 1. Boot up your computer . 2. During POST , press <F10> to display the main menu of the utility . The RAID BIOS setup screens shown in this section are for reference only , and may not exactly match the items on your screen.
ASUS M2N / M2N DH 5-1 1 TIP: For server systems, we recommend using a lower array block size. For multimedia computer systems used mainly for audio and video editing, we recommend a higher array block size for optimum performance. T ake caution in using this option.
5-12 Chapter 5: Software support Rebuilding a RAID array T o rebuild a RAID array: 1. From the Array List menu, use the up or down arrow keys to select a RAID array then press <Enter>.
ASUS M2N / M2N DH 5-13 A new set of navigation keys is displayed on the bottom of the screen. 2. Press <R> to rebuild a RAID array . The following screen appears. 3. Use the up or down arrow keys to select a RAID array to rebuild, then press <F7>.
5-14 Chapter 5: Software support Deleting a RAID array T o delete a RAID array: 1. From the Array List menu, use the up or down arrow keys to select a RAID array then press <Enter>. The RAID Array details appear . [R] Rebuild [D] Delete [C] Clear Disk [ENTER] Return Array 1 : NVIDIA MIRROR XXX.
ASUS M2N / M2N DH 5-15 Clearing a disk data T o clear disk data: 1. From the Array List menu, use the up or down arrow keys to select a RAID array then press <Enter>. The RAID Array details appear . [R] Rebuild [D] Delete [C] Clear Disk [ENTER] Return Array 1 : NVIDIA MIRROR XXX.
5-16 Chapter 5: Software support 5.4 Creating a RAID driver disk A oppy disk with the RAID driver is required when installing Windows ® 2000/XP operating system on a hard disk drive that is included in a RAID set. T o create a RAID driver disk: 1.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Asus M2N DH c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Asus M2N DH - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Asus M2N DH, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Asus M2N DH va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Asus M2N DH, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Asus M2N DH.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Asus M2N DH. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Asus M2N DH ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
