Manuel d'utilisation / d'entretien du produit KCMA-D8 du fabricant Asus
Aller à la page of 152
Motherboard KCMA-D8.
ii E6016 First Edition V1 October 2010 Copyright © 2010 ASUST eK COMPUTER INC. All Rights Reserved. No part of this ma nual, including the products and soft ware described in i t, may be reproduc ed,.
iii Contents Contents ...................................................................................................... iii Notices ........................................................................................................ vii Safety information .
iv Contents 2.5.5 PCI Express x8 slot (x4 link) ......................................... 2-23 2.5.6 PCI slots ........................................................................ 2-23 2.5.7 PIKE slot ..............................................
v Contents 4.3 Main menu .................................................................................. 4-10 4.3.1 System T ime [xx:xx:xx] ................................................. 4-10 4.3.2 System Date [Day xx/xx/xxxx] ..................
vi 5.2 FastBuild Utility ............................................................................ 5-5 5.2.1 Creating a RAID set (RAID 0, RAID 1, RAID 10, RAID 5, SP AN or JBOD) ................................................. 5-6 5.2.2 Deleting a RAID set .
vii Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation.
viii Safety information Electrical safety • T o prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected.
ix About this guide This user guide contains the information you need when installing and conguring the motherboard. How this guide is organized This user guide contains the following parts: • Chapter 1: Product introduction This chapter describes the features of the motherboard and the new technologies it supports.
x Conventions used in this guide T o make sure that you perform certain tasks properly , take note of the following symbols used throughout this manual. T ypography Bold text Indicates a menu or an item to select. Italics Used to emphasize a word or a phrase.
xi KCMA-D8 specications summary Processor Support / System Bus 2 x socket C32 (LGA 1207) 4/6 Core AMD ® Opteron ™ 4100 Series HyperT ransport™ T echnology 3.0, 6.4 GT/s per link (dual link) Core Logic AMD ® SR5670 AMD ® SP5100 Form Factor 12” x 10” ASUS Features Fan Speed Control V Rack Ready (Rack and Pedestal dual use) V ASWM 2.
xii KCMA-D8 specications summary *Specications are subject to change without notice. DO NOT touch the Northbridge chipset! The Northbridge chipset may become overheated.
1 Chapter 1: Product introduction This chapter describes the motherboard features and the new technologies it supports..
ASUS KCMA-D8 Chapter summary 1 1.1 Welcome! ...................................................................................... 1-3 1.2 Package contents ......................................................................... 1-3 1.3 Serial number label .
ASUS KCMA-D8 1-3 1.1 Welcome! Thank you for buying an ASUS ® KCMA-D8 motherboard! The motherboard delivers a host of new features and latest technologies, making it another standout in the long line .
1-4 Chapter 1: Product introduction 1.4 Special features 1.4.1 Product highlights Latest processor technology This motherboard supports the latest AMD ® Opteron™ 4100 series processors in LGA 1207 package with integrated memory controller to support 2-channel (4 DIMMs per CPU) DDR3 memory .
ASUS KCMA-D8 1-5 DDR3 memory support The KCMA-D8 supports UDIMM and RDIMM DDR3 memory that features data transfer rates of 1333/1066/800 MHz to meet the higher bandwidth requirements of server and workstation applications. The 2-channel DDR3 architecture boosts system performance, eliminating bottlenecks with peak bandwidth of up to 21GB/s.
1-6 Chapter 1: Product introduction 1.4.2 Innovative ASUS features ASUS Fan Speed technology The ASUS Fan Speed technology smartly adjusts the fan speeds according to the system loading to ensure quiet, cool, and efcient operation. PIKE (Proprietary I/O Kit Expansion) PIKE is an on-demand upgrade kit for users.
2 Chapter 2: Hardware information This chapter lists the hardware setup procedures that you have to perform when installing system components. It includes description of the jumpers and connectors on the motherboard.
ASUS KCMA-D8 Chapter summary 2 2.1 Before you proceed ..................................................................... 2-3 2.2 Motherboard overview ................................................................. 2-6 2.3 Central Processing Unit (CPU) .
ASUS KCMA-D8 2-3 2.1 Before you proceed T ake note of the following precautions before you install motherboard components or change any motherboard settings.
2-4 Chapter 2: Hardware information 2. CPU warning LED (ERR_CPU1, ERR_CPU2) The CPU warning LEDs light up to indicate that an impending failure of the corresponding CPU. 3. DIMM warning LED (ERR_DIMMA1/2; ERR_DIMMB1/2; ERR_DIMMC1/2; ERR_DIMMD1/2) The DIMM warning LEDs light up to indicate that an impending failure of the corresponding DIMMs.
ASUS KCMA-D8 2-5 4. BMC LED (BMC_LED1) The green heartbeat LED blinks per second to indicate that the ASMB4 is working normally . The heartbeat LED functions only when you install the ASUS ASMB4.
2-6 Chapter 2: Hardware information 2.2 Motherboard overview Before you install the motherboard, study the conguration of your chassis to ensure that the motherboard ts into it. T o optimize the motherboard features, we highly recommend that you install it in an SSI EEB 1.
ASUS KCMA-D8 2-7 2.2.3 Motherboard layouts.
2-8 Chapter 2: Hardware information 2.2.4 Layout contents Slots/Soocket Page 1. CPU sockets 2-10 2. DDR3 sockets 2-18 3. PCI Express x16 / PCI Express x8 / PCI / MIO slots 2-23 4. PIKE slot 2-23 Jumpers Page 1. Clear RTC RAM (CLR TC1) 2-27 2. VGA controller setting (3-pin VGA_SW1) 2-28 3.
ASUS KCMA-D8 2-9 Internal connectors Page 1. Serial A T A connectors (7-pin SA T A1, SA T A2, SA T A3, SA T A4; RED) (7-pin SA T A5, SA T A6; Black) 2-32 2. SAS connectors (7-pin SAS1, SAS2, SAS3, SAS4; Red) (7-pin SAS5, SAS6, SAS7, SAS8; Blue) 2-33 3.
2-10 Chapter 2: Hardware information 2.3.1 Installing the CPU T o install a CPU: 1. Locate the CPU socket on the motherboard. Before installing the CPU, ensure that the socket box is facing toward you and the load lever is on your left.
ASUS KCMA-D8 2-1 1 T o prevent damage to the socket pins, do not remove the PnP cap unless you are installing a CPU. 2. Press the load lever with your thumb (A), then move it to the left (B) until it is released from the retention tab. 3. Lift the load lever in the direction of the arrow to a 135º angle.
2-12 Chapter 2: Hardware information Apply some Thermal Interface Material to the exposed area of the CPU that the heatsink will be in contact with, ensuring that it is spread in an even thin layer . Some heatsinks come with pre-applied Thermal Interface Material.
ASUS KCMA-D8 2-13 2. Place one retension module on the screw stand. 3. Use the screw that comes with the retension module to secure the retension module to the motherboard. 4. Repeat steps 2 to 3 to install the other retension module to the motherboard.
2-14 Chapter 2: Hardware information 2.3.3 Installing the CPU heatsink and fan assembly The AMD ® Opteron™ 4100 series processors require a specially designed heatsink and fan assembly to ensure optimum thermal condition and performance. • Ensure to use qualied heatsink and fan assembly only .
ASUS KCMA-D8 2-15 2. Attach one end of the retention bracket to the retention module base. 3. Align the other end of the retention bracket to the retention module base.
2-16 Chapter 2: Hardware information 6. Repeat steps 1 to 5 to install the other heatsink and fan assembly if you have installed a second CPU, then connect the fan cable to the other 4-pin connector . 5. When the heatsink and fan assembly is in place, connect the CPU fan cable to the connector on the motherboard labeled CPU_F AN.
ASUS KCMA-D8 2-17 2.3.4 Installing the CPU heatsink Y ou may want to install your optional CPU heatsink instead of the CPU heatsink and fan assembly . T o install the CPU heatsink: 1.
2-18 Chapter 2: Hardware information 2.4 System memory 2.4.1 Overview The motherboard comes with eight (8) Double Data Rate 3 (DDR3) Dual Inline Memory Modules (DIMM) sockets. A DDR3 module has the same physical dimensions as a DDR2 DIMM but is notched differently to prevent installation on a DDR2 DIMM socket.
ASUS KCMA-D8 2-19 2.4.2 Memory Congurations Y ou may install 1GB/2GB/4GB/8GB/16GB Registerd or 1GB/2GB/4GB Unbuffered with ECC/Non-ECC DDR3 DIMMs into the DIMM sockets using the memory congurations in this section. • Always install DIMMs with the same CAS latency .
2-20 Chapter 2: Hardware information 2.4.3 Installing a DIMM Unplug the power supply before adding or removing DIMMs or other system components. Failure to do so can cause severe damage to both the motherboard and the components. T o install a DIMM: 1.
ASUS KCMA-D8 2-21 2.5 Expansion slots In the future, you may need to install expansion cards. The following subsections describe the slots and the expansion cards that they support.
2-22 Chapter 2: Hardware information * These IRQs are usually available for ISA or PCI devices. IRQ Priority Standard function 0 1 System T imer 1 2 Keyboard Controller 2 - Programmable Interrupt 3* 1.
ASUS KCMA-D8 2-23 2.5.4 PCI Express x16 slots (x16 link; x8 link) The onboard PCI Express x16 slots provides one x16 link and one x8 link to AMD SR5670 chipset. These slots support VGA cards and various server class high performance add-on cards. 2.5.
2-24 Chapter 2: Hardware information 2.5.8 Installing an ASUS PIKE RAID card Follow the ste ps below to ins tall an option al ASUS RAID card on your moth erboard. 1. Locate the PIKE RAID card slot on the motherboard. 2. Align the golden ngers of the RAID card with the PIKE RAID card slot.
ASUS KCMA-D8 2-25 2.5.10 Installing ASMB4 management card Follow the steps below to install an optional ASMB4 management card on your motherboard. 1. Locate the BMC_FW header on the motherboard. 2. Orient and press the ASMB4 management card in place. 2.
2-26 Chapter 2: Hardware information 2.5.1 1 Connecting the thermal sensor cable Follow the steps below to connect the thermal sensor cable to the connector on your motherboard. 1. Locate the TR1 or TR2 connector on the motherboard. 2. Connect the thermal sensor cable to the connector .
ASUS KCMA-D8 2-27 2.6 Jumpers 1. Clear RTC RAM (CLRTC1) This jumper allows you to clear the Real T ime Clock (RTC) RAM in CMOS. Y ou can clear the CMOS memory of date, time, and s ystem setup parameters by erasing the CMOS RTC RAM data.
2-28 Chapter 2: Hardware information 2. VGA controller setting (3-pin VGA_SW1) This jumper allows you to enable or disable the onboard VGA controller . Set to pins 1–2 to activate the VGA feature. 3. CPU Fan and Chassis Fan control setting (3-pin CPUF AN_SEL1, CHAF AN_SEL1) These jumpers allow you to switch for fan pin selection.
ASUS KCMA-D8 2-29 4. DDR3 voltage control setting (4-pin L VDDR3_SEL1; L VDDR3_SEL2) These jumpers allow you to adjust the DIMM voltage. Set to pins 1–2 to select 1.5V BIOS c ontrol, pins 2–3 to s elect 1.2V Force or 3–4 to select 1.35V Force. 5.
2-30 Chapter 2: Hardware information 6. LAN controller setting (3-pin LAN_SW1; LAN-SW2) These jumpers allow you to enable or disable the onboard Intel ® Gigabit LAN controllers.
ASUS KCMA-D8 2-31 2.7 Connectors 2.7.1 Rear panel connectors 1. PS/2 mouse port (green). This port is for a PS/2 mouse. 2. RJ-45 port for iKVM. This RJ-45 port functions only when you install ASMB4 management card. 3. PS/2 keyboard port (purple). This port is for a PS/2 keyboard.
2-32 Chapter 2: Hardware information 2.7.2 Internal connectors 1. Serial A T A connectors (7-pin SA T A1, SA T A2, SA T A3, SA T A4; RED) (7-pin SA T A5, SA T A6; Black) Supported by the AMD ® SP5100 chipset, these connectors are for the Serial A T A signal cables for Serial A T A hard disk drives that allows up to 3Gb/s of data transfer rate.
ASUS KCMA-D8 2-33 2. SAS connectors (7-pin SAS1, SAS2, SAS3, SAS4; Red) (7-pin SAS5, SAS6, SAS7, SAS8; Blue) Thi s moth erboa rd comes with eight (8) S erial Attac hed SC SI (S AS) co nnect ors , the next- genera tion s torag e t echnol ogy th at su ppo rts both Serial Attac hed SCS I (SAS ) and Serial A T A (SA T A).
2-34 Chapter 2: Hardware information 3. USB connector (10-1 pin USB34, USB56; A-T ype USB7) These connectors are for USB 2.0 ports. Connect the USB module cables to connectors USB34 and USB56, then install the modules to a slot opening at the back of the system chassis.
ASUS KCMA-D8 2-35 5. CPU, front and rear fan connectors (4-pin CPU_F AN1, CPU_F AN2, FRNT_F AN1, FRNT_F AN2, FRNT_F AN3, FRNT_F AN4, FRNT_F AN5, REAR_F AN1) The fan connectors support cooling fans of 350 mA–740 mA (8.88 W max.) or a total of 3.15 A–6.
2-36 Chapter 2: Hardware information 6. Serial General Purpose Input/Output connectors (8-1 pin SGPIO1/2) These connectors are used for the SAS chip SGPIO interface that controls the LED pattern generation, device information and general purpose data.
ASUS KCMA-D8 2-37 9. BMC header (BMC_FW1) The BMC connector on the motherboard supports an ASUS ® Server Management Board 4 Series (ASMB4). 8. Serial port connector (10-1 pin COM2) This connector is for the serial (COM) port.
2-38 Chapter 2: Hardware information 10. Power Supply SMBus connector (5-pin PSUSMB1) This connector allows you to connect SMBus (System Management Bus) to the power supply unit to read PSU information. Devices communicate with an SMBus host and/or other SMBus devices using the SMBus interface.
ASUS KCMA-D8 2-39 12. 24+8-pin power connectors (24-pin A TXPWR1, 8-pin A TX12V1) These connectors are for the SSI or A TX power supply plugs. The power supply plugs are designed to t these connectors in only one orientation. Find the proper orientation and push down rmly until the connectors completely t.
2-40 Chapter 2: Hardware information 13. System panel connector (20-pin P ANEL1) This connector supports several chassis-mounted functions. 1. System power LED (3-pin PLED) This 3-pin connector is for the system power LED. Connect the chassis power LED cable to this connector .
ASUS KCMA-D8 2-41 14. Auxiliary panel connector (20-pin AUX_P ANEL1) This connector is for additional front panel features including front panel SMB, locator LED and switch, chassis intrusion, and LAN LEDs. 1. Front panel SMB (6-1 pin FPSMB) These leads connect the front panel SMBus cable.
2-42 Chapter 2: Hardware information.
3 Chapter 3: Powering up This chapter describes the power up sequence, and ways of shutting down the system..
ASUS KCMA-D8 Chapter summary 3 3.1 Starting up for the rst time ........................................................ 3-3 3.2 Powering off the computer .
ASUS KCMA-D8 3-3 3.1 Starting up for the rst time 1. After making all the connections, replace the system case cover . 2. Be sure that all switches are off. 3. Connect the power cord to the power connector at the back of the system chassis. 4. Connect the power cord to a power outlet that is equipped with a surge protector .
3-4 Chapter 3: Powering up 3.2 Powering off the computer 3.2.1 Using the OS shut down function If you are using Windows ® 2003 Server: 1. Click the Start button then click Shut Down . 2. Select Shut Down from the What do you want the computer to do? list box.
4 Chapter 4: BIOS setup This chapter tells how to change the system settings through the BIOS Setup menus. Detailed descriptions of the BIOS parameters are also provided.
Chapter summary 4 ASUS KCMA-D8 4.1 Managing and updating your BIOS ............................................ 4-3 4.2 BIOS setup program .................................................................... 4-7 4.3 Main menu .........................
ASUS KCMA-D8 4-3 4.1 Managing and updating your BIOS The following utilities allow you to manage and update the motherboard Basic Input/Output System (BIOS) setup: 1. ASUS EZ Flash 2 (Updates the BIOS using a USB ash disk.) 2. BUPDA TER utility (Updates the BIOS in DOS mode using a bootable USB ash disk drive.
4-4 Chapter 4: BIOS setup 3. Press <T ab> to switch between drives until the correct BIOS le is found. When found, EZ Flash 2 performs the BIOS update process and automatically reboots the system when done. • This function can support devices such as a USB ash disk with F A T 32/16 format and single partition only .
ASUS KCMA-D8 4-5 4. The utility veries the le, then starts updating the BIOS le. DO NOT shut down or reset the system while updating the BIOS to prevent system boot failure! ASUSTek BIOS Update for DOS V1.
4-6 Chapter 4: BIOS setup 4.1.3 ASUS CrashFree BIOS 3 utility The ASUS CrashFree BIOS 3 is an auto recovery tool that allows you to restore the BIOS le when it fails or gets corrupted during the updating process. Y ou can update a corrupted BIOS le using a USB ash drive that contains the updated BIOS le.
ASUS KCMA-D8 4-7 4.2 BIOS setup program This motherboard supports a programmable rmware chip that you can update using the provided utility described in section 4.1 Managing and updating your BIOS . Use the BIOS Setup program when you are installing a motherboard, reconguring your system, or prompted to “Run Setup.
4-8 Chapter 4: BIOS setup 4.2.2 Menu bar The menu bar on top of the screen has the following main items: Main For changing the basic system conguration Advanced For changing the advanced system set.
ASUS KCMA-D8 4-9 4.2.4 Menu items The highlighted item on the menu bar displays the specic items for that menu. For example, selecting Main shows the Main menu items. The other items (Advanced, Power , Boot, and Exit) on the menu bar have their respective menu items.
4-10 Chapter 4: BIOS setup 4.3 Main menu When you enter the BIOS Setup program, the Main menu screen appears, giving you an overview of the basic system information. 4.3.1 System Time [xx:xx:xx] Allows you to set the system time. 4.3.2 System Date [Day xx/xx/xxxx] Allows you to set the system date.
ASUS KCMA-D8 4-1 1 4.3.3 SA T A1–6 The items in this menu allow you to set or change the congurations for the SA T A devices installed in the system.
4-12 Chapter 4: BIOS setup PIO Mode [Auto] Allows you to select the data transfer mode. Conguration options: [Auto] [0] [1] [2] [3] [4] DMA Mode [Auto] DMA (Direct Memory Access) allows your computer to transfer data to and from the hardware devices installed with much less CPU overhead.
ASUS KCMA-D8 4-13 The following two items appear only when you set the OnChip SA T A Channel item to [Enabled]. SA T A Port1 - Port4 [IDE] Sets the conguration for the Serial A T A connectors supported by the Southbridge chip.
4-14 Chapter 4: BIOS setup BIOS Information Displays the auto-detected BIOS information. Processor Displays the auto-detected CPU specication. System Memory Displays the auto-detected system memory . System Memory Information Displays system memory information.
ASUS KCMA-D8 4-15 4.4 Advanced menu The Advanced menu items allow you to change the settings for the CPU and other system devices. T ake caution when changing the settings of the Advanced menu items. Incorrect eld values can cause the system to malfunction.
4-16 Chapter 4: BIOS setup GART Error Reporting [Disabled] This option should remain disabled for the normal operation. The driver developer may enable it for testing purpose. Conguration options: [Disabled] [Enabled] Microcode Updation [Enabled] Allows the system to update the Microcode automatically , enhancing system performance.
ASUS KCMA-D8 4-17 v02.61 (C)Copyright 1985-2010, American Megatrends, Inc. BIOS SETUP UTILITY Advanced Advanced Chipset Settings NorthBridge Conguration SouthBridge Conguration SR5670 Conguration ←→ Select Screen ↑↓ Select Item Enter Go to Sub Screen F1 General Help F10 Save and Exit ESC Exit 4.
4-18 Chapter 4: BIOS setup Memory Conguration The memory conguration menu allows you to change the memory settings. V02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
ASUS KCMA-D8 4-19 v02.61 (C)Copyright 1985-2010, American Megatrends, Inc. BIOS SETUP UTILITY Advanced ECC Conguration ECC Mode [Basic] DRAM ECC Enable [Enabled] DRAM SCRUB REDIRECT [Disabled] 4-Bi.
4-20 Chapter 4: BIOS setup SouthBridge Conguration v02.61 (C)Copyright 1985-2010, American Megatrends, Inc. BIOS SETUP UTILITY Advanced ←→ Select Screen ↑↓ Select Item Enter Go to Sub Screen F1 General Help F10 Save and Exit ESC Exit Options for SB HD Azalia SouthBridge Chipset Conguration SP5100 CIMx Version : 5.
ASUS KCMA-D8 4-21 SDIN0/1/2/3 Pin Config [Azalia] Selects the SDIN Pin setting. Conguration options: [GPIO] [Azalia] The following items appear when HD Audio Azalia Device is set to [Auto] or [Enabled].
4-22 Chapter 4: BIOS setup SA T A-AHCI Ports Auto Clk Ctrl [Disabled] When set to [Enabled], the s ystem will turn of f the clocks for the unused SA T A ports in AHCI modes. Doing so will enable some power savings. Conguration options: [Disabled] [Enabled] The hot-plug function will be disabled when turning off the clock for the SA T A port.
ASUS KCMA-D8 4-23 SR5670 Conguration v02.61 (C)Copyright 1985-2010, American Megatrends, Inc. Advanced ←→ Select Screen ↑↓ Select Item Enter Go to Sub Screen F1 General Help F10 Save and Ex.
4-24 Chapter 4: BIOS setup NB-SB Port Features Press <Enter> to display the sub-items. NB-SB Link ASPM [L1] Conguration options: [Disabled] [L1] NP NB-SB VC1 T rafc Support [Disabled] Con.
ASUS KCMA-D8 4-25 Hyper T ransport Conguration HT Extended Address [Disabled] Conguration options: [Auto] [Disabled] [Enabled] HT3 Link Power State [Auto] Conguration options: [Auto] [LS0] [L.
4-26 Chapter 4: BIOS setup Debug Option Memory Decode on Sec. GFX [Disabled] Conguration options: [Disabled] [Force] IOC Peer-to-Peer Mode [Auto] Conguration options: [Auto] [Default] [Mode 1] [Mode 2] Northbridge interrupt pin [Disabled] Conguration options: [Disabled] [Enabled] v02.
ASUS KCMA-D8 4-27 Serial Port1 Address [3F8/IRQ4] Allows you to select the Serial Port1 base address. Conguration options: [Disabled] [3F8/IRQ4] [3E8/IRQ4] [2E8/IRQ3] Serial Port2 Address [2F8/IRQ3] Allows you to select the Serial Port2 base address.
4-28 Chapter 4: BIOS setup The USB Devices Enabled item shows the auto-detected values. If no USB device is detected, the item shows None . Legacy USB Support [Enabled] Allows you to enable or disable support for legacy USB devices. Setting to [Auto] allows the system to detect the presenc e of USB devices at startup.
ASUS KCMA-D8 4-29 4.4.5 PCIPnP The PCIPnP menu items allow you to change the advanced settings for PCI/PnP devices. T ake caution when changing the settings of the PCI/PnP Conguration menu items. Incorrect eld values can cause the system to malfunction.
4-30 Chapter 4: BIOS setup Remote Access Conguration The items in this menu allows you to congure the Remote Access features. Select an item then press <Enter> to display the conguration options. Remote Access [Enabled] Enables or disables the remote access feature.
ASUS KCMA-D8 4-31 Serial port number [COM2] Selects the serial port for console redirection. Conguration options: [COM1] [COM2] Base Address. IRQ [2F8h, 3] This item is not u ser-congurable and cha nges with the congur ation of Serial port number .
4-32 Chapter 4: BIOS setup 4.6 Power menu The Power menu items allow you to change the settings for the Advanced Power Management (APM). Select an item then press <Enter> to display the conguration options. v02.61 (C)Copyright 1985-2010, American Megatrends, Inc.
ASUS KCMA-D8 4-33 Restore on AC Power Loss [Last State] When set to [Power Off], the system goes into of f state after an AC power loss. When set to [Power On], the system will reboot after an AC power loss. When set to [Last State], the system goes into either off or on state, whatever the system state was before the AC power loss.
4-34 Chapter 4: BIOS setup 4.6.6 Hardware Monitor v02.61 (C)Copyright 1985-2010, American Megatrends, Inc. BIOS SETUP UTILITY Power Hardware Monitor CPU1 Temperature [ 38 ºC/ 100 ºF] CPU2 Temperatur.
ASUS KCMA-D8 4-35 Fan Speed Control [Generic Mode] Allows you to congure the ASUS Smart Fan feature that smartly adjusts the fan speeds for more efcient system operation. Conguration options: [Full Speed Mode] [Whisper Mode] [Generic Mode] [High Density Mode] VCORE1/2 V oltage, P1/2DDR3 V oltage, P1/2_+1.
4-36 Chapter 4: BIOS setup 4.7 Boot menu The Boot menu items allow you to change the system boot options. Select an item then press <Enter> to display the submenu. 4.7.1 Boot Device Priority 1st–xxth Boot Device [XXXXXXX] These items specify the boot device priority sequence from the available devices.
ASUS KCMA-D8 4-37 4.7.3 Boot Settings Conguration Quick Boot [Enabled] Enabling this item allows the BIOS to skip some power on self tests (POST) while booting to decrease the time needed to boot the system. When set to [Disabled], BIOS performs all the POST items.
4-38 Chapter 4: BIOS setup 4.7.4 Security The Security menu items allow you to change the system security settings. Select an item then press <Enter> to display the conguration options. Change Supervisor Password Select this item to set or change the supervisor password.
ASUS KCMA-D8 4-39 After you have set a supervisor password, the other items appear to allow you to change other security settings. User Access Level [Full Access] This item allows you to select the access restriction to the Setup items.
4-40 Chapter 4: BIOS setup 4.8 Tools menu The T ools menu items allow you to congure options for special functions. Select an item then press <Enter> to display the submenu.
ASUS KCMA-D8 4-41 4.9 Exit menu The Exit menu items allow you to load the optimal or failsafe default values for the BIOS items, and save or discard your changes to the BIOS items.
4-42 Chapter 4: BIOS setup.
5 RAID conguration This chapter provides instructions for setting up, creating, and conguring RAID sets using the available utilities..
ASUS KCMA-D8 Chapter summary 5 5.1 Setting up RAID ............................................................................ 5-3 5.2 FastBuild Utility .
ASUS KCMA-D8 5-3 5.1 Setting up RAID 5.1.1 RAID denitions RAID 0 (Data striping) optimizes two identical hard disk drives to read and write data in parallel, interleaved stacks.
5-4 Chapter 5: RAID conguration 5.1.2 Installing hard disk drives The motherboard supports Serial A T A for RAID set conguration. For optimal performance, install identical drives of the same model and capacity when creating a disk array . T o install the SA T A hard disks for RAID conguration: 1.
ASUS KCMA-D8 5-5 5.2 FastBuild Utility The FastBuild Utility allows you to create RAID 0, RAID 1, RAID 10 ,and RAID 5, SP AN and JBOD set(s) from Serial A T A hard disk drives that are connected to the Serial A T A connectors supported by the Promise RAID.
5-6 Chapter 5: RAID conguration 5.2.1 Creating a RAID set (RAID 0, RAID 1, RAID 10, RAID 5, SP AN or JBOD) T o create a RAID set: 1. From the main control panel, press <2> to to enter the LD View Menu . FastBuild (tm) Utility (c) 2004-2010 Promise Technology, Inc.
ASUS KCMA-D8 5-7 2. Press <Ctrl> + <C> to dene an LD and use <Spacebar> to select a desired RAID mode. FastBuild (tm) Utility (c) 2004-2010 Promise Technology, Inc.
5-8 Chapter 5: RAID conguration 5. After you have selected desired disks for the RAID set, press <Ctrl> + <Y> to start building the RAID set.
ASUS KCMA-D8 5-9 6. Press <Ctrl> + <Y> again and enter the LD name. Press <Enter> to continue. FastBuild (tm) Utility (c) 2004-2010 Promise Technology, Inc.
5-10 Chapter 5: RAID conguration FastBuild (tm) Utility (c) 2004-2010 Promise Technology, Inc. [ LD Dene Menu ] [ Keys Available ] [ ↑ ] Up [ ↓ ] Down [PaUp/PaDn] Switch Page [Space] Change .
ASUS KCMA-D8 5-1 1 10. The RAID set has been built successfully and press <Enter> to view the content. FastBuild (tm) Utility (c) 2004-2010 Promise Technology, Inc.
5-12 Chapter 5: RAID conguration 5.2.2 Deleting a RAID set T o delete a RAID set: 1. From the main control panel, press <3> to to enter the Delete LD Menu . Press 1..4 to Select Option [ESC]Exit FastBuild (tm) Utility (c) 2004-2010 Promise Technology, Inc.
ASUS KCMA-D8 5-13 FastBuild (tm) Utility (c) 2004-2010 Promise Technology, Inc. [ View LD Denition Menu] [ Drives Assignments ] LD No LD Name LD 1 RAID1 Stripe Block NA Read Policy NA RAID Mode Drv Capacity(GB) RAID 1 2 199.99 Write Policy WriteThru Port:ID Drive Model Capabilities Capacity(GB) 01:01 HDTXXXXXXXXXXXX SATA 3G 250.
5-14 Chapter 5: RAID conguration 5.2.3 Viewing the Drive Assignment T o view the drive assignment: 1. From the main control panel, press <1> to to enter the Drive Assignment Menu . Press 1..4 to Select Option [ESC]Exit FastBuild (tm) Utility (c) 2004-2010 Promise Technology, Inc.
ASUS KCMA-D8 5-15 5.2.4 Viewing the Controller Conguration T o view the controller conguration: 1. From the main control panel, press <4> to to enter the Controller Conguration Menu . Press 1..4 to Select Option [ESC]Exit FastBuild (tm) Utility (c) 2004-2010 Promise Technology, Inc.
5-16 Chapter 5: RAID conguration.
6 Chapter 6: Driver installation This chapter provides instructions for installing the necessary drivers for different system components..
ASUS KCMA-D8 Chapter summary 6 6.1 RAID driver installation ............................................................... 6-3 6.2 AMD ® processor driver installation .......................................... 6-15 6.3 LAN driver installation ......
ASUS KCMA-D8 6-3 6.1 RAID driver installation After creating the RAID sets for your server system, you are now ready to install an operating system to the independent hard disk drive or bootable array . This part provides instructions on how to install the RAID controller drivers during OS installation.
6-4 Chapter 6: Driver installation 7. Place a blank, high-density oppy disk to the oppy disk drive. 8. Press <Enter>. 9. Follow screen instructions to create the driver disk. 6. Use the arrow keys to select the type of RAID driver disk you want to create.
ASUS KCMA-D8 6-5 6.1.2 Installing the RAID controller driver Windows ® Server OS During Windows ® Server OS installation T o install the RAID controller driver when installing Windows ® Server OS: 1. Boot the computer using the Windows ® Server installation DVD.
6-6 Chapter 6: Driver installation 4. Insert the RAID driver disk you created earlier to the oppy disk drive, then press <Enter>. 5. Select the RAID controller driver you need from the list, then press <Enter>. 6. The Windows ® Setup loads the RAID controller drivers from the RAID driver disk.
ASUS KCMA-D8 6-7 T o verify the RAID controller driver installation: 1. Right-click the My Computer icon on the Windows ® desktop, and then select Properties from the menu.
6-8 Chapter 6: Driver installation Red Hat ® Enterprise Linux OS 4.7/4.8 T o install the RAID controller driver when installing Red Hat ® Enterprise OS: 1. Boot the system from the Red Hat ® OS installation CD. 2. At the boot: , type linux dd . 3. Press <Enter>.
ASUS KCMA-D8 6-9 7. Select Skip and press <Enter> to continue. CD Found To begin testing the CD media before installation press OK. Choose Skip to skip the media test and start the installation. OK Skip 8. Follow the onscreen instructions to nish installing the RedHat operating system.
6-10 Chapter 6: Driver installation Red Hat ® Enterprise Linux OS 5.0 T o install the RAID controller driver when installing Red Hat ® Enterprise OS: 1. Boot the system from the Red Hat ® OS installation CD. 2. At the boot: , type linux dd 3. Press <Enter>.
ASUS KCMA-D8 6-1 1 6. When asked if you will load additional RAID controller drivers, select No , then press <Enter>. 7. Follow the onscreen instructions to nish the OS installation.
6-12 Chapter 6: Driver installation SUSE Linux 1 1 OS T o install the RAID controller driver when installing SUSE Linux Enterprise Server OS: 1. Boot the system from the SUSE OS installation CD. 2. Use the arrow keys to select Installation from the Boot Options menu.
ASUS KCMA-D8 6-13 4. Insert the RAID driver disk to the oppy disk drive. T ype the command acpi=off apic=bigsmp brokenmodules=ahci in Boot Options eld, and press <Enter>.
6-14 Chapter 6: Driver installation 7. Select Back and follow the onscreen instructions to nish the installation. Please choose the Driver Update medium. OK sda: USB Floppy sr0: CD-ROM, ASUS DRW-1612BLT sdb: Disk, Promise 1X2 Morror/RAID1 sd3: Disk, Promise RAID Console other device 6.
ASUS KCMA-D8 6-15 6.2 AMD ® processor driver installation This section provides instructions on how to install the AMD ® processor driver on the system. Y ou need to manually install the AMD ® processor driver on a Windows XP / Server 2003 operating system.
6-16 Chapter 6: Driver installation 6.3 LAN driver installation This section provides the instructions on how to install Intel ® Gigabit LAN controller driver . T o install the Intel ® Gigabit LAN controller driver on a Windows ® OS: 1. Restart the computer , and then log on with Administrator privileges.
ASUS KCMA-D8 6-17 5. Click I accept the terms in the license agreement and then click Next to continue. 4. When the Intel ® Network Connections – InstallShield Wizard window appears, click Next to start the installation.
6-18 Chapter 6: Driver installation 6. Select the programs you want to install and click Next to continue. 7. Click Install to start the installation..
ASUS KCMA-D8 6-19 8. The programs you select are being installed. 9. Click Finish to nish the installation..
6-20 Chapter 6: Driver installation 6 . 4 A TI S M Bu s co n t ro ll er d ri ve r in st al la ti on This section provides instructions on how to install the A TI SM Bus driver on the system. Y ou need to manually install the A TI SMBus driver on a Windows ® XP / Server 2003 operating system.
ASUS KCMA-D8 6-21 6.5 Display driver installation This section provides instructions on how to install the ASPEED display driver . T o install the ASPEED display driver on a Windows ® OS: 1. Restart the computer , then log on with Administrator privileges.
6-22 Chapter 6: Driver installation 5. Click Install to start the installation. 4 . W he n th e AS PE ED I ns ta ll S h ie ld W iz ar d wi n do w ap pe ar s, c li ck N ex t t o co nt in ue .
ASUS KCMA-D8 6-23 6. The system installs the driver automatically . 7. When the installation completes, click Finish to exit the wizard..
6-24 Chapter 6: Driver installation 6.6 Management applications and utilities installation The support DVD that came with the motherboard package contains the drivers, management applications, and utilities that you can install to avail all motherboard features.
ASUS KCMA-D8 6-25 6.6.3 Utilities menu The Utilities menu displays the software applications and utilities that the motherboard supports. Click an item to install. 6.6.4 Make disk menu The Make disk menu contains items to create the AMD AHCI driver disk.
6-26 Chapter 6: Driver installation.
A Appendix: Reference information This appendix includes additional information that you may refer to when conguring the motherboard..
Appendix summary A ASUS KCMA-D8 A.1 KCMA-D8 block diagram ............................................................. A-3.
ASUS KCMA-D8 A-3 A.1 KCMA-D8 block diagram.
A-4 Appendix A: Reference information.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Asus KCMA-D8 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Asus KCMA-D8 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Asus KCMA-D8, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Asus KCMA-D8 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Asus KCMA-D8, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Asus KCMA-D8.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Asus KCMA-D8. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Asus KCMA-D8 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
