Manuel d'utilisation / d'entretien du produit Q300 du fabricant Optoma
Aller à la page of 26
User’s Guide Optoma MirrorBoard Q300 .
2 Index Chapter 1 3. Overview Chapter 2 4. Setting-Up the MirrorBoard 5. Install the Software Driv ers 6. Microsoft .NET Framework 2.0 “Wind ows XP only” 9. Wireless USB WinD rivers 10. USB Tablet Manager 11. Power Presenter RE 12. DisplayLink Graphics Adapter Software 13.
3 Chapter 1 Overview Compatible Operating Systems: Windows XP, Windows Vista or Windows 7 Battery Life: 2.5 hours of continuous use Resolution: WSVGA (1024 x 600) The Optoma MirrorBoard gives .
4 Chapter 2 Setting-Up the MirrorBoar d There are several tasks that you should perfo rm pr ior to your first use of the MirrorBoard: 1) Charge MirrorBo.
5 Install the Software Drivers 1. Insert the included MirrorBoard CD into your computer disk drive. If the menu does not automatically open, locate the CD-ROM drive on your PC and double click on “Autorun.exe.” 2. On the MirrorBoard CD Menu, choose the appropriate drivers for your operating system (Windows XP or Windows 7 / Vista).
6 Once you click on Next, the installation of several drivers will commence, one at a time. Windows may request a restart. Select cancel and do not restart the computer until all drivers are installed. Accept all the default values throughout the installations.
7 If Microsoft .NET Framework 2.0 is not installed on your computer, you will need to install it using the installation wizard. Click on Next and follow the directions:.
8 .
9 Wireless USB WinDrivers Installation will start automatically..
10 USB Tablet Manager Do not restart! If you mistakenly re start, run the installer again..
11 Power Presenter RE Optional installation: Power Presenter RE is a simple tool that lets you use the pen to markup or annotate any displayed document.
12 DisplayLink Graphic s Adapter Software.
13 After installation of all software, the MirrorBoard Se tup Wizard will request that you restart your PC. Click on Restart to comply. A gray icon will appear in the Windows syst em tray (lower right of the desktop). In Windows 7, you may have to click on the up arrow to show all icons.
14 Windows 7: Click the icon and choose “Advanced Configuration.” Set “Multiple displays” to “Duplicate these displays.” Click “Apply.” Please note that your computer display may adjust. The MirrorBoard automatically sets both the MirrorBoard and the computer display to a common resolution.
15 Calibrate the Pen The pen must be calibrated prior to first use. Click the Pen Pad icon and choose “Calibrati on”. Follow the instructions. Set other pen properties according to your preference. Your MirrorBoard is now ready for first use.
16 Chapter 3 Using MirrorBoard • General Use • Using the Pen • Power Prese nter RE • Touch Buttons • Using the MirrorBoar d with a Projector General Use On/Off Turn on the MirrorBoard by holding the green button on the top left end of the unit for one s econd and then releasing it.
17 Windows 7: Click the icon and choose “Advanced Configuration” or right click on the Desktop and select “Screen resolution”. Set “multiple displays” to “Duplicate these displays.” Click “Apply.” Please note that your computer display may adjust.
18 Power Presenter RE Power Presenter RE is a simple tool to use the pen to markup or annotate any document displayed. NOTE: Power Presenter RE only works when MirrorBoard is connected to the computer.
19 .
20 For additional information, refer to the Power Presenter RE Manual: Start>Program Files> Power Prese nter RE> Manual.
21 Touch Buttons MirrorBoard has seven touch buttons on the front panel . Activate these buttons with your fingers – Do not the pen. 1 2 3 4 5 6 7 1) ESC: Allows you to exit current function.
22 If MirrorBoard does not show the complete desktop, set the computer’s resolution to 800 by 600. (Right click on desktop, select Properties, Settings tab). Windows 7: Make sure that your MirrorBoard is powered on and connec ted wirelessly to the computer.
23 Next, click on Screen 2 (Projector), and in the Multiple Displays section, select "Duplicate Displays 2 and 3". Click Apply. Next, select the display that says 2|3. Check the "Make This My Main Display" box, and click Apply.
24 Chapter 4 Troubleshooting & FAQ’s MirrorBoard is showing the desktop backg round, but not the icons or Start Menu : MirrorBoard has to be set to “Mirror” mode to show the desktop. Select the DisplayLink icon in your system tray, and select “Mirror” from the list.
25 Appendix Optoma Global Offices For service or support pleas e contact your local office. USA 3178 Laurelview Ct. 888-289-6786 Fremont, CA 94538, USA 510-897-8601 www.optomausa.com serv ices@optoma.com Cana da 2420 Meadowpine Blvd., Suite #105 888-289-6786 Mississauga, ON, L5N 6S2, Canada 510-897-8601 www.
26 Precautions Do not use MirrorBoard near water or moisture. To reduce the risk of fire and/or electric shock, do not expose the product to rain or moisture. Clean only with dry cloth. Only use attachments/accessories specified by the manufacturer.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Optoma Q300 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Optoma Q300 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Optoma Q300, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Optoma Q300 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Optoma Q300, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Optoma Q300.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Optoma Q300. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Optoma Q300 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
