Manuel d'utilisation / d'entretien du produit TXSR307 du fabricant Onkyo
Aller à la page of 72
E n A V Receiv er TX-SR307 Instruction Manual Thank you for purchasing an Onkyo A V Receiv er. Please read this manual thoroughl y before making connections and plugg ing in the unit. Follo wing the inst ructions in this manual will enable you to obtain opti mum performance and listening enjoyment from your new A V Receiv er.
2 Impor tant Safety Instructions 1. Read these ins tructions. 2. Ke ep these instructi ons. 3. Heed all warnings. 4. Follo w all instructions. 5. Do not use this apparatus near w ater . 6. Clean only with dry cloth. 7. Do not block an y ventil ation openings.
3 Precautions 1. Recording Copyright —Unless it’ s for personal use only , recording copy righted material is illegal without the permission of the copyright holder . 2. A C Fuse —The A C fuse inside the unit is not user- serviceable. If you cannot turn on the unit, contact your Onkyo dealer .
4 Precautions —Continued F or British models Replacement and mounting of an A C plug on the po wer supply cord of this unit should be performed only by qualified service personnel.
5 Contents * T o reset the A V receiv er to its fa ctory defa ults, turn it on an d, while holdi ng dow n the [VCR/D VR] b utton, pres s the [ON/ ST ANDBY] button (see page 68). Introd uction Important Safety Instructions .............................
6 Features Amplifier • 65 W atts/Channel @ 8 ohms (FTC) • 100 W atts/Channel @ 6 ohms (IEC) • 120 W atts/Channel @ 6 ohms (JEIT A) • Optimum Ga in V olume Circuitry • H.C.P .S. (High Current Power Su pply) Massiv e High Power T ransformer Proces sing • Dolby Digital and Pro Logic II *1 • DTS and DTS Neo:6 5.
7 Fr ont & Rear P anels The actual front panel has v arious logos printe d on it. They are not shown here for clarity . The page numbers in parentheses show where you can find the main explanation for each item. a ON/ST ANDBY button (32) Set the A V receiver to On or Standby .
8 Front & Rear P a nels —Continued For detailed information, se e th e pages in parentheses. m DISPLA Y b utton (40, 44) Displays var ious informat ion about the currently selected input source.
9 Fr ont & Rear P anels —Continued a DIGIT AL IN CO AXIAL These coaxial digital audio inputs are for connecting components with a coaxial digital audio output, such as a CD player or D VD/BD player . They’ re assignable, wh ich means you can assign each one to an input selector to suit your setup.
10 Front & Rear P a nels —Continued n VCR/D VR IN/OUT A video component, such as a VCR or D VR, can be connected here for recording and playback. There is composite video input and output jacks for connecting the vide o signal, and there are analog audio input jacks for c onnecting the audio signal.
11 Remote Contr oller For detaile d information, se e the pages in parentheses. a ON/ST ANDBY button (32) Sets the A V receiv er to On or Standby . b REMO TE MODE/INPUT SELECT OR buttons (38, 64–66) Selects the remote contro ller modes and the input sources.
12 Remote Contr oller —Continued Notes: • If the remote controller doesn’t w ork reliably , try replacing the batteries. • Don’ t mix new and old batteries or dif ferent types of batteries. • If you intend not to use th e remote controller for a long time, remove the batteries to prevent damage from leakage or corrosion.
13 Enjo ying Home Theater Y ou can use tw o sets of speakers with the A V receiver: speaker set A and speak er set B . Speaker set A should be used in your main listenin g room for up to 5.1-channel playback. * While spea ker set B is on, s peaker set A is reduced to 2 .
14 Connecting the A V Receiver Speaker Configurat ion For the best surround-sound e xperience, you should connect fi ve speak ers and a powered subwoofer . The following table sho ws which channels y ou should use based on the number of speakers you hav e.
15 Connecting the A V Receiver —Continued Connecting the Spea ker Cables FRONT SPEAKERS A OT H E R S The following illustration sho ws which speaker s hould be connected to ea ch pair of terminals. 1 Strip about 5/8" (15 mm) of insulation fr om the ends of the speaker cables, and twist the bare wires tightly , as show n.
16 Connecting the A V Receiver —Continued This section explains ho w to connect the supplied indoor FM antenna and AM loop an tenna, and ho w to connect commercially av ailable ou tdoor FM and AM antennas. The A V receiv er won’t pick up any radio signals without any antenna connected, so you must co nnect the antenna to use the tuner .
17 Connecting the A V Receiver —Continued Connecting an Outdoor FM Antenna If you cannot achie ve good re ception with the supplied indoor FM antenna, try a commercially a vailable outdoor FM antenna instead. Notes: • Outdoor FM antennas w ork best outside, but usable results can someti mes be obtained when in stalled in an attic or l oft.
18 Connecting the A V Receiver —Continued • Before making any A V connections, read the manuals supplied with your other A V components. • Don’t connect the po wer cord until you’ ve completed and double-checked a ll A V connections.
19 Connecting the A V Receiver —Continued By connecting both the audio and video outputs of your D VD pl ayer and other A V components to the A V receiv er, you can switch the audio and vide o signals simultaneously simply b y changing the input source on the A V receiver.
20 Connecting the A V Receiver —Continued About HDMI Designed to meet the increased demands of digital TV , HDMI (High Definition Mu ltimedia Interface) is a new digital interface standard for connect ing TVs, projectors, D VD/BD players, set-top boxes, and other video components.
21 Connecting the A V Receiver —Continued If you ha ve an HDMI-compatible player , you can connect it to the A V receiv er with an HDMI cable. ■ Audio Signals • Audio and video signals receiv ed vi a inputs other than the HDMI IN ja cks are not output b y the HDMI OUT.
22 Connecting the A V Receiver —Continued • W ith connection , you can listen to and record audio from your TV . • T o enjoy Dolb y Digital and DTS, use connection or .
23 Connecting the A V Receiver —Continued • W ith connection , you can listen to and record audio from a D VD. • T o enjoy Dolb y Digital and DTS, use connection or .
24 Connecting the A V Receiver —Continued W ith this hookup, you can use the tuner in your VCR or D VR to listen to your fav orite TV programs via the A V recei ver, whic h is usef ul if your TV ha s no audio outputs. • T o enjoy Dolb y Digital and DTS, use connection or .
25 Connecting the A V Receiver —Continued Notes: • The A V recei ver must be turned on for recording. Recording is not possible while it’ s on Standb y .
26 Connecting the A V Receiver —Continued W ith this hookup, you can use your sa tellite or cable recei v er to listen to your fa vorite TV programs via the A V recei ver, whic h is usef ul if your TV ha s no audio outputs. • W ith connection , you can listen to a nd record audio from the video source.
27 Connecting the A V Receiver —Continued Note: When it is connected at the same tim e as A UX INPUT A UDIO L/R terminal, the input of POR T ABLE is giv en priority to and outputted.
28 Connecting the A V Receiver —Continued ■ CD Player or T urntable (MM) with Built-in Phono Preamp • W ith connection , you can listen to a nd record audio from the CD player .
29 Connecting the A V Receiver —Continued • W ith connection , you can play and record. • T o connect the recorder digitally for pla yback, use connections and , or and .
30 Connecting the A V Receiver —Continued ■ If Y our iP od Suppor ts Vide o: Connect your RI Dock’ s audio output jacks to the A V receiv er’ s CBL/SA T IN or VCR/DVR IN L/R jacks, and connect its video output jack to the A V receiv er’ s CBL/SA T IN or VCR/D VR IN V jack.
31 Connecting the A V Receiver —Continued Wi t h u (Remote Interactiv e), you can use the following special functions: ■ Auto P ower On/Standby When you start playback on a component connected via u , if the A V rece iv er is on Standby , it will automatical ly turn on and select that component as the input source.
32 T urning On the A V receiver ON/ST ANDBY ON/ST ANDBY RECEIVER ST ANDBY indicator T urning On and Standby On the A V receiver, press the [ON/ST ANDBY] button. On the remote controller , press th e [RECEIVER] button, follo wed by the [ON/ST ANDBY] button.
33 Fir st Time Setup This section explains the settings that you need to make before using the A V recei v er for the very f irst time. W ith the supplied calibrated microphone, Audyssey 2EQ au tomati.
34 First Time Setup —Continued Using A udyss ey 2EQ™ Notes: • Before star ting Audyssey 2EQ Room Correction and Speaker Setup, arrange th e room and con nect the speakers as you would for enjo ying movies. Changes to the room after auto setup requires you run the auto setup again, as room EQ characteristics may hav e changed.
35 First Time Setup —Continued Note: When the room c orrecti on and speake r setup is complete, “6. Equaliz er” (page 56) will be set to “ Audyssey .
36 First Time Setup —Continued If you connect to a COMPONENT VIDEO IN, you must assign it to an input select or . For example, if you connect your D VD/BD player to COMPONENT VIDEO IN 2, you should assign it to the D VD/BD input selector .
37 First Time Setup —Continued Notes: • Make sure you also set your dig ital sources to send out a digital signals. Pl ease refer to the digital sources’ manual. • This procedure can also be performed on the A V recei ver by using its [SET UP] button, arro w buttons, and [ENTER] b utton.
38 Basic Operations Basic A V receiver Operation 1 Use the A V receiv er’ s input select or b uttons to select an input sour ce. T o select an input sour ce with the remote contr oller . Press the [RECEIVER] button, and then press its INPUT SELECT OR buttons.
39 Basic Operations —Continued This section explains functions that can be used with an y input source. Y ou can adjust the brightness of the display . Y ou can tempor arily mute the output of the A V receiv er. T o unmute the A V recei ver, press the r emote controller’ s [MUTING] b utton again, or ad just the volume.
40 Basic Oper ations —Continued 7 For pri v ate listeni ng, you can connect a pair of stereo headphones (1/4-inch phone plug) to the A V receiv er’ s PHONES jack. Notes: • Always turn d own the v olume before connecting your headphones. • While the headphones plug is inserted in the PHONES jack, the speakers are turned off.
41 Basic Operations —Continued The Music Optimizer function enhances the sound quality of compressed music f iles. Use it with music f iles that use “lossy” compression, su ch as MP3. Note: The Music Optimizer function only works with PCM digital audio input signals with a sampling rate below 48 kHz and analog audio input signals.
42 Listening to the Radio For AM/FM tuning to work properly , you must specify the AM/FM frequenc y step used in your area. Note that when this setting is cha nged, all radi o presets are deleted. Note: This procedure can also be perform ed on the A V recei ver by using its [SETUP] b utton, arro w buttons, and [ENTER] button.
43 Listening to the Radio —Continued W ith the built-in tu ner , you can enjoy AM and FM radio stations and st ore your f av orite stations as presets for easy selection. T uning into AM/FM Radio Stations ■ A uto T uning Mode When tuned into a station, the TUNED indicator appears.
44 Listening to the Radio —Continued ■ T uning i nto Stat ions by Frequen cy Y ou can tune into AM and FM stations directly by entering the appropriate frequency . Displa ying AM/FM Radio Information 1 Press the [AM] or [FM] b utton to select “AM” or “FM”, follo wed by the [D .
45 Listening to the Radio —Continued Y ou can store a combination of up to 40 of your fa vorite AM and FM radio stations. Deleting Presets Selecting Presets Presetting AM/FM Stations 1 T une into the AM or F M station you want to store as a preset. 2 Press the [MEMOR Y] button.
46 Listening to the Radio —Continued RDS only works in areas where RDS broadcasts are av ailable. When tun ed to an RDS station, the RDS indicator appears. ■ What is RDS? RDS stands for Radio Data System and is a method of transmitting data in FM radi o signals.
47 Listening to the Radio —Continued Displa ying Radio T ext (RT) When tuned to an RDS stati on that’s broadcasting text information, the text can be displayed. Notes: • The message “W aiting” ma y appear while the A V recei ver waits for the R T information.
48 Recor ding This section explains ho w to record the input source and how to r ecord audio and vi deo from separate sources. Notes: • The surround sound and DSP listening modes cannot be recorded. • Copy-protected D VDs cannot be recorded. • Sources connected to a digital input cannot be recorded.
49 Using the Listening Modes For a description of each lis tening mode, see “ About the Listening Modes” on page 53. Selecting on th e A V receiver ■ [MO VIE/TV] b utton This butt on selects the listening modes intended for use with movies and TV .
50 Using the Listening Modes —Continued Mono/Multiplex Sour ces ✔ : A vailable Listening Modes Listening Modes A vailable f or Each Source Format The Speaker lay out illu stration shows which speakers ar e set to active in the “Sp Config” setting (see p age 54).
51 Using the Listening Modes —Continued Stereo Sour ce ✔ : A vail able Li stening Modes Listening Mode Button Speaker lay out Direct ✔✔✔ Stereo ✔✔✔ Mono ✔✔✔ PLII Movie ✔✔ PLI.
52 Using the Listening Modes —Continued Multich annel Sour ces ✔ : A vailable Listening Modes Listening Mode Button Speaker lay out Direct ✔✔✔ Stereo ✔✔✔ Mono ✔✔✔ Dolby Digital/ .
53 Using the Listening Modes —Continued The A V receiv er’ s listeni ng modes can transform your listening room into a m ovie theater or concert hall, with high fidelity and stunning surround sound. Direct In this mode, audio from the input source is output directly with minimal pr ocessing, pro viding high- fidelity reproduction.
54 Adv a nced Setup Note: This procedure can also be perform ed on the A V recei ver by using its [SETUP] b utton, arro w buttons, and [ENTER] button. This section explains ho w to check the speaker s.
55 Adv anced Setup —Continued Crosso ver (Crossov er Frequency) This setting is set automati cally by the Audysse y 2EQ™ Room Correction and Speak er Setup function (see page 33). This setting only applies to the sp eak ers that you specif ied as “ Small ” in the “3.
56 Adv anced Setup —Continued 5. Level Cal (Speaker Le vels Calibration) These settings are se t automatically b y the Audysse y 2EQ™ Room Correction a nd Speaker Setup function (see page 33). Y ou can set the volume le v el of each speak er so that all sp eakers can be heard equ ally at the listening position.
57 Adv anced Setup —Continued W ith the Audio Adjust functions and settings, you can adjust the sound and listening modes as you like. A udio Adjust Settings 7. Audio Adjust Multiplex/M ono Settings Input (Mux) Main: The main channel is output ( default).
58 Adv anced Setup —Continued A udysse y Settings After room correction and speaker setup is completed, Audysse y Dyna mic EQ™ beco mes “On” by defa ult. Dyn amic EQ Off: Au dyssey Dynamic EQ of f. On: Audyssey Dy namic EQ on (default). W ith Audyssey Dynamic EQ, you can enjoy great sound ev en when listening at low v olume levels.
59 Adv anced Setup —Continued This section e xplains items on the Hardware menu. Hard ware Setup 8. Hardware Remote ID When se veral Onk yo components are used in the same room , their r emote ID codes ma y o verlap. T o differentiate the A V receiv er from the other components, you can chan ge its remote ID from 1, the default, to 2 or 3.
60 Adv anced Setup —Continued Y ou can change various audio setting s by pressing the [A UDIO] b utton. Using the A udio Settings RECEIVER AU D I O qwer 1 Press the [RECEIVER] button f ollowed b y the [A UDIO] button. 2 Use the Up and Down [ q ]/[ w ] b uttons to select an ite m.
61 Adv anced Setup —Continued Au dyssey Dynamic V olume™ Dyn V ol See “Dyn V ol” of “ Audio Adjust Settings” on page 58. Music Optimi zer The Music Optimizer function en hances the sound quality of compressed music f iles. Use it with music files that use “lossy” compression, such as MP3.
62 Contr olling Other Components Y ou can control your D VD player , CD player , and other components with the A V rece iver’ s remote controller . T o control another component , you must fi rst enter that component’ s remote control code to a REMO TE MODE button.
63 Contr olling Other Components —Continued Remote Contr ol Codes for Onky o Components Conn ected via u Onkyo components that are connected via u are controlled by pointing the remote controller at the A V receiv er, not the component. This allows you to control components that are out of vie w , in a rack, for e xample.
64 Controlling Other Components —Continued The [D VD/BD] button is preprogrammed with the remote control code for controlling an Onkyo D VD player . For details on entering a remote control code for a different componen t, see page 62. a ON/ST ANDBY button Sets the D VD player to On or Standb y .
65 Contr olling Other Components —Continued The [CD] button is preprogrammed with the remote control code for controlli ng an Onkyo CD player . For details on entering a re mote control co de for a differ ent component, see page 62. a ON/ST ANDBY button Set the component to On or Standby .
66 Controlling Other Components —Continued By pressing the REMO TE MODE button that’ s been programmed with the remote contr ol code for your RI Dock, you can control your iPod in the RI Dock with the follow ing buttons. The [DOCK] bu tton is preprogrammed with the remote control code for controlling an RI Dock when used with an u connection.
67 Contr olling Other Components —Continued r PLA Y MODE b utton Selects play modes on components with selectable play modes. W orks as a Resume button when used with a DS-A2 RI Dock. s RANDOM button* Used with the shuffle function. * Buttons ma rked with an ast erisk ( * ) are not supp orted by 3r d generation i Pod models.
68 T roub leshooting If you hav e any trouble using the A V recei ver, look for a solution in this section. If you can’ t resolve the issue yourself, contact your Onkyo dealer . Can’t turn on the A V rec eiver • Make sure that the power cord is plugged into the w all outlet properly .
69 T r oubleshooting —Continued The subwoofer produces no sound • The subwoofer outputs no sound while only speaker set B is on. T urn on speaker set A. • If the source material c ontains no audio in the LFE channel, the subw oofer produces no sound.
70 T r oubleshooting —Continued • Make sure that the A V receiver is not subjected to direct sunshine or in vert er -type fluorescent lights. Relocate if necessary . • If the A V receiver is installed i n a rack or cabinet with colored-glass doors , the remote controller may not work reliably when the doors are closed.
71 Specifications Amplifier Sect ion Video Section T uner Sectio n General ■ Video Inputs ■ Video Outputs ■ A udio Inputs ■ A udio Outputs ■ Control T ermi nal Specifications and features ar e subject to change without notice.
72 SN 29344921A Y0903-2 (C) Copyright 2009 ONKY O CORPORA TION Japan. All rights reserved. http://www.onkyo.com/ HOMEPAGE Sales & Product Planning Div . : 2-1, Nisshin-cho , Ney agawa-shi, OSAKA 572-8540, J AP AN T el: 072-831-8023 F ax: 072-831-8163 ONKY O U .
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Onkyo TXSR307 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Onkyo TXSR307 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Onkyo TXSR307, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Onkyo TXSR307 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Onkyo TXSR307, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Onkyo TXSR307.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Onkyo TXSR307. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Onkyo TXSR307 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
