Manuel d'utilisation / d'entretien du produit HT-S6505 du fabricant Onkyo
Aller à la page of 132
E n AV RECEIVER HT-R758 Instruction Manual Contents Safety Information and Introduction ............ 2 Table of Contents ............. .............. ........... ..... 6 Connections ....... ........... .............. .............. ... 12 Turning On & Basic Operati ons .
En-2 Safety Information and Introduction Important Safety Instructions 1. Read these instruct ions. 2. Keep these instructi ons. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this a pparatus near water. 6. Clean only with dry cloth. 7.
Safety Information and Introduction En-3 Precautions 1. Recording Copyright —Unless it’s for personal use only, recording copyrighted ma terial is illegal without the permission of the copyright holder. 2. AC Fuse —The AC fuse inside the unit is not user- serviceable.
Safety Information and Introduction En-4 For Canadian Models NOTE: THIS CLASS B DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-003. For models having a power co rd with a polarized plug: CAUTION: TO PREVENT EL ECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
Safety Information and Introduction En-5 Supplied Accessories Make sure you have the following accessories: * In catalogs and on p ackaging, the letter at the end of the product name indicates the color. Specifi cations and opera tions are the same regardless of color.
Safety Information and Introduction En-6 Table of Contents Safety Information and Intro duction Important Safety Instructions ......................................2 Precautions ................................................................... 3 Supplied Accessories.
Safety Information and Introduction En-7 Features Amplifier • 80 Watts/Channel @ 8 ohms (FTC) • 130 Watts/Channel @ 6 ohms (IEC) • 160 Watts/Channel @ 6 ohms (JEITA) • Optimum Gain Volume Circ uitry • H.C.P.S. (High Current Po wer Supply) Massive High Power Transformer Processing • HDMI (Audio Return Channel, 3D, DeepColor, x.
Safety Information and Introduction En-8 Front & Rear Panels For detailed informat ion, se e the pages in parentheses. a 8 ON/STANDBY button ( 19 ) b ZONE 2 , OFF buttons ( 55 ) c Remote control s.
Safety Information and Introduction En-9 s For detailed informat ion, se e the pages in parentheses. a Z2 (Zone 2) indicator ( 55 ) b 3D indicator This lights when a 3 D input si gnal is detected .
Safety Information and Introduction En-10 a DIGITAL IN COAX IAL and OPTICAL jacks b COMPONENT VIDEO IN and OUT jacks c ETHERNET port d FM ANTENNA jack and AM ANTENNA terminal e HDMI I N and OUT jacks .
Safety Information and Introduction En-11 Remote Controller For detailed informat ion, se e the pages in parentheses. a 8 RECEIVER button ( 19 ) b REMOTE MODE/INPUT SELECTOR but tons ( 20 ) c q / w / .
En-12 Connections Connecting the AV Receiver Connecting the Speaker Ca bles The following illustration sh ows how to connect the speakers to each pair of terminals. ■ Scre w-type speaker terminals Strip 1/2" to 5/8" (12 to 15 mm) of insulation from the ends of the speaker cables, and twist the bar e wires tightly, as shown.
Connections En-13 Speaker Connecti on Precautions Read the following before connecting your speakers: • You can connect speakers with an impedance of between 6 and 16 ohms. If you use speakers with a lowe r impedance, and use the amplif ier at high volume levels for a long period of time, the built-in am p protection circuit may be activated.
Connections En-14 Connecting AV components a • Before making any AV connections, read the manuals supplied with your AV components. • Don’t connect the power cord until you’ve completed and double-checked all AV connections. • Push plugs in all the way to make good connections (l oose connections can cause noise or malfunctions).
Connections En-15 * If your TV doesn’t suppo rt Audi o Return Channe l (ARC), you need to connect an optical digita l cable toge ther with the HDMI cable to the AV receiver.
Connections En-16 Connect your components to th e appropriate jacks. The default input assignments are shown below. See “Connection Tips and Vide o Signal Path” for more information ( ➔ page 71 ). ✔ : Assignment can be changed ( ➔ page 45 ).
Connections En-17 With u (Remote Interactive), you can use the following special functions: ■ System On/Auto Power On When you start playback on a component connected via u , while the AV receiver is on standby, the AV receiver will automa tically turn on and select that component as the input source.
Connections En-18 This section explains how to connect the s upplied indoor FM antenna and AM loop antenna. The AV receiver won’t pick up any radio signals without any antenna connected, so you must c onnect the antenna to use the tuner.
En-19 Turning On & Basic Operations Turning On/Off the AV Receiver Tip •T h e HYBRID STANDBY indicator may light depending on the status of settings ( ➔ pa ge 44 ). • For details on power management settings, see “Auto Standby” ( ➔ page 5 1 ).
Turning On & Basic Operations En-20 Playback ■ Op erating with the remote controller ■ Op erating on the AV rec eiver The on-screen menus app ear only on a TV that is connected to HDMI OUT . If your TV is connected to other video outputs, use th e AV receiver’s displa y when changing settings.
Turning On & Basic Operations En-21 Tip • See “Controlling Other Components” about the operation of other components ( ➔ pag e 58 ). Note • The buttons you can use will diff er depending on the devices and media used for playback. Controlling Contents of USB or Network Devices d k j m b a c f g l n o q h i p e Press USB or NET first.
Turning On & Basic Operations En-22 This section describes ic ons that appear on the AV receiver’s display during media playback. This section explains how to play music file s on the iPod/iPhone.
Turning On & Basic Operations En-23 This section explains how to play music files from a USB device (e.g., USB flash drives and MP3 players). See also: • “Network/USB Features” ( ➔ page 75 ) Note • While the message “ Connecting.
Turning On & Basic Operations En-24 Internet radio URLs in the following forma ts are supported: PLS, M3U, a nd podcast (RSS). However, depending on the type of data or audio format used by the Internet radio station, you may no t be able to listen to some stations.
Turning On & Basic Operations En-25 This section explains how to play music files on a computer or media server th rough the AV receiver (Server Playback). Windows Media Playe r 11 Setup This section explains how to configure Windows Media Player 11 so th at the AV receiver c an play the music files stored on your computer.
Turning On & Basic Operations En-26 Remote Playback means you can play the music files stored on a media server or personal computer with the AV receiver by operating the controller device in the home network.
Turning On & Basic Operations En-27 Using the Tuner With the built-in tuner you can enjoy AM and FM radio stations. You can store your favor ite stations as presets for quick selection.
Turning On & Basic Operations En-28 Presetting AM/FM Stati ons You can store a combination of up to 40 of your favorite AM/FM radio stati ons as presets. ■ Selecting Prese ts ■ Deleting Pr esets Using RDS (excluding North American models) When tuned into an RDS station, the RDS indicator lights.
Turning On & Basic Operations En-29 Note • In some cases, the text characters displayed on the AV rec eiver may not be identical to those b roadcast by the radio station. Also, unexpected characters may be displaye d when unsupported characters are received.
Turning On & Basic Operations En-30 Using Basic Functions With the supplied calibra ted microphone, Audyssey 2EQ ® automatically det ermines the number of speakers connected, their si ze for purposes of bass management, optimum crossover frequencie s to the subwoofer (if present), and distances from the primary listening position.
Turning On & Basic Operations En-31 1 Turn on the AV receiver and the connected TV. On the TV, select the input to which the AV r eceiver is connected. Note • Before pluggin g the Speaker setup micr ophone to perform Automatic Speaker Setup, pleas e make sure that all your connected speakers and subwoo fers produce sound .
Turning On & Basic Operations En-32 Note • You can cancel Audyssey 2EQ Room Corr ection and Speaker Setup at any point in this procedure simply by d isconnecting the setup microphone. • Do not connect or discon nect an y speakers du ring Audyssey 2EQ Room Correction a nd Speaker Setup.
Turning On & Basic Operations En-33 Selecting Listening Modes See “About Listening Modes” for deta iled information about the li st ening modes ( ➔ page 34 ). ■ Listening Mode Buttons MOVIE/TV button This button selects the liste ning modes intended for use with movies and TV.
Turning On & Basic Operations En-34 About Listenin g Modes The AV receiver’s listening modes can transform your listening room into a movie th eater or concert hall, with high fidelity and stunning surround sound.
Turning On & Basic Operations En-35 ■ Onky o-Original DSP Listening Modes Listeni ng Mode Description Input Source Speaker Layout Orchestra Suitable for classical or operatic music, this mode emphasizes the sur round channels in order to widen the stereo image, and simulates the natural reverberation of a large hall.
Turning On & Basic Operations En-36 ■ Li stening Modes Listeni ng Mode Description Input Source Speaker Layout Pure Au dio *1*2 In this mode, the display and video circuitr y are turned off, minim izing possible noise sources for the ulti mate in high-fidelity audio reproductio n.
Turning On & Basic Operations En-37 Note *1 (North American models) This listening mode is not available. *2 Pure Audio cannot be selected when Zone 2 is active. Besides, if you activate Zone 2 wh ile Pure Audio is selected, the listening mode will automatically switch to Direct.
Turning On & Basic Operations En-38 The Home menu provides quick access to frequently used menus. ■ Networ k Service ` With this selection, you ca n use various Internet radio services or play the contents stored in media connected to your home network (DLNA) ( ➔ pages 23 to 26 ) .
Turning On & Basic Operations En-39 With the sleep timer, you can set the AV receiver to turn off automatically aft er a specified period. You can adjust the brightness of the AV receiver’s displa y. You can display various in formation about the current input source as follows.
Turning On & Basic Operations En-40 When you connect an u -capable Onkyo component, you must configure the input display so that u can wo rk properly. This setting can be done only from the front panel. The Music Optimizer function enhances the sound quality of compressed music files.
En-41 Advanced Operations On-screen Setup With the AV receiver connected to a TV, there are two ways of changing the settings on-screen: using the Quick Setup or the Setup Menu ( HOME ). ■ Quick Setup The Quick Setup provides quick access to frequently used settings.
Advanced Operations En-42 You can change various audi o settings from the Quick Setup ( ➔ page 41 ). Note • These settings are not available in either of the following cases: –T h e “ Audio TV Out ” setting is set to “ On ” ( ➔ page 52 ).
Advanced Operations En-43 Music Opti mizer ■ Music Optimizer ` Off ` On The Music Optimizer function enhances the sound quality of compressed music files. When se t to “ On ”, the M.Opt indicator lights on the AV re ceiver’s display, and the MUSIC OPTIMIZER indicator (North American models) lights on the front panel.
Advanced Operations En-44 By way of optimized circuitry, this fu nction reduces power consumption when the AV rece iver is in standby mode. The HYBRID STANDBY indicator will light in either of the following conditions: –“ HDMI Th rough ” is enabled and Zones are turned off (the HDMI indicator is off).
Advanced Operations En-45 Menu HDMI Input If you connect a video compone nt to an HDMI input, you must assign that input to an i nput selector. For example, if you connect your Blu-ray Disc/DVD player to HDMI IN 2 , you must assign “ HDMI2 ” to the “ BD/DVD ” input selector.
Advanced Operations En-46 Menu Digital Audio If you connect a component to a digital audio input, you must assign that input to an i nput selector. For example, if you connect your CD player to the OPTICAL IN 1 , you must assign “ OPTICAL1 ” to the “ TV/CD ” input selector.
Advanced Operations En-47 Note • For a more accurate setting, look up the frequency re sponse in the manuals supplied with your speakers and set acco rdingly.
Advanced Operations En-48 Menu Audio Adjust With the Audio Adjust func tions and sett ings, you can adjust the sound and list ening modes as you like. Multiplex/Mono ■ Multiplex Input Ch (Mux) ` Main ` Sub ` Main /Sub This setting determines which channel of a stereo multiplex source is output.
Advanced Operations En-49 Items can be set i ndividually for each input selector. Menu Source Setup Audyssey ® ■ Audys sey ` Off ` Movie : Select this setting for movie ma terial. The Audyssey indicator will light. ` Music : Select this setting for music materi al.
Advanced Operations En-50 A/V Sync ■ A/V Sync ` 0m s e c to 400 msec in 10 msec steps. When using progressive scanning on your Blu-ray Disc/DVD player, you may find that the picture and sound are out of sync. With this se tting, you can correct this by delaying the audio signals.
Advanced Operations En-51 Setting the Incoming Digital Sign al (Fixed Mode) ■ Fi xed Mode ` Off : The format is detected au tomatically. If no digita l input signal is present, the corresponding analog input is used instead. ` PCM : Only 2-channel PCM format input signals will be heard.
Advanced Operations En-52 Menu HDMI Setup ■ HDMI Ctr l (RIHD) ` Off ` On Turn this setting on to allow p -compatible components connected via HDM I to be controlled by the AV receiver ( ➔ page 72 ).
Advanced Operations En-53 ■ Audio Return Ch (ARC) ` Off ` Auto : The audio signal from your TV tuner can be sent to HDMI OUT of the AV receiver . The audio return channel (ARC) f unction allows an ARC capable TV to send th e audio stream to HDMI OUT of the AV receiver.
Advanced Operations En-54 ■ DHCP ` Enable ` Disable This setting determines whet her or not the AV receiver uses DHCP to automatical ly configure its IP Address, Subnet Mask, Gateway, a nd DNS Server settings.
Advanced Operations En-55 Zone 2 In addition to the main liste ning room, you can also enjoy playback in another room, or as we call Zone 2. And, you can select a diffe rent source for each room. Connecting the Zone Speaker s to an Additional Amplifier This setup allows 5.
En-56 Controlling Other Components iPod/iPhone Playback via Onkyo Dock RI Dock With the RI Dock, you can easily play the music of your iPod/iPhone, or watch the slid eshows and videos of your iPod/iPhone on a TV.
Controlling Other Components En-57 By pressing the REMOTE MODE button that’s been programmed with the remote control code for your Dock, you can control your iPod/iPhone in the Dock with the buttons described further in this section. See “Entering Remote Control Codes” for details on entering a remote control code ( ➔ page 58 ).
Controlling Other Components En-58 Controlling Other Components You can use the AV receiver’s remot e controller to cont rol your other AV components. This section explains how to enter the remote control code for a component that you want to control : DVD, TV, CD, etc.
Controlling Other Components En-59 Onkyo components that are connected via u are controlled by pointing the re mote controller at the AV receiver, not the component.
Controlling Other Components En-60 Controlling a Blu-ray Disc/DVD Player, HD DVD Player or DVD Recorder BD/DVD is preprogrammed with the remote control code for controlling a compone nt that supports the p *1 (limited to some models). The component must be able to receive remote control commands via p and be connected to the AV rec eiver via HDMI.
Controlling Other Components En-61 ■ DVD playe r / DVD recorder operation ■ VCR/PVR operation ■ Cas sette tape deck operation ■ Satellite receiver / Cable receiver operation ■ CD pla yer / CD recorder / MD recor der operation Note • With some components, certain buttons may not work as expected, and some may not work at all.
En-62 Appendix Troubleshooting If you have any trouble using th e AV receiver, look for a solution in this section. If you can’t resolve the issue yourself, contact your Onkyo dealer.
Appendix En-63 ■ Only the front spe akers produce sound ■ Only the ce nter sp eaker produces sound ■ The surround speak ers produce no soun d ■ The ce nter speaker produces no sound ■ Th e subwoofer produc es no sound ■ Ther e’s no sound with a certain signal format ■ Can’t select the Pure Audio listening mode ■ Can’t get 5.
Appendix En-64 ■ There’s no picture ■ There’s no picture from a source connected to an HDMI IN ■ The on-scr een me nus don’t appear ■ Rec eption is noisy, FM st ereo reception is noisy, .
Appendix En-65 ■ Ther e’s no video ■ The AV rece iver’s remote controller doesn’t control my iPod/iPhone ■ The AV rece iver unexpectedly selects my iPod/iPhone as the input source ■ i Po.
Appendix En-66 ■ How do I change the language of a multi plex source ■ Th e u functions don’t work ■ The functions System On/Auto Power On and Direct Change don’t work for components connected via u ■ When performing “Autom atic Speaker Setup”, the measurement fails a nd the message “Ambient noise is too high.
Appendix En-67 Firmware Update To update the firmware of the AV receiver, you can choose from the following two methods: update via network, or update via USB storage. Choose the one that best suits your environment. Before pr oceeding with the update, please read the correspondi ng explanations carefully.
Appendix En-68 Update Procedure Troubleshooting Case 1: If an error occurs, “ Error!! *-** ” is displayed on the AV receiver’s display. (Alpha-num eric characters on the front display are denoted by asterisk s.) Refer to the following table and take a ppropriate action.
Appendix En-69 The AV receiver allows you to update the firmware using a USB device. Note • Never unplug or turn of f the AV receiver during the update process.
Appendix En-70 Troubleshooting Case 1: If an error occurs, “ Error!! *-** ” is displayed on the AV receiver’s display. (Alpha-numeric ch aracters on the front display are denoted by asterisk s.) Refer to the following table and take appropriate action.
Appendix En-71 Connection Tips and Video Signal Path The AV receiver supports seve ral connection formats for compatibility with a wi de ra nge of AV equipment. The format you choose will depe nd on the formats supported by your components. Use the foll owing sections as a guide.
Appendix En-72 Using an RIHD- compatible TV, Player, or Recorder p , which stands for Re mote Interactiv e over HDMI, is the name of the system control function found on Onkyo components. The AV rece iver can be used with CEC (Consumer Elec tronics Control), which allows system control over HDMI and is part of the HDMI standard.
Appendix En-73 ■ How to connect and setup 1 Confirm the connection and s ettings. 1. Connect the HDMI OUT jack to the HDMI input jack of the T V. 2. Connect the audio output from the TV to the OPTICAL IN 2 jack of the AV receiver using an optical digital cable.
Appendix En-74 About HDMI Designed to meet the increa sed demands of di gital TV, HDMI (High Definition Multimedia Interfac e) is a new digital interface standard fo r co nnecting TVs, projectors, Blu-ray Disc/DVD players, se t-top boxes, and other video components.
Appendix En-75 Network/USB Features The following diagram shows how you can connect the AV receiver to your home network. In this example, it’s connected to a LAN port on a router, which has a 4-port 100Base-TX switch built-in. ■ Ether net Network For the best results, a 100B ase-TX switched Ethernet network is recommended.
Appendix En-76 ■ Serv er playback The AV receiver ca n play digital music files stored on a computer or media server and supports the following technologies: • Windows Media Player 11 • Windows Media Player 12 • Windows Media Connect 2.
Appendix En-77 For server playback and pla yback from a USB device, the AV receiver supports the fo llowing music file formats. Variable bit-rate (VBR) file s are supported. However, playback times may not display correctly. Note • With remote playback, the AV receiver does not support the following music file formats: FLAC and Ogg Vorbis.
Appendix En-78 License and Trademark Information “x.v.Color” is a trademark of Sony Corporation. Manufactured under license und er U.S. Patent Nos: 5,956,674; 5,974,380; 6, 226,616; 6,487 ,535; 7,212, 872; 7,333,929 ; 7,392,195; 7,272,567 & other U.
Appendix En-79 Specifications Amplifie r Section Video Section Tuner Section General ■ HDMI ■ Video Inputs ■ Video Outputs ■ Aud io Inputs ■ Audio Outputs ■ Oth ers Specifications and featu res are subject to change without notice.
2-1, Nisshin-cho , Ney aga wa-shi, OSAKA 572-8540, J AP AN T el: 072-831-8023 F ax: 072-831-8163 http://www .onkyo .com/ 18 P ark W a y , Upper Saddle River , N.J . 07458, U.S .A. T el: 800-229-1687, 201-785-2600 F ax: 201-785-2650 http://www .us.onkyo .
En-1 E n 5.1ch Home Cinema Package Make sure you have the following accessories. Front speakers (S KF-558) *1 Configuration of the rubber st oppers may be different from the figure, such as being 2 sheets in stead of 1 sheet, but the total number will be same.
En-2 Using the Rubber Stoppers for a More Stable Platform We recommend using the s upplied rubber stoppers to achieve the best possible sound from your speakers.
En-3 The Home Cinema means that you can enjoy surround sound with a real sense of movement in your own home — just like being in a movi e theater or conce rt hall. ab Front left and right speakers (SKF-558) They should be positione d facing the listener at about ear leve l, and equally spac ed from the TV.
En-4 ■ Powered Subwoofer (SKW-658) ■ Front Speakers (SKF-558) ■ Center Spe aker (SKC-391C) ■ Sur round Speaker s (SKR-558) Specifications and ap pearance are subjec t to change without prior notice. Note For non-magne tic shielded speakers: Try moving the speakers away from your TV or monitor.
De-1 D e 5.1 Kanal Heimkinopaket Überprüfen Sie, ob Sie folg ende Zubehörteile bekommen haben. Front-Lautsprec her (SKF-558) *1 Es kann sein, dass d ie Konfiguration der Gum mistopper anders ist als die auf der Abbildung. E s können zum Beispiel 2 La gen sein anstatt nur 1, aber die Anzahl wird die gleic he sein.
De-2 Verwendung der Gummisto pper für eine stabilere Plat tform Wir empfehlen Ihnen die mitge lieferten Gummistopper zu verwenden, um den bestmögl ichen Klang mit Ihren Boxen zu erzielen. Di e Gummistoppe r verhindern, dass die Boxen sich bewegen und bieten ei ne stabilere Plattform.
De-3 Mit dem Heimkino können Sie Surround-Klang mit einer echten Bewegungswahrnehmung bei Ihnen zu Hause genießen – als ob Sie sich in einem Kino oder Konzertsaal befinden.
■ Anges chalteter Subwoofer (SKW-658) ■ Front-Lau tsprecher (SKF-558 ) ■ Center-Lautsprecher (SKC-391C) ■ Surround-Lautsprecher (SKR-558) Technische Daten und Ausseh en können ohne vorherige Ankündigung geändert werden.
Using Internet Radio En-1 Using Internet Radio Note • Available services may vary depending on the region. Common Procedures in Internet Radio Menu 1 Press NET . A list of the network serv ices appears, and the NET indicator lights. If it flashe s, verify that the Ethernet cable is firmly connected to the AV receiver.
Using Internet Radio En-2 Pandora is a free, personalized Internet radio service that plays the music you know and helps you discover music you’ll love. PANDORA, the PANDORA logo, and the Pandora trade dress are trademarks or regi stered trademarks of Pandora Media, Inc.
Using Internet Radio En-3 Using Rhapsody (U.S. only) 1 Use q / w to select “Sign in to your account” and then press ENTER . To use Rhapsody, you need an acco unt. If you don’t have one yet, you can create a new account at www.rhapsody.com/onkyo If you have an existing Rhapsody account, select “ Sign in to your account ” and press ENTER .
Using Internet Radio En-4 Your Onkyo AV receiver includes a free trial of SiriusXM Internet Radio. The “Account Info” screen shows how many days are left in your trial. After the trial period expires, if you want to conti nue listening to the service, you must subscribe.
Using Internet Radio En-5 Last.fm is a music s ervice th at learns what you love... Your new Onkyo AV receiver is very clever. If you have a free Last.
Using Internet Radio En-6 Using Slacker Personal Radio 1 If you do not have an ac count, create one on the Slacker website (www.sl acker.com) with your computer. If you already have a Slac ker account, se lect “Sign in to your account” and then press ENTER .
Using Internet Radio En-7 Listen to your music collection on your home stereo in complete digital fide lity wit hout a p ersonal computer plus safely backup all your songs.
Utilisation d’une webradio Fr-1 Utilisation d’une webradio Remarque • Les services dispon ibles peuvent varier en fonction de la région. Procédures courantes dans le menu de webradio 1 Appuyez sur NET . Une liste des services réseau s’affiche, et le témoin NET s’allume.
Utilisation d’une webradio Fr-2 Pandora est un service de radio en ligne libre et personnalisé vous permettant de lire la musique que vous connaissez et de découvrir celle que vous aimez. PANDORA, le logo PANDOR A, et l’habillage commercial Pandora sont des marques commerciales ou des marques dépo sées de la société Pandora Media, Inc.
Utilisation d’une webradio Fr-3 Utilisation de Rhapsody (Etats-Unis uniquement) 1 Utilisez q / w pour sélec tionner « Sign in to your account », puis appuyez sur ENTER . Vous devez posséder un compte pour utiliser Rhapsody. Si vous ne di sposez pas encore d’un compte, vous pouvez en créer un à partir de www.
Utilisation d’une webradio Fr-4 Votre ampli-tuner AV Onkyo co mprend un essai gratuit de SiriusXM Internet Radio. L’ écran « Account Info » affiche le nombre de jours restants da ns votre essai. Une fois la période d’essai expirée, si vous souhaitez continuer à écouter le service, vous de vez vous abonner.
Utilisation d’une webradio Fr-5 Last.fm un service de musique qui appr end ce que vous aimez… Votre nouvel ampli-tuner AV O nkyo est très intelligent. Si vous avez un compte Last.fm gr atuit, il garde une trace de toutes les chansons que vous avez juste jouées.
Utilisation d’une webradio Fr-6 Utilisation de Slacker Personal Radio 1 Si vous ne possédez pas de compte, c réez-en un à partir du site Web de Slacker (www.slacker.com) à l’aide de votre ordinateur. Si vous possédez déjà un compte Slacker, sélectionnez « Sign in to your account », puis appuyez sur ENTER .
Uso de In ternet Radio Es-1 Uso de Internet Radio Nota • Los servicios disponibles pueden variar de una región a otra. Procedimientos comunes en el menú Internet Radio 1 Pulse NET . Aparecerá una lista de los servicios de red y se iluminará el indicador NET .
Uso de In ternet Radio Es-2 Pandora es un servicio de radi o por Internet gratuito y personalizado que reproduce la música que usted conoce y le ayudará a descubrir mú sica que le encantará. PANDORA, el logotipo de PANDORA logo, y la imagen corporativa de Pandora son ma rcas comer ciales o marcas comerciales registradas de Pandora Media, Inc.
Uso de In ternet Radio Es-3 Uso de Rhapsody (sólo EE.UU.) 1 Utilice q / w para selec cionar “Sign in to your account” y luego pulse ENTER . Para utilizar Rhapsod y, necesitará una cuenta . Si todavía no tiene una, puede crear una nueva en www.rhapsody.
Uso de In ternet Radio Es-4 Su receptor de AV Onkyo incl uye una prueba gratuita de SiriusXM Internet Radio. La pantalla “Account Info” muestra los días que quedan de la prueba. Una vez que termine el periodo de prueba, si desea seguir escuchando este servicio, deberá contrata rlo.
Uso de In ternet Radio Es-5 Last.fm es un servicio musica l que sabe lo que le gusta... Su nuevo receptor de AV O nkyo es muy inte ligente. Si tiene una cuenta gratuita de Last.fm, hará un seguimiento de todas las canciones que acaba de escuchar. Cuando visite el sitio web de Last.
Uso de In ternet Radio Es-6 Uso de Slacker Personal Radio 1 Si no tiene una cuenta, cree una en el sitio web de Slacker (www.slacker.co m) con su ordenador. Si ya tiene una cuenta d e Slacker, seleccione “Sign in to your account” y pulse ENTER . Aparecerá la pantal la de teclado.
SN 29401189B (C) Copyright 2012 Onkyo Sound & Vision Cor poration Japan. All rights reser ved. Y1203-2 * 2 9 4 0 1 1 8 9 B *.
En-1 Using Internet Radio Using Internet Radio Note • Available services may vary depending on the region. Common Procedures in Internet Radio Menu 1 Press NET . A list of the network serv ices appears, and the NET indicator lights. If it flashe s, verify that the Ethernet cable is firmly connected to the AV receiver.
Using Internet Radio En-2 Last.fm is a music s ervice th at learns what you love... Your new Onkyo AV receiver is very clever. If you have a free Last.
Internetradio verwenden De-1 Internetradio verwenden Anmerkung • Die verfügbaren Dienste sind länderabhängig versch ieden. Allgemeine Verfahren bei den Internetradio-Me nüs 1 Drücken Sie NET . Es erscheint eine Liste der Netzwerkdienste und die NET -Anzeige leucht et.
Internetradio verwenden Last.fm ist ein Musikdiens t, der sich Ihre Lieblingsmusik merkt... Ihr neuer Onkyo AV-Receiver ist äußer st clever. Wenn Sie ein kostenloses Last.fm-Konto ei ngerichtet haben, werden darin all e kürzlich abgespiel ten Titel gesp eichert.
Remote Co ntrol Codes 1 Remote Control Codes / 1 While holding d own the REMOTE MO DE bu tton to which you want to assign a code, press and hold down [DISPLAY] (about 3 seconds). The REMOTE MODE button/ Remote indicator lights. On Integra products, button names are ca pitalized.
Remote Co ntrol Codes 2 Codes de télécommande Códigos de control remoto 1 Tout en maintenant enfoncé le bouton REMOTE MODE auquel vous souhaitez associer un code, pressez et maintenez enfoncé le bou ton [DISPLAY] (pendant environ 3 secondes). Le bouton REMOTE MODE/le témoin Remote s’allume.
Remote Co ntrol Codes 3 Codici del telecomando Fernbedienungscodes 1 Tenendo premuto il tasto REMOTE MODE al quale si desid e ra assegnare il codice, premer e e tenere premut o [DISPLAY] (per circa 3 secon di). Il tasto REMOTE MODE/l'indi catore Remote si acce nde.
Remote Co ntrol Codes 4 Afstandsbedieningscod es Fjärrstyrningskoder 1 Houd terwijl u de REMOTE MODE toets ingedrukt houdt waarvoor u een code wilt toewijzen de [DISPLAY] toet s ingedrukt (ongeveer 3 seconden). De toets REMOTE MODE (afstandsbed ieningsmodus) / Het indicatielampje afstandsbediening gaat branden.
Remote Co ntrol Codes 5 遙控代碼 遥控代码 1 在按住想指定編碼的 REMOTE MODE （遙控模式）按鈕時，同時按住 [DISPLAY] （顯示） （約 3 秒） 。 REMOTE MODE （遙控.
Remote Co ntrol Codes 6 Dedicated On kyo Receiver Default 62503 Zone 2 62506 Zone 3 62507 Cable Set T o p Bo x ADB 02254, 02769 Aon 02769 Arris 02187 AT&T 00858 Bright House 01376, 01877 BT Vision.
Remote Co ntrol Codes 7 AT&T 00858 BT Vision 02294 Cisco 00858, 0234 5, 02378 Kreatel 01385 Motorola 00858, 0237 8 Neuf TV 03107 Philips 02294 Scientific Atlanta 00858 SFR 03107 Verizon 02378 CD A.
Remote Co ntrol Codes 8 Polk Audio 82228 Video - Accessory ADB 02254, 02769 Aon 02769 Apple 02615 AT&T 00858 BT Vision 02294 Canal+ 02657 Cisco 00858, 0234 5, 02378 Kreatel 01385 mio TV 02802 Moto.
Remote Co ntrol Codes 9 Hama 01567 Hanseatic 01100 Hirschmann 00173 Hitachi 01284 Hornet 01300 HTS 00775 Humax 01377, 01176, 014 27, 01675, 0180 8, 01882, 01915, 0214 4, 02408, 02616 ID Digital 01176 .
Remote Co ntrol Codes 10 Star 00887 Stream System 01300 Strong 00853, 0 0879, 01284, 01300, 0140 9, 01626, 02418 Sunny 01300 Sunstar 00642 Supernova 00887 Supratech 01413 Systec 01334 Sytech 0241 8 TB.
Remote Co ntrol Codes 11 Akai 10178, 10556, 10037, 10714, 1071 5, 10208, 11675 Akiba 10037 Akito 10037 Akura 10171, 10037, 10714, 10668, 1103 7, 11363, 11585, 1166 7, 11709 Alba 10037, 10714, 10668, 1.
Remote Co ntrol Codes 12 Erres 10037 ESA 10171 ESC 10037 Euroman 10037 Europa 10037 Europhon 10037 Evesham 11248, 11667 Excello 11037 Exquisit 10037 Ferguson 10037, 1062 5, 10560, 10195, 1103 7, 11585.
Remote Co ntrol Codes 13 Lifetec 10037, 10714, 10668, 11037, 1200 1 Linsar 11585 Local India TV 10208 Local Malaysia TV 10698 Lodos 11037 Loewe 10037, 10512, 118 84 Logik 11037, 10698 Logix 10668 Luma.
Remote Co ntrol Codes 14 Phoenix 10037 Phonola 10556, 10037 Pioneer 10037, 1 0698, 10512, 11457, 1163 6, 12171 Plantron 10037 Playsonic 10037, 10714, 10715, 11652 Powerpoint 10037, 10698 Prinston 1103.
Remote Co ntrol Codes 15 Technosonic 10556, 1 0625, 104 99, 11324 Techvision 11709 Techwood 1103 7, 11667 Tecnimagen 10556 Teco 10178, 1065 3 Tedelex 10208, 11709 Teknika 10150 TELE System 11585 Telec.
Remote Co ntrol Codes 16 Technics 10556 Thomson 10625 DVD 3D LAB 30539 Accurian 30675 Acoustic Solutions 30713 AEG 30675 AFK 31152 Aiwa 30533 Akai 30675 Alba 30539, 30713 Ambiance 33052 Amstrad 30713 .
Remote Co ntrol Codes 17 Radionette 30741 Radiotone 30713 RCA 30522, 30571, 32213, 32587 REC 30490 Red 32213 Redstar 31394 Roadstar 30713 Rotel 30623 Salora 30741 Samsung 30490, 30573, 30199, 30820, 3.
Remote Co ntrol Codes 18 Victor 31597 Yamaha 30646 Zenith 30741 HD-DVD Integra 32901, 33104 33504 LG 30741 Microsoft 32083 Onkyo 32901, 33104 33 504 Xbox 32083 TV/DVD Combination Akai 11675 Black Diam.
Remote Co ntrol Codes 19 Memo.
SN 29401094 (C) Copyright 2012 ONKY O SOUND & VISION CORPORA TION Japan. All rights reserved. * 2 9 4 0 1 0 9 4 * Y1112-1.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Onkyo HT-S6505 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Onkyo HT-S6505 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Onkyo HT-S6505, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Onkyo HT-S6505 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Onkyo HT-S6505, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Onkyo HT-S6505.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Onkyo HT-S6505. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Onkyo HT-S6505 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
