Manuel d'utilisation / d'entretien du produit 157494 du fabricant Northern Industrial Tools
Aller à la page of 21
Prov en Pe rf or mance K-BAR Industries, Faribault, MN, 55021 M157494H Installation, Operation, and Maintenance Manual INDUSTRIAL WATER HEATER: Upgrades cold water pressure washers into hot water/steam cleaners. To the Owner: Thank you for purchasing a NorthStar water heater.
2 Table of Contents Important Safety Instructions 2 Safety Features 12 Grounding Instructions 3 Maintenance Instructions 13-15 Extension Cords 3 Moving and Handling Instructions 16 Specifications 4 Lo.
3 Grounding Instructions This product must be grounded. If it shoul d malfunction or breakdown, grounding prov ides a path of least resistance for electric current to reduce the risk of electrical shock. This product is equi pped with a cord having an equipment-grounding conductor and a grounding plug.
4 Specifications Item Number 157494 Max. Pressure Rating 3000 PSI Max. Flow Output 4 GPM BTU Output 353,700 BTU Temperature Rise 190 ° F @ 2GPM 190 ° F @ 3GPM 140 ° F @ 4GPM Maximum Temperature 250 ° F Approved Fuels #1 or 2 Diesel, Kerosene, Fuel Oil Fuel Capacity 4 gal.
5 Machine Component Identification 157494 Description Ref # Description Ref # Description 1 Water Outlet 6 Fuel Tank 11 Safety Relief Valve 2 Control Box 7 Burner 12 Heating Coil 3 Heat Switch 8 Fuel .
6 Installation Instructions I.) Unpack Separate and identify all components. Use the assembly instructions in this manual for assembly. Handle & Grip Qty-2 Hardw are Bag Qty-1 Wheel Qty-2 Water Heater Qty-1 Remov e 2 retaining blocks.
7 Hardware Bag Owner’s Manual 4X - 5/16 X .75” Flange Bolt 4X - 5/16 Flan g e Nut 2X - 5/8 X 3.5” Hex Bolt 2X - 5/8 Hex Nut 2X - 5/8 Jam Nut.
8 II.) Assembly Instructions 1. Attach handles, see above. 2. Attach wheels, see above. 3. Remove water heater from the pallet. It is recommended that a hoist is used, or that two people lift the unit off of the pallet. If a hoist is used, use the attachment points shown in the Moving and Handling section on page 16.
9 III.) Getting Started IMPORTANT: Proper initial installation of equipment will assure more satisfactory performance, longer service life, and lower maintenance cost. Make sure the water heater is on a level surface and in a protected area where it is not readily influenced by outside forces such as freezing temperatures, strong winds, rain, etc.
10 Operating Instructions Follow these instructions every time y ou use the water heater. I.) Pre-Operation ; A.) Position the machine for easy access to all controls. ; B.) Position the machine on a solid surface, with less than a three degree slope, and so it is protected from external damage.
11 IV.) To Start DANGER: Do not point the spray wand at yourself or at any person. Bodily injury may result from hot water or water under high pressure. WARNING: Wear eye, ear, hand, foot, and skin protection at all times while operating this water heater.
12 Safety Features I.) Safety Relief The safety relief valve is a backup safety feature. If the system’s pressure exceeds it s limits, the safety relief valve will open and relieve system pressure. WARNING: If the safety relief valve ever discharges water, turn the unit off and do not use the machine.
13 Maintenance Instructions WARNING: Unauthorized machine modification or use of non-approved replacement parts may cause personal injury and/or property damage and will void the manufacturer warranty . All mechanical equipment, no matter how well designed, will need r epairs.
14 VII.) Coil Descaling In hard water areas, scale build-up within the heating coil will occur. Scale deposits will decrease the water temperature rise and may eventually clog the heating coil. 1. Mix scale remover in a 5 gallon bucket and elevate the bucket so it is higher than the pump on your pressure washer.
15 IX.) Electrodes On a yearly basis the electrodes should be inspected and any necessary adjustments made. 1. Block up the front of the water heater 6 inches.
16 Moving and Handling Instructions I.) Maneuvering Your Water Heater 1. Lift handles with both hands until the wheels come in contact with the ground and the frame is lifted off of the ground. 2. Push the water heater forward if it is being moved on solid, smooth ground.
17 Troubleshooting Guide Water Heater Will Not Run - No Power Causes Solutions Machine not plugged in Plug machine in. GFCI tripped Make sure machine is dry. Press RESET on the GFCI. Machine turned OFF Turn heat switch ON. Line circuit breaker tripped Check for tripped circuit breaker in building.
18 157494H 157494 Parts Breakdown.
19 157494H ITEM PART# DESCRIPTION QTY 1 5027 1/2” NPT Steel Street Elbow 1 2 38379 1/2” FPT Swivel x 3/8” MPT Straight 1 3 37537 Flow Switch 1 4 777347 3/8” NPT Street Tee 1 5 22392 Safety Rel.
20.
21.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Northern Industrial Tools 157494 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Northern Industrial Tools 157494 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Northern Industrial Tools 157494, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Northern Industrial Tools 157494 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Northern Industrial Tools 157494, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Northern Industrial Tools 157494.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Northern Industrial Tools 157494. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Northern Industrial Tools 157494 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
