Manuel d'utilisation / d'entretien du produit TITAN 2010 du fabricant Nissan
Aller à la page of 407
2010 N I S S AN TIT AN 2010 TIT AN OWN E R'S MAN UAL A6 0-D Printing : March 2009 (16) Publication No.: OM0E-0A6 0U0 Printed in U .S.A. For y our safety , read car efully and keep in this v ehicle.
W elcome to the growing family of new NISSAN owners. This vehicle is delivered to you with confidence. It was produced using the latest techniques and strict quality control. This manual was prepared to help you under- stand the operation and maintenance of your vehicle so that you may enjoy many miles (kilome- ters) of driving pleasure.
MODIFICA TION OF Y OUR VEHICLE This vehicle should not be modified. Modification could affect its performance, safety or durability, and may even violate governmental regulations. In addition, damage or per- formance problems resulting from modi- fications may not be covered under NISSAN warranties.
CALIFORNIA PROPOSITION 65 WARNING WARNING Engine exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to the State of California to cause cancer and birth de- fects or other reproductive harm.
NISSAN CARE S... Both NISSAN and your NISSAN dealer are dedicated to serving all your automotive needs. Y our satisfaction with your vehicle and your NISSAN dealer are our primary concerns. Y our NISSAN dealer is always available to assist you with all your automobile sales and service needs.
T able of Contents Illustrated table of contents Safety—Seats, seat belts and supplemental restraint system Instruments and controls Pre-driving checks and adjustments Display screen, heater, air co.
0 Illustrated table of contents Air bags, seat belts and child restraints ..............0 - 2 Exterior front ......................................0 - 3 Exterior rear .......................................0 - 4 Passenger compartment .................
1. 2nd row seat belts (P . 1-16) 2. Roof-mounted curtain side-impact and rollover supplemental air bag (P . 1-47) 3. Front seat belts (P . 1-16) 4. Front-seat Active Head Restraints 5. Supplemental front-impact air bags (P . 1-47) 6. Seats (P . 1-2) 7.
1. Engine hood (P . 3-12) 2. Windshield wiper and washer switch (P . 2-27) 3. Windshield (P . 8-18) 4. Moonroof (if so equipped) (P . 2-51) 5. P ower windows (P . 2-48) 6. Door locks, keyfob, keys (P . 3-3, 3-8, 3-2) 7. Mirrors (P . 3-16) 8. Tire pressure (P .
1. Rear sliding window (if so equipped) (P . 2-50) 2. V ehicle loading (P . 9-13) 3. T ailgate/T ruckbox (P . 3-21) 4. T railer hitch/T owing (if so equipped) (P . 9-25) 5. Replacing bulbs (P . 8-28) 6. Bedside storage compartment (if so equipped) (P .
1. DVD entertainment system (if so equipped) (P . 4-56) 2. Moonroof (if so equipped) (P . 2-51) 3. Map lights (if so equipped) (P . 2-55) 4. Sun visors (P . 3-15) 5. HomeLink 姞 (if so equipped) (P . 2-55) 6. Glove box (P . 2-42) 7. Cup holders (P . 2-44) 8.
1. V ents (P . 4-13) 2. Headlight/fog light (if so equipped)/turn signal switch (P . 2-29) 3. Steering wheel switch for audio control/Bluetooth 姞 Hands-Free Phone System (if so equipped) (P . 4-54, P . 4-71) 4. Instrument brightness control (P . 2-32) 5.
16. Aux jack (if so equipped) (P . 4-52) 17. P ower outlet (P . 2-38) 18. Heated seat switch (if so equipped) (P . 2-34) 19. Cup holder (P . 2-44) 20. V ehicle dynamic control (VDC) off switch (P . 2-35) 21. T ow mode switch (P . 2-37) 22. Electronic locking rear differential (E-Lock) system switch (if so equipped) (P .
1. Battery (P . 8-13) 2. Fuse/fusible link box (P . 8-20) 3. T ransmission dipstick (P . 8-11) 4. Engine oil filler cap (P . 8-8) 5. Brake fluid reservoir (P . 8-12) 6. Window washer fluid reservoir (P . 8-12) 7. Air cleaner (P . 8-17) 8. Drive belt location (P .
W arning light Name Page or Anti-lock Braking System (ABS) warn- ing light 2-14 Automatic transmis- sion check warning light 2-14 Automatic transmis- sion park warning light ( model) 2-14 or Brake war.
Indicator light Name Page T urn signal/hazard indicator lights 2-20 V ehicle dynamic control (VDC) off indicator light 2-20 0-10 Illustrated table of contents.
1 Safety—Seats, seat belts and supplemental restraint system Seats ............................................1 - 2 Front manual captain’s chair seat adjustment (if so equipped) ................................1 - 2 Front manual bench seat adjustment (if so equipped) .
WARNING ● Do not ride in a moving vehicle when the seatback is reclined. This can be dangerous. The shoulder belt will not be against your body. In an accident, you could be thrown into it and receive neck or other serious injuries. Y ou could also slide under the lap belt and receive serious internal injuries.
Forward and backward Pull the lever up and hold it while you slide the seat forward or backward to the desired position. Release the lever to lock the seat in position. Reclining T o recline the seatback, pull the lever up and lean back. T o bring the seatback forward, pull the lever up and lean your body forward.
Reclining T o recline the seatback, pull the lever up and lean back. T o bring the seatback forward, pull the lever up and lean your body forward. Release the lever to lock the seatback in position.
belt fit (see “Precautions on seat belt usage” later in this section) . Also, the seatback can be re- clined to allow occupants to rest when the ve- hicle is stopped and the shift selector is in P (Park) .
ARMRESTS (if so equipped) T o use the armrests on the captain’s chairs (type A , if so equipped) , pull them down to the resting position. T o use the center armrest on the bench seat (type B, if so equipped) , pull on the tab in the center of the seat and fold it down to the resting position.
The illustration shows the seating positions equipped with head restraints. All of the head restraints are adjustable. 䉱 Indicates the seating position is equipped with a head restraint. Components 1. Head restraint 2. Adjustment notches 3. Lock knob 4.
T o raise the head restraint, pull it up. T o lower, push and hold the lock knob and push the head restraint down. Removal Use the following procedure to remove the ad- justable head restraints. 1. Pull the head restraint up to the highest position. 2.
Install 1. Align the head restraint stalks with the holes in the seat. Make sure the head restraint is facing the correct direction. The stalk with the adjustment notches 䊊 1 must be installed in the hole with the lock button 䊊 2 . 2. Push and hold the lock knob and push the head restraint down.
The illustration shows the seating positions equipped with adjustable headrests. All of the headrests are adjustable. 䡲 Indicates the seating position is equipped with an adjustable headrest. + Indicates the seating position is not equipped with a head restraint or adjustable headrest.
T o raise the headrest, pull it up. T o lower, push and hold the lock knob and push the headrest down. Removal Use the following procedure to remove the ad- justable headrests. 1. Pull the headrest up to the highest position. 2. Push and hold the lock knob.
Install 1. Align the headrest stalks with the holes in the seat. Make sure the headrest is facing the correct direction. The stalk with the ad- justment notches 䊊 1 must be installed in the hole with the lock button 䊊 2 . 2. Push and hold the lock knob and push the headrest down.
Folding the front passenger’s seatback flat (if so equipped) T o fold the front passenger’s seatback flat for extra storage length when transporting long items: 䊊 1 Slide the seat to the rear most position. Then lift up on the recline lever, located on the outside of the seat, and fold the seatback forward as far as it will go.
Folding the rear bench seat T o fold the rear bench seat up for storage capac- ity behind the front seats or to remove the jacking tools from the storage area: 䊊 1 Lift up on the lever, located on the side of the seat, while lifting the front of the seat cushion up.
WARNING ● When the vehicle is being used to carry cargo, properly secure all cargo to help prevent it from sliding or shifting. Do not place cargo higher than the seat- backs. In a sudden stop or collision, unsecured cargo could cause personal injury.
PRECAUTIONS ON SEAT BELT USAGE If you are wearing your seat belt properly ad- justed and you are sitting upright and well back in your seat with both feet on the floor, your chances of being injured or killed in an accident and/or the severity of injury may be greatly reduced.
WARNING ● Every person who drives or rides in this vehicle should use a seat belt at all times. Children should be properly re- strained in the rear seat and, if appro- priate, in a child restraint. WARNING ● The seat belt should be properly ad- justed to a snug fit.
WARNING ● Always route the shoulder belt over your shoulder and across your chest. Never put the belt behind your back, under your arm or across your neck. The belt should be away from your face and neck, but not falling off your shoulder. ● Position the lap belt as low and snug as possible AROUND THE HIPS, NO T THE WAIST .
PREGNANT WOMEN NISSAN recommends that pregnant women use seat belts. The seat belt should be worn snug and always position the lap belt as low as possible around the hips, not the waist. Place the shoulder belt over your shoulder and across your chest.
䊊 2 Slowly pull the seat belt out of the retractor and insert the tongue into the buckle until you hear and feel the latch engage. ● The retractor is designed to lock during a sudden stop or on impact. A slow pulling motion permits the seat belt to move, and allows you some freedom of movement in the seat.
WARNING When fastening the seat belts, be certain that the seatbacks are completely se- cured in the latched position. If they are not completely secured, passengers may be injured in an accident or sudden stop. Unfastening the seat belts 䊊 1 T o unfasten the seat belt, press the button on the buckle.
Shoulder belt height adjustment (front outboard seats) The shoulder belt anchor height should be ad- justed to the position best for you. (See “Precau- tions on seat belt usage” earlier in this section.
Fastening the seat belts 䊊 1 Insert the tongue into the buckle until you hear and feel the latch engage. 䊊 2 Tighten the belt by pulling the free end of the belt away from the tongue. 䊊 3 P osition the lap belt low and snug on the hips as illustrated.
䊊 4 Loosen the belt by holding the tongue at a right angle to the belt, then pull on the belt. Unfastening the seat belts 䊊 1 T o unfasten the seat belt, press the button on the buckle.
● Periodically check to see that the seat belt and the metal components, such as buckles, tongues, retractors, flexible wires and anchors work properly . If loose parts, deterioration, cuts or other damage on the webbing is found, the entire seat belt as- sembly should be replaced.
This is especially important because your vehicle has a supplemental restraint sys- tem (Air bag system) for the front passen- ger. See “Supplemental restraint system” later in this section. INFANTS Infants up to at least 1 year old should be placed in a rear-facing child restraint.
PRECAUTIONS ON CHILD RESTRAINTS WARNING ● Failure to follow the warnings and in- structions for proper use and installa- tion of child restraints could result in serious injury or death of a child or other passengers in a sudden stop or collision: – The child restraint must be used and installed properly.
– Child restraint anchor points are de- signed to withstand loads from child restraints that are properly fitted. – Never use the anchor points for adult seat belts or harnesses. – A child restraint with a top tether strap should not be used in the front passenger seat.
LA T CH (Lower Anchors and T ethers for CHildren) SYSTEM Y our vehicle is equipped with special anchor points that are used with LA T CH (Lower Anchors and T ethers for CHildren) system compatible child restraints. This system may also be referred to as the ISOFIX or ISOFIX compatible system.
Installing child restraint LA T CH lower anchor attachments LA T CH compatible child restraints include two rigid or webbing-mounted attachments that can be connected to two anchors located at certain seating positions in your vehicle. With this sys- tem, you do not have to use a vehicle seat belt to secure the child restraint.
T op tether anchor point locations Anchor points are located under the rear window behind the rear bench seat. REAR-FACING CHILD RESTRAINT INSTALLATION USING LA T CH Refer to all W arnings and Cautions in the “Child Safety” and “Child Restraint” sections before in- stalling a child restraint.
3. For child restraints that are equipped with webbing-mounted attachments, remove any additional slack from the anchor attach- ments. Press downward and rearward firmly in the center of the child restraint with your hand to compress the vehicle seat cushion and seatback while tightening the webbing of the anchor attachments.
5. Check to make sure the child restraint is properly secured prior to each use. If the child restraint is loose, repeat steps 2 through 4. REAR-FACING CHILD RESTRAINT INSTALLATION USING THE SEAT BELTS WARNING The three-point seat belt with Automatic Locking Retractor (ALR) must be used when installing a child restraint.
Refer to all W arnings and Cautions in the “Child Safety” and “Child Restraint” sections before in- stalling a child restraint. Follow these steps to install a rear-facing child restraint using the vehicle seat belts in the rear seats: 1.
4. Allow the seat belt to retract. Pull up on the shoulder belt to remove any slack in the belt. 5. Remove any additional slack from the seat belt; press downward and rearward firmly in the center of the child restraint to compress the vehicle seat cushion and seatback while pulling up on the seat belt.
7. Check to make sure that the child restraint is properly secured prior to each use. If the seat belt is not locked, repeat steps 3 through 6. After the child restraint is removed and the seat belt fully retracted, the ALR mode (child restraint mode) is canceled.
4. For child restraints that are equipped with webbing-mounted attachments, remove any additional slack from the anchor attach- ments. Press downward and rearward firmly in the center of the child restraint with your knee to compress the vehicle seat cushion and seatback while tightening the webbing of the anchor attachments.
Refer to all W arnings and Cautions in the “Child Safety” and “Child Restraint” sections before in- stalling a child restraint. Follow these steps to install a forward-facing child restraint using the vehicle seat belt in the rear seats or in the front passenger seat: 1.
4. Pull the shoulder belt until the belt is fully extended. At this time, the seat belt retractor is in the Automatic Locking Retractor (ALR) mode (child restraint mode) . It reverts to Emergency Locking Retractor (ELR) mode when the seat belt is fully retracted.
7. After attaching the child restraint, test it be- fore you place the child in it. Push it from side to side while holding the child restraint near the seat belt path. The child restraint should not move more than 1 inch (25 mm) , from side to side. T ry to tug it forward and check to see if the seat belt holds the restraint in place.
FORWARD-FACING CHILD RESTRAINT INSTALLATION USING THE SEAT BELTS — FRONT BENCH CENTER POSITION WARNING ● Never install a rear-facing child re- straint in the front passenger seat. Front air bags inflate with great force. A rear-facing child restraint could be struck by the front air bag in a crash and could seriously injure or kill your child.
2. P osition the child restraint on the seat. Al- ways follow the child restraint manufactur- er’s instructions. The back of the child restraint should be secured against the vehicle seat back. If necessary , adjust or remove the head re- straint to obtain the correct child restraint fit.
5. After attaching the child restraint, test it be- fore you place the child in it. Push it from side to side while holding the child restraint near the seat belt path. The child restraint should not move more than 1 inch (25 mm) , from side to side. T ry to tug it forward and check to see if the seat belt holds the restraint in place.
INSTALLING TOP TETHER STRAP (Rear bench seat) T o access the anchor points 䊊 2 behind the rear bench seat, tilt the rear seatback forward by lifting up on the pull strap 䊊 1 behind the seat- back.
Booster seats of various sizes are offered by several manufacturers. When selecting any booster seat, keep the following points in mind: ● Choose only a booster seat with a label certifying that it complies with Federal Motor V ehicle Safety Standard 213 or Canadian Motor V ehicle Safety Standard 213.
Booster seat installation on front passenger seat and rear seat CAUTION Do not use the lap/shoulder belt in the Automatic Locking Retractor mode when using a booster seat with the seat belts. Refer to all W arnings and Cautions in the “Child Safety” , “Child Restraint” and “Booster Seats” sections before installing a child restraint.
If the seating position does not have an adjustable head restraint or headrest and it is interfering with the proper booster seat fit, try another seating position or a different booster seat. 4. P osition the lap portion of the seat belt low and snug on the child’s hips.
Roof-mounted curtain side-impact and rollover supplemental air bag system: This system can help cushion the impact force to the head of occupants in front and rear outboard seating positions in certain side impact or rollover collisions.
● The driver and front passenger seat belt buckles are equipped with sensors that detect if the seat belts are fastened. The Advanced Air Bag System monitors the severity of a collision and seat belt us- age then inflates the air bags. Failure to properly wear seat belts can increase the risk or severity of injury in an accident.
WARNING ● Never let children ride unrestrained or extend their hands or face out of the window. Do not attempt to hold them in your lap or arms. Some examples of dangerous riding positions are shown in the illustrations.
WARNING ● Even with the NISSAN Advanced Air Bag System, never install a rear-facing child restraint in the front seat. An in- flating front air bag could seriously in- jure or kill your child. See “Child re- straints” earlier in this section for details.
WARNING Front seat-mounted side-impact supple- mental air bags and roof-mounted curtain side-impact and rollover supplemental air bags: ● The side air bags and curtain and roll- over air bags ordinarily will not inflate in the event of a frontal impact, rear im- pact, or lower severity side collision.
WARNING ● The seat belts, the side air bags and curtain and rollover air bags are most effective when you are sitting well back and upright in the seat.
1. Roof-mounted curtain side-impact and rollover supplemental air bag 2. Roof-mounted curtain side-impact and rollover supplemental air bags inflators 3. Air bag Control Unit (ACU) 4. Supplemental front-impact air bag mod- ules 5. Crash zone sensor 6.
The driver supplemental front-impact air bag is located in the center of the steering wheel. The passenger supplemental front-impact air bag is mounted in the dashboard above the glove box.
Front passenger air bag and status light WARNING The front passenger air bag is designed to automatically turn OFF under some con- ditions. Read this section carefully to learn how it operates. Proper use of the seat, seat belt and child restraints is nec- essary for most effective protection.
Front passenger seat adult occupants who are properly seated and using the seat belt as out- lined in this manual should not cause the passen- ger air bag to be automatically turned OFF .
Other supplemental front-impact air bag precautions WARNING ● Do not place any objects on the steer- ing wheel pad or on the instrument panel. Also, do not place any objects between any occupant and the steering wheel or instrument panel. Such ob- jects may become dangerous projec- tiles and cause injury if the front air bags inflate.
Front seat-mounted side-impact supplemental air bag and roof- mounted curtain side-impact and rollover supplemental air bag systems The side air bags are located in the outside of the seatback of the front seats. The curtain and roll- over air bags are located in the side roof rails.
WARNING ● Do not place any objects near the seat- back of the front seats. Also, do not place any objects (an umbrella, bag, etc .) between the front door finisher and the front seat. Such objects may become dangerous projectiles and cause injury if a side air bag inflates.
● If you need to dispose of a pretensioner or scrap the vehicle, contact a NISSAN dealer. Incorrect disposal procedures could cause personal injury. The pretensioner system activates in conjunction with the front air bag system.
SUPPLEMENTAL AIR BAG WARNING LIGHT The supplemental air bag warning light, displaying in the instrument panel, moni- tors the circuits of the supplemental front-impact air bag, front seat-mounted side-impact supple- mental air bag, roof-mounted curtain side-impact and rollover supplemental air bag and seat belt pretensioner systems.
WARNING ● Once a front air bag, side air bag or curtain and rollover air bag has inflated, the air bag module will not function again and must be replaced. Addition- ally, if any of the front air bags inflate, the activated pretensioners must also be replaced.
2 Instruments and controls Instrument panel ...................................2 - 2 Meters and gauges ................................2 - 4 Speedometer and odometer .....................2 - 5 T achometer ....................................2 - 6 Engine coolant temperature gauge .
Center armrest storage (if so equipped) .......... 2-41 Glove box .................................... 2-42 Sunglasses holder (if so equipped) .............. 2-42 Map pockets .................................. 2-43 Seatback pocket (if so equipped) ...
1. V ents (P . 4-13) 2. Headlight/fog light (if so equipped)/turn signal switch (P . 2-29) 3. Steering wheel switch for audio control/Bluetooth 姞 Hands-Free Phone System (if so equipped) (P . 4-54, P . 4-71) 4. Instrument brightness control (P . 2-32) 5.
16. Aux jack (if so equipped) (P . 4-52) 17. P ower outlet (P . 2-38) 18. Heated seat switch (if so equipped) (P . 2-34) 19. Cup holder (P . 2-44) 20. V ehicle dynamic control (VDC) off switch (P . 2-35) 21. T ow mode switch (P . 2-37) 22. Electronic locking rear differential (E-Lock) system switch (if so equipped) (P .
1. W arning/indicator lights 2. T achometer 3. Engine coolant temperature gauge 4. V oltmeter (if so equipped) 5. Fuel gauge 6. Speedometer 7. Automatic transmission fluid tempera- ture gauge (if so equipped) 8. Odometer/T win trip odometer/Vehicle Information Display 9.
1. Speedometer 2. Odometer/twin trip display 3. Change button SPEEDOMETER AND ODOMETER Speedometer The speedometer indicates vehicle speed. Odometer/T win trip odometer The odometer/twin trip odometer is displayed when the ignition switch is placed in the ON position.
Elapsed time, driving distance and average speed information is also available for vehicles with navigation system (if so equipped) . Refer to “Control panel buttons” in the “Display screen, heater, air conditioner and audio systems” sec- tion later in this manual.
CAUTION If the gauge indicates coolant tempera- ture near the hot (H) end of the normal range, reduce vehicle speed to decrease temperature. If the gauge is over the nor- mal range, stop the vehicle as soon as safely possible. If the engine is over- heated, continued operation of the ve- hicle may seriously damage the engine.
ENGINE OIL PRESSURE GAUGE (if so equipped) The gauge indicates the engine lubrication sys- tem oil pressure while the engine is running. The needle should be in the middle of the gauge when the engine is running. CAUTION ● This gauge is not designed to indicate low engine oil level.
AUTOMATIC TRANSMISSION FLUID TEMPERATURE GAUGE This gauge indicates the temperature of the au- tomatic transmission fluid. The automatic trans- mission fluid temperature is in the normal range 䊊 1 when the gauge needle points within the zone shown in the illustration.
For information about the automatic anti-glare feature, refer to “ Automatic anti-glare rearview mirror” in the “Pre-driving checks and adjust- ments” section.
Zone variation change procedure The difference between magnetic north and geo- graphical north is known as variance. In some areas, this difference can sometimes be great enough to cause false compass readings. Follow these instructions to set the variance for your particular location if this happens: 1.
1. With the display turned on, press and hold the button for about 13 seconds or the for about 10 seconds. The “C” icon in the compass display will illuminate. 2. Calibrate the compass by driving the vehicle in three complete circles at a maximum speed of 5 MPH (8 km/h) .
or Anti-lock Braking System (ABS) warning light Low fuel warning light High beam indicator light (Blue) Automatic transmission check warning light Low tire pressure warning light Malfunction indicator.
or Anti-lock Braking System (ABS) warning light When the ignition switch is placed in the ON position, the Anti-lock Braking System (ABS) warning light illuminates and then turns off.
WARNING ● Y our brake system may not be working properly if the warning light is on. Driv- ing could be dangerous. If you judge it to be safe, drive carefully to the nearest service station for repairs. Otherwise, have your vehicle towed because driv- ing it could be dangerous.
If the engine or vehicle is not functioning properly , the warning light will either remain illuminated or blink. See “4WD warning light” in the “Starting and driving” section. CAUTION ● If the warning light comes on or blinks during operation, have your vehicle checked by a NISSAN dealer as soon as possible.
WARNING ● If the light does not illuminate with the ignition switch in the ON position, have the vehicle checked by a NISSAN dealer as soon as possible. ● If the light illuminates while driving, avoid sudden steering maneuvers or abrupt braking, reduce vehicle speed, pull off the road to a safe location and stop the vehicle as soon as possible.
If any of the following conditions occur, the front air bag, side air bag, curtain and roll-over air bag, and pretensioner systems need servicing and your vehicle must be taken to a NISSAN dealer: ● The supplemental air bag warning light re- mains on after approximately 7 seconds.
The Malfunction Indicator Light may also come on steady if the fuel-filler cap is loose or missing, or if the vehicle runs out of fuel. Check to make sure the fuel-filler cap is installed and closed tightly , and that the vehicle has at least 3 gallons (11.
The slip indicator light also comes on when you place the ignition switch in the ON position. The light will turn off after about 2 seconds if the system is operational. If the light does not come on or does not go off, have the traction control system checked by a NISSAN dealer.
The vehicle information display 䊊 1 is located to the left of the speedometer. It displays such items as: ● automatic transmission position indicator ● cruise control system information (if so e.
Warning mode (if so equipped) The warning mode can be selected to view any warnings that may be present. Once the screen is selected you have the option of skipping the warning or viewing it in detail. W arnings can be present for issues such as an open door or low fuel.
V ehicle information display warnings and indicators 1. Door open warning 2. Low fuel warning 3. Low windshield washer fluid warning 4. Parking brake warning 5. Cruise main switch indicator (if so equipped) 6. Cruise set switch indicator (if so equipped) 7.
Door open warning This warning illuminates when a door has been opened and the engine is running. Low fuel warning This warning illuminates when the fuel level in the fuel tank is getting low . Refuel as soon as it is convenient, preferably before the fuel gauge reaches E (Empty) .
Y our vehicle may have two types of security sys- tems: ● V ehicle security system (if so equipped) ● NISSAN V ehicle Immobilizer System (if so equipped) V EHICLE SECURITY SYSTEM (if so equipped) The vehicle security system provides visual and audible alarm signals if someone opens the doors when the system is armed.
● If the key is turned slowly when locking the door, the system may not arm. Fur- thermore, if the key is turned beyond the vertical position toward the unlock position to remove the key, the system may be disarmed when the key is re- moved. If the indicator light fails to glow for 30 seconds, unlock the door once and lock it again.
Security indicator light The security indicator light blinks whenever the ignition switch is placed in the L OCK, OFF or ACC position. This function indicates the NISSAN V e- hicle Immobilizer System is operational.
CAUTION ● Do not operate the washer continu- ously for more than 30 seconds. ● Do not operate the washer if the reser- voir tank is empty. ● Do not fill the window washer reservoir tank with washer fluid concentrates at full strength.
CAUTION When cleaning the inner side of the rear window, be careful not to scratch or dam- age the rear window defroster. HEADLIGHT CONTROL SWITCH Lighting 䊊 1 When turning the switch to the posi- tion, the front parking, tail, license plate and instrument panel lights come on.
Autolight system (if so equipped) The autolight system allows the headlights to be set so they turn on and off automatically . The autolight system can: ● T urn on the headlights, front parking, tail, license plate and instrument panel lights au- tomatically when it is dark.
Be sure you do not put anything on top of the autolight sensor 䊊 1 located on the top side of the instrument panel. The autolight sensor controls the autolight ; if it is cov- ered, the autolight sensor reacts as if it is dark out and the headlights will illuminate.
If the parking brake is applied before the engine is started, the daytime running lights do not illumi- nate. The daytime running lights illuminate when the parking brake is released. The daytime run- ning lights will remain on until the ignition switch is placed in the OFF position.
FOG LIGHT SWITCH (if so equipped) T o turn the fog lights on, turn the headlight switch to the position, then turn the fog light switch to the position. T o turn the fog lights on with the headlight switch in the AUT O position (if so equipped) , the head- lights must be on, then turn the fog light switch to the position.
T o turn on the cargo lamp, push the switch down to the ON position. The tailgate lights (if so equipped) will also illuminate when the cargo lamp switch is in the ON position. CAUTION Be sure to turn the light switch to the OFF position when you leave the vehicle for extended periods of time, otherwise the battery will go dead.
CAUTION ● Do not use the seat heater for extended periods or when no one is using the seat. ● Do not put anything on the seat which insulates heat, such as a blanket, cush- ion, seat cover, etc . Otherwise, the seat may become overheated. ● Do not place anything hard or heavy on the seat or pierce it with a pin or similar object.
When the E-Lock switch is turned ON, the indi- cator light will flash until the system engages. However, if all operation conditions listed above are not met or the system becomes disengaged, the indicator light will continue to flash. The Anti-Lock Brake (ABS) system is disabled and the ABS light illuminates when the E-Lock system is ON.
The rear sonar system can be disabled by push- ing the OFF switch. When the system is disabled, the indicator light on the switch will illuminate. Push the switch again to enable the system. The indicator light will go off. The system will automatically reset the next time the ignition switch is turned on.
The power outlets are for powering electrical accessories such as cellular telephones. The power outlets located on the driver’s side of the instrument panel and in the truck box are powered directly by the vehicle’s battery .
● Push the plug in as far as it will go. If good contact is not made, the plug may overheat or the internal temperature fuse may open. ● When not in use, be sure to close the cap. Do not allow water to contact the outlet. Do not use the outlet located in the truck box with accessories that exceed 12 volt, 120W (15A) power draw .
CONSOLE BOX (if so equipped) Console box storage trays Console box storage Pull up on the lever 䊊 1 to open the console box lid 䊊 2 . Center tray (if so equipped) LIC0566 LIC1369 LIC1370 2-40 Inst.
Console box lock Use the master key to lock 䊊 1 or unlock 䊊 2 the console box. CENTER ARMREST STORAGE (if so equipped) T o access the center armrest storage area, lower the center armrest and lift the lid.
GLOVE BOX Open the glove box by pulling the handle. Use the master key to lock or unlock the glove box lock (if so equipped) . The valet key cannot be used. WARNING Keep glove box lid closed while driving to help prevent injury in an accident or a sudden stop.
MAP POCKETS SEATBACK POCKET (if so equipped) The seatback pocket is located on the back of the driver’s seat. The pocket can be used to store maps. OVERHEAD CONSOLE (if so equipped) LIC0589 LIC0575 .
Storage bins WARNING Keep storage bins closed while driving to help prevent injury in an accident or a sudden stop. Push the button to open a storage bin. Push the lid up to close. CUP HOLDERS CAUTION ● Avoid abrupt starting and braking when the cup holder is being used to prevent spilling the drink.
P osition the arm on the adjustable cup holder so that the cup is held securely. T o open the 2nd row cup holders (rear of front console) , lower the lid.
CAUTION ● Do not use bottle holder for any other objects that could be thrown about in the vehicle and possibly injure people during sudden braking or an accident.
GROCERY HOOKS (if so equipped) The grocery hooks allow for standard size plastic grocery bags to hang side by side. T o access the grocery hooks, fold up the rear bench seat. See “Folding the rear bench seat” in the “Safety — Seats, seat belts and supplemental restraint system” section earlier in this manual.
P OWER WINDOWS (if so equipped) WARNING ● Make sure that all passengers have their hands, etc . inside the vehicle while it is in motion and before closing the windows. Use the window lock switch to prevent unexpected use of the power windows. ● Do not leave children unattended inside the vehicle.
Front passenger’s power window switch The passenger’s window switch operates only the corresponding passenger’s window . T o open the window , push the switch and hold it down 䊊 1 .
Auto-reverse function The auto-reverse function can be activated when a window is closed by automatic operation. Depending on the environment or driving conditions, the auto-reverse function may be activated if an impact or load similar to something being caught in the window oc- curs.
REAR POWER WINDOW SWITCH (if so equipped) T o open the rear power window , push in and hold the switch. T o close the rear power window , pull out and hold the switch.
T o fully close the moonroof, push the switch toward the close position 䊊 4 . T o open or close the moonroof part way , push the switch in any direction 䊊 5 while the moonroof is sliding open or closed to stop it in the desired position. Tilting the moonroof T o tilt the moonroof up, push the tilt switch to- ward the up position 䊊 1 .
Sunshade Open and close the sunshade by sliding it for- ward or backward. If the moonroof does not close Have your NISSAN dealer check and repair the moonroof. The interior light has a three-position switch and operates regardless of ignition switch position.
The lights will turn off while the 30 second timer is activated when: ● The driver’s door is locked by the keyfob, a key , or the power door lock switch. ● The ignition switch is turned ON. When the switch is in the OFF position 䊊 3 , the interior lights do not illuminate, regardless of door position.
T o turn the map lights on, press the switches. T o turn them off, press the switches again. CAUTION Do not use for extended periods of time with the engine stopped.
PROGRAMMING HOMELINK 姞 1. T o begin, press and hold the two outer HomeLink 姞 buttons (to clear the memory) until the indicator light 䊊 1 blinks (after 20 seconds) . Release both buttons. 2. P osition the end of the hand-held transmitter 1 - 3 inches (26 - 76 mm) away from the HomeLink 姞 surface.
7. Within 30 seconds of pressing and releas- ing the garage door opener’s program but- ton, quickly and firmly press and release the HomeLink 姞 button you’ve just programmed. Press and release the HomeLink 姞 button up to 3 times to complete the training.
REPROGRAMMING A SINGLE HOMELINK 姞 BUTTON T o reprogram a HomeLink 姞 Universal T ransceiver button, complete the following. 1. Press and hold the desired HomeLink 姞 but- ton.
3 Pre-driving checks and adjustments K e y s .............................................3 - 2 NISSAN vehicle immobilizer system keys (if so equipped) ................................3 - 2 Doors ............................................3 - 3 Locking with key .
1. T wo master keys (black) with transpon- der chip (if so equipped) and chrome NISSAN brand symbol on one side 2. V alet key (black) with transponder chip (if so equipped) 3. K ey number plate 4. T ransponder chip (if so equipped) A key number plate is supplied with your keys.
When the doors are locked using one of the following methods, the doors can not be opened using the inside or outside door handles. The doors must be unlocked to open the doors.
Opening and closing windows The driver’s door key operation allows you to open and close windows equipped with auto- matic operation at the same time. ● T o open the windows, turn the driver’s door key toward the rear of the vehicle for longer than 1 second after the door is unlocked.
Lockout protection When the power door lock switch (driver’s or front passenger’s side) is moved to the lock position with the key in the ignition switch and any door open, all doors will lock and then unlock automatically . This helps to prevent the keys from being accidently locked inside the vehicle.
From the inside, pull the inside door handle to- ward you. The door will unlock automatically . 3. Open the door to the desired position. LPD0267 LPD0265 3-6 Pre-driving checks and adjustments.
CHILD SAFETY REAR DOOR LOCK (Crew Cab models only) Child safety locks help prevent the rear doors from being opened accidentally , especially when small children are in the vehicle. The child safety lock levers are located on the edge of the rear doors.
It is possible to lock/unlock all doors, turn on the interior lights and puddle lights (if so equipped) , and activate the panic alarm by using the keyfob from outside the vehicle. Some settings for the keyfob, such as horn beep, can be adjusted. For vehicles without navigation system, refer to “Silencing the horn beep feature” in this section.
HOW TO USE REMOTE KEYLESS ENTRY SYSTEM Locking doors 1. Close all windows. 2. Remove the key from the ignition switch. 3. Close the hood and all doors. 4. Press the button on the keyfob. All the doors lock. The hazard warning lights flash twice and the horn beeps once to indicate all doors are locked.
Press the button on the keyfob again within 5 seconds. ● All doors unlock. ● The hazard warning lights flash once if all doors are completely closed.
NO TE: If you change the horn beep and light flash feature with the keyfob, the display screen (if so equipped) will not show the current mode and cannot be used to change the mode. Use the keyfob to return to the pre- vious mode and re-enable the display screen control.
䊊 1 Pull the hood lock release handle located below the driver side instrument panel. The hood will spring up slightly . 䊊 2 Push the lever at the front of the hood to the side as illustrated with your fingertips and raise the hood. When closing the hood, lower it slowly and make sure it locks into place.
WARNING ● Gasoline is extremely flammable and highly explosive under certain condi- tions. Y ou could be burned or seriously injured if it is misused or mishandled. Always stop the engine and do not smoke or allow open flames or sparks near the vehicle when refueling.
TILT OPERATION WARNING Do not adjust the steering wheel while driving. Y ou could lose control of your vehicle and cause an accident. Pull the lock lever forward and hold it to adjust the steering wheel up or down to the desired posi- tion. Release the lock lever to lock the steering wheel in place.
䊊 1 T o block glare from the front, swing down the main sun visor. 䊊 2 T o block glare from the side, remove the main sun visor from the center mount and swing the visor to the side. 䊊 3 T o block glare from the side and front, swing down the sub-sun visor (if so equipped) .
V ANITY MIRRORS (if so equipped) T o access the vanity mirror, pull the sun visor down and flip open the mirror cover (if so equipped) . Some vanity mirrors are illuminated and turn on when the mirror cover is open. REARVIEW MIRROR (if so equipped) The night position 䊊 1 reduces glare from the headlights of vehicles behind you at night.
AUTOMATIC ANTI-GLARE REARVIEW MIRROR (if so equipped) The inside mirror is designed so that it automati- cally dims during night time conditions and ac- cording to the intensity of the headlights of the vehicle following you. The automatic anti-glare feature is activated when the ignition switch is in the ON position.
T ype B With the ignition switch in the ON position, press the button as described: ● T o turn off the automatic anti-glare feature, press the button. The indicator light will turn off. ● T o turn on the automatic anti-glare feature, press the button again.
Electric control type (if so equipped) The outside mirror remote control will operate only when the ignition switch is placed in the ACC or ON position. Move the small switch 䊊 1 to select the right or left mirror. Adjust each mirror to the desired position using the large switch 䊊 2 .
Pull the trailer tow mirror outward to extend it to the desired position for better visibility while tow- ing a trailer. WARNING Do not extend or retract mirrors while driv- ing. Y ou may lose control of your vehicle and cause an accident. CAUTION Driving in tight spaces with mirrors ex - tended may cause damage to the vehicle.
P ower folding outside mirrors (if so equipped) CAUTION Do not manually fold the power folding mirrors. Manually folding the mirrors can damage the mirrors.
For proper truck box loading see “V ehicle loading information” in the “T echnical and consumer in- formation” section of this manual. WARNING ● It is extremely dangerous to ride in a cargo area inside a vehicle. In a colli- sion, people riding in these areas are more likely to be seriously injured or killed.
Locking the tailgate T o unlock the tailgate, turn the key toward the passenger side of the vehicle 䊊 1 . T o lock, turn the key toward the driver side 䊊 2 . Both the master key and the valet key can be used to lock and unlock the tailgate. TIE DOWN HOOKS For your convenience, tie down hooks are placed at each corner of the truck box.
The automatic drive positioner system has two features: ● Memory storage function ● Entry/exit function MEMORY STORAGE FUNCTION T wo positions for the driver’s seat, accelerator and brake pedals, and outside mirrors can be stored in the automatic drive positioner memory .
2. While the indicator light for the memory switch being set is illuminated for 5 sec- onds, press the button on the keyfob. The indicator light will blink. After the indica- tor light goes off, the keyfob is linked to that memory setting. With the key removed from the ignition switch, press the button on the keyfob.
The entry/exit function can be adjusted or can- celed. For vehicles with a navigation system, see “V ehicle electronic systems” in the “Display screen, heater, air conditioner, audio and phone systems” section of this manual. For vehicles without navigation system, see your NISSAN dealer.
MEMO Pre-driving checks and adjustments 3-27.
4 Display screen, heater, air conditioner, audio and phone systems Control panel buttons (if so equipped) ...............4 - 2 How to use the joystick and ENTER button ........4 - 3 How to use the BACK button . ...................4 - 3 Setting up the start-up screen .
Playing a digital video disc (DVD) ............... 4-60 Care and maintenance ......................... 4-63 How to handle the DVD ........................ 4-63 Car phone or CB radio ............................ 4-66 Bluetooth 姞 Hands-Free Phone System (if so equipped) .
WARNING ● Positioning of the heating or air condi- tioning controls and display controls should not be done while driving in or- der that full attention may be given to the driving operation. ● Do not disassemble or modify this sys- tem. If you do, it may result in accidents, fire, or electrical shock.
9. GUIDE VOICE button* 10. zoom out button* 11. zoom in button* *For Navigation system control buttons, refer to the separate Navigation System Owner’s Manual. CAUTION ● The glass screen on the liquid crystal display may break if it is hit with a hard or sharp object.
HOW TO USE THE TRIP BUTTON When the TRIP button is pressed, the following modes will display on the screen. W arning message (if any) → TRIP 1 → TRIP 2 → FUEL ECONOMY → MAINTENANCE → Audio o.
Resetting fuel economy The average fuel economy calculation can be reset to 0. Press the TRIP button repeatedly until the FUEL ECONOMY menu is shown, then ei- ther: ● Select the “Reset” key on screen by press- ing the ENTER button, or ● Press the TRIP button for more than approxi- mately 1.
Resetting the maintenance interval The ENGINE OIL and TIRE RO T A TION mainte- nance intervals can be reset to 0 miles (kilome- ters) . Select the “Reset” key using the joystick and press the ENTER button.
Tire pressure information T o display tire pressure information, press the TRIP button repeatedly until the MAINTENANCE screen is displayed. Select the “Tire Pressure” key using the joystick and press the ENTER but- ton. Pressure indication in ** psi on the screen indi- cates that the pressure is being measured.
Display settings Select the “Display” key and press the ENTER button. The DISPLA Y SETTINGS screen will ap- pear. Brightness/contrast : Select the “Brightness/Contrast” key to adjust the brightness and contrast of the map back - ground. Use the joystick to adjust the brightness to darker or brighter and the contrast to lower or higher.
T o turn the screen on, ● Press the SETTING button and select the “Display” key and then select the “Display Off” key. Then set the screen to on by press- ing the ENTER button, or ● Hold t.
NO TE: If you change the horn beep or the lamp flash feature with the keyfob, the display screen will not show the current mode. Use the keyfob to return to the previous mode and re-enable the display screen control.
Y ou can select the language and unit using the joystick or pressing the ENTER button. The settings are automatically saved when you exit the menu by pressing the BACK button or any other mode button. Clock Adjusting the time: Select the “Hours” or “Minutes” key and move the joystick to the right or left to adjust the time.
Adjusting the time to the GPS: Select the “ Auto Adjust” key. The time will be reset to the GPS time. Selecting the time zone: 1. Select the “Select Time Zone” key . The TIME Z ONE screen will appear. 2. Select one of the following zones, depend- ing on the current location.
The GPS time (manual time) corresponding to the selected zone will be displayed. Pacific zone has been set as the initial (default) setting. Beep setting With this option ON, a beep will sound if any audio button is pressed. Navigation settings Refer to the separate Navigation System Own- er’s Manual for information regarding these set- tings.
WARNING ● The air conditioner cooling function op- erates only when the engine is running. ● Do not leave children or adults who would normally require the assistance of others alone in your vehicle. Pets should also not be left alone. They could accidentally injure themselves or others through inadvertent operation of the vehicle.
— Air flows from center and side vents. — Air flows from center and side vents and the front and rear floor outlets. — Air flows mainly from the front and rear floor outlets. — Air flows from defroster out- lets and the front and rear floor outlets.
1. T urn the air flow control dial to the position. 2. T urn the fan control dial to the desired posi- tion. 3. T urn the temperature control dial to the de- sired position between the middle and the hot position.
The air conditioner cooling function oper- ates only when the engine is running. Cooling This mode is used to cool and dehumidify the air. 1. Press the button to the OFF position. 2. Press the air flow control button. 3. T urn the fan control dial to the desired posi- tion.
T ype A WHA0916 T ype A WHA0917 4-18 Display screen, heater, air conditioner, audio and phone systems.
T ype A WHA0918 T ype A WHA0919 Display screen, heater, air conditioner, audio and phone systems 4-19.
WARNING ● The air conditioner cooling function op- erates only when the engine is running. ● Do not leave children or adults who would normally require the assistance of others alone in your vehicle. Pets should also not be left alone. They could accidentally injure themselves or others through inadvertent operation of the vehicle.
1. Fan speed control dial 2. Air recirculation button 3. T emperature control dial 4. Air conditioner button 5. Air flow control dial 6. Rear window defroster switch (if so equipped) CONTROLS Fan control dial The fan control dial turns the fan on and off, and controls fan speed.
● for maximum cooling when using the air con- ditioner. The air recirculation mode is only functional when the air flow control mode is in the following positions: or OFF position: Push the button again to turn air recircula- tion off. Outside air is drawn into the passenger compartment and distributed through the se- lected outlet.
● When the position is selected, the air conditioner automatically turns on (however, the indicator light on the button will not come on) if the outside temperature is more than 36°F (2°C) . If in defrost mode for more than one minute, the air conditioning system will continue to operate until the ve- hicle is shut off.
● For quick cooling when the outside tem- perature is high, push the button to the ON position. The indicator light on the button will come on. ( will appear on the display , if so equipped.) Be sure to return the to the OFF position for normal cooling.
T ype B WHA1079 T ype B WHA1080 Display screen, heater, air conditioner, audio and phone systems 4-25.
T ype B WHA1081 T ype B WHA1082 4-26 Display screen, heater, air conditioner, audio and phone systems.
T ype B WHA1471 Display screen, heater, air conditioner, audio and phone systems 4-27.
1. Driver temperature control dial 2. A/C ON/OFF button 3. Front window defroster button 4. Fan speed control dial 5. System OFF button 6. Rear window defroster button 7. Air recirculation button 8. Passenger temperature control dial 9. DUAL button 10.
● The temperature of the passenger compart- ment will be maintained automatically . Air flow distribution, fan speed and A/C on/off are also controlled automatically . ● A visible mist may be seen coming from the vents in hot, humid conditions as the air is cooled rapidly .
The sunload sensor 䊊 1 , located on the top center of the instrument panel, helps the system main- tain a constant temperature. Do not put anything on or around this sensor. The air conditioner system in your NISSAN ve- hicle is charged with a refrigerant designed with the environment in mind.
Reception conditions will constantly change be- cause of vehicle movement. Buildings, terrain, signal distance and interference from other ve- hicles can work against ideal reception. De- scribed below are some of the factors that can affect your radio reception.
AUDIO OPERATION PRECAUTIONS Compact disc (CD) player CAUTION ● Do not force a compact disc into the CD insert slot. This could damage the CD and/or CD changer/player. ● T rying to load a CD with the CD door closed could damage the CD and/or CD changer.
CHECK DISC: ● Confirm that the CD is inserted cor- rectly (the label side is facing up, etc .) . ● Confirm that the CD is not bent or warped and it is free of scratches. PRESS EJECT: This is an error due to excessive tem- perature inside the player.
Playback order: Music playback order of a CD with MP3 or WMA files is as illustrated. ● The names of folders not containing MP3 or WMA files are not shown in the display . ● If there is a file in the top level of the disc, “Root Folder” is displayed.
Specification chart : Supported media CD, CD-R, CD-RW Supported file systems ISO9660 LEVEL1, ISO9660 LEVEL2, Apple ISO, Romeo, Joliet * ISO9660 Level 3 (packet writing) is not supported.
T roubleshooting guide: Symptom Cause and Countermeasure Cannot play Check if the disc was inserted correctly . Check if the disc is scratched or dirty . Check if there is condensation inside the player. If there is, wait until the condensation is gone (about 1 hour) before using the player.
1. PRESET A·B·C button 2. CD eject button 3. MENU button 4. CD insert slot 5. CD button 6. FM·AM button 7. TUNE buttons 8. RPT button 9. PWR button/VOL control knob 10.
MENU button (BASS, TREBLE , FADE , BAL - ANCE and CLOCK) : Press the MENU button to change the mode as follows: BAS → TRE → FA D → BAL → CL OCK → Audio → BAS T o adjust Bass, T reble, Fade and Balance, press the MENU button until the desired mode appears in the display .
The FM stereo indicator, ST , illuminates during FM stereo reception. When the stereo broadcast signal is weak, the radio automatically changes from stereo to monaural reception. TUNE buttons: Manual tuning Press the TUNE or button for less than 0.5 seconds for manual tuning.
When is pressed, the track being played returns to the beginning. Press several times to skip back several tracks. Each time the button is pressed, the CD moves back one track. SEEK (Scan CDs) button: Press and hold the SEEK button for more than 1.5 seconds to scan through the first 10 seconds of a track on the compact disc.
1. SEEK/TRACK button 2. TUNE/FOLDER·CA T button 3. DISP button 4. SCAN RPT button 5. PRESET A·B·C button 6. CD·DVD button 7. RADIO button* 8. AUX button 9. REAR ON·OFF button 10. speaker control button 11. L OAD button 12. CD insert slot 13. CD eject button 14.
1. SEEK/TRACK button 2. TUNE/FOLDER·CA T button 3. DISP button 4. SCAN RPT button 5. PRESET A·B·C button 6. CD button 7. FM button 8. AM button 9. SA T (satellite) button* 10. AUX button 11. L OAD button 12. CD insert slot 13. CD eject button 14. POWER/VOLUME control knob 15.
1. SEEK/TRACK button 2. CA T FOLDER button 3. Display 4. SCAN button 5. RPT RDM button 6. H/M button (clock set buttons) 7. PRESET A·B·C button 8. CD button 9. FM AM button 10. SA T (satellite) radio button* 11. AUX button 12. DISP button 13. L OAD button 14.
1. SEEK/TRACK button 2. CA T FOLDER button 3. Display 4. SCAN RPT button 5. DISP button 6. H/M button (clock set buttons) 7. PRESET A·B·C button 8. CD·DVD button 9. RADIO button* 10. AUX button 11. REAR ON·OFF button 12. speaker control button 13.
1. PRESET A·B·C button 2. Display 3. DISP/CL OCK button 4. SEEK/TRACK button 5. CD button 6. RADIO button* 7. AUX button 8. SCAN RPT button 9. CA T FOLDER button 10. CD L OAD button 11. CD insert slot 12. CD eject button 13. PWR/VOL (power/volume) control knob 14.
FM/AM/SA T RADIO WITH COMPACT DISC (CD) CHANGER (T ype A , B, C, D and E) (if so equipped) For all operation precautions, see “ Audio opera- tion precautions” earlier in this section.
The display will return to the regular clock display after 7 seconds, or you may press the DISP/CL OCK button again to return to the regu- lar clock display . For setting the clock on T ype A and B audio systems see “ Adjusting the time” in this section.
Display satellite radio display mode (if so equipped) T o change the text displayed when listening to satellite radio (if so equipped) press the DISP button. The DISP button will scroll through the broadcast information as follows: Name ←→ Title ←→ Current display mode.
TUNE/FOLDER·CA T button (T ype A , B , C and D only) : Manual tuning T o manually tune the radio, press the TUNE/FOLDER·CA T button or ,o r turn the tuning knob to right or left. T o move quickly through the channels, press and hold either the or button down for more than 1.
Radio data system (RDS) : RDS stands for Radio Data System, and is a data information service transmitted by some radio stations on the FM band (not AM band) . Cur- rently , most RDS stations are in large cities, but many stations are now considering broadcasting RDS data.
back through tracks. The compact disc will go back the number of times the button is pressed. When the button is pressed while the compact disc is playing, the next track will start to play from its beginning. Press several times to skip through tracks.
REAR ON·OFF (if so equipped) : Pressing the REAR ON·OFF button for less than 1.5 seconds turns the rear seat audio controller on. REAR CONT ON will display . Pressing it again will turn the rear seat audio controller off. REAR CONT OFF will display .
CD CARE AND CLEANING ● Handle a CD by its edges. Do not bend the disc. Never touch the surface of the disc. ● Always place the discs in the storage case when they are not being used. ● T o clean a disc, wipe the surface from the center to the outer edge using a clean, soft cloth.
1. V olume control switch 2. Phone operation switch 3. P ower on and MODE select switch 4. T uning switch STEERING WHEEL SWITCH FOR AUDIO CONTROL (if so equipped) The audio system can be operated using the controls on the steering wheel.
1. VOL (volume) control button 2. MODE select button 3. speaker control button 4. NEXT button 5. SEEK button 6. Headphone jacks 7. Infrared headphone transmitter lens* *Red transmitters will be visible when infrared headphones are on.
VOL (volume) button: The VOL button allows the rear passengers to adjust the headphone volume level. The vehicle volume can also be changed if the REAR CTRL is enabled and the rear audio mode is the same as the front. (SPEAKER CONTROL) button: Press this button to turn the rear speakers off and headphones on.
CAUTION ● The glass screen on the liquid crystal display may break if hit with a hard or sharp object. If the glass breaks, do not touch the liquid crystalline material, which contains a small amount of mer- cury. In case of contact with skin, wash immediately with soap and water.
1. POWER button 2. ST OP button 3. NEXT TRACK/CHAPTER and PREVI- OUS TRACK/CHAPTER button 4. TITLE button 5. ENTER button 6. DISPLA Y button 7. MODE button 8. SUBTITLE button 9. AUDIO button 10. ANGLE button 11. CLEAR button 12. P AUSE button 13. PLA Y button 14.
● The screen rotates down to view and up into the housing to store when not in use. Ensure that the screen is latched securely into the housing when stored. Headphones Power ON/OFF: Press the power button to turn the headphones on or off. V olume control: T urn the volume control knob to adjust the vol- ume.
PLAYING A DIGITAL VIDEO DISC (DVD) CAUTION ● Only operate the DVD while the vehicle engine is running. Operating the DVD for extended periods of time with the engine OFF can discharge the vehicle battery. ● Do not allow the system to get wet. Excessive moisture such as spilled liq- uids may cause the system to malfunction.
FF (Fast Forward) , REW (Remote control only) : Press the F AST FORW ARD/FAST REVERSE buttons to carry out the fast forward or fast re- verse presentation at 5 times normal play speed. Press the F AST FORW ARD/FAST REVERSE buttons again or PLA Y button to resume the normal play speed.
If the DISPLA Y control button on the faceplate is pressed for more than 2 seconds, the media track/time information will be displayed along the bottom of the display . Pressing the DISPLA Y control for more than 2 seconds will remove the media track/time information from the display .
Use the “ ≥ 10” button to input numbers greater than or equal to 10. Up to three digits can be inputted when selecting the chapter/title/track number. The subsequent actuation of numeric buttons will continuously shift the previously input number to the “left” .
● A new disc may be rough on its inner and outer edges. Remove the rough edges using the side of a pen or pencil as illustrated. ● Never attempt to use a DVD that has been cracked, deformed, or repaired using adhesive. Doing so may cause damage to the equipment.
5. If the disc cannot be ejected see your NISSAN dealer for further assistance. 6. Re-program the radio presets. Remote control and headphones battery replacement Replace the battery as follows: 1.
● When changing batteries, do not let dust or oil get on the remote control and head- phones. FCC Notice: Changes or modifications not expressly ap- proved by the party responsible for compli- ance could void the user’s authority to op- erate the equipment.
WARNING ● Use a phone after stopping your vehicle in a safe location. If you have to use a phone while driving, exercise extreme caution at all times so full attention may be given to vehicle operation.
module when the ignition switch is placed in the ON position with the paired cellular phone turned on and carried in the vehicle. Y ou can register up to 5 different Bluetooth 姞 cellular phones to the in-vehicle phone module. However, you can talk on only one cellular phone at a time.
BLUETOOTH 威 is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed to Visteon. USING THE SYSTEM The NISSAN V oice Recognition system allows hands-free operation of the Bluetooth 姞 Phone System. If the vehicle is in motion, some commands may not be available so full attention may be given to vehicle operation.
● T o speed the operation you can say multiple commands. For example, press the button then say “Phonebook, New entry” rather than “Phonebook.” W ait for the voice feedback prompt then say “New entry” . How to say numbers NISSAN V oice Recognition requires a certain way to speak numbers in voice commands.
CONTROL BUTTONS The control buttons for the Bluetooth 姞 Hands- Free Phone System are located on the steering wheel. PHONE/SEND Press the button to initiate a VR session or answer an incoming call. Y ou can also use the button to skip through system feedback and to enter commands during a call.
Pairing procedure NO TE: The pairing procedure must be performed when the vehicle is stationary. If the vehicle starts moving during the procedure, the procedure will be cancelled. Main Menu “Setup” 䊊 A “Pair phone” 䊊 B “New phone” 䊊 C Initiate from handset 䊊 D Name phone 䊊 E Assign priority 䊊 F Choose ringtone 䊊 G 1.
3-digit prefix and the last 4-digits. For ex- ample, 555-121-3354 can be said as “five five five” as the 1st group, then “one two one” as the 2nd group, and “three three five four” as the 3rd group. For dialing more than 10 digits or any special characters, say “In- ternational” .
See “Phone book” later in this section to learn how to store entries. When prompted by the system, say the name of the phone book entry you wish to call. The system acknowledges the name. If there are multiple locations associated with the name, the system asks you to choose the loca- tion.
NO TE: If a call is ended or the cellular phone network connection is lost while the Mute feature is on, the Mute feature will be reset to “off” for the next call so the other party can hear your voice. “Phone book” NO TE: Phone book commands are not available when the vehicle is moving.
“Edit” 䊊 B Use the Edit command to alter an existing phone book entry or to add a 2nd, 3rd or 4th phone number to an existing entry . When prompted by the system, say the name of the entry you wish to edit. The system acknowledges the name and asks you for the location you would like to edit.
“Record” 䊊 A The system announces “Recording” and a tone sounds, signaling you to begin. Speak the information you wish to record clearly . When you are done, press the or button on the steering wheel. A tone sounds and the system announces “Memo recorded.
“Select phone” 䊊 C Use the Select Phone command to select a phone of lesser priority when two or more phones paired with Bluetooth 姞 Hands-Free Phone Sys- tem are in the vehicle at the same time. The system asks you to name the phone and confirm the selection.
SPEAKER ADAPTATION (SA) MODE Speaker Adaptation allows up to two out-of- dialect users to train the system to improve rec- ognition accuracy . By repeating a number of commands, the users can create a voice model of their own voice that is stored in the system.
● No ● select ring tone ● dial eight five six nine two ● Bluetooth on ● setup change priority ● call three one nine oh two ● nine seven pause pause three oh eight ● Cancel ● call bac.
T ROUBLESHOOTING GUIDE The system should respond correctly to all voice commands without difficulty . If problems are en- countered, try the following solutions. Where the solutions are listed by number, try each solution in turn, starting with number 1, until the problem is resolved.
5 Starting and driving Precautions when starting and driving ................5 - 2 Exhaust gas (carbon monoxide) ..................5 - 2 Three-way catalyst ..............................5 - 2 On-pavement and off-road driving precautions ..............
Special winter equipment ....................... 5-37 Driving on snow or ice . ........................ 5-37 Engine block heater (if so equipped) .....
WARNING ● Do not leave children or adults who would normally require the assistance of others alone in your vehicle. Pets should also not be left alone. They could accidentally injure themselves or others through inadvertent operation of the vehicle.
CAUTION ● Do not use leaded gasoline. Deposits from leaded gasoline will seriously re- duce the three-way catalyst’s ability to help reduce exhaust pollutants. ● Keep your engine tuned up. Malfunc- tions in the ignition, fuel injection, or electrical systems can cause overrich fuel flow into the three-way catalyst, causing it to overheat.
Please note that the TPMS is not a substitute for proper tire maintenance, and it is the driver’s responsibility to maintain correct tire pressure, even if under-inflation has not reached the level to trigger illumination of the TPMS low tire pressure telltale.
WARNING ● If the low tire pressure warning light illuminates while driving, avoid sudden steering maneuvers or abrupt braking, reduce vehicle speed, pull off the road to a safe location and stop the vehicle as soon as possible. Driving with under- inflated tires may permanently damage the tires and increase the likelihood of tire failure.
AVOIDING COLLISION AND ROLLOVER WARNING Failure to operate this vehicle in a safe and prudent manner may result in loss of control or an accident. Be alert and drive defensively at all times.
WARNING The following actions can increase the chance of losing control of the vehicle if there is a sudden loss of tire air pressure. Losing control of the vehicle may cause a collision and result in personal injury. ● The vehicle generally moves or pulls in the direction of the flat tire.
● Many hills are too steep for any vehicle. If you drive up them, you may stall. If you drive down them, you may not be able to control your speed. If you drive across them, you may roll over. ● Do not shift gears while driving on downhill grades as this could cause loss of control of the vehicle.
● If at all possible, avoid sharp turning ma- neuvers, particularly at high speeds. Y our NISSAN four-wheel drive vehicle has a higher center of gravity than a passenger car. The vehicle is not designed for cor- nering at the same speeds as passenger cars.
T o remove the key from the ignition switch: 1. Shift the shift selector to the P (Park) posi- tion with the ignition switch in the ON posi- tion. 2. Place the ignition switch in the L OCK posi- tion.
NISSAN V EHICLE IMMOBILIZER SYSTEM (if so equipped) The NISSAN V ehicle Immobilizer System will not allow the engine to start without the use of the registered key .
● If the engine is very hard to start because it is flooded, depress the accelerator pedal all the way to the floor and hold it. Crank the engine for 5 to 6 seconds. After cranking the engine, release the accel- erator pedal. Crank the engine with your foot off the accelerator pedal by turn- ing the ignition key to ST ART .
WARNING Overheating can result in reduced engine power and vehicle speed. The reduced speed may be lower than other traffic , which could increase the chance of a col- lision. Be especially careful when driving. If the vehicle cannot maintain a safe driv- ing speed, pull to the side of the road in a safe area.
T o move the shift selector: : Shift while depressing the brake pedal : Shift without depressing brake pedal Shifting – console After starting the engine, fully depress the brake pedal and move the shift selector out of the P (Park) position.
Do not downshift into the 4 position at speeds over the following and do not exceed the follow- ing speeds in the 4 position. 4H: 62 MPH (100 km/h) 4L O: 31 MPH (50 km/h) 3 (Third gear) : Use this position for driving up and down long slopes where engine braking would be advanta- geous.
WARNING Apply the parking brake if the shift selec- tor is in any position while the engine is not running. Failure to do so could cause the vehicle to move unexpectedly or roll away and result in serious personal injury or property damage.
Shift ranges up or down one by one as follows: M1 ←→ M2 ←→ M3 ←→ M4 ←→ D M4 (Fourth) : For driving up or down long slopes where engine braking would be advantageous. Shift ranges up or down one by one as follows: M1 ←→ M2 ←→ M3 ←→ M4 M4 will be displayed on the position indicator in the meter.
Shift lock release If the battery is discharged, the shift selector may not be moved from the P (Park) position even with the brake pedal depressed. T o move the shift selector, release the shift lock.
Fail-safe When the fail-safe operation occurs, please note that the transmission will be locked in any of the forward gears according to the condition. If the vehicle is driven under extreme con- ditions, such as excessive wheel spinning and subsequent hard braking, the fail-safe system may be activated.
1. ACCEL/RES switch 2. COAST/SET switch 3. CANCEL switch 4. ON·OFF switch PRECAUTIONS ON CRUISE CONTROL ● If the cruise control system malfunctions, it cancels automatically .
● Push the ON·OFF switch off. Both the CRUISE indicator light and SET indicator light in the vehicle information display go out. The cruise control is automatically canceled and the SET light in the vehicle information display goes out if: ● you depress the brake pedal while pushing the ACCEL/RES or SET/COAST switch.
● Accelerate slowly and smoothly . Maintain cruising speeds with a constant accelerator position. ● Drive at moderate speeds on the highway . Driving at high speed lowers fuel economy . ● Avoid unnecessary stopping and braking. Maintain a safe distance behind other ve- hicles.
CAUTION ● Do not drive the vehicle in the 4H or 4LO position on dry hard surface roads. Driv- ing on dry, hard surfaces in 4H or 4LO may cause unnecessary noise, tire wear and increased fuel consumption. If the 4WD warning light turns on when you are driving on dry hard surface roads: – in the 4H position, shift the 4WD shift switch to 2WD.
T RANSFER CASE SHIFTING PROCEDURES The part time 4WD system provides 3 positions (2WD, 4H and 4L O) , so you can select the desired drive mode according to the driving con- ditions.
*1: Before moving the shift selector from neutral, wait until the 4L O indicator light stays on steady. This indicates that the 4WD shift procedure is completed and the transfer gear is correctly set in the 4L O position.
The transfer case 4WD shift switch is used to select either 2WD or 4WD depending on the driving conditions. There are three types of drive modes available, 2WD, 4H and 4L O. The 4WD shift switch electronically controls the transfer case operation. Rotate the switch to move between each mode, 2WD, 4H and 4L O.
● If it is difficult to free the vehicle, rock the vehicle back and forth between reverse and drive gears. ● If the vehicle is stuck deep in mud, place stones or wooden blocks under the tires. Then try the recovery procedures above. Tire chains may be effective.
The 4WD shift indicator light is located in the vehicle information display . The light should turn off within 1 second after turning the ignition switch to the ON position. While the engine is running, the 4WD shift indi- cator light will illuminate the position selected by the 4WD shift switch.
● When the warning light comes on, the 2WD mode may be engaged even if the 4WD shift switch is in 4H . Be especially careful when driving. If corresponding parts are malfunctioning, the 4WD mode will not be engaged even if the 4WD shift switch is shifted.
CAUTION ● After using the E-Lock system, turn the switch OFF to prevent possible damage to driveline components from extended use. ● Do not drive the vehicle at speeds faster than 12 mph (20 km/h) when the system is engaged. Doing so could damage drivetrain components.
1. Firmly apply the parking brake. 2. Move the shift selector to the P (Park) position. 3. T o help prevent the vehicle from rolling into traffic when parked on an incline, it is a good practice to turn the wheels as illustrated.
WARNING ● While driving on a slippery surface, be careful when braking, accelerating or downshifting. Abrupt braking or accel- erating could cause the wheels to skid and result in an accident. ● If the engine is not running or is turned off while driving, the power assist for the brakes will not work.
WARNING Do not pump the brake pedal. Doing so may result in increased stopping distances. Normal operation The ABS operates at speeds abov e3-6M P H( 5 - 10 km/h) . The speed varies according to road conditions. When the ABS senses that 1 or more wheels are close to locking up, the actuator rapidly applies and releases hydraulic pressure.
The V ehicle Dynamic Control (VDC) system uses various sensors to monitor driver inputs and ve- hicle motion. Under certain driving situations, the system will control braking and engine output to help keep the vehicle on its steered path.
● When driving on extremely inclined sur- faces such as higher banked corners, the V ehicle Dynamic Control system may not operate properly and the VDC OFF indicator light may come on.
will sound for only three seconds. Once the sys- tem detects an object approaching, the tone will sound again. The RSS automatically turns on when the shift selector is placed in R (Reverse) and the ignition is ON. The RSS OFF switch on the instrument panel allows the driver to turn the RSS on and off.
3. Tire chains may be used. For details see “Tire chains” in the “Maintenance and do-it- yourself” section of this manual. SPECIAL WINTER EQUIPMENT It is recommended that the following items be carried in the vehicle during winter: ● A scraper and stiff-bristled brush to remove ice and snow from the windows and wiper blades.
T o use the engine block heater: 1. T urn the engine off. 2. Open the hood and unwrap the engine block heater cord. 3. Plug the engine block heater cord into a grounded 3-wire, 3-pronged extension cord. 4. Plug the extension cord into a Ground Fault Interrupt (GFI) protected, grounded 110- volt AC (V AC) outlet.
6 In case of emergency Flat tire ...........................................6 - 2 Tire Pressure Monitoring System (TPMS) ..........6 - 2 Changing a flat tire .............................6 - 2 Jump starting .....................................6 - 8 Push starting .
TIRE PRESSURE MONITORING SYSTEM (TPMS) This vehicle is equipped with the Tire Pressure Monitoring System (TPMS) . It monitors tire pres- sure of all tires except the spare. When the low tire pressure warning light is lit, one or more of your tires is significantly under-inflated.
WARNING ● Make sure the parking brake is securely applied and the automatic transmission is shifted into P (Park) . ● Never change tires when the vehicle is on a slope, ice or slippery areas. This is hazardous. ● Never change tires if oncoming traffic is close to your vehicle.
2. Unscrew and remove the jack and tool kit. 3. Assemble the two pieces of the jack rod. Find the oval-shaped opening above the middle of the license plate. Pass the T -shaped end of the jack rod through the opening and direct it toward the spare tire winch, located directly above the spare tire.
CAUTION Be sure to center the spare tire suspend- ing plate on the wheel and then lift the spare tire. Jacking up vehicle and removing the damaged tire WARNING ● Never get under the vehicle while it is supported only by the jack. If it is nec- essary to work under the vehicle, sup- port it with safety stands.
2. Place the jack directly under the jack -up point as illustrated so the top of the jack contacts the vehicle at the jack -up point. The jack -up points are indicated by stamped ar- rows on the side of the frame. The jack should be used on firm and level ground.
5. Remove the wheel nuts and then remove the tire. Installing the spare tire The spare tire is designed for emergency use. See specific instructions under the heading “ Wheels and tires” in the “Mainte- nance and do-it-yourself” section of this manual.
Adjust tire pressure to the COLD pressure. COLD pressure: After vehicle has been parked for three hours or more or driven less than 1 mile (1.6 km) . COLD tire pressures are shown on the Tire and Loading Information label affixed to the driver side center pillar.
● Whenever working on or near a battery, always wear suitable eye protectors (for example, goggles or industrial safety spectacles) and remove rings, metal bands, or any other jewelry. Do not lean over the battery when jump starting. ● Do not attempt to jump start a frozen battery.
CAUTION ● Always connect positive ( ⫹ ) to positive ( ⫹ ) and negative ( ⫺ ) to body ground (for example, strut mounting bolt, engine lift bracket, etc .) — not to the battery. ● Make sure the jumper cables do not touch moving parts in the engine com- partment and that the cable clamps do not contact any other metal.
3. Get out of the vehicle. Look and listen for steam or coolant escaping from the radiator before opening the hood. (If steam or cool- ant is escaping, turn off the engine.) Do not open the hood further until no steam or coolant can be seen. 4. Open the engine hood.
For information about towing your vehicle behind a recreational vehicle (RV) , refer to “Flat towing” in the “T echnical and consumer information” sec- tion of this manual.
If the speed or distance must necessarily be greater, remove the propeller shaft before towing to prevent damage to the transmission. Four-wheel drive models NISSAN recommends that towing dollies be used when towing your vehicle or place the ve- hicle on a flat bed truck as illustrated.
V EHICLE RECOVERY (freeing a stuck vehicle) Pulling a stuck vehicle If your vehicle is stuck in sand, snow , mud, etc., use a tow strap or other device designed specifi- cally for vehicle recovery . Always follow the re- covery device manufacturer’s instructions.
● Release the accelerator pedal before shifting between R and D. ● Do not spin the tires above 35 mph (55 km/h) or above 12 mph (20 km/h) if the E–Lock System is engaged. 6. If the vehicle cannot be freed after a few tries, contact a professional towing service to remove the vehicle.
MEMO 6-16 In case of emergency.
7 Appearance and care Cleaning exterior ..................................7 - 2 W ashing ......................................7 - 2 W axing ........................................7 - 2 Removing spots ................................7 - 3 Underbody .
In order to maintain the appearance of your ve- hicle, it is important to take proper care of it. T o protect the paint surfaces, please wash your vehicle as soon as you can: ● after a rainfall to prevent possible damage from acid rain. ● after driving on coastal roads.
REMOVING SPOTS Remove tar and oil spots, industrial dust, insects, and tree sap as quickly as possible from the surface of the paint to avoid lasting damage or staining. Special cleaning products are available at a NISSAN dealer or any automotive accessory store.
Occasionally remove loose dust from the interior trim, plastic parts and seats using a vacuum cleaner or soft bristled brush. Wipe the vinyl and leather surfaces with a clean, soft cloth damp- ened in mild soap solution, then wipe clean with a dry , soft cloth.
Floor mat positioning aid This vehicle includes two driver’s side front floor mat brackets and one passenger’s side front floor mat bracket to help keep your floor mats in place. NISSAN floor mats have been specially designed for your vehicle model.
T emperature High temperatures accelerate the rate of corro- sion to those parts which are not well ventilated. Air pollution Industrial pollution, the presence of salt in the air in coastal areas, or heavy road salt use acceler- ates the corrosion process.
8 Maintenance and do-it-yourself Maintenance requirements ..........................8 - 2 General maintenance ..............................8 - 2 Explanation of general maintenance items .........8 - 2 Maintenance precautions . . .....................
Y our NISSAN has been designed to have mini- mum maintenance requirements with long ser- vice intervals to save you both time and money . However, some day-to-day and regular mainte- nance is essential to maintain your NISSAN’s good mechanical condition, as well as its emis- sions and engine performance.
When driving in areas using road salt or other corrosive materials, check lubrication frequently . Lights* Clean the headlights on a regular basis. Make sure that the headlights, stop lights, tail lights, turn signal lights, and other lights are all operating properly and installed securely .
Seat belts Check that all parts of the seat belt system (for example, buckles, anchors, adjusters and retractors) operate properly and smoothly , and are installed securely .
When performing any inspection or maintenance work on your vehicle, always take care to prevent serious accidental injury to yourself or damage to the vehicle.
1. Battery 2. Fuse/fusible link box 3. T ransmission dipstick 4. Engine oil filler cap 5. Brake fluid reservoir 6. Window washer fluid reservoir 7. Air cleaner 8. Drive belt location 9. Radiator cap 10. P ower steering fluid reservoir 11. Engine oil dipstick 12.
The engine cooling system is filled at the factory with Genuine NISSAN Long Life Antifreeze/Coolant to provide year-round anti- freeze and coolant protection. The anti-freeze solution contains rust and corrosion inhibitors. Additional engine cooling system additives are not necessary .
If the cooling system frequently requires coolant, have it checked by a NISSAN dealer. CHANGING ENGINE COOLANT A NISSAN dealer can change the engine coolant. The service procedure can be found in the NISSAN Service Manual. Improper servicing can result in reduced heater performance and engine overheat- ing.
5. Remove the dipstick again and check the oil level. It should be between the H (High) and L (Low) marks 䊊 B . This is the normal oper- ating oil level range. If the oil level is below the L (Low) mark 䊊 A , remove the oil filler cap and pour recommended oil through the opening.
If the oil filter is to be changed, remove and replace it at this time. See “Changing engine oil filter” later in this section. ● Waste oil must be disposed of prop- erly. ● Check your local regulations. WARNING ● Prolonged and repeated contact with used engine oil may cause skin cancer.
5. Wipe the engine oil filter sealing surface with a clean rag. CAUTION Be sure to remove any old gasket material remaining on the sealing surface of the engine. Failure to do so could lead to an oil leak and engine damage. 6. Coat the gasket on the new filter with clean engine oil.
For further brake fluid specification information, refer to “Capacities and recommended fuel/lubricants” in the “T echnical and consumer information” section of this manual. WARNING ● Use only new fluid from a sealed con- tainer. Old, inferior or contaminated fluid may damage the brake system.
Refill the reservoir more frequently when driving conditions require an increased amount of win- dow washer fluid. Recommended fluid is Genuine NISSAN Wind- shield W asher Concentrate Cleaner & Anti- freeze or equivalent. CAUTION ● Do not substitute engine anti-freeze coolant for window washer solution.
1. Remove the vent caps with a screwdriver as shown. Use a cloth to protect the battery case. 2. Check the fluid level in each cell. If it is necessary to add fluid, add only distilled water to bring the level up to the bottom of the filler opening. Do not overfill.
CAUTION ● Do not ground accessories directly to the battery terminal. Doing so will by- pass the variable voltage control sys- tem and the vehicle battery may not charge completely. ● Use electrical accessories with the en- gine running to avoid discharging the vehicle battery.
WARNING Be sure the ignition switch is in the OFF or LOCK position before servicing drive belt. The engine could rotate unexpectedly. 1. Visually inspect the belt for signs of unusual wear, cuts, fraying or looseness. If the belt is in poor condition or is loose, have it replaced or adjusted by a NISSAN dealer.
The air cleaner filter should not be cleaned and reused. Replace it according to the maintenance log shown in the “NISSAN Service and Mainte- nance Guide.” T o remove the air cleaner filter: 䊊 1 Unlatch the clips and move the air cleaner cover upward.
2. Remove the filter cover bolt and remove the filter cover. NO TE: The filters are marked with air flow arrows. The end of the filter with the arrow should face the rear of the vehicle. The arrows should face downward. 3. Insert the first filter into the housing and slide it over to the right.
REPLACING Replace the wiper blades if they are worn. 1. Lift the wiper arm away from the windshield. 䊊 2 Push the release tab, then move the wiper blade down the wiper arm to remove. 䊊 3 Remove the wiper blade. 4. Insert the new wiper blade onto the wiper arm until it clicks into place.
If the brakes do not operate properly , have the brakes checked by a NISSAN dealer. Self-adjusting brakes Y our vehicle is equipped with self-adjusting brakes.
If a type A fuse is used to replace a type B fuse, the type A fuse will not be level with the fuse pocket as shown in the illustration. This will not affect the performance of the fuse. Make sure the fuse is installed in the fuse box securely . T ype B fuses cannot be installed in the under- hood fuse boxes.
5. If the fuse is open 䊊 A , replace it with a new fuse 䊊 B . 6. If a new fuse also opens, have the electrical system checked and repaired by a NISSAN dealer. Fusible links If the electrical equipment does not operate and fuses are in good condition, check the fusible links.
5. If the fuse is open 䊊 A , replace it with an equivalent good fuse 䊊 B . 6. Push the fuse box cover to install. 7. If a new fuse also opens, have the electrical system checked and repaired by a NISSAN dealer. CAUTION Be careful not to allow children to swallow the battery or removed parts.
K EYFOB (if so equipped) Replace the battery in the keyfob as follows: 䊊 1 Open the lid using a coin 䊊 A . 䊊 2 Remove the battery 䊊 B . 䊊 3 Install a new battery 䊊 C with the “+” facing down. ● Hold the battery by the edges. Holding the battery across the contact points will seri- ously deplete the storage capacity .
FCC Notice: Changes or modifications not expressly ap- proved by the party responsible for compli- ance could void the user’s authority to op- erate the equipment.
● Do not leave the bulb out of the fog light for a long period of time as dust, mois- ture and smoke may enter the fog light body and affect the performance of the fog light. 1. Disconnect the negative (-) battery cable. 2. The fog light is accessible in front of the front tire and behind the bumper.
EXTERIOR AND INTERIOR LIGHTS Item W attage (W) Bulb No. Headlight assembly High 60/65 HB3/9005 Low 51/55 HB4/9006 Park/T urn 8/27 3457K Sidemarker 3.8 194 Side turn signal light* (if so equipped) (LED) — Front fog light (if so quipped) 37.
1. Room/map light (if so equipped) 2. Personal lights (if so equipped) 3. Step light (if so equipped) 4. Puddle lamp/Side turn signal light (if so equipped) 5. High-mount stoplight/cargo lights 6. License plate light 7. Rear combination/tailgate light (if so equipped) assembly 8.
Use a cloth 䊊 1 to protect the housing. Use a cloth 䊊 1 to protect the housing. Use a cloth 䊊 1 to protect the housing. Room/map lights LDI0389 Personal lights (If so equipped) LDI0364 V anity m.
Use a cloth 䊊 1 to protect the housing. Use a cloth 䊊 1 to protect the housing. Use a cloth 䊊 1 to protect the housing. Step light (If so equipped) LDI0341 Puddle light LDI0388 Puddle light (If .
If you have a flat tire, see “Flat tire” in the “In case of emergency” section of this manual. TIRE PRESSURE Tire Pressure Monitoring System (TPMS) This vehicle is equipped with the Tire Pressure Monitoring System (TPMS) . It monitors tire pressure of all 4 tires except the spare.
For more details, refer to “W arning/Indicator Lights and Audible Reminders” in the “Instruments and con- trols” section, “Tire pressure information” in the “Display screen, heater, air .
Tire and loading information label 䊊 1 Seating capacity: The maximum num- ber of occupants that can be seated in the vehicle. 䊊 2 V ehicle load limit: See loading infor- mation in the “T echnical and con- sumer information” section. 䊊 3 Original tire size: The size of the tires originally installed on the vehicle at the factory .
Checking tire pressure 1. Remove the valve stem cap from the tire. 2. Press the pressure gauge squarely onto the valve stem. Do not press too hard or force the valve stem side- ways, or air will escape. If the hissing sound of air escaping from the tire is heard while checking the pressure, reposition the gauge to eliminate this leakage.
TIRE LABELING Federal law requires tire manufacturers to place standardized information on the sidewall of all tires. This information iden- tifies and describes the fundamental characteristics of the tire and also pro- vides the tire identification number (TIN) for safety standard certification.
䊊 2 TIN (Tire Identification Number) for a new tire (example: DO T XX XX XXX XXXX) 1. DO T : Abbreviation for the “Depart- ment Of T ransportation”. The symbol can be placed above, below or to the left or right of the Tire Identification Number.
䊊 7 The word “radial” The word “radial” is shown if the tire has radial structure. 䊊 8 Manufacturer or brand name Manufacturer or brand name is shown.
Generally , snow tires have lower speed ratings than factory equipped tires and may not match the potential maximum vehicle speed. Never ex- ceed the maximum speed rating of the tire. If you install snow tires, they must be the same size, brand, construction and tread pattern on all four wheels.
Wheel nut tightening torque: 98 ft-lb (133 N·m) The wheel nuts must be kept tight- ened to specifications at all times. It is recommended that wheel nuts be tightened to specification at each tire rotation interval. WARNING ● After rotating the tires, check and adjust the tire pressure.
Replacing wheels and tires When replacing a tire, use the same size, tread design, speed rating and load carrying capacity as originally equipped. Recommended types and sizes are shown in “Wheels and tires” in the “T echnical and consumer information” section of this manual.
If excessive tire wear is found, it is recommended that all four tires be replaced with tires of the same size, brand, construction and tread pattern. The tire pressure and wheel alignment should also be checked and corrected as necessary . Contact a NISSAN dealer.
9 T echnical and consumer information Capacities and recommended fuel/lubricants .........9 - 2 Fuel recommendation (without Flexible Fuel V ehicle option) .................................9 - 3 Flexible fuel vehicle (FFV) fuel recommendation (if so equipped) .
Event Data Recorders (EDR) ....................... 9-45 Owner’s Manual/Service Manual order information . . . 9-46 In the event of a collision ......
The following are approximate capacities. The actual refill capacities may be a little different. When refilling, follow the procedure described in the “Maintenance and do-it-yourself” section to determine the proper refill capacity.
FUEL RECOMMENDATION (without Flexible Fuel V ehicle option) Use unleaded regular gasoline with an octane rating of at least 87 AKI (Anti-Knock Index) num- ber (Research octane number 91) . CAUTION ● Only vehicles with the E-85 filler door label can operate on E-85.
T ake care not to spill gasoline during refu- eling. Gasoline containing oxygenates can cause paint damage. E–85 fuel E-85 fuel is a mixture of approximately 85% fuel ethanol and 15% unleaded gasoline. E-85 can only be used in a Flexible Fuel V ehicle (FFV) .
General information This information is for Flexible Fuel vehicles (FFV) only . FFV vehicles can be identified by the fuel filler door label that states Ethanol (E-85) or Unleaded Gasoline Only . This section only cov- ers those subjects that are unique to Flexible Fuel vehicles.
CAUTION Do not use ethanol mixture greater than 85% in your vehicle. It will cause difficulty in cold starting and may affect drivability. ENGINE OIL AND OIL FILTER RECOMMENDATIONS Selecting the correct oil It is essential to choose the correct grade, quality and viscosity engine oil to ensure satisfactory engine life and performance.
Oil viscosity The engine oil viscosity or thickness changes with temperature. Because of this, it is important to select the engine oil viscosity based on the temperatures at which the vehicle will be oper- ated before the next oil change. Choosing an oil viscosity other than that recommended could cause serious engine damage.
ENGINE Model VK56DE T ype Gasoline, 4-cycle, DOHC Cylinder arrangement 8-cylinder, V-block, Slanted at 90° Bore x Stroke in (mm) 3.858 x 3.622 (98 x 92) Displacement cu in (cm 3 ) 338.78 (5,552) Firing order 1–8–7–3–6–5–4–2 Idle speed No adjustment is necessary .
WHEELS AND TIRES Wheels 18 x 8.0J 20 x 8.0J Tires P265/70R18 P275/70R18 P275/60R20 Spare tire Full size DIMENSIONS AND WEIGHTS Overall length Short wheel base (SWB) in (mm) 224.6 (5,704) Long wheel base (L WB) in (mm) 244.3 (6,204) Overall width in (mm) 79.
When planning to drive your NISSAN ve- hicle in another country, you should first find out if the fuel available is suitable for your vehi- cle’s engine. Using fuel with an octane rating that is too low may cause engine damage. All gasoline vehicles must be operated with unleaded gasoline.
ENGINE SERIAL NUMBER The number is stamped on the engine as shown. F .M.V .S.S./C.M.V .S.S. CERTIFICATION LABEL The Federal/Canadian Motor V ehicle Safety Standard (F .
TIRE AND LOADING INFORMATION LABEL The cold tire pressure is shown on the Tire and Loading Information label. The label is located as shown. AIR CONDITIONER SPECIFICATION LABEL The air conditioner specification label is affixed to the underside of the hood as shown.
WARNING ● It is extremely dangerous to ride in a cargo area inside a vehicle. In a collision, people riding in these areas are more likely to be seri- ously injured or killed. ● Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts.
Do not exceed the load limit of your ve- hicle shown as “The combined weight of occupants and cargo” on the Tire and Loading Information label (if so equipped) . Do not exceed the number of occupants shown as “Seating Capacity” on the Tire and Loading Information label (if so equipped) .
Steps for determining correct load limit 1. Locate the statement “The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs” on your vehicle’s placard. 2. Determine the combined weight of the driver and passengers that will be riding in your vehicle.
5. Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4. 6. If your vehicle will be towing a trailer, load from your trailer will be trans- ferred to your vehicle.
1. Side channels 2. Header channel 3. Channel sections 4. Floor channels UTILI-TRACK™ CHANNEL SYSTEM (if so equipped) WARNING ● Properly install and tighten the tie- down cleats into the Utili-track™ chan- nel system. Also, do not attach any rope or straps directly to the channel.
3. Insert the cleat into the channel perpendicu- lar to the channel as shown. Then rotate the cleat clockwise 90° and slide it to the de- sired location.
5. There should be no gap between the bottom of the cleat and the top of the channel. Tighten the center bolt hand tight (20-40 inch pounds) . WTI0124 T echnical and consumer information 9-19.
CAUTION ● Install only one cleat per section of channel. ● Applying loads at angles to the cleats greater then 45° or loads greater than 150 lbs. (header and floor channels) or 200 lbs.
WARNING Do not install accessories over the gap between the front and rear side channels. Doing this could affect the rear structure in certain rear impacts, which could result in serious injury. CAUTION Properly secure all cargo with ropes or straps to prevent it from sliding or shifting.
Install the channels end stoppers as follows: 1. Remove the channel protectors by sliding them out the back of the truck bed. Properly store the channel protectors. 2. Loosen the bolt on the center of the end stopper with the provided wrench and insert it into the channel.
CREW CAB MODELS Crew Cab short wheel base models should not be used to carry a slide-in camper. KING CAB MODELS This information is provided for you to properly install a slide-in camper and is based on the National Highway T raffic Safety Administration regulations.
When the truck is used to carry a slide-in camper, the total cargo load of the truck consists of the camper manufacturer’s weight figure, plus: ● the weight of installed additional camper equipment not included in the camper manufacturer’s weight figure, ● the weight of camper cargo, ● and the weight of occupants in the camper.
WARNING Overloading or improper loading of a trailer and its cargo can adversely affect vehicle handling, braking and perfor- mance and may lead to accidents. CAUTION ● Do not tow a trailer or haul a heavy load for the first 500 miles (800 km) . Y our engine, axle or other parts could be damaged.
T emperature conditions can also affect towing. For example, towing a heavy trailer in high outside temperatures on graded roads can affect engine performance and cause overheating. The engine protection mode, which helps reduce the chance of engine damage, could activate and automati- cally decrease engine power.
Maximum Gross V ehicle Weight (GVW)/maximum Gross Axle W eight (GA W) The GVW of the towing vehicle must not exceed the Gross V ehicle W eight Rating (GVWR) shown on the F .
● Gross V ehicle W eight Rating (GVWR) from F .M.V .S.S./C.M.V .S.S. certification label - 7,100 lb. (3221 kg) . ● Gross Combined W eight Rating (GCWR) from “T owing Load/Specification ⬙ chart - 15,100 lb. (6849 kg) . ● Maximum T railer towing capacity from “T ow- ing Load/Specification ⬙ chart - 9,200 lb.
T OWING LOAD/SPECIFICATION T owing load specification chart with tow package — short wheel base 2WD 4WD KC C C KC C C SE SE LE SE OR SE/OR LE Maximum T owing Capacity *1, *2, *3 9,500 lb. (4309 kg) 9,400 lb. (4264 kg) 9,200 lb. (4173 kg) 9,400 lb. (4264 kg) 9,300 lb.
T owing load specification chart with tow package — long wheel base 2WD 4WD KC CC KC CC XE SE LE XE SE LE XE SE LE XE/SE OR LE Maximum T owing Capacity *1, *2, *3 9,400 lb. (4264 kg) 9,400 lb. (4264 kg) 9,100 lb. (4128 kg) 9,300 lb. (4218 kg) 9,300 lb.
T owing load specification chart without tow package — short wheel base 2WD 4WD KC C C KC CC XE SE XE SE LE XE SE OR XE SE LE OR Maximum T owing capacity*1, *2, *3 7,400 lb. (3357 kg) 7,400 lb. (3357 kg) 7,400 lb. (3357 kg) 7,400 lb. (3357 kg) 7,100 lb.
T owing load specification chart without tow package — long wheel base 2WD 4WD CC CC SE SE Maximum T owing capacity*1, *2, *3 7,100 lb. (3221 kg) 7,000 lb. (3175 kg) Maximum T ongue load *2, *3 710 lb. (321 kg) 700 lb. (318 kg) Maximum King pin load 1,065 lb.
T OWING SAFETY T railer hitch Y our vehicle may be equipped with an optional trailer tow package. The trailer tow package in- cludes a receiver-type frame mounted hitch. This hitch is rated for the maximum towing capacity of this vehicle when the proper towing equipment is used.
Bumper towing The genuine NISSAN step bumper has provi- sions to install a trailer hitch ball and is designed to tow trailers of a maximum weight of 5,000 lb (2,268 kg) . T o install a trailer hitch ball cut out the circle in the center of the step bumper 䊊 A , then remove it to install the trailer hitch ball.
Sway control device Sudden maneuvers, wind gusts, and buffeting caused by other vehicles can affect trailer han- dling. Sway control devices may be used to help control these affects.
● Regularly check that all trailer hitch mounting bolts are securely mounted. ● When towing with the hitch ball mounted to the rear bumper, do not make sharp turns. The trailer may con- tact the bumper and cause damage to the bumper or trailer. ● When towing a 5th wheel trailer, do not make sharp turns while driving or back - ing.
Electric T railer Brakes - Electric braking sys- tems are activated by an electronic signal sent from a trailer brake controller (special brake- sensing module) . If electric trailer brakes are used, see ⬙ Electric trailer brake controller ⬙ in this section.
2. Apply the parking brake to access the jumper harness connector. 3. Locate the jumper harness connector under the lower portion of the instrument panel. The connector is taped to the wiring harness 䊊 1 as indicated. ● The connector is marked with a white tag with “elec brake conn” .
4. Peel off the tape and connect the jumper harness to the connector 䊊 2 . 5. Release the parking brake. 6. Install the aftermarket electric trailer brake controller according to the manufacturer’s instructions. Pre-towing tips ● Be certain your vehicle maintains a level position when a loaded and/or unloaded trailer is hitched.
Always block the wheels on both vehicle and trailer when parking. Parking on a slope is not recommended; however, if you must do so: CAUTION If you move the shift selector to the P (Park) position before blocking the wheels and applying the parking brake, transmission damage could occur.
Do the following if the trailer begins to sway: 1. T ake your foot off the accelerator pedal to allow the vehicle to coast and steer as straight ahead as the road conditions allow . This combination will help stabilize the ve- hicle – Do not correct trailer sway by steering or applying the brakes.
When towing a trailer, final drive gear oil should be replaced and transmission oil/fluid should be changed more fre- quently. For additional information, see the “Maintenance and do-it-yourself” section earlier in this manual. FLAT TOWING T owing your vehicle with all four wheels on the ground is sometimes called flat towing.
DO T (Department of T ransportation) Quality Grades: All passenger car tires must conform to federal safety requirements in addition to these grades. Quality grades can be found where applicable on the tire sidewall between tread shoulder and maximum section width.
Y our NISSAN vehicle is covered by the following emission warranties: For USA 1. Emission Defects W arranty 2. Emissions Performance W arranty Details of this warranty may be found with other vehicle warranties in your W arranty Information Booklet which comes with your NISSAN vehicle.
WARNING Always drive the vehicle in a safe and prudent manner according to traffic con- ditions and obey all traffic laws. 1. Start the engine when the engine coolant temperature gauge needle points to C. Al- low the engine to idle until the gauge needle points between the C and H (normal oper- ating temperature) .
the type of personally identifying data routinely acquired during a crash investigation. T o read data recorded by an EDR, special equip- ment is required and access to the vehicle or the EDR is needed.
Insist on the use of genuine NISSAN collision parts! If you want your vehicle to be restored using parts made to NISSAN’s original exacting specifica- tions – if you want to help it to last and hold its resale value, the solution is simple. T ell your insurance agent and your repair shop to only use Genuine NISSAN Collision Parts.
MEMO 9-48 T echnical and consumer information.
10 Index 4WD warning light .............. .2-15 A Active brake limited slip (ABLS) system . . .5-33 Adjusting pedal position ........... .3-14 Air bag (See supplemental restraint system) .................... .1-47 Air bag system Front (See supplemental front impact air bag system) .
Precautions on child restraints ........ .1-27, 1-33, 1-37, 1-44 T op tether strap anchor point locations . .1-31 Child safety rear door lock ........... .3-7 Chimes, audible reminders .......... .2-20 Cleaning exterior and interior .......... .7-2 Clock .
F .M.V.S.S. certification label .......... .9-11 Fog light switch ................ .2-33 Front air bag system (See supplemental restraint system) ..... .1-54 Front seats .................... .1-2 Fuel Capacities and recommended fuel/lubricants .......
Light Air bag warning light ........ .1-62, 2-17 Brake light (See stop light) ........ .8-27 Bulb check/instrument panel ....... .2-13 Bulb replacement ............. .8-27 Charge warning light ........... .2-15 Fog light switch .............. .2-33 Headlight and turn signal switch .
Rear power windows ........... .2-49 Precautions Maintenance precautions .......... .8-5 On-pavement and off-road driving precautions ................. .5-3 Precautions on child restraints ........ .1-27, 1-33, 1-37, 1-44 Precautions on seat belt usage .
Steering P ower steering fluid ............ .8-11 P ower steering system .......... .5-31 Tilting steering wheel ........... .3-14 Steering wheel audio control switch ..... .4-54 Stop light .................... .8-27 Storage ..................... .2-39 Lockable bedside storage compartment .
V ehicle electronic system ............ .4-9 V ehicle identification .............. .9-10 V ehicle identification number (VIN) (Chassis number) ............... .9-10 V ehicle identification number (VIN) plate . . . .9-10 V ehicle loading information .
RECOMMENDED FUEL (without Flexible Fuel V ehicle [FFV] option ): Use unleaded regular gasoline with an octane rating of at least 87 AKI (Anti-Knock Index) num- ber (Research octane number 91) . CAUTION ● Only vehicles with the E-85 filler door label can operate on E-85.
2010 N I S S AN TIT AN 2010 TIT AN OWN E R'S MAN UAL A6 0-D Printing : August 2009 (15) Publication No.: OM0E-0A6 0U0 Printed in U .S.A. For y our s afety , read car efully and k eep in this v ehicle.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Nissan TITAN 2010 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Nissan TITAN 2010 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Nissan TITAN 2010, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Nissan TITAN 2010 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Nissan TITAN 2010, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Nissan TITAN 2010.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Nissan TITAN 2010. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Nissan TITAN 2010 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
