Manuel d'utilisation / d'entretien du produit DGN100Bv3 du fabricant NETGEAR
Aller à la page of 154
350 East Plumeria Drive San Jose, CA 95134 USA August 2013 202-1 1326-01 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 User Manual.
2 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 Support Thank you for selecting NETGEAR products. After installing your device, locate the serial number on the label of your product and use it to register your product at https://my .netgear .com . Y ou must register your product before you can use NETGEAR telephone support.
3 Contents Chapter 1 Hardware Setup Unpack Your Modem Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Hardware Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Front Panel .
4 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 Basic Wireless Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Wireless Settings Screen Fields . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Security Options: WPA-PSK, WPA2-PSK, and WPA-PSK + WPA2-PSK Mixed Mode .
5 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 Manage the Configuration File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 Back Up Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 Restore Configuration Settings .
6 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 Chapter 8 Troubleshooting Quick Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139 Sequence to Restart Your Network . . . . . . . . . . . . . . . . . .
7 1 1. Hardware Setup Get to know your modem router The NETGEAR® N150 Wireless ADSL2+ Modem Router DGN1000Bv3, going forward in this manual referred to as the modem router, provides an easy and secure way to set up a wireless home network with fast access to the Internet.
Hardware Setup 8 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 Unpack Y our Modem Router Y our box contains the items that are shown in the following figure. An installation guide and documentation CD are also included. In the unlikely event that any parts are incorrect, missing, or damaged, contact your NETGEAR dealer .
Hardware Setup 9 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 Hardware Features Before you cable your modem router, take a moment to become familiar with the front panel, back panel, and label.
Hardware Setup 10 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 The following table describes the buttons and LEDs on the front panel. T able 1. Front panel buttons and LEDs Button LED Description WPS Pressing the WPS button lets you use Wi-Fi Protected Setup (WPS) to join the network (see Wi-Fi Protected Setup Method on page 21).
Hardware Setup 11 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 Back Panel ADSL port Ethernet LAN ports On/Off button Power adapter input The back panel has the buttons and port connections as shown in the following figure.
Restore Factory Settings button Hardware Setup 12 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 Side Panel with Restore Factory Settings Button Y ou can return the modem router to its factory settings.
Hardware Setup 13 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 Bottom Panel WiFi network name MAC address Serial number Password The label on the bottom panel of the modem router shows the preset login information, MAC address, and serial number . Figure 5.
Hardware Setup 14 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 Plug-to-W AN Jack Adapter and ADSL Microfilters If this is the first time you have cabled a modem router between a DSL phone line and your computer or laptop, you might not be familiar with ADSL microfilters.
Hardware Setup 15 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 T wo-Line ADSL Microfilter Use an ADSL microfilter with a built-in splitter if you have a single wall outlet that provides connectivity for both the modem router and your telephone equipment.
16 2 2. Getting Started Connect to the modem router This chapter explains how to use NETGEAR genie® to set up your modem router after you complete cabling as described in the installation guide and in the previous chapter .
Getting Started 17 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 Modem Router Setup Preparation Y ou can set up your modem router with the NETGEAR genie automatically , or you can use the genie menus and screens to set up your modem router manually .
Getting Started 18 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 NETGEAR genie Setup NETGEAR genie runs on any device with a web browser . T o use NETGEAR genie to set up your modem router: 1. T urn on the modem router by pressing the On/Off button.
Getting Started 19 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 If the modem router does not connect to the Internet : 1. Review your settings to be sure that you have selected the correct options and typed everything correctly . 2. Contact your ISP to verify that you have the correct configuration information.
Getting Started 20 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 After the update, the modem router restarts. For more information, see Update the Modem Router Firmware on page 80. Dashboard (BASIC Home Screen) The modem router BASIC Home screen has a dashboard that lets you see the status of your Internet connection and network at a glance.
Getting Started 21 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 Join Y our W ireless Network Y ou can use the manual or the WPS method to join your wireless network. For instructions about how to set up a guest network, see Set Up a Guest Network on page 43.
Getting Started 22 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 NETGEAR genie App and Mobile genie App The genie app is the easy dashboard for managing, monitoring, and repairing your home network. See the NETGEAR genie App User Manual for details about the genie apps.
23 3 3. NETGEAR genie Basic Settings Y our Internet connection and WiFi network This chapter contains the following sections: • Internet Setup • xDSL Setup • Parental Controls • Basic Wireless.
NETGEAR genie Basic Settings 24 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 Internet Setup NETGEAR recommends that you use the Setup Wizard to detect the Internet connection and automatically set up the modem router (see Internet Connection Setup Wizard on page 47).
NETGEAR genie Basic Settings 25 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 The fields that display on the Internet Setup screen depend on whether your Internet connection requires a login.
NETGEAR genie Basic Settings 26 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 • Use Static IP Address . Enter the IP address, IP subnet mask, and the gateway IP address that your ISP assigned. The gateway is the ISP’ s modem router to which your modem router connects.
NETGEAR genie Basic Settings 27 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 Internet IP Address . • Get Dynamically from ISP . T -Online uses DHCP to assign your IP address. T -Online automatically assigns these addresses. • Use Static IP Address .
NETGEAR genie Basic Settings 28 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 Encapsulation is PPPoE and Y our ISP is Other These fields display only when you select PPPoE from the Encapsulation menu and the Other radio button. Figure 14. Internet Setup screen: fields that are specific to the Other selection • Login .
NETGEAR genie Basic Settings 29 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 Encapsulation is PPPoA These fields display only when you select PPPoA from the Encapsulation menu. Y ou cannot select an ISP radio button with the PPPoA selection. Figure 15.
NETGEAR genie Basic Settings 30 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 Internet Setup Screen Fields: Fields That Display Irrespective of Whether Login Is Required These fields display irrespective of whether your ISP requires a login: Domain Name Server (DNS) Address .
NETGEAR genie Basic Settings 31 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 Configure Regular Internet Service The modem router uses interface W AN1 for regular Internet service. T o configure the DLS setup for regular Internet service: 1. Select BASIC > xDSL Setup .
NETGEAR genie Basic Settings 32 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 The default setting is 38. 9. Depending on your configuration, either disable or configure and enable the VLAN: • If you do not use interface W AN2 for IPTV service, clear the Use VLANID check box.
NETGEAR genie Basic Settings 33 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 4. From the W AN menu, select W AN2 . Interface W AN2 is used for IPTV only . The screen adjusts. The Multiplexing Method menu becomes unavailable and the default VLAN ID changes to 8, but the Use VLANID check box remains cleared.
NETGEAR genie Basic Settings 34 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 Parental Controls The first time you select Parental Controls from the BASIC Home screen, your browser goes to the Live Parental Controls website. Y ou can learn more about Live Parental Controls or download the application.
NETGEAR genie Basic Settings 35 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 4. Click the Next button, read the note, and click the Next button again to proceed. Because Live Parental Controls uses free OpenDNS accounts, you are prompted to log in or create a free account.
NETGEAR genie Basic Settings 36 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 6. Select the radio button for the filtering level that you want and click the Next button. 7. Click the T ake me to the status screen button. Parental controls are now set up for the modem router.
NETGEAR genie Basic Settings 37 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 T o view or change basic wireless settings: 1. Select BASIC > Wireless . The screen sections, settings, and procedures are explained in the following sections. 2. Change the settings as needed.
NETGEAR genie Basic Settings 38 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 Wireless Settings Screen Fields Y ou can use this screen to view or change the wireless network settings and the security option.
NETGEAR genie Basic Settings 39 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 Security Options: WP A-PSK, WP A2-PSK, and WP A-PSK + WP A2-PSK Mixed Mode WP A encryption is built into all hardware that has the Wi-Fi-certified seal. This seal means that the product is authorized by the Wi-Fi Alliance ( http://www .
NETGEAR genie Basic Settings 40 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 The passphrase is a text string from 8 to 63 ASCII characters or exactly 64 hexadecimal digits. A hexadecimal digit is one of the following characters: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, C, D, E, and F (uppercase or lowercase).
NETGEAR genie Basic Settings 41 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 3. Select the WP A mode: • WP A [TKIP] • WP A2 [AES] • WP A [TKIP] + WP A2 [AES] 4. T ype the IP address of the RADIUS server . The address can be on your LAN or it can be an external address.
NETGEAR genie Basic Settings 42 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 3. From the Authentication T ype menu, select one of the following types: • Shared Key . Clients can use only shared key authentication. • Automatic . Client can use either open system or shared key authentication.
NETGEAR genie Basic Settings 43 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 Set Up a Guest Network Adding a guest network allows visitors at your home to use the Internet without using your wireless security key . Y ou can set up to three guest networks, all of which can be active at a same time.
NETGEAR genie Basic Settings 44 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 4. (Optional) Change the name of the guest network. The default names are NETGEAR-Guest1, NETGEAR-Guest2, and NETGEAR-Guest3. The guest network name is case-sensitive and can be up to 32 characters.
NETGEAR genie Basic Settings 45 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 • MAC Address . The unique MAC address for each device does not change. The MAC address is typically shown on the product label. • Device Name . If the device name is known, it is shown here.
46 4 4. NETGEAR genie ADV ANCED Home Specify custom settings This chapter contains the following sections: • NETGEAR genie ADV ANCED Home Screen • Internet Connection Setup Wizard • WAN Setup .
NETGEAR genie ADV ANCED Home 47 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 NETGEAR genie ADV ANCED Home Screen The genie ADV ANCED Home dashboard presents status information. The content is the same as what is on the Router Status screen available from the Administration menu.
NETGEAR genie ADV ANCED Home 48 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 T o use the Setup Wizard: 1. Select ADV ANCED > Setup Wizard . 2. From the Country menu, select your location. Note: If you have purchased the modem router in the US, you cannot change the country, and the selection is fixed at the US.
NETGEAR genie ADV ANCED Home 49 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 • Wireless Setup . This is a shortcut to the same Wireless Settings screen that you can access from the dashboard on the BASIC Home screen. For information, see Basic Wireless Settings on page 36.
NETGEAR genie ADV ANCED Home 50 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 • Default DMZ Server . This feature is sometimes helpful when you are playing online games or videoconferencing. Be careful when using this feature because it makes the firewall security less effective.
NETGEAR genie ADV ANCED Home 51 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 Default DMZ Server The default DMZ server feature is helpful when you are using some online games and videoconferencing applications that are incompatible with Network Address T ranslation (NA T).
NETGEAR genie ADV ANCED Home 52 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 These web-based applications might require an MTU change: - A secure website that does not open, or displays only part of a web page - Y ahoo email - MSN portal - America Online’ s DSL service • Y ou use VPN and have severe performance problems.
NETGEAR genie ADV ANCED Home 53 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 LAN Setup The LAN Setup screen allows configuration of LAN IP services such as Dynamic Host Configuration Protocol (DHCP) and Routing Information Protocol (RIP).
NETGEAR genie ADV ANCED Home 54 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 LAN Setup Screen Settings The following settings are available. Device Name By default, the device name is DGN1000Bv3, which is the modem router model. Y ou can change the device name to another name.
NETGEAR genie ADV ANCED Home 55 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 For more information, see Set Up Address Reservation on page 56. Specify DHCP Server Settings By default, the modem router functions as a DHCP server . The modem router assigns IP , DNS server , and default gateway addresses to all computers connected to the LAN.
NETGEAR genie ADV ANCED Home 56 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 T o disable the DHCP Server feature on the modem router: 1. Select ADV ANCED > LAN Setup . The LAN Setup screen displays. 2. Clear the Use Router as DHCP Server check box.
NETGEAR genie ADV ANCED Home 57 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 The reserved address is entered into the Address Reservation T able on the LAN Setup screen. The reserved address is not assigned until the next time the computer contacts the modem router’s DHCP server .
NETGEAR genie ADV ANCED Home 58 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 The following screen lets you select the method for adding the WPS client (a wireless device or computer). 3. Select the radio button for the setup method that you want to use, and follow the steps.
NETGEAR genie ADV ANCED Home 59 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 QoS Setup Quality of Service (QoS) is an advanced feature that can be used to prioritize some types of traffic ahead of others. The modem router can provide QoS prioritization over the wireless link and on the Internet connection.
NETGEAR genie ADV ANCED Home 60 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 Quality of Service Priority Rules and Internet Access Y ou can give prioritized Internet access to the following types of t.
NETGEAR genie ADV ANCED Home 61 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 2. Click the Setup QoS rule button. All preconfigured QoS rules are displayed in a table, along with their priority (Highest, High, Normal, or Low) and a description: 3. Select the radio button next to the QoS policy that you want to view or change.
NETGEAR genie ADV ANCED Home 62 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 Y our changes are saved in the table on the QoS Setup screen. T o delete a QoS rule: 1. Select ADV ANCED > Setup > QoS Setup . The QoS Setup screen displays. 2. Click the Setup QoS rule button.
NETGEAR genie ADV ANCED Home 63 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 The screen adjusts: • On-line gaming . The On-line gaming menu lets you select existing games, but scroll down to the bottom of the menu to select Add a new game . The screen adjusts: 5.
NETGEAR genie ADV ANCED Home 64 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 Create a QoS Rule for a Modem Router LAN Port T o create a QoS policy for a device connected to one of the modem router’ s LAN ports: 1. Select ADV ANCED > Setup > QoS Setup .
NETGEAR genie ADV ANCED Home 65 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 4. From the Priority Category menu, select MAC Address . The screen adjusts: 5.
NETGEAR genie ADV ANCED Home 66 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 5. Select the radio button next to the device that you want to change. 6. Change the MAC address, device name, or priority . 7. Click the Edit button. Note: You cannot edit a device that was detected by the modem router and automatically added to the MAC Device List.
NETGEAR genie ADV ANCED Home 67 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 Bandwidth Control Bandwidth control lets you set a limit to the bandwidth that is available for traffic from the modem router to the Internet. T o set the maximum uplink bandwidth: 1.
68 5 5. Security K eep un w ant ed con ten t ou t of y our ne t w or k This chapter explains how to use the basic firewall features of the modem router to prevent objectionable content from reaching the computers and devices on your network.
Security 69 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 Keyword Blocking of HTTP T raffic Use keyword blocking to prevent certain types of HTTP traffic from accessing your network. By default, keyword blocking is disabled. The blocking can be always or according to a schedule.
Security 70 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 6. Click the Apply button. Y our settings are saved. T o delete a keyword or domain: 1. Select ADV ANCED > Security > Block Sites . The Block Sites screen displays. 2. From the keyword list, select the keyword or domain that you want to remove.
Security 71 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 Y ou can add rules to further restrict the outbound communications or more widely open the inbound communications. Exceptions can be based on the service or application, source or destination IP addresses, and time of day .
Security 72 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 2. In the Outbound Services section, click the Add button. 3. Select the service or application to be covered by this rule. If the service or application that you want does not display in the menu, you can define it (see Add Custom Services to Allow or Block on page 74).
Security 73 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 • Single address . T ype the required address in the Start field. • Address range . T ype the start address for the range in the Start field and the end address for the range in the End field.
Security 74 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 3. Click the Delete button. The firewall rule is removed from the Outbound Services table on the Firewall Rules screen. Manage Inbound Firewall Rules By default, the firewall blocks all access from outside except responses to requests from the LAN side.
Security 75 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 2. In the Service T able section, click the Add Custom Service button. 3. In the Service T ype/User Defined field, type a suitable name for the new service or application.
Security 76 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 2. In the Service T able, select the radio button to the left of the service that you want to remove. 3. Click the Delete Service button. The custom service is removed from the Service T able on the Firewall Rules screen.
Security 77 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 5. Click the Apply button. Y our settings are saved. Security Event Email Notifications T o receive logs and alerts by email, provide your email information in the E-mail screen, and specify which alerts you want to receive and how often.
Security 78 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 7. (Optional) Select when logs are sent automatically: a. Select an option from the menu: • When log is full • Hourly • Daily • W eekly • None b. If you select Daily or W eekly , select the time from the menu, and select the a.
79 6 6. Administration Manage your network This chapter describes the modem router settings for administering and maintaining your modem router and home network.
Administration 80 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 Update the Modem Router Firmware The modem router firmware (routing software) is stored in flash memory .
Administration 81 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 T o download new firmware manually and update your modem router: 1. Visit downloadcenter .
Administration 82 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 V iew Router Status T o view modem router status and usage information: Depending on the screen that you have open, select ADV ANCED .
Administration 83 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 Router Information The following settings are displayed: • Hardware V ersion . The modem router model. • Firmware V ersion . The version of the modem router firmware. It changes if you update the modem router firmware.
Administration 84 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 Statistics Screen T o view statistics: 1. Depending on the screen that you have open, select ADV ANCED or ADV ANCED Home . 2. In the Internet Port pane, click the Show Statistics button.
Administration 85 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 2. In the Internet Port pane, click the Connection Status button. The following information displays: • Connection Time . The time elapsed since the last connection to the Internet through the DSL port.
Administration 86 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 T o view the modem statistics: Click the Modem Statistics button. The information that is displayed on this screen is not described in this manual. This information is typically used by NETGEAR support.
Administration 87 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 Wireless Settings The following settings are displayed: • Name (SSID ). The wireless network name (SSID) that the modem router uses. • Region . The geographic region where the modem router is being used.
Administration 88 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 Y ou can specify which types of actions and events are logged, and how the system logs are sent. By default, all actions and events are logged, and the system logs are not sent anywhere. T o view logs: Select ADV ANCED > Administration > Logs .
Administration 89 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 T o refresh the log screen: Click the Refresh button. T o clear the log entries: Click the Clear Log button.
Administration 90 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 Set Up How the System Logs Are Sent By default, no system logs (syslogs) are sent. Before you set up where the system logs are sent, set up when system logs are sent and enable email notification (see Security Event Email Notifications on page 77).
Administration 91 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 Restore Configuration Settings T o restore configuration settings that you backed up: 1. Select ADV ANCED > Administration > Backup Settings . The Backup Settings screen displays.
Administration 92 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 T o change the password for the user name admin: 1. Select ADV ANCED > Administration > Set Password . 2. T ype the old password, and type the new password twice. 3. (Optional) Specify a value in minutes to change the automatic logout time.
Administration 93 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 The screen adjusts: 3. From the lists, select two security questions, and provide answers to them. 4. Click the Apply button. Y our settings are saved. T o recover your password: 1. In the address field of your browser , type www .
Administration 94 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 T o perform diagnostic tests: 1. Select ADV ANCED > Administration > Diagnostics . 2. (Optional) Ping an IP address or host name: a. T ype an IP address or host name in the field.
Administration 95 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 T o reboot the modem router: 1. Select ADV ANCED > Administration > Diagnostics .
96 7 7. Advanced Settings Set up unique situations This chapter describes the advanced features of your modem router. Networking knowledge is needed to implement some of these features.
Advanced Settings 97 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 Advanced Wireless Settings Y ou can use this screen to turn the wireless radio on and off, to configure advanced wireless settings, to specify WPS settings, to use AP mode, and to set up a wireless access list.
Advanced Settings 98 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 wireless networks in your environments, you can clear the Enable 20/40 MHz Coexistence check box to increase the wireless speed to the maximum supported speed.
Advanced Settings 99 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 The screen adjusts: 3. Use the menus, radio buttons, and check boxes to set up a period during which you want the wireless signal to be turned off. The Start and End menus use 24-hour clock settings.
Advanced Settings 100 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 2. In the table, select the radio button next to the wireless Schedule that you want to remove. 3. Click the Delete button. The wireless schedule is removed from the table on the Advanced Wireless Settings screen.
Advanced Settings 101 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 3. (Optional) Under the Enable Router's PIN check box, type a number in the field. By default, the number is 3. This number specifies the number of times that a PIN connection is allowed to fail.
Advanced Settings 102 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 T o restrict access based on MAC addresses: 1. Select ADV ANCED > Advanced Setup > Wireless Settings . 2. Click the Set Up Access List button. 3. Click the Add button. 4. In the Device Name field, type a name for the wireless device.
Advanced Settings 103 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 3. Click the Edit button. The Edit Wireless Card screen displays. 4. Change the settings. 5. Click the Accept button. The changed settings are shown in the table on the Wireless Card Access List screen.
Advanced Settings 104 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 The modem router can function either as a base station or as a repeater: • Wireless base station . The modem router acts as the parent access point, bridging traf fic to and from the child repeater access point, as well as handling wireless and wired local computers.
Advanced Settings 105 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 3. Select the Wireless Base Station radio button. 4. (Optional) Select the Disable Wireless Client Association check box. Wireless clients are prevented from associating with the base station and LAN client associations only are allowed.
Advanced Settings 106 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 T o configure the modem router as a repeater: 1. Select ADV ANCED > Advanced Setup > Wireless Repeating Function . The Wireless Repeating Function screen displays. The wireless MAC address of the modem router is displayed onscreen.
Advanced Settings 107 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 Port Forwarding and Port T riggering By default, the modem router blocks inbound traffic from the Internet to your computers except replies to your outbound traffic.
Advanced Settings 108 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 Y our modem router then sends this request message through the Internet to the web server at www .example.com. 4. The web server at www .example.com composes a return message with the requested web page data.
Advanced Settings 109 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 stores the original information, performs Network Address T ranslation (NA T) on the source address and port, and sends this request message through the Internet to the IRC server . 4.
Advanced Settings 11 0 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 The following sequence shows the effects of the port forwarding rule you have defined: 1. The user of a remote computer opens a browser and requests a web page from www .example.com, which resolves to the public IP address of your modem router.
Advanced Settings 111 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 Set Up Port Forwarding to Local Servers The port forwarding feature lets you allow certain types of incoming traffic to reach servers on your local network. For example, you might want to make a local web server , FTP server , or game server visible and available to the Internet.
Advanced Settings 11 2 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 Manage Custom Services for Port Forwarding Before you define a service, game, or application that does not display in the Service Name menu on the Port Forwarding / Port T riggering screen, first determine which port number or range of numbers the application uses.
Advanced Settings 11 3 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 8. Specify the internal ports by one of these methods: • Leave the Use the same port range for Internal port check box selected.
Advanced Settings 11 4 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 Application Example: Make a Local W eb Server Public If you host a web server on your local network, you can use port forwarding to allow web requests from anyone on the Internet to reach your web server .
Advanced Settings 11 5 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 Manage Port T riggering By default, port triggering is enabled with a time-out period of 20 minutes. The time-out value controls the inactivity timer for the designated inbound ports.
Advanced Settings 11 6 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 Manage Port T riggering Services T o configure port triggering services, you must know which inbound ports the application needs, and the number of the outbound port that will trigger the opening of the inbound ports.
Advanced Settings 11 7 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 Note: If you are not sure which protocol to select, select TCP/UDP . 9. In the Starting Port field, enter the starting port number for the inbound connection. 10. In the Ending Port field, enter the ending port number for the inbound connection.
Advanced Settings 11 8 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 The service is removed from the Port T riggering Portmap T able on the Port Forwarding / Port T riggering screen.
Advanced Settings 11 9 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 This is the name that you use to log in to your account, not your host name. 7. In the Password field, type the password or key for your Dynamic DNS account. 8. Click the Apply button.
Advanced Settings 120 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 2. Click the Add button. 3. In the Route Name field, type a name for this static route. This name is for identification purposes only . 4. (Optional) T o limit access to the LAN only , select the Private check box.
Advanced Settings 121 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 T o remove a static route: 1. Select ADV ANCED > Advanced Setup > Static Routes . The Static Routes screen displays. 2. In the table, select the radio button to the left of the route that you want to remove.
Advanced Settings 122 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 • For a range of IP addresses on the Internet: a. Select IP Address Range radio button. b. In the From fields, enter the start IP address of the range from which access is allowed. c.
Advanced Settings 123 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 By default, this check box is selected. Y ou can disable UPnP for automatic device configuration. If you clear the T urn UPnP On check box, the modem router does not allow any device to automatically control the resources, such as port forwarding (mapping), of the modem router.
Advanced Settings 124 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 • If your ISP did not provide details, you can select 6to4 T unnel . • If you are not sure what type of IPv6 connection the modem router uses, select Auto Detect so that the modem router detects the IPv6 type that is in use.
Advanced Settings 125 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 The screen adjusts: The modem router automatically detects the information in the following fields: • Connection T ype . This field indicates the connection type that is detected. • Router ’ s IPv6 Address on W AN .
Advanced Settings 126 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 5. Specify the IPv6 filtering mode by selecting one of the following radio buttons: • Secured . In the secured mode, which is the default mode, the modem router inspects both TCP and UDP packets.
Advanced Settings 127 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 3. (Optional) In the DHCP User Class (If Required) field, enter a host name. If your ISP has given you a specific host name, enter it here. Otherwise, leave this field blank. 4. (Optional) In the DHCP Domain Name (If Required) field, enter a domain name.
Advanced Settings 128 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 The screen adjusts: The modem router automatically detects the information in the following field: • Router ’ s IPv6 Address on LAN1 . This field shows the IPv6 address that is acquired for the modem router’s LAN interface.
Advanced Settings 129 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 6. Specify the IPv6 filtering mode by selecting one of the following radio buttons: • Secured . In the secured mode, which is the default mode, the modem router inspects both TCP and UDP packets.
Advanced Settings 130 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 The screen adjusts: 3. Configure the fixed IPv6 addresses for the W AN connection: • IPv6 Address/Prefix Length . The IPv6 address and prefix length of the modem router W AN interface.
Advanced Settings 131 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 If you do not specify an ID here, the modem router generates the address and prefix length automatically from its MAC address. 6. Specify the IPv6 filtering mode by selecting one of the following radio buttons: • Secured .
Advanced Settings 132 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 the prefix, which is also indicated by the underline (_) under the IPv6 address. If no address is acquired, the field displays Not Available. 3. (Optional) In the User Class (If Required) field, enter a host name.
Advanced Settings 133 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 The screen adjusts: The modem router automatically detects the information in the following fields: • Router ’ s IPv6 Address on W AN . This field shows the IPv6 address that is acquired for the modem router’s W AN (or Internet) interface.
Advanced Settings 134 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 Note: The default setting of the Connection Mode field is Always On to provide a steady IPv6 connection.
Advanced Settings 135 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 T o monitor Internet traffic: 1. Click ADV ANCED > Advanced Setup > T raffic Meter . 2. Select the Enable T raffic Meter check box. By default, there is no traffic limit and the traf fic volume is not controlled.
Advanced Settings 136 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 T o display more information about the data traffic on your modem router and to change the poll interval: Click the T raffic Status button. Restricting Internet T raffic by V olume Y ou can record and restrict the traffic by volume in MB.
Advanced Settings 137 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 Restricting Internet T raffic by Connection Time Y ou can record and restrict the traffic in connection time. This is useful when your ISP measures your connection time. T o record and restrict the volume of Internet traffic by volume: 1.
138 8 8. T roubleshooting Get help with problems This chapter provides information to help you diagnose and solve problems you might have with your modem router. If you do not find the solution here, check the NETGEAR support site at http://support.netgear .
T roubleshooting 139 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 Quick T ips This section describes tips for troubleshooting some common problems. Sequence to Restart Y our Network If you need to restart your network, follow this sequence: 1. T urn off and unplug the modem router.
T roubleshooting 140 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 T roubleshoot with the LEDs When you turn on the power , the Power , LAN, and DSL LEDs light as described here. If they do not, refer to the sections that follow for help. 1. When power is first applied, the Power LED lights solid red.
T roubleshooting 141 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 Power LED Is Blinking If the Power LED blinks slowly and continuously , the firmware of the modem router is corrupted. This can occur if a firmware update is interrupted, or if the modem router detects a problem with the firmware.
T roubleshooting 142 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 • If your modem router’s IP address was changed and you do not know the current IP address, clear the modem router’s configuration to factory defaults. This sets the modem router’s IP address to 192.
T roubleshooting 143 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 Internet LED Is Red If the Internet LED is red, the device was unable to connect to the Internet. V erify the following: • Check that your login credentials are correct, or that the information you entered on the Internet Setup screen is correct.
T roubleshooting 144 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 T roubleshoot PPPoE or PPPoA T o verify if your PPPoE or PPPoA connection is working: 1. Select ADV ANCED > Administration > Router Status . The Router Status screen displays.
T roubleshooting 145 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 router, reboot your computer , and verify the DNS address. Alternatively , you can configure your computer manually with DNS addresses, as explained in your operating system documentation .
T roubleshooting 146 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 Incorrect Date or T ime The modem router uses the Network T ime Protocol (NTP) to obtain the current time from one of several network time servers on the Internet. Each entry in the log is stamped with the date and time of day .
T roubleshooting 147 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 If the path is not working, you see this message: Request timed out If the path is not functioning correctly , you might have one of t.
148 A A. Supplemental Information V iew the factory settings and specifications This appendix includes the factory default settings and technical specifications for the modem router.
Supplemental Information 149 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 Factory Settings Y ou can return the modem router to its factory settings. On the right side panel of the modem router, use the end of a paper clip or some other similar object to press and hold the Restore Factory Settings button for at least seven seconds.
Supplemental Information 150 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 Wireless Wireless communication Enabled SSID name See the label on the modem router.
Supplemental Information 151 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 T echnical and Physical Specifications T able 4. T echnical and physical specifications Specification Description Network prot.
152 B B. Notification of Compliance NETGEAR wireless routers, gateways, APs Regulatory Compliance Information This section includes user requirements for operating this product in accordance with National laws for usage of radio spectrum and operation of radio devices.
Notification of Compliance 153 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 FCC Radio Frequency Interference W arnings & Instructions This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Notification of Compliance 154 N150 Wireless ADSL2+ Modem Router DGN1000Bv3 IMPORT ANT NOTE: Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body .
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté NETGEAR DGN100Bv3 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du NETGEAR DGN100Bv3 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation NETGEAR DGN100Bv3, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le NETGEAR DGN100Bv3 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le NETGEAR DGN100Bv3, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du NETGEAR DGN100Bv3.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le NETGEAR DGN100Bv3. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei NETGEAR DGN100Bv3 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
