Manuel d'utilisation / d'entretien du produit NP2150 du fabricant NEC
Aller à la page of 44
1 2 4 5 6 7 1. What Y ou Can Do with User Supportware 5 2. Operating Environment 4. Setting the LAN Setting of Projector 5. Setting the LAN Setting of Personal Computer ([Example] Wireless LAN of Windows Vista : Ad Hoc connection) 6. Setting the LAN Setting of Personal Computer ([Example] Wireless LAN of Windows XP:Ad Hoc connection) 7.
Introduction Thank you for purchasing the NEC projector NP3150/NP2150/NP1 150 (hereafter referred to as the “projector”). The projector is equipped with the following features so that you can give ef fective presentations.
3 Important Information USB Wireless LAN Unit FCC Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.
4 To comply with FCC RF exposure compliance requirements, the antenna used for this transmitter must be installed to provide a separation distance of at least 7.87"/20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter .
5 Important Information • Improper intrusions Malicious third parties may without permission access the personal or company network and steal personal or confidential information, pretend to be some.
6 Specifications For United States, Canada, and Mexico Product Name Operating V oltage Max Amps Wireless Standard Modulation Method LED Display (Blue) IEEE802.1 1a IEEE802.1 1b IEEE802.1 1g Interface Dimensions Weight Environmental Considerations NP01LM3 5V (power supplied from the projector) Tx: 472 mA (Max) Rx: 300 mA (Max) IEEE802.
7 For other countries except United States, Canada and Mexico Product Name Operating V oltage Max Amps Wireless Standard Modulation Method LED Display (Blue) IEEE802.1 1a IEEE802.1 1b IEEE802.1 1g Interface Dimensions Weight Environmental Considerations NP01LM2 5V (power supplied from the projector) Tx: 472 mA (Max) Rx: 300 mA (Max) IEEE802.
8 Contents Contents Introduction ................................................................................ Inside cover Important Information ................................................................................... 3 Specifications .
9 1. What Y ou Can Do with User Supportware 5 1-1. Image Express Utility 2.0 Image Express Utility 2.0 is a software tool used to send the screen of your personal computer to the projector via a network, without the signal cables.
10 ● Projected images can be transferred and saved to personal computers. When “Meeting Mode” is used, projected images can be sent to the personal computers of all the participants (attendants) of a “Meeting”. The received images can be saved to your personal computer with a memo (text data) attached.
11 1-2. Desktop Control Utility 1.0 Desktop Control Utility 1.0 is software that operates the desktop screen of a personal computer at a remote location from the projector by using a network. ● A commercially available USB mouse is connected to the projector to operate the personal computer .
12 1-3. Ulead Photo Explorer 8.0 SE Basic Ulead Photo Explorer 8.0 SE Basic (hereafter referred to as “Ulead Photo Explorer 8.0”) is a multimedia image file management tool developed by Ulead Systems, Inc.
13 1-4. V iewer PPT Converter 3.0 V iewer PPT Converter 3.0 is software that converts files created with PowerPoint 95/97/ 2000/ 2002/2003/2007 into an index file that can be displayed with the viewer function of the projector . ● When converting, specify a USB memory device as the destination to which the index file is to be saved.
14 2. Operating Environment 2-1. Supported Projector User Supportware 5 supports the following NEC projector (as of August 2007) NP3150/NP2150/NP1 150 NP Series Reference Some of software can be used with projectors other than the above projectors. For details, refer to the help function of each software.
15 2-3. Operating Environment The following is the operating environment for Image Express Utility 2.0. For the operating environment of other software, please refer to the help function of each software.
16 3. Connecting LAN Cable Connect a LAN cable to the LAN port (RJ-45) of the projector when connecting the projector to wired LAN. After connecting LAN cable to the projector , set the required settings for the projector ( next page). WIRELESS USB(LAN) WIRELESS LAN Server HUB, etc.
17 4. Setting the LAN Setting of Projector Reference For how to turn on/off the power to the projector and how to operate the buttons and remote control of the projector , refer to “User ’s Manual” included in the User’s Manual CD-ROM.
18 4 Press the button to highlight the “INST ALLA TION” tab. 5 Press the SELECT button to highlight “NETWORK SETTINGS”, and press the button. The “NETWORK SETTINGS” screen will be displayed. • To make setting of wireless LAN Proceed to “4-2.
19 4-2. Wireless LAN When connecting the wireless LAN, configure the LAN settings in the “WIRELESS” page of “NETWORK SETTINGS” selected from On-Screen Menu. ■ Flow of Setting Setting of "CONNECTION". Select SSID in "SITE SURVEY".
20 ■ Setting Wireless LAN 1 Display the “ WIRELESS” page of “NETWORK SETTINGS”. Configure the setting of wireless LAN in the “WIRELESS” page of “ NETWORK SETTINGS” selected from On-Screen Menu.
21 3 Set “DHCP”. Check this check box if the network to which the projector is to be connected automatically assigns the IP address via the DHCP server . <1> Press the SELECT button once to highlight the “DHCP” check box and press the button.
22 5 Input “SUBNET MASK”. If “DHCP” is not checked, input the subnet mask of the network to which the projector is connected. The method of inputting is the same as that of the “IP ADDRESS” field. 6 Input “GA TEW A Y”. If “DHCP” is not checked, input the default gateway of the network to which the projector is connected.
23 9 Select SSID from “SITE SURVEY ” (if necessary). A list of SSID that can be connected to wireless LAN in this place are displayed, and the SSID that are to be connected are selected from this list. When SSID is selected from the list, the “SSID” field, “TYPE” field and “CHANNEL” field will also be automatically set.
24 11 Select “NETWORK TYPE” (if necessary). The communication mode of the SSID selected in “SITE SURVEY” are automatically selected. The settings can be changed by moving the highlight to the “NETWORK TYPE” field and pressing the button. • “ INFRASTRUCTURE” .
25 13 Select “SECURITY” page (if necessary). Proceed to step 17 if SECURITY is not set. <1> Use the SELECT / button to select the “CONNECTION” tab, and press the button to highlight the “SECURITY” tab. The “SECURITY” page will be displayed.
26 16 Input “KEY 1” to “KEY 4” (only when WEP is selected). If “WEP (64BIT)” or “WEP (128BIT)” is selected from “SECURITY TYPE”, input an encryption key . Set the same encryption key as the wireless access point and personal computer to be connected by the wireless LAN.
27 17 Finalize “ADV ANCED”. <1> Use the SELECT / button to highlight [OK] and press the button. The “WIRELESS” page will be displayed again. 18 Reconnect the network. <1> Use the SELECT / button to highlight “RECONNECT” and press the button.
28 4-3. Wired LAN When connecting a LAN cable to the LAN port of the projector , configure the LAN settings in the “WIRED” page of “NETWORK SETTINGS” selected from On-Screen Menu. ■ Flow of setting 1 3 Step Display "WIRED" page of "NETWORK SETTINGS".
29 ■ Setting Wired LAN 1 Display the “WIRED” page of “NETWORK SETTINGS”. Configure the setting of wired LAN in the “WIRED” page of “ NETWORK SETTINGS” selected from On-Screen Menu. If “ NETWORK SETTINGS” is not displayed, refer to “4-1.
30 5. Setting the LAN Setting of Personal Computer ([Example] Wireless LAN of Windows V ista: Ad Hoc connection) This section explains the procedure for Ad Hoc connection of wireless LAN between the personal computer and projector , by using the wireless network setting function with Windows Vista Ultimate.
31 5. Setting the LAN Setting of Personal Computer ([Example] Wireless LAN of Windows Vista: Ad Hoc connection) 5 ([Example] Wireless LAN of Windows Vista: Ad Hoc connection) If you are not connected to a network, the following window will be displayed.
32 5. Setting the LAN Setting of Personal Computer ([Example] Wireless LAN of Windows Vista: Ad Hoc connection) 7 When the screen shows “Successfully connected to NECPJ”, check “ M Save this network” and click [Close]. “Set Network Location” window will be displayed.
33 5. Setting the LAN Setting of Personal Computer ([Example] Wireless LAN of Windows Vista: Ad Hoc connection) 13 Click [Use the following IP address], and input [IP address] and [Subnet mask].
34 6. Setting the LAN Setting of Personal Computer ([Example] Wireless LAN of Windows XP: Ad Hoc connection) This section explains the procedure for Ad Hoc connection of wireless LAN between the personal computer and projector , by using the wireless network setting function with Windows XP Service Pack 2 (SP2).
35 3 Right-click the [Wireless Network Connection] icon and click [Property]. 3 -2 3 -1 Right-click Click A property window for wireless network connections will be displayed. 4 From the list of [This connection uses the following Items:], select (click) [Internet Protocol (TCP/IP)] and click [Properties].
36 5 Click [Use the following IP address:], and input [IP address]and[Subnet mask]. • If, for example, the [IP address] and [Subnet mask] of the projector are set as show in “Example of settings for projector” on page 34, set the personal computer as shown below .
37 9 Right-click the [Wireless Network Connection] icon and click [V iew A vailable Wireless Networks]. 9 -1 Right-click 9 -2 Click The “Wireless Network Connection” window is displayed. 10 From the list, select SSID of the projector to be connected and click [Connect].
38 11 Input WEP key to set up an encryption key and click [Connect]. • Input an encryption key of “WEP”. Enter “NECDS” in the Network key box, for example, if you have the WEP setting on the projector side configured with “64bit” and have “NECDS” input as Key 1.
39 7. Refer to “User ’ s Guide” and Help Each software program in User Supportware 5 contains each help file that explains the functions and operation methods in detail. Also, “User ’s Guide” (PDF) explains the basic operation procedure of each software program carefully .
40 Reference If the above menu is not displayed, follow these steps. (*Example when Windows Vista is used) 1. Click [Start] of Windows. 2. Click [All programs] → [Accessories] → [Run]. 3. In the [Open:] field, enter the CD-ROM drive name *1 (e.g., “Q:”) followed by “SETUP .
41 7-2. Using Help The functions and operation of each software are described on the Help screen. This section introduces how to display and use the Help screen.
42 ■ Displaying Ulead Photo Explorer 8.0 Help To display the Help of Ulead Photo Explorer 8.0, start the software and make your selection from the [Help] menu. 1 Click [All Programs] in the start menu → [Ulead Photo Explorer 8.0 SE Basic] → [Ulead Photo Explore 8.
• IBM and PC/A T are registered trademarks of International Business Machines Corporation. • Intel,Pentium and MMX are trademarks of Intel Corporation in the United States and other countries. • Microsoft,Windows,Windows Vista,PowerPoint,MS,MS-DOS,and DirectX are registered trademarks or trademarks of Microsoft Corporation in the U.
NEC Pr ojector User Supportwar e 5 ■ Image Express Utility 2.0 ■ Desktop Control Utility 1.0 ■ Ulead Photo Explorer 8.0 SE Basic ■ V iewer PPT Converter 3.0 ■ PC Control Utility 3.0 NP3150 / NP2150 / NP1 150 Wired and W ireless Network Setup Guide 7N8P8092 NP3150NWSETUP-02.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté NEC NP2150 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du NEC NP2150 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation NEC NP2150, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le NEC NP2150 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le NEC NP2150, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du NEC NP2150.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le NEC NP2150. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei NEC NP2150 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
