Manuel d'utilisation / d'entretien du produit NP1000 du fabricant NEC
Aller à la page of 40
1 2 4 5 6 7 1. What Y ou Can Do with User Supportware 3 2. Operating Environment 4. Attaching LAN Card 5. Setting the LAN Setting of Projector 6. Setting the LAN Setting of Personal Computer ([Example] Wireless LAN of Windows XP:Ad Hoc connection) 7.
Introduction Thank you for purchasing the NEC projector NP2000/NP1000 (hereafter referred to as the “ projector ” ). The projector is equipped with the following features so that you can give ef fective presentations.
1 Cautions on Usage • A wireless LAN card is not meant for use with facilities or equipment involving the safeguard of human life, such as medical equipment, nuclear facilities or equipment, aeronautical or space equipment, transportation facilities or equipment, etc.
2 Contents Contents Introduction ................................................................................ Inside cover Cautions on Usage ........................................................................................ 1 Contents ......
3 1. What Y ou Can Do with User Supportware 3 What Y ou Can Do with User Supportware 3 1 1. What Y ou Can Do with User Supportware 3 1-1. Image Express Utility 2.0 Image Express Utility 2.0 is a software tool used to send the screen of your personal computer to the projector via a network, without the signal cables.
4 1. What Y ou Can Do with User Supportware 3 ● Projected images can be transferred and saved to personal computers. When “ Meeting Mode ” is used, projected images can be sent to the personal computers of all the participants (attendants) of a “ Meeting ” .
5 1. What Y ou Can Do with User Supportware 3 What Y ou Can Do with User Supportware 3 1 1-2. Desktop Control Utility 1.0 Desktop Control Utility 1.0 is software that operates the desktop screen of a personal computer at a remote location from the projector by using a network.
6 1. What Y ou Can Do with User Supportware 3 1-3. Ulead Photo Explorer 8.0 SE Basic Ulead Photo Explorer 8.0 SE Basic (hereafter referred to as “ Ulead Photo Explorer 8.0 ” ) is a multimedia image file management tool developed by Ulead Systems, Inc.
7 1. What Y ou Can Do with User Supportware 3 What Y ou Can Do with User Supportware 3 1 1-4. V iewer PPT Converter 3.0 Viewer PPT Converter 3.0 is software that converts files created with PowerPoint 95/97/ 2000/ 2002/2003 into an index file that can be displayed with the viewer function of the projector .
8 2. Operating Environment 2. Operating Environment 2-1. Supported Projector User Supportware 3 supports the following NEC projector (as of February 2006) NP2000/NP1000 L T380/L T280 NP Series L T Series Reference Some of software can be used with projectors other than the above projectors.
9 2 2. Operating Environment Operating Environment 2-2. Operating Environment The following is the operating environment for Image Express Utility 2.0. For the operating environment of other software, please refer to the help function of each software.
10 3. Connecting LAN Cable 3. Connecting LAN Cable Connect a LAN cable to the LAN port (RJ-45) of the projector when connecting the projector to wired LAN. After connecting LAN cable to the projector , set the required settings for the projector ( page 24).
11 4. Attaching Wireless LAN Card Attaching Wireless LAN Card 4 4. Attaching Wireless LAN Card Insert the wireless LAN card into the PC card slot on the rear panel of the projector . Important • The wireless LAN card must be inserted into the PC card slot in the correct direction.
12 4. Attaching Wireless LAN Card ■ Removing card from PC card slot 1 Press POWER ON/STAND BY button to set the projector to Stand-by mode, press the “ O (off) ” side of the main power switch of the projector . 2 Slowly press the PC card eject button.
13 Setting the LAN Setting of Projector 5. Setting the LAN Setting of Projector 5 5. Setting the LAN Setting of Projector Reference For how to turn on/off the power to the projector and how to operate the buttons and remote control of the projector , refer to “ User ’ s Manual ” included in the User ’ s Manual CD-ROM.
14 5. Setting the LAN Setting of Projector 4 Press the button three times to highlight the “ Installation ” tab. 5 Press the SELECT button three times to highlight “ LAN Mode ” , and press the button. The “ LAN Mode ” screen will be displayed.
15 Setting the LAN Setting of Projector 5. Setting the LAN Setting of Projector 5 5-2. Wireless LAN When inserting the wireless LAN card into the PC card slot of the projector , configure the LAN settings in the “ PC Card ” page of “ LAN Mode ” selected from On-Screen Menu.
16 5. Setting the LAN Setting of Projector ■ Setting Wireless LAN 1 Display the “ PC Card ” page of “ LAN Mode ” . Configure the setting of wireless LAN in the "PC Card ” page of “ LAN Mode ” selected from On-Screen Menu.
17 Setting the LAN Setting of Projector 5. Setting the LAN Setting of Projector 5 3 Set “ DHCP ” . Check this check box if the network to which the projector is to be connected automatically assigns the IP address via the DHCP server . <1> Press the SELECT button once to highlight the “ DHCP ” check box and press the button.
18 5. Setting the LAN Setting of Projector 5 Input “ Subnet Mask ” . If “ DHCP ” is not checked, input the subnet mask of the network to which the projector is connected. The method of inputting is the same as that of the “ IP Address ” field.
19 Setting the LAN Setting of Projector 5. Setting the LAN Setting of Projector 5 9 Select SSID from “ Site Survey ” (if necessary). A list of SSID that can be connected to wireless LAN in this place are displayed, and the SSID that are to be connected are selected from this list.
20 5. Setting the LAN Setting of Projector 11 Select “ Mode ” (if necessary). The communication mode of the SSID selected in “ Site Survey ” are automatically selected. The settings can be changed by moving the highlight to the “ Mode ” field and pressing the button.
21 Setting the LAN Setting of Projector 5. Setting the LAN Setting of Projector 5 13 Select “ WEP ” page (if necessary). Proceed to step 17 if WEP is not set. <1> Use the SELECT / button to select the “ Network T ype ” tab, and press the button to highlight the “ WEP ” tab.
22 5. Setting the LAN Setting of Projector 16 Input “ Key 1 ” to “ Key 4 ” . If “ 64 bit ” , “ 128 bit ” , or “ 152 bit ” is selected from “ WEP ” , input an encryption key . Set the same encryption key as the access point and personal computer to be connected by the wireless LAN.
23 Setting the LAN Setting of Projector 5. Setting the LAN Setting of Projector 5 17 Finalize “ Advanced ” . <1> Use the SELECT / button to highlight [OK] and press the button. The “ PC card ” page will be displayed again. 18 Reconnect the network.
24 5. Setting the LAN Setting of Projector 5-3. Wired LAN When connecting a LAN cable to the LAN port of the projector , configure the LAN settings in the “ Built-in ” page of “ LAN Mode ” selected from On-Screen Menu. ■ Flow of setting 1 3 Step Display "Built-in" page of "LAN Mode".
25 Setting the LAN Setting of Projector 5. Setting the LAN Setting of Projector 5 ■ Setting Wired LAN 1 Display the “ Built-in ” page of “ LAN Mode ” . Configure the setting of wired LAN in the “ Built-in ” page of “ LAN Mode ” selected from On-Screen Menu.
26 6. Setting the LAN Setting of Personal Computer 6. Setting the LAN Setting of Personal Computer ([Example] Wireless LAN of Windows XP: Ad Hoc connection) This section explains the procedure for Ad .
27 Setting the LAN Setting of Personal Computer 6. Setting the LAN Setting of Personal Computer 6 3 Right-click the [Wireless Network Connection] icon and click [Property]. 3 -2 3 -1 Right-click Click A property window for wireless network connections will be displayed.
28 6. Setting the LAN Setting of Personal Computer 5 Click [Use the following IP address:], and input [IP address]and[Subnet mask]. • If, for example, the [IP address] and [Subnet mask] of the projector are set as show in “ Example of settings for projector ” on page 26, set the personal computer as shown below .
29 Setting the LAN Setting of Personal Computer 6. Setting the LAN Setting of Personal Computer 6 9 Right-click the [Wireless Network Connection] icon and click [V iew A vailable Wireless Networks]. 9 -1 Right-click 9 -2 Click The “ Wireless Network Connection ” window is displayed.
30 6. Setting the LAN Setting of Personal Computer 11 Input WEP key to set up an encryption key and click [Connect]. • Input an encrypiton key of “ WEP ” . Enter “ NECVT ” in the Network key box, for example, if you have the WEP setting on the projector side configured with “ 64bit ” and have “ NECVT ” input as Key 1.
31 Refer to “ User ’ s Guide ” and Help 7. Refer to “ User ’ s Guide ” and Help 7 7. Refer to “ User ’ s Guide ” and Help Each software program in User Supportware 3 contains each help file that explains the functions and operation methods in detail.
32 7. Refer to “ User ’ s Guide ” and Help Reference If the above menu is not displayed, follow these steps. 1. Click [Start] of Windows. 2. Click [Run...]. 3. In the [Open:] field, enter the CD-ROM drive name *1 (e.g., “ Q: ” ) followed by “ SETUP .
33 Refer to “ User ’ s Guide ” and Help 7. Refer to “ User ’ s Guide ” and Help 7 7-2. Using Help The functions and operation of each software are described on the Help screen. This section introduces how to display and use the Help screen.
34 7. Refer to “ User ’ s Guide ” and Help 34 ■ Displaying Ulead Photo Explorer 8.0 Help T o display the Help of Ulead Photo Explorer 8.0, start the software and make your selection from the [Help] menu. 1 Click [All Programs] in the start menu → [Ulead Photo Explorer 8.
35 MEMO.
36 MEMO.
• IBM and PC/A T are registered trademarks of International Business Machines Corporation. • Microsoft, Windows, PowerPoint, MS, MS-DOS, and DirectX are registered trademarks or trademarks of Microsoft Corporation in the U.S. or other countries. • Ulead Systems and Photo Explorer are registered trademarks of Ulead Systems, Inc.
NEC Pr ojector User Supportwar e 3 ■ Image Express Utility 2.0 ■ Desktop Control Utility 1.0 ■ Ulead Photo Explorer 8.0 SE Basic ■ Viewer PPT Converter 3.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté NEC NP1000 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du NEC NP1000 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation NEC NP1000, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le NEC NP1000 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le NEC NP1000, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du NEC NP1000.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le NEC NP1000. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei NEC NP1000 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
