Manuel d'utilisation / d'entretien du produit MultiSync E232WMT du fabricant NEC
Aller à la page of 19
MultiSync E232WMT User’s Manual.
Index W arning, Caution ........................................................................................................................................... English-1 Registration Information ....................................................
English English-1 TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPT ACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULL Y INSER TED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOL T AGE COMPONENTS INSIDE.
English-2 Registration Information FCC Information 1. Use the attached specied cables with the MultiSync E232WMT (L233QV) monitor so as not to interfere with radio and television reception. (1) The power supply cord you use must have been approved by and comply with the safety standards of U.
English English-3 Recommended use Safety Precautions and Maintenance FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE LCD COLOR MONIT OR: • DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks.
English-4 CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CAN REDUCE EYE, SHOULDER AND NECK F A TIGUE. CHECK THE FOLLOWING WHEN YOU POSITION THE MONITOR: • For optimum performance, allow 20 minutes for the display to warm up. • Adjust the monitor height so that the top of the screen is at or slightly below eye level.
English English-5 Contents Y our new NEC monitor box* should contain the following: • MultiSync monitor with tilt/height adjust stand • Power Cord* 1 • Video Signal Cable (DVI-D to DVI-D cable)* 2 • Video Signal Cable (Mini D-SUB 15 pin to Mini D-SUB 15 pin) • USB Cable* 3 • Audio Cable (ø 3.
English-6 Quick Start T o connect the LCD monitor to your system, follow these instructions: NOTE: Make sure to read “Recommended use” (page 3) before installation. 1. Turn of f the power of your computer . 2. For a PC with DVI digital output: Connect the DVI signal cable to the connector of the display card in your system ( Figure A.
English English-7 3. Place hands on each side of the monitor to tilt the LCD panel and lift up to the highest position. NOTE: Handle with care when tilting the monitor screen.
English-8 UP DOWN AUTO MENU POWER Figure E.1 LED Indicates that the power is on or off. LED The white light is lit up while the camera is in operation. Microphone Microphone Camera Raise and Lower Monitor Screen T o raise or lower screen, place a hand on each side of the monitor and lift or lower to the desired height ( Figure RL.
English English-9 Remove Monitor Stand for Mounting T o prepare the monitor for alternate mounting purposes: 1. Disconnect all cables. 2. Place a hand on each side of the monitor and lift up to the highest position. 3. Place monitor face down on a non-abrasive surface ( Figure S.
English-10 Controls OSD (On-Screen Display) control keys on the side of the monitor function are as follows: T o access OSD menu, press the MENU key . T o change signal input, press the AUTO/EXIT key .
English English-1 1 BRIGHTNESS / CONTRAST Contrast (Only when Eco Mode Off) Adjusts the overall image and background screen brightness by input signal level. Brightness (Only when Eco Mode Off) Adjusts the overall image and background screen brightness.
English-12 OSD Setup Timeout Y ou can select how long the monitor waits after the last touch of a key to shut of f the OSD menu. Language Selects the language used by the OSD. Extra Input Select Changes the video input source. Reset Allows you to reset all OSD control settings back to the factory settings.
English English-13 Specications Monitor Specications MultiSync E232WMT Notes LCD Module Diagonal: Viewable Image Size: Native Resolution (Pixel Count): 58.42 cm/23.0 inches 58.42 cm/23.0 inches 1920 x 1080 Active matrix; thin lm transistor (TFT) liquid crystal display (LCD); 0.
English-14 T roubleshooting No picture • The signal cable should be completely connected to the display card/computer . • The display card should be completely seated in its slot. • The monitor does not support DisplayPort converter signal. • Power Switch and computer power switch should be in the ON position.
English English-15 USB Hub does not operate • Check to make sure the USB cable is properly connected. Refer to your USB devise User’s Manual. • Check if the USB upstream port on the monitor is connected to the USB downstream port on the computer .
English-16 TCO Certied Displays 6 Congratulations! This product is TCO Certied – for Sustainable IT TCO Certied is an international third party sustainability certication for IT products. TCO Certied ensures that the manufacture, use and recycling of IT products reect environmental, social and economic responsibility .
English English-17 Manufacturer’s Recycling and Energy Information NEC DISPLA Y SOLUTIONS is strongly committed to environmental protection and sees recycling as one of the company’s top priorities in trying to minimize the burden placed on the environment.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté NEC MultiSync E232WMT c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du NEC MultiSync E232WMT - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation NEC MultiSync E232WMT, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le NEC MultiSync E232WMT va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le NEC MultiSync E232WMT, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du NEC MultiSync E232WMT.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le NEC MultiSync E232WMT. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei NEC MultiSync E232WMT ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
