Manuel d'utilisation / d'entretien du produit FISH 4500/4600 du fabricant Navman
Aller à la page of 36
NA V MAN TRA CKFISH 6600 CHA RTPLOTTER AND FISHFINDER Installation and Operation Manual www.navman.com FISH 4500 /4600 FISHFINDERS English ............
FCC Statement Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a normal installation.
1 Introduction ............................................................................................ 4 1-1 Benefits of the FISH 4500/4600 ................................................................... 4 1-2 How the FISH 4500/4600 works ...
Congratulations on choosing a Navman fish- finder . For maximum benefit, please read this manual carefully before installation and use. This manual describes how to install and set up the FISH 4500/46.
1-2 How the FISH 4500/4600 works The FISH 4500/4600 has two parts: - the transducer attached to the hull - the display unit. The transducer generates an ultrasonic pulse (sound that is above the hearing range of the human ear), which travels down towards the bottom at a speed of about 4800 ft/sec (1463 m/ sec), spreading out into a cone shape.
ESC If a menu is not displayed then go to the sonar display . If a menu is displayed then cancel any changes and return to the previous menu. DISP Shows the Display menu. , Cursor keys move the selection highlight and , change settings. MENU Press to show the Options menu on a display; press again to show the Setup menu.
Power Off T o turn the fishfinder off, hold . A countdown box appears. Continue to hold for 3 seconds until the fishfinder turns off. Note: If the unit is wired for Auto Power (section 6-5 Wiring options) the fishfinder can be turned off only when the boat’s ignition is turned off.
3 Setting up the FISH 4500/4600 Press MENU twice, to show the Setup menu, then select a particular option using the or cursor keys. (Section 2 Basic Operation, describes the basic use of keys.) The Setup menu and options The Setup menu and options are summarized below .
Press MENU once or more until the Setup menu is displayed, then select System : Language Select the language for the displays. The options are: English, Italian, French, German, Spanish, Dutch, Swedish, Portuguese, Finnish Greek and Chinese.
Fish filter Use this to select the minimum fish symbol size to be displayed. There is a choice of: Small , Medium and Large . Digit size Use this to remove or change the size of the depth display on the sonar displays. There is a choice of: Small , Medium and Large .
Set remaining Before doing a partial refill of the tank or remov- ing fuel manually from the tank (for example, by siphoning it off): 1. Note the Remaining reading on the Fuel display . 2. Note how much fuel is added or removed. 3. Calculate how much fuel is now in the tank.
Sy mb ol Alarm Beeper Alarm condition is Name Cycle met when the: Too 1 / 5 sec depth is less than sh allo w the alarm trigger value Too 1 / 2 sec depth is greater than deep the alarm trigger value Fish 1 short echo matches the beep profile of a fish Temp.
3-7 Setup > Comms Use this feature when the FISH 4500/4600 is connected to other Navman instruments through NavBus or any compatible NMEA instrument. Press MENU once or more until the Setup menu is displayed, then select Comms : NMEA Out NMEA is generally used with third party instru- ments.
Fuel Calibrating the fuel usage can improve the ac- curacy of fuel measurements. T win engine installations require each fuel trans- ducer to be calibrated. This can be done at the same time with two portable tanks or at different times using one portable tank.
4-1 Interpreting the display The sonar displays do not show a fixed distance travelled by the boat; rather , they display a his- tory , showing what has passed below the boat during a certain period of time. The history of the sonar signal displayed de- pends on the depth of the water and the scroll speed setting.
Shadows Shadows are created around areas where the ultrasonic beam cannot ‘see’. These areas include hollows on the bottom or beside rocks and ledges, where the strong echoes returned off the rocks obscure the weak echoes of the fish and may also create a double bottom trace.
When to use 200 kHz The 200 kHz frequency is especially suitable for use in shallow and medium depth water, typically less than 500 ft. (150 m) and while running at speed.
1 minute ago 30 seconds ago Now Comparison of the same fish scenario displayed at different frequencies: 50 kHz display Dual screen 200 kHz display 200/50 Khz display Mixed display Note the wider bottom trace Note the smaller , defined fish arches and more bottom detail.
4-3 Fish detection and display Where to find fish Underwater features like reefs, wrecks and rocky outcrops attract fish. Use the 50 kHz or 50/200 kHz frequency display to find these features, then look for fish by passing over the feature slowly several times using the Zoom display (see section 5-2 Sonar Zoom display).
4-4 Gain Gain (sensitivity) controls the amount of detail displayed on the FISH 4500/4600. Understand- ing how to set suitable Gain settings is important for optimum performance.
4-5 Range Range is the vertical depth displayed on the FISH 4500/4600. The Navman fishfinder has two range modes, Auto Range and Manual Range: • In Auto Range, the fishfinder adjusts the depth range automatically so the bottom is always shown in the lower part of the display .
5 The Displays Press DISP to show the Display menu. Use or to select display tab, then select a particular display using the or cursor keys. The Display menu is summarized here and each display is shown in the following sections. Most displays have an Options menu so that relevant features can be changed quickly .
T o customize the size of the Data header , high- light Size and press ENT . There is a choice of Small , Medium , Large . T o customize the data items to be displayed: 1. Highlight Data setup and press ENT . The Data header increases in size to display all twelve data fields.
5-4 Sonar 50/200 display T o show the Sonar 50/200 display , press DISP and select Sonar T ab, select Sonar 50/200 and press ENT . This shows a split display , with the 50 kHz sonar history on the left side and the 200 kHz sonar history on the right side.
T o show the Fuel display , press DISP and select Other T ab, select Fuel and press ENT . There are no options. (See section 3-3 Setup > Fuel for information about setting up the fuel values. If the number of engines is set to 0 , the fuel features are turned off.
5-8 About display T o show the About display , press DISP , select Other T ab, select About and press ENT . There are no options. This shows the fishfinder model number , the software and hardware versions and wiring information. Note the software version before contacting your Navman dealer for technical advice.
Correct installation is critical to the performance of the FISH 4500/4600. There are two compo- nents to install, the display unit and the trans- 6 Installation and Maintenance ducer . It is vital to read the entire installation section of this manual before attempting to install the components.
Removing the display unit The display unit can be removed after each use for protection against the environment or security reasons. When removing the display unit, ensure that The FISH 4500/4600 has three sockets located on the rear of the display unit.
Power Fuel / SmartCraft* Black (8-pin) White (8-pin) Pin Wire Color Function Function 1 Black GND (power & NMEA) GND (NMEA 2) 2 Brown ( not used ) +9V DC Output 3 White NMEA out NMEA 2 in 4 Blue N.
Auto power wiring option Black wire : Connect this to the negative battery terminal. Red wire : Connect this to the positive battery terminal after the main switch.
6-7 Cleaning and maintenance The FISH 4500/4600 screen is covered by a proprietary anti-reflection coating. T o avoid damage, clean the screen only with a damp cloth and mild detergent when dirty or covered in sea salt. Avoid abrasive cleaners, petrol or other solvents.
Appendix A - Specifications Specifications FISH 4500 FISH 4600 Display type: TFT Color Screen Resolution 320 high x 234 wide(pixels) CCFL multi-level backlighting Display size: 5.0” (127mm) diagonal 6.4” (163mm) diagonal Supply voltage: 10.5 to 32 V DC Supply current at 13.
.
This troubleshooting guide is written with the as- sumption that the user has read and understood the relevant sections in this manual. It is possible in many cases to solve difficulties without having to send the display unit back to the manufacturer for repair .
Appendix D - Como entrar em contacto connosco www .navman.com . NORTH AMERICA BNT - Marine Electronics 30 Sudbury Rd, Acton, MA 01720. Toll Free: +1 866 628 6261 Fax: +1 978 897 8264 e-mail: sales@navmanusa.com web: www.navman.com OCEANIA Australia Navman Australia Pty.
Lon 174° 44.535`E Lat 36° 48.404`S NA VMAN FISH 4500 and FISH 4600 Made in New Zealand MN000201D LF 000150A English LF 000154A Spanish LF 000159A Portuguese.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Navman FISH 4500/4600 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Navman FISH 4500/4600 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Navman FISH 4500/4600, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Navman FISH 4500/4600 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Navman FISH 4500/4600, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Navman FISH 4500/4600.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Navman FISH 4500/4600. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Navman FISH 4500/4600 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
