Manuel d'utilisation / d'entretien du produit SFCS-16 du fabricant Multiquip
Aller à la page of 52
OPERATION AND PARTS MANUAL Floor Covering Scraper Model SFCS-16 Revision #4 ( 05/28/09 ) THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES T o find the latest revision of this publication, visit our website at: www .
.
TABLE OF CONTENTS SFCS-16 OPERATION AND PARTS M ANUAL REV #4 (05/28/09) PAGE 3 MULTIQUIP SFCS-16 Floor Covering Scrapper Table Of Contents ................................................................................................................
PARTS ORDERING PROCEDURES SFCS-16 OPERATION AND PARTS M ANUAL REV #4 (05/28/09) PAGE 4 www .m ultiquip .com Or dering par ts has never been easier! Choose from thr ee easy options: WE A CCEPT ALL MAJO.
NOTICE TO OPERATORS SFCS-16 OPERATION AND PARTS M ANUAL REV #4 (05/28/09) PAGE 5 IF YOU CAN NOT READ OR DO NOT FULLY UNDERSTAND THE CONTENTS OF THIS MANUAL, PLEASE CONTACT THE FACT ORY FOR PROPER ASSISTANCE BEFORE ATTEMPTING TO OPERATE THIS PRODUCT.
NOTICE TO OPERATORS SFCS-16 OPERATION AND PARTS M ANUAL REV #4 (05/28/09) PAGE 6 The concept of electrically powered, walk-behind type floor covering removal equipment has been successfully utilized for many years as a practical so lution to many types of floor covering removal requirements.
OPERATOR INSTRUCTIONAL DATA SHEET SFCS-16 OPERATION AND PARTS M ANUAL REV #4 (05/28/09) PAGE 7 The following undersigned oper a tors of the FLOOR COVERING SCRAPER described a nd/or pert a ining to thi.
SAFETY PRECAUTIONS SFCS-16 OPERATION AND PARTS M ANUAL REV #4 (05/28/09) PAGE 8 THE FOLLOWING SAFETY PRECAUTIONS PROVIDE SOME COMMON SENSE GUIDES TO PROMOTE SAFETY AND EFFICIENCY WITH THE FLOOR COVERING SCRAPER.
SAFETY PRECAUTIONS SFCS-16 OPERATION AND PARTS M ANUAL REV #4 (05/28/09) PAGE 9 of b a ck rel a ted injuries. Alw a ys lift the FLOOR COVERING SCRAPER with leg muscles a nd not with the b a ck.
SAFETY PRECAUTIONS SFCS-16 OPERATION AND PARTS M ANUAL REV #4 (05/28/09) PAGE 10 person a l injury. Keep a ll body p a rts, loose clothing a nd foreign objects cle a r of the oscill a ting bl a de/ a .
ASSEMBLY INSTRUCTIONS/OPERATION SFCS-16 OPERATION AND PARTS M ANUAL REV #4 (05/28/09) PAGE 11 Assembly The MULTIQUIP SFCS16 FLOOR COVERING SCRAPER is shipped from the f a ctory secured on a speci a lly designed wooden p a llet a nd protected from extern a l d a m a ge by a corrug a ted c a rton or wood cr a te.
ASSEMBLY INSTRUCTIONS/OPERATION SFCS-16 OPERATION AND PARTS M ANUAL REV #4 (05/28/09) PAGE 12 b a ckw a rds tow a rd the oper a tor. FIGURE 2. Position the a djust a ble section a t a comfort a ble height. Reinst a ll the thre a ded knobs a nd tighten until the studs trust up tight a g a inst the a djust a ble h a ndle section.
ASSEMBLY INSTRUCTIONS/OPERATION SFCS-16 OPERATION AND PARTS M ANUAL REV #4 (05/28/09) PAGE 13 cutting edge f a ces down a g a inst the surf a ce. FI GURE 4. This configur a tion a llows the bl a de to skim over the surf a ce a nd minimize a ny tendency to gouge or dig into the wood.
ASSEMBLY INSTRUCTIONS/OPERATION SFCS-16 OPERATION AND PARTS M ANUAL REV #4 (05/28/09) PAGE 14 Flip the bl a de over for use on wood surf a ces. Specific bl a des a re a v a il a ble for removing covering m a teri a ls from either concrete or wood surf a ces.
ASSEMBLY INSTRUCTIONS/OPERATION SFCS-16 OPERATION AND PARTS M ANUAL REV #4 (05/28/09) PAGE 15 RESULT IN PROPERTY DAMAGE AND/OR PERSONAL INJURY. 1) Properly disconnect the extension cord or the FLOOR COVERING SCRAPER from the power source.
ASSEMBLY INSTRUCTIONS/OPERATION SFCS-16 OPERATION AND PARTS M ANUAL REV #4 (05/28/09) PAGE 16 5) We a r proper s a fety a pp a rel a nd equipment. Use the T-h a ndled Allen wrench to loosen the button he a d c a p screws which secure the fence pl a te to the exciter pl a te.
ASSEMBLY INSTRUCTIONS/OPERATION SFCS-16 OPERATION AND PARTS M ANUAL REV #4 (05/28/09) PAGE 17 CAUTION Do not substitute a different fastener type for the button head capscrew configuration. The button head configuration was chosen for operational considerations.
ASSEMBLY INSTRUCTIONS/OPERATION SFCS-16 OPERATION AND PARTS M ANUAL REV #4 (05/28/09) PAGE 18 CAUTION Improper knob tension and/or improperly securing the operator handle to the main frame can result in an unstable platform configuration. An unstable platform configuration can result in property damage and/or personal injury.
ASSEMBLY INSTRUCTIONS/OPERATION SFCS-16 OPERATION AND PARTS M ANUAL REV #4 (05/28/09) PAGE 19 DANGER BLADES ARE EXTREMELY SHARP. CONTACT WITH THE BLADE CAN RESULT IN PROPERTY DAMAGE AND/OR PERSONAL INJURY. BLADES ARE PROVIDED WITH A PROTECTIVE COVER OVER THE CUTTING EDGE.
ASSEMBLY INSTRUCTIONS/OPERATION SFCS-16 OPERATION AND PARTS M ANUAL REV #4 (05/28/09) PAGE 20 TRANSPORTING THE FLOOR COVERING SCRAPER. The FLOOR COVERING SCRAPER h a s a n oper a tion a l weight th a t prohibits one person from lo a ding a nd/or unlo a ding it a lone by convention a l, physic a l efforts.
ASSEMBLY INSTRUCTIONS/OPERATION SFCS-16 OPERATION AND PARTS M ANUAL REV #4 (05/28/09) PAGE 21 Remove the bl a de or cer a mic tile ripper a tt a chment a ccording to the procedures a s outlined in this m a nu a l for the a bove listed configur a tions.
ASSEMBLY INSTRUCTIONS/OPERATION SFCS-16 OPERATION AND PARTS M ANUAL REV #4 (05/28/09) PAGE 22 CAUTION Operating the Surface Grinder from a power source of improper voltage and/or amperage will result in unrepairable damage to the electric motor and related controls.
ASSEMBLY INSTRUCTIONS/OPERATION SFCS-16 OPERATION AND PARTS M ANUAL REV #4 (05/28/09) PAGE 23 9) Couple the NEMA L5-15R recept a cle of the f a ctory supplied extension cord a nd the NEMA L5-15P plug loc a ted on the FLOOR COVERING SCRAPER together. Twist to lock.
ASSEMBLY INSTRUCTIONS/OPERATION SFCS-16 OPERATION AND PARTS M ANUAL REV #4 (05/28/09) PAGE 24 1) The FLOOR COVERING SCRAPER utilizes a n offset weight design (termed the exciter) th a t moves the bl a de or cer a mic tile ripper a tt a chment with a r a ndom orbit oscill a tion.
ASSEMBLY INSTRUCTIONS/OPERATION SFCS-16 OPERATION AND PARTS M ANUAL REV #4 (05/28/09) PAGE 25 PROPERTY DAMAGE AND/OR PERSONAL INJURY. THIS PROCEDURE IS ESPECIALLY IMPORTANT WHEN OPERATING THE FLOOR COVERING SCRAPER ON FLOORS AND/OR SURFACES ABOVE GROUND LEVEL.
ASSEMBLY INSTRUCTIONS/OPERATION SFCS-16 OPERATION AND PARTS M ANUAL REV #4 (05/28/09) PAGE 26 c) The covering remov a l process c a n be extremely a br a sive to the bl a de cutting edge. Bl a des c a n be sh a rpened in the field by the use of the met a l file stored on the fixed section of the oper a tor h a ndle.
ASSEMBLY INSTRUCTIONS/OPERATION SFCS-16 OPERATION AND PARTS M ANUAL REV #4 (05/28/09) PAGE 27 electrocution concern for the oper a tor a nd/or a ssoci a ted work personnel. DANGER WATER OR OTHER CONDUCTIVE MATERIALS DEPOSITED ON THE WORK SURFACE INCREASES THE ELECTROCUTION POTENTIAL FOR THE OPERATOR AND/OR ASSOCIATED WORK PERSONNEL.
ASSEMBLY INSTRUCTIONS/OPERATION SFCS-16 OPERATION AND PARTS M ANUAL REV #4 (05/28/09) PAGE 28 surf a ce without first stopping the m a chine to a djust mech a nic a l link a ges or bend over to oper a te a cr a nk lever system. The B a ck-S a ver™ Control System fe a tures a cr a nk lever loc a ted on the oper a tor console.
ASSEMBLY INSTRUCTIONS/OPERATION SFCS-16 OPERATION AND PARTS M ANUAL REV #4 (05/28/09) PAGE 29 8) P a rt Number SFCS16-1900 Bl a de c a n be mounted to the FLOOR COVERING SCRAPER in the offset configur a tion to a llow coverings to be removed from under the kick p a nel a re a s of c a binets a nd other, un a ccessible loc a tions.
ASSEMBLY INSTRUCTIONS/OPERATION SFCS-16 OPERATION AND PARTS M ANUAL REV #4 (05/28/09) PAGE 30 b) To lubric a te the exciter be a ring housing c a sting. The exciter unit utilizes a se a led type b a ll be a ring. The Zerk® fitting provides lubric a tion for the self- a ligning fe a ture of the be a ring unit.
ASSEMBLY INSTRUCTIONS/OPERATION SFCS-16 OPERATION AND PARTS M ANUAL REV #4 (05/28/09) PAGE 31 FIGURE 33 ELECTRIC MOTOR SERVICE. The electric motor is c a p a ble of oper a ting for m a ny ye a rs with a re a son a bly sm a ll a mount of m a inten a nce.
SFCS-16 OPERATION AND PARTS M ANUAL REV #4 (05/28/09) PAGE 32 TROUBLESHOOTING Troubleshooting ELECTRIC MOTOR. MOTOR FAILS TO START ON/OFF switch in the OFF position. Pl a ce switch in the ON position. Therm a l protection switch a ctiv a ted. Allow time for motor to cool.
SFCS-16 OPERATION AND PARTS M ANUAL REV #4 (05/28/09) PAGE 33 STORAGE Storage Proper procedure for long term stor a ge of the FLOOR COVERING SCRAPER will protect it a g a inst the effects of corrosion a nd d a m a ge.
SPECIFICATIONS SFCS-16 OPERATION AND PARTS M ANUAL REV #4 (05/28/09) PAGE 34 Specifications FRAME STRUCTURE................................................................................. Uniti zed, Welded Steel Pl a te DRIVE SYSTEM .................
SFCS-16 OPERATION AND PARTS M ANUAL REV #4 (05/28/09) PAGE 35 NOTE PAGE.
SFCS-16 OPERATION AND PARTS M ANUAL REV #4 (05/28/09) PAGE 36 EXPLANATION OF CODE IN REMARKS COLUMN The f ollowing s ection e xpl a in s the different s ym b ol s a nd rem a rk s us ed in the P a rt s s ection of thi s m a n ua l. U s e the help n u m b er s fo u nd on the ba ck p a ge of the m a n ua l if there a re a ny qu e s tion s .
SFCS-16 OPERATION AND PARTS M ANUAL REV #4 (05/28/09) PAGE 37 RECOMMENDED SPARE PARTS MULTIQUIP MODEL SFCS-16 FLOOR COVERING SCRAPER 1 TO 3 UNITS Qty. P/N De s cription 1 ............ SFCS160320 .........BEARING, 2-BOLT FLANGE S/N 26814 AND BELOW 1 ..
ADJUSTABLE AXLE ASSY. SFCS-16 OPERATION AND PARTS M ANUAL REV #4 (05/28/09) PAGE 38 ADJUSTABLE AXLE ASSY ..
ADJUSTABLE AXLE ASSY. SFCS-16 OPERATION AND PARTS M ANUAL REV #4 (05/28/09) PAGE 39 ADJUSTABLE AXLE ASSY. NO. PART NO. PART NAME QTY. REMARKS 1 SFCS160060 AXLE 1 2 SFCS160130 AXLE ARM ASSY.
REPLACEMENT CUTTING BLADES ASSY. SFCS-16 OPERATION AND PARTS M ANUAL REV #4 (05/28/09) PAGE 40 REPLACEMENT CUTTING BLADES ASSY ..
REPLACEMENT CUTTING BLADES ASSY. SFCS-16 OPERATION AND PARTS M ANUAL REV #4 (05/28/09) PAGE 41 REPLACEMENT CUTTING BLADES ASSY. NO. PART NO. PART NAME QTY.
FRAME ASSY. SFCS-16 OPERATION AND PARTS M ANUAL REV #4 (05/28/09) PAGE 42 FRAME ASSY..
FRAME ASSY. SFCS-16 OPERATION AND PARTS M ANUAL REV #4 (05/28/09) PAGE 43 FRAME ASSY. NO. PART NO. PART NAME QTY. REMARKS 1 SFCS160010 FRAME .................................................................................... 1............ S/ N 26814~BE LOW 1 SFCS160011 FRAME .
FRAME ASSY. SFCS-16 OPERATION AND PARTS M ANUAL REV #4 (05/28/09) PAGE 44 FRAME ASSY ..
FRAME ASSY. SFCS-16 OPERATION AND PARTS M ANUAL REV #4 (05/28/09) PAGE 45 FRAME ASSY. NO. PART NO. PART NAME QTY. REMARKS 20 SFCS87061800 BOLT, CARRIAGE 3/8-16 UNC X 2-1/4 ” PLATED 2 21 SFCS55050600 SCREW, BUTTON HEAD 5/16-18 UNC X 3/4 ” PLATED 2 22 SFCS160311 MOUNT, RUBBER ASSY.
OPERATOR HANDLE ASSY. SFCS-16 OPERATION AND PARTS M ANUAL REV #4 (05/28/09) PAGE 46 OPERATOR HANDLE ASSY..
OPERATOR HANDLE ASSY. SFCS-16 OPERATION AND PARTS M ANUAL REV #4 (05/28/09) PAGE 47 OPERATOR HANDLE ASSY. NO. PART NO. PART NAME QTY. REMARKS 1 SFCS160180 HANDLE, LOWER 1 2 SFCS160160 HANDLE, TOP 1 3 SFCS160140 CRANK ASSY.
DECALS SFCS-16 OPERATION AND PARTS M ANUAL REV #4 (05/28/09) PAGE 48 DECALS 3 8 6 11 1 2 W ARNING AL W A YS OPERA TE THIS MACHINE WITH A GR OUND FA UL T CIRCUIT INTERRUPTER UTILIZED IMPROPER USA GE CAN RESUL T IN AN ELECTRICAL SHOCK AND/OR ELECTROCUTION.
DECALS SFCS-16 OPERATION AND PARTS M ANUAL REV #4 (05/28/09) PAGE 49 DECALS NO. PART NO. PART NAME QTY. REMARKS 1 TBD DECAL: “ MQ LOGO LARGE ” 1 2 SP85030 DECAL: WARNING 1 3 512910 DECAL: “ MQ L.
Effective : February 22, 2006 TERMS AND CONDITION OF SALE— SFCS-16 OPERATION AND PARTS M ANUAL REV #4 (05/28/09) PAGE 50 PAY M E N T T E R M S Te r m s of p a yment for p a rt s a re net 3 0 d a y s . FREIGHT POLI CY All p a rt s order s will b e s hipped collec t or prep a id with the ch a rge s a dded to the in voice .
SFCS-16 OPERATION AND PARTS M ANUAL REV #4 (05/28/09) PAGE 51 NOTE PAGE.
OPERATION AND PARTS MANUAL Yo u r Loc a l De a ler i s : HERE’S HOW TO GET HELP PLEA S E HA VE THE MODEL AND S ERIAL NUMBER ON-HAND WHEN CALLING © COPYRIGHT 2009, MUL TIQUIP INC. M u lti qu ip Inc a nd the MQ logo a re regi s tered tr a dem a rk s of M u lti qu ip Inc.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Multiquip SFCS-16 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Multiquip SFCS-16 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Multiquip SFCS-16, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Multiquip SFCS-16 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Multiquip SFCS-16, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Multiquip SFCS-16.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Multiquip SFCS-16. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Multiquip SFCS-16 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
