Manuel d'utilisation / d'entretien du produit DFG Series du fabricant Multiquip
Aller à la page of 80
OPERATION AND PARTS MANUAL Electric, Gasoline and Propane Converted Crack Saw Model CS8 Series Revision #4 ( 05/28/09 ) Electric and Gasoline Surface Grinders Model DFG Series THIS MANUAL MUST ACCOMPANY THE EQUIPM ENT AT ALL TIMES T o find the latest revision of this publication, visit our website at: www .
.
TABLE OF CONTENTS DFG-SERIES SURFACE GRINDERS OPERATION AN D PARTS MANUAL REV. #4 (05/ 28/09) PAGE 3 MULTIQUIP DFG SERIES SURFACE GRINDERS Table Of Contents ..............................................................................................
TABLE OF CONTENTS DFG-SERIES SURFACE GRINDERS OPERATION AN D PARTS MANUAL REV. #4 (05/ 28/09) PAGE 4 Maintenance/ Service ............................................................................................................ ................ 40 Preventative Maint enance Che ck List .
DFG-SERIES SURFACE GRINDERS OPERATION AN D PARTS MANUAL REV. #4 (05/ 28/09) PAGE 5 NOTE PAGE.
PARTS ORDERING PROCEDURES DFG-SERIES SURFACE GRINDERS OPERATION AN D PARTS MANUAL REV. #4 (05/ 28/09) PAGE 6 www .m ultiquip .com Or dering par ts has never been easier! Choose from thr ee easy option.
NOTICE TO OPERATORS DFG-SERIES SURFACE GRINDERS OPERATION AN D PARTS MANUAL REV. #4 (05/ 28/09) PAGE 7 IF YOU CAN NOT READ OR DO NOT FULLY UNDERSTAND THE CONTENTS OF THIS MANUAL, PLEASE CONTACT THE F ACTORY FOR PRO PER ASSISTANCE BEFORE ATTEMPTING TO O PERATE THIS PRODUCT.
NOTICE TO OPERATORS DFG-SERIES SURFACE GRINDERS OPERATION AN D PARTS MANUAL REV. #4 (05/ 28/09) PAGE 8 The concept of powered SURFACE GRINDER has been successfully utilized for many years as a practic al solution to many types of surface preparation requi rements.
OPERATOR INSTRUCTIONAL DATA SHEET DFG-SERIES SURFACE GRINDERS OPERATION AN D PARTS MANUAL REV. #4 (05/ 28/09) PAGE 9 The following undersigne d oper a tors of the SURFACE GRI NDER described a nd/or pe.
SAFETY PRECAUTIONS DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 10 THE FOLLOWING SAFETY PRECAUTIONS PROVIDE SOME COMMO N SENSE GUIDES TO PROMOTE SAFETY AND EFFI CIENCY WITH THE SURFACE GRINDE R.
SAFETY PRECAUTIONS DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 11 GRINDER. Guide a g a inst the possibility of b a ck rel a ted injuries.
SAFETY PRECAUTIONS DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 12 12. When ope r a ting the DFG20E or DFG30E electric a lly powered SURFAC E GRINDERs on a surf a ce c.
SAFETY PRECAUTIONS DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 13 7) St a rt a nd oper a te the SURFACE GRINDER only in a well ventil a ted a re a . C a rbon Monoxide fumes given off by a n engine a re poisonous. Bre a thing these fumes c a n re sult in property d a m a ge a nd/or person a l injury.
SAFETY PRECAUTIONS DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 14 of the belt gu a rd, properl y dispose a nd repl a ce with a genuine, f a ctory a pproved, repl a cement p a rt only. 7) M a int a in a ll s a fety a nd oper a tion dec a ls in proper condition.
DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 15 ASSEMBLY INSTRUCTIONS/OPERATIONS Assembly The DFG Series SU RFACE GRINDER i s shipped from the f a ctory secured on a speci a lly des igned wooden p a llet a nd protected from extern a l d a m a ge by a corrug a ted c a rton or wood c r a te.
DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 16 ASSEMBLY INSTRUCTIONS/OPERATIONS INSTALLING THE SG24-1000 SAFETY AND DUST SHIELD ASSEMBLY KIT. Application: All Models. Tools Required: 1 e a ch, 5/32 inch Allen wrench. 1 e a ch, 7/16 inch wrench.
DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 17 ASSEMBLY INSTRUCTIONS/OPERATIONS FIGURE 3 6) Assemble the two e a ch, hose cl a mps P/N 14821-012 over the PN 2900 18-093 v a cuum hose. Inst a ll the v a cuum hose over the v a cuum hose a tt a ch fittings.
DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 18 ASSEMBLY INSTRUCTIONS/OPERATIONS 3) Using the funnel, fill the fuel t a nk with fresh, cle a n fuel a ccording to the spe cific a tions outlined in the m a teri a l supplied by the engine m a nuf a cturer.
DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 19 ASSEMBLY INSTRUCTIONS/OPERATIONS a ) The C06 a nd C10 co a rse gr a de stones a re the most popul a r utilized stones a nd result in m a ximum m a teri a l remov a l r a tes.
DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 20 ASSEMBLY INSTRUCTIONS/OPERATIONS utilized for the fin a l finishing sequen ce. Gener a lly spe a king, the more a ggre ssive the fl a il configur a tions, the more co a rse the resulting finish a nd texture.
DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 21 ASSEMBLY INSTRUCTIONS/OPERATIONS COST 1 PRODUCTIVITY 5 SERVICE LIFE 2 The be a m fl a il should be repl a ced wh en the outside di a meter is worn to a pproxim a tely 1-5/16 inch or the inside di a meter elong a tes to a pproxim a t ely 3/4 inch.
DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 22 ASSEMBLY INSTRUCTIONS/OPERATIONS sp a cer w a sh er on the sc a rifier block. By mixing a nd m a tching fl a ils a nd s p a cer w a shers of specifi c thicknesses, the required num ber of components c a n be a ssembled on a block in a minimum a mount of time.
DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 23 ASSEMBLY INSTRUCTIONS/OPERATIONS Wire brushes a re a v a il a ble in a number of fl a t wire sizes a nd resulting configur a tions. With continuous use, the fl a t wire will t a ke a "set" th a t c a n limit effectiven ess a nd over a ll productivity.
DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 24 ASSEMBLY INSTRUCTIONS/OPERATIONS of up to sever a l hund red squ a re feet per hour c a n be re a lized. Howe ver, m a ny thin film ( ie: 5 mill thickness a nd thinner) ureth a ne co a tings present a much more diff icult remov a l problem.
DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 25 ASSEMBLY INSTRUCTIONS/OPERATIONS CAUTION Follow all safety precautions for the safety solvent. 2) Remove the c a p screw from the unit. Cle a n the newly expose d a re a s of the insert a nd S CRAPE- R-TACH unit with the s a fety solvent.
DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 26 ASSEMBLY INSTRUCTIONS/OPERATIONS To m a ximize the servi ce life of the di a mond segments, it is reco mmended th a t the bl a des be rot a ted between gimb a l he a ds a minimum of once for every 8 hours of oper a tion.
DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 27 ASSEMBLY INSTRUCTIONS/OPERATIONS a ppropri a te weight to the h a ndle for a dded st a bility. Other me a ns c a n a lso be utilized to support the fr a me a nd provide proper m a chi ne st a bility.
DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 28 ASSEMBLY INSTRUCTIONS/OPERATIONS 5) Using a h a mmer, strike the wider si de of the mounting wedge with cont rolled, direct blows to firmly se a t the multi- a ccessory a tt a chment into the a luminum disc.
DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 29 ASSEMBLY INSTRUCTIONS/OPERATIONS FIGURE 28 CAUTION Do not utilize excessive force when removing a multi-accessory attachment with the pry bar. Excessive force can result in damage to the aluminum disc.
DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 30 ASSEMBLY INSTRUCTIONS/OPERATIONS Consult a pplic a ble OSHA, AGA, CGA, etc. regul a tions for the prope r tr a nsport a tion fl a mm a ble g a ses. ADJUSTING THE OPERATOR HANDL E HEIGHT.
DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 31 ASSEMBLY INSTRUCTIONS/OPERATIONS CAUTION Operating the SURFACE GRINDER from a pow er source of improper vol tage and amperage will result in un-repairable damage to the electric motor and related controls.
DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 32 ASSEMBLY INSTRUCTIONS/OPERATIONS utilizing the SURFACE GRINDER. There i s no ch a rge for this service.
DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 33 ASSEMBLY INSTRUCTIONS/OPERATIONS DANGER AS SOON AS THE CENTRI FUGAL CLUT CH ASSEMBLY BECOMES ENGAGED, THE OPERATOR MUST BE IN A POSITION TO ASSUME DIRECT AND FULL CONTROL OF THE SURFACE GRINDER.
DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 34 ASSEMBLY INSTRUCTIONS/OPERATIONS RESULT IN PROPERTY DAMAGE AND/OR PERSONAL INJURY.
DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 35 ASSEMBLY INSTRUCTIONS/OPERATIONS 5) The grinding process on m a ny wo rk surf a ce m a teri a ls c a n produce sp a rks, dust a nd other foreign p a rticle c ont a min a tion.
DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 36 ASSEMBLY INSTRUCTIONS/OPERATIONS DANGER PROPERLY DISPOSE OF ALL ACCUMULATE D MATERIALS PER OSHA AN D ENVIRONMENTAL PROTECTION AGEN CY CODES AND REGULATIONS. MANY ACCUMULA TED MATERIALS CAN BE CLASSIFI ED AS HAZARDOUS AND R EQUIRE PROPER DISPOSAL PROCEDUR ES.
DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 37 ASSEMBLY INSTRUCTIONS/OPERATIONS intention a lly sloped for dr a in a ge consider a tions. Very few, if a ny, floors a re specific a lly designed to be unfl a t. Unfortun a tely, m a ny turn out th a t w a y.
DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 38 ASSEMBLY INSTRUCTIONS/OPERATIONS cl a ssific a tion is from the Americ a n Co ncrete Institute. Although the F number system is only a few ye a rs old, it offers these a dv a nt a ges: a ) The system controls both fl a tness a nd levelness.
DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 39 ASSEMBLY INSTRUCTIONS/OPERATIONS necess a ry to survey the floor during the grinding process to ensure th a t fl a tness a nd levelness specific a tions a re m a int a ined.
DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 40 MAINTENANCE/SERVICE Maintenance/Service PREVENTATIVE MAINTE NANCE CHECK LIST. Application: All Models. The norm a l oper a tion of the SURFACE GRINDER produces extreme dirt a nd dust, a long with level s of r a ndom vibr a tion.
DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 41 MAINTENANCE/SERVICE 3) Remove the rubb er l a tches a nd sli de the belt gu a rd a w a y from the engine/electric mot or until it cle a rs the c a tch mech a nism. Remove the belt gu a rd from the m a in fr a me.
DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 42 MAINTENANCE/SERVICE 1) Position the SURFACE G RINDER on a suit a ble work surf a ce with the V-belts a ppro xim a tely a t w a ist level.
DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 43 MAINTENANCE/SERVICE FIGURE 44 DANGER WEAR SAFETY EYEWEAR AND OTHER APPROPRIATE APPAREL WHEN DISASSEMBLING THE CE NTRIFUGAL CLUTCH ASSEMBLY. CAUTION ALL ONLOOKERS REGARDING THE POTENTIAL FO R FLYING DEBRIS.
DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 44 MAINTENANCE/SERVICE REPLACING THE LORD® TYPE ELASTOMERIC MOUNTS ON THE MULTI -ACCESSORY DISCS.
DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 45 MAINTENANCE/SERVICE FIGURE 49 8) Apply the inst a ll a tion lub ric a nt to the exterior surf a ce of the el a stomeric mount to minimize d a m a ge when pressing int o the mounting disc.
DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 46 MAINTENANCE/SERVICE Excessive a mounts of gre a se in the be a ring r a ce c a vity c a n a ctu a lly incre a se friction a nd resulting he a t incre a ses th a t c a n a lso dr a m a tic a lly shorten be a ring servi ce life.
DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 47 TROUBLESHOOTING Troubleshooting ELECTRIC MOTOR. Application: DFG/E Serie s SURFACE GRINDER. MOTOR FAILS TO START ON/OFF switch in the OFF position. Turn the switch to the ON position.
DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 48 TROUBLESHOOTING OPERATIONAL PROBLEMS. Application: All Models. UNEVEN MULTI-ACCESSORY ATTACHMENT WEAR Incorrect inst a ll a tion of the a tt a chment in the a luminum disc.
DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 49 STORAGE Storage Application: All Models. Proper procedure for lo ng term stor a ge of the SURFACE GRINDER will protect it a g a ins t the effects of corrosion a nd d a m a ge.
DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 50 SPECIFICATIONS Specifications STRUCTURE.................................................................... Unit ized, Welded Steel Pl a te DRIVE REDUCT ION SYSTEM ......
DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 51 NOTE PAGE.
EXPLANATION OF CODE IN REMARKS COLUMN DFG-SERIES SURFACE GRINDERS OPERATION AN D PARTS MANUAL REV #4 (05/ 28/09) PAGE 52 The f ollowing s ection e xpl a in s the different s ym b ol s a nd rem a rk s us ed in the P a rt s s ection of thi s m a n ua l.
DFG-SERIES SURFACE GRINDERS OPERATION AN D PARTS MANUAL REV #4 (05/ 28/09) PAGE 53 SUGGESTED SPARE PARTS DFG SURFACE GRINDER 1 TO 3 UNITS Gasoline Engine Model Qty. P/N Description 1 ............. 29018-037 ..............CABLE, THROTTLE 1 ............
OPERATOR HANDLE ASSY. ( ELECTRIC ) DFG-SERIES SURFACE GRINDERS OPERATION AN D PARTS MANUAL REV #4 (05/ 28/09) PAGE 54 OPERATOR HANDLE ASSY. (ELECTRIC).
OPERATOR HANDLE ASSY. ( ELECTRIC ) DFG-SERIES SURFACE GRINDERS OPERATION AN D PARTS MANUAL REV #4 (05/ 28/09) PAGE 55 OPERATOR HANDLE ASSY. (ELECTRIC) NO. PART NO. PART NAME QTY. REMARKS 1 29018-033 HANDLE, OPERATOR UNIVERSAL 1 2 29018-040 HOUSING, SWITCH .
OPERATOR HANDLE ASSY. ( GASOLINE ) DFG-SERIES SURFACE GRINDERS OPERATION AN D PARTS MANUAL REV #4 (05/ 28/09) PAGE 56 OPERATOR HANDLE ASSY . (GASOLINE).
OPERATOR HANDLE ASSY. ( GASOLINE ) DFG-SERIES SURFACE GRINDERS OPERATION AN D PARTS MANUAL REV #4 (05/ 28/09) PAGE 57 OPERATOR HANDLE ASSY. (GASOLINE) NO.
ELECTRIC MOTOR ASSY. DFG-SERIES SURFACE GRINDERS OPERATION AN D PARTS MANUAL REV #4 (05/ 28/09) PAGE 58 ELECTRIC MOTOR ASSY ..
ELECTRIC MOTOR ASSY. DFG-SERIES SURFACE GRINDERS OPERATION AN D PARTS MANUAL REV #4 (05/ 28/09) PAGE 59 ELECTRIC MOTOR ASSY. NO. PART NO. PART NAME QTY. REMARKS 1 29018-027 MOUNT, ELECTRIC MOTOR 1 2 29018-028 MOTOR, ELECTRIC, 2 HP , 115/230 VAC, 60 HZ .
GASOLINE ENGINE ASSY. DFG-SERIES SURFACE GRINDERS OPERATION AN D PARTS MANUAL REV #4 (05/ 28/09) PAGE 60 GASOLINE ENGINE ASSY..
GASOLINE ENGINE ASSY. DFG-SERIES SURFACE GRINDERS OPERATION AN D PARTS MANUAL REV #4 (05/ 28/09) PAGE 61 GASOLINE ENGINE ASSY. NO. PART NO. PART NAME QTY. REMARKS 1 GX340 ENGINE, HONDA 11 H.P. 1 2 29018-021 MOUNT, GASOLINE ENGINE 1 3 29018-022 CLUTCH, PULLEY ASSY.
WHEEL ASSY. DFG-SERIES SURFACE GRINDERS OPERATION AN D PARTS MANUAL REV #4 (05/ 28/09) PAGE 62 WHEEL ASSY ..
WHEEL ASSY. DFG-SERIES SURFACE GRINDERS OPERATION AN D PARTS MANUAL REV #4 (05/ 28/09) PAGE 63 WHEEL ASSY. NO. PART NO. PART NAME QTY. REMARKS 1 29018-046 ARM, SWING 2 2 29018-047 WHEEL 2 3 29018-048 .
TRANSMISSION ASSY. DFG-SERIES SURFACE GRINDERS OPERATION AN D PARTS MANUAL REV #4 (05/ 28/09) PAGE 64 TRANSMISSION ASSY..
TRANSMISSION ASSY. DFG-SERIES SURFACE GRINDERS OPERATION AN D PARTS MANUAL REV #4 (05/ 28/09) PAGE 65 TRANSMISSION ASSY. NO. PART NO. PART NAME QTY. REMARKS 1 29018-001 FRAME, MAIN 1 2 29018-002 COVER.
HEAD ASSY. DFG-SERIES SURFACE GRINDERS OPERATION AN D PARTS MANUAL REV #4 (05/ 28/09) PAGE 66 HEAD ASSY..
HEAD ASSY. DFG-SERIES SURFACE GRINDERS OPERATION AN D PARTS MANUAL REV #4 (05/ 28/09) PAGE 67 HEAD ASSY. NO. PART NO. PART NAME QTY. REMARKS 1 29018-051 DISC, MULTI- ACCESSORY LH 1 2 29018-052 DISC, M.
SAFETY AND DUST SHIELD ASSY. DFG-SERIES SURFACE GRINDERS OPERATION AN D PARTS MANUAL REV #4 (05/ 28/09) PAGE 68 SAFETY AND DUST SHIELD ASSY..
SAFETY AND DUST SHIELD ASSY. DFG-SERIES SURFACE GRINDERS OPERATION AN D PARTS MANUAL REV #4 (05/ 28/09) PAGE 69 SAFETY AND DUST SHIELD ASSY. NO. PART NO.
SCARIFIER ASSY . DFG-SERIES SURFACE GRINDERS OPERATION AN D PARTS MANUAL REV #4 (05/ 28/09) PAGE 70 SCARIFIER ASSY..
SCARIFIER ASSY . DFG-SERIES SURFACE GRINDERS OPERATION AN D PARTS MANUAL REV #4 (05/ 28/09) PAGE 71 SCARIFIER ASSY. NO. PART NO. PART NAME QTY. REMARKS 1 SFSG241900012 HOUSING 1 2 29018-083 BUSHING 2 3 SF87052000 BOLT CARRIAGE 3/8 ” -16 UNC X 2-1/2 UNC, PLATED 2 4 29019-013 WASHER, FLAT 5/8 ” , HEAT TR EATED .
SCRAPE-R-TACH ASSY. DFG-SERIES SURFACE GRINDERS OPERATION AN D PARTS MANUAL REV #4 (05/ 28/09) PAGE 72 SCRAPE-R-TACH ASSY..
SCRAPE-R-TACH ASSY. DFG-SERIES SURFACE GRINDERS OPERATION AN D PARTS MANUAL REV #4 (05/ 28/09) PAGE 73 SCRAPE-R-TACH ASSY. NO. PART NO. PART NAME QTY. REMARKS 1 29018-082 HOUSING 1 2 29018-084 HOLDER,.
DFG-SERIES SURFACE GRINDERS OPERATION AN D PARTS MANUAL REV #4 (05/ 28/09) PAGE 74 GRINDING BLOCK ASSY. GRINDING BLOCK ASSY..
DFG-SERIES SURFACE GRINDERS OPERATION AN D PARTS MANUAL REV #4 (05/ 28/09) PAGE 75 GRINDING BLOCK ASSY. GRINDING BLOCK ASSY. NO. PART NO. PART NAME QTY. REMARKS 1 SFG242101010 BLOCK 1 2 SFG242101030 O-RING 3 3 SF83040901 PIN, RETAINING, STAINLESS STEEL 3 4 29019-017 WEDGE, PLASTIC 1 5 SFSG242100020 PIN, DI AMOND PURPLE 40-50 GRIT .
DECALS. DFG SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #3 (07/13/06) PAGE 76 DECALS. KEEP GU ARDS IN PLA CE SP8-5050 W ARNING W ARNING BEFORE HOISTING THIS MACHINE CONSUL T THE APPLICABLE OPERA TOR MANUAL. IMPR OPER HOISTING PROCEDURES CAN RESUL T IN PROPER TY DAMAGE AND/OR PERSONAL INJURY .
DECALS. DFG SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #3 (07/13/06) PAGE 77 DECALS NO. PART NO. PART NAME QTY. REMARKS 1 29020-045 DECAL, WARNING 1 2 29022-033 DECAL, OPERATION 1 3 29020-.
DFG SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #3 (07/13/06) PAGE 78 Effective : February 22, 2006 TERMS AND CONDITION OF SALE— PARTS PAY M E N T T E R M S Te r m s of p a yment f or p a rt s a re net 3 0 d a y s . FREIGHT POLI CY All p a rt s order s will b e s hipped collec t or prep a id with the ch a rge s a dded to the in voice.
DFG SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #3 (07/13/06) PAGE 79 NOTE PAGE.
OPERATION AND PARTS MANUAL Yo u r Loc a l De a ler i s : HERE’S HOW TO GET HELP PLEA S E HA VE THE MODEL AND S ERIAL NUMBER ON-HAND WHEN CALLING © COPYRIGHT 2009, MUL TIQUIP INC. M u lti qu ip Inc a nd the MQ logo a re regi s tered tr a dem a rk s of M u lti qu ip Inc.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Multiquip DFG Series c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Multiquip DFG Series - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Multiquip DFG Series, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Multiquip DFG Series va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Multiquip DFG Series, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Multiquip DFG Series.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Multiquip DFG Series. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Multiquip DFG Series ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
