Manuel d'utilisation / d'entretien du produit V468-CE du fabricant Moxa
Aller à la page of 36
V460 Series WinCE User ’ s Manual Fourth Edition, April 2009 www .moxa.com/product © 2009 Moxa Inc. All righ ts reserved. Reproducti on without perm ission is prohibit ed.
V460 Series WinCE User’s Manual The software d escribed in this m anual is furnis hed under a license agreem ent and may be use d only in accordance with the term s of that agreement. Copyright Notice Copyright © 2009 Moxa Inc. All rights reserved.
Table of Contents Chapter 1 Introduction .................................................................................................. 1-1 Overview ..................................................................................................
Appendix A Firmware Upgrade Procedure .................................................................... A-1.
1 1 Chapter 1 Introduction Microsoft® Windows® CE 6.0 is an open, scalable, 3 2-bit operating sy stem (OS) that all ows you to build a wide range of innovative, small f ootprint devi ces.
V460 Series WinCE User’s Manual Introduction Overview The V460 seri es of x86 ready-to-r un embedded comput ers is designed aro und the AMD LX80 0 and Geode chipset, which exh ibits low power consumption an d high reliability. In addition to the usual comput er peripherals, th e V460 integrates dual or quad LAN po rts, 4 USB 2.
V460 Series WinCE User’s Manual Introduction V462-T-XPE x86 Ready-t o-Run Embedde d Computer wit h AMD LX 800, VGA, Dual LANs, 4 Serial Ports, CompactFlash, PC MCIA, USB, Audi o, WinXP embedded, Wide Temperature.
V460 Series WinCE User’s Manual Introduction Product Features y AMD Geode LX 800@0.9W CPU, 500 MHz y Built-in 256 MB DDR SDRAM (512MB for XPE version) y Built-in 256 MB Industrial DOM to store OS (1.
V460 Series WinCE User’s Manual Introduction y Microsoft® .NET Compact Framewor k 2.0 with service pack 2 - It of fers a choice of languages, initially Microsoft® Visual Basic® and Microsoft® Visual C#, and eliminates th e common problems faced with langua ge interoperability.
V460 Series WinCE User’s Manual Introduction Graphics and Multimedia Tools The V460 em beds high-perform ance multimedia tech nologies found on desktop com puters. These technologies pr ovide the V460 se ries with a friendly graphi cal user interface, and support waveform audi o playback and captu re.
V460 Series WinCE User’s Manual Introduction Learning Firmware Build Versions There are two ways to determine the firmware versi on of the V460 embedded computer. This informat ion is important for ident ifying which feature s are supported. y Exam ine the welcome message af ter you logon the computer.
V460 Series WinCE User’s Manual Introduction Inserting a CompactFlash Card The V460 has a t ype II CompactFlash sl ot that supports cards of both type s I and II.
V460 Series WinCE User’s Manual Introduction 1-9 PCMCIA (V462 Only) The PCMCIA slot supports the CardBus (Car d-32) Card standard an d 16-bit (PCMCIA 2.1/JEIDA 4.2) Card standard. It supports +3.3V , +5V, and +12V at a working voltage of 120 mA. Wireless LAN card expansion is optional.
2 2 Chapter 2 Getting Started In this chapter, we explain how to operate a V 460 computer from a PC. For clarity, the PC will be referred to as a “development workstatio n,” and the V460 embedd ed computer will be called a “target computer.
V460 Series WinCE User’s Manual Getting Start Starting your V460 Computer Connect the CRT monitor or LCD monitor to the target computer, and then power it on by connecting it to th e power adaptor. It takes about 15 to 20 seconds for the system to boo t up.
V460 Series WinCE User’s Manual Getting Start Step1: Scan Disk (Automatically) The system will scan the disk automatically when you start the reset procedure. Step2: Reset to Default? (Y/N) After the disk scan is complete, the system will ask you to confirm that you want to reset to defaults.
V460 Series WinCE User’s Manual Getting Start 2. Right-Click the LAN interface that you would like to configure and then click [property] . A configuration window will pop up. 3. Input the new IP address and netm ask and then click OK . Using the Command Line to Configure Network Settings Use the netconfig utility to change network settin gs.
V460 Series WinCE User’s Manual Getting Start Ethernet Adapter [PCIRTL81392]: IP Address: 192.168.4.127 SubNet Mask: 255.255.255.0 Operating Your V460 Computer via Telnet Client Before operat ing yo.
V460 Series WinCE User’s Manual Getting Start User/Group Management User Group: You should assign specific services, such as f tp and telnet, to define user groups such that these services are ac cessible only by th e users within the permissible use r group.
V460 Series WinCE User’s Manual Getting Start Adjusting Time Zone Setting the System Time Manu ally: Use the date, and time commands to query the cu rrent system date/time or to set a new system date/time. The system time is save in RTC. Stopping the syste m won’t affect the system time.
V460 Series WinCE User’s Manual Getting Start Adapter Index: 2 Address: 80 86 33 33 34 12 DHCP Enabled: NO Ethernet adapter Local Area Connection: IP Address: 192.
V460 Series WinCE User’s Manual Getting Start 2-9 Simple Network Management Protocol (SNMP) SNMP is the Internet Standard protocol for network managem ent and part of t he TCP/IP prot ocol suite.
3 3 Chapter 3 Management Tools The V460 of re ady-to-run embedde d computers are netw ork-centric platfo rms designed to se rve as front-end computers for data acquisition an d industrial control.
V460 Series WinCE User’s Manual Management Tools System Information The first page displays the system information of the V460 computer, including the firmware version of the com puter, .Net CF version, the sy stem time, and system resources including main memory and file system usage.
V460 Series WinCE User’s Manual Management Tools Process (Thread) Monitoring/Control At runtim e, the V460 comput er manages up to 3 2k applications. You can use the m anagement system to monitor and con trol them. To view curr ent process es, please click the Processes item on the tab bar.
V460 Series WinCE User’s Manual Management Tools You can also adju st the time automatically by using SNTP. Click on the check box to enable the service and click the bu tton to activate. Some list ed services cannot b e stopped in or der to maintain n ormal operation o f the computer.
V460 Series WinCE User’s Manual Management Tools Display The V460 V GA output work s through a CRT connector to display the Windows CE desktop on an LCD monitor or CRT monitor. The default setting is 800x600 , 16-bit, and 60 Hz . For general purposes, you should tune the settin g to match your LCD or CRT specifications.
V460 Series WinCE User’s Manual Management Tools 3-6.
V460 Series WinCE User’s Manual Management Tools Auto Launch Configuration You can specify programs to execute auto matically after booting up. Click the Add button to add the program and restart the V460 to execute these programs. Web Server Configuration You will need Windows 200 0 or Windows XP for Web admin istration.
V460 Series WinCE User’s Manual Management Tools On this adm inistration page, y ou can create a new web site or create a virt ual web path for your web application.
4 4 Chapter 4 System Recovery The V460 series of ready-to-run embedded com puters are Windows CE 6.0 OS platforms, a nd the internal file systems support FAT. Although it happens rarely, you may find on occasion that operating syst em files becom e damaged.
V460 Series WinCE User’s Manual System Recov ery Recovery Environment The environm ent includes the hardware and recove ry program s for conducting p reliminary tests. Hardware The hardware used for system recovery includes a V460 computer and a bootable USB disk that contains the recovery prog rams.
V460 Series WinCE User’s Manual System Recov ery 2. Bios setup on the V460. a. Insert the USB disk into the V460 co mputer. b. Power on and press DEL to e nter the bios se tup menu. c. Select [Advanced] Æ [hard Disk Boot Priority] and th en press Enter .
V460 Series WinCE User’s Manual System Recov ery 3. System recovery a. If the bios setup is correct, the com puter will restart and boot from the USB disk. b. Under command pr ompt, type cd ceboot c. In the c: directory type mkdisk to initiate the recovery procedure.
A A Appendix A Firmware Upgrade Procedure To upgrade the V460 firmware, you must download the firmware upgrade installation file. This firmware installation file is on the software CD. You may also download the latest file from the Moxa Do wnload Center.
V460 Series WinCE User’s Manual Firmware Upgrade Procedure 6. Please allow at least one minute to complete the upgra de process. After the firm ware has been upgraded successfully, press Y to keep the cu rrent network settings. Press N to reset to factory default val ues.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Moxa V468-CE c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Moxa V468-CE - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Moxa V468-CE, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Moxa V468-CE va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Moxa V468-CE, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Moxa V468-CE.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Moxa V468-CE. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Moxa V468-CE ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
