Manuel d'utilisation / d'entretien du produit 09 732 150 du fabricant Miele
Aller à la page of 80
Operating instructions Freestanding coffee machine To avoid the risk of accidents or damage to the machine, it is essential to read these instructions before it is installed and used for the first time.
Packaging material The packaging material used protects the machine during transportation. Please retain the original box and polystyrene pieces so that you can pack the machine securely, should you need to transport it in the future. The original packaging should also be kept in case the machine ever needs to be returned to Miele for servicing.
Packaging material / Disposal of old machine ..........................2 Warning and Safety instructions .....................................6 Guide to the machine .............................................1 3 Controls and display ................
Profiles .........................................................3 6 Calling up a profile .................................................3 6 Creating a profile ..................................................3 6 Select profile ...................
Descaling .......................................................5 7 Problem solving guide ............................................5 9 Transporting the machine ..........................................6 9 Evaporating the coffee machine ..........
This coffee machine complies with current safety requirements. Improper use can, however, present a risk of both personal injury and material damage. To avoid the risk of accidents and damage to the machine, please read these instructions carefully before using it for the first time.
Safety with children , There is a danger of burning and scalding from the coffee and hot water dispensing spouts. Children's skin is far more sensitive to high temperatures than that of adults. Ensure children do not touch hot surfaces of the coffee machine or place parts of their body under the dispensing spouts.
Technical safety ~ A damaged coffee machine is dangerous. Check it for any visible damage before setting it up. Never attempt to use a damaged coffee machine. ~ Before connecting the coffee machine to the mains supply, make sure that the rating on the data plate corresponds to the voltage and frequency of the household supply.
~ If the coffee machine is installed behind a kitchen furniture door, it may only be used with the furniture door open. Do not close the furniture door while the coffee machine is in use. ~ Protect the coffee machine from water and water spray. Do not immerse the machine in water.
Correct use , The spouts present a danger of burning or scalding. The liquids and steam dispensed are very hot. ~ Please note: – Keep well away from the area underneath the spouts when hot liquids and steam are being dispensed. – Do not touch hot components.
~ Only add ground coffee or cleaning tablets to the ground coffee chute. The cleaning tablets are used for degreasing the brew unit. ~ Only use milk without additives. Additives in milk usually contain sugar and this will stick to the milk pipework. ~ If using dairy milk make sure that it has been pasteurised.
~ Degrease the brew unit regularly with Miele cleaning tablets. Depending on the natural oil content of the coffee used, the brew unit can become blocked quite quickly. ~ Used coffee grounds should be disposed of with the organic rubbish or on the compost heap.
a Master switch b Hot water spout c Controls and display d Cup heating e Water container f Ground coffee chute g Coffee bean container h Grinder setting (behind the service panel) i Brew unit (behind .
a On/Off - For switching the coffee machine on and off b Drink sensors For making . Espresso / Coffee H Cappuccino k Latte macchiato c Display Shows information about the current action or status d Back # For returning to the previous menu, cancelling unwanted actions e Arrow sensors Y X For displaying further options and highlighting a selection.
The following accessories are included with your coffee machine depending on model : – Measuring scoop for ground coffee – Stainless steel milk flask MB-CM for keeping milk cool for longer (capacity 0.
Before using the coffee machine for the first time, please read these instructions and make yourself familiar with the appliance and its controls. Before using for the first time ^ Set up the coffee machine and remove any protective film (see "Installation").
Water hardness The water hardness level indicates how much calcium is dissolved in the water. The higher the calcium content, the harder the water, and the harder the water, the more often the coffee machine will need to be descaled. The coffee machine measures the amount of water used and steam made.
To operate the coffee machine, touch the sensors with your finger. You are in the drinks menu when the display shows: { Miele Select drink To make a drink, touch one of the drinks sensors. You can find more drinks in the " Further programmes" x menu.
The quality of the water plays an important part in the quality of the coffee. Warning. Bacteria can cause infection. It is important to empty and fill the container with fresh tap water every day to avoid the risk of bacteria building up. Hot or warm water or other liquids can damage the coffee machine.
Fill the coffee bean container with roasted coffee beans if you want to use freshly ground coffee beans for each cup of espresso or coffee. Alternatively, you can make coffee or espresso with ready ground coffee (see "Making coffee or espresso using ready ground coffee").
Switching on Switch the master switch on the left hand side of the machine to the "I" position. ^ Touch the On/Off sensor - . The appliance will begin rinsing after the heating-up phase.
Cups should always be pre-heated to allow the flavour of the coffee to develop and be retained. The smaller the volume of the coffee/espresso and the thicker the cup, the more important it is to pre-heat the cup. You can use the cup heating surface on the top of the coffee machine to pre-heat coffee cups and glasses.
You can adjust the central spout to suit the height of the cup you are using so that the coffee or espresso will not cool down as quickly and the crema will have a better consistency. ^ Pull the central spout down to the same level as the rim of the cup.
Espresso or coffee ^ Place a cup under the central spout. ^ Touch the sensor for the drink you want: . Espresso / Coffee x in "Further programmes": Long coffee The coffee or espresso will be dispensed from the central spout into the cup.
Cancelling preparation To cancel preparation: ^ Touch the drinks sensor which is lit up, or x for drinks from "Further programmes" again. Tip: Drink preparation can be cancelled by pressing the OK sensor as soon as "Stop" appears in the display.
Adding ready ground coffee Use the measuring scoop supplied so that the correct amount is used. Do not add more than one level scoop of ground coffee to the coffee chute.
Drinks with milk , Caution. Danger of burning and scalding from the central spout. Liquids and steam dispensed from the spouts will be very hot. Do not use milk with additives. Most additives contain sugar which will adhere to the milk pipework and damage the machine.
^ Place the milk flask on the right hand side of the coffee machine. Connect the other end of the milk tube to the central spout. You can use bottled milk or cartons. The milk tube for cartons and other suitable containers is located behind the machine front.
Preparing hot water , Danger of burning and scalding on the hot water spout. The water dispensed is very hot. Please note that the water dispensed is not hot enough for making tea. ^ Place a suitable container underneath the hot water spout. ^ Touch x .
You can customise your coffee machine to suit the type of coffee you are using. The "Parameters" menu , allows you to adjust the amount of coffee that is ground, set the brew temperature and deselect the "Pre-brewing" option. The parameters for each type of coffee can be individually specified.
Displaying and changing the parameters of a drink ^ Touch , . The , sensor will light up. ^ Select the drink you want and touch OK. The current settings for the amount of coffee, brewing temperature and pre-brewing will be displayed for this drink. Amount of coffee The coffee machine can grind and brew 6-14 g of coffee per cup.
Pre-brewing When the pre-brewing function is switched on, the freshly ground coffee is first moistened with a little hot water. Then the remaining water is forced through the moistened coffee at high pressure. This helps release the flavour of the coffee.
The flavour of the coffee produced depends not just on the type of coffee used, but also on the amount of water used. You can programme the amount of water to suit the size of your cups and the type of coffee you are using. For coffee drinks that use milk you can also set the amount of milk or milk froth to be dispensed.
Portion sizes for cappuccino and latte macchiato ^ Place a suitable container underneath the central spout. ^ Touch H or k until the ingredients for that drink are shown in the display. Cappuccino: milk froth, espresso Latte macchiato: hot milk, milk froth, espresso ^ Select all the components you want to change with the arrow sensors.
Changing portion sizes in the "Parameters" menu , ^ Touch , . ^ Select the drink you want and touch OK. ^ Select "Portion size" and touch OK. Now proceed as for changing the portion size during drink preparation Changing the portion size for different profiles You can set the portion size for individual drinks for each profile.
You can enter individual profiles to cater for different tastes and preferences. For each individual profile you can select the portion sizes for each drink (see "Setting the portion size"). The name of the current profile is shown in the top left of the display.
Select profile This selection is only possible if a profile has been allocated in addition to the Miele standard profile. ^ Touch "Select profile" and touch OK ^ Select the profile you want and touch OK. The name of the profile is shown in the top left of the display.
Changing a profile You can programme the coffee machine so that it changes back to the Miele standard profile automatically after each drink is dispensed, so that the Miele profile is always active when the machine is switched on or so that it retains the most recently selected profile.
You can use the "Settings" menu to customise the coffee machine to suit your individual requirements. Calling up the "Settings" menu ^ Touch X . You can now check or change the settings. Options which are currently selected will have a tick ( next to them.
Overview of available settings The factory setting for each option is shown in bold . Option Available settings Language deutsch , english and other languages Country Time Clock format 1 2h/2 4h Set T.
Language You can select a language and country for all display texts. Tip: If you select the wrong language by mistake, you can find the "Language" option by following the flag symbol F . Time You can set the clock display and the time of day.
The programmed times will, however, remain in memory and will be reactivated after manually switching the machine on again. Switch off at Use the arrow sensors to set the hours and minutes.
Info (display information) The "Info" option allows you to see how many portions of each drink have been made. You can also see whether more than 50 portions can be dispensed before the machine needs to be descaled ("No. of portions until descaling") or before the brew unit needs to be degreased ("No.
Factory default You can reset the settings back to the ones which were set when the coffee machine was delivered. Please refer to the "Overview of available settings" chart for the factory settings which are shown in bold.
Quick guide Clean the coffee machine regularly to avoid a build-up of bacteria. Recommended frequency What do I have to clean / maintain? Daily (before you turn the coffee machine off) Clean the water.
, Danger of burning and scalding on hot components or by hot liquids. Always allow the coffee machine to cool down before cleaning it. Caution. Water in the drip tray can be very hot. Do not use a steam cleaner to clean the coffee machine. Steam could cause a short circuit.
Milk pipework Ensure that all components in which milk is transported are cleaned on a regular basis. Milk naturally contains bacteria that rapidly multiply if the milk pipework is not cleaned properly. Soiling in the appliance may be dangerous to health.
Cleaning the milk pipework with Miele cleaning agent for milk pipework The cleaning process cannot be cancelled once it has started. The process has to be completed through to the end. ^ Touch x . ^ Select "Maintenance" and touch OK ^ Select "Clean milk pipework" and touch OK.
Central spout with cappuccinatore Clean the central spout cover by hand only using warm water and a little washing-up liquid. All other parts are dishwasher safe. ^ Push the central spout right down and remove the stainless steel cover by pulling it off towards you.
If the milk pipe is blocked, clean it under running water with the brush supplied. ^ Insert the brush in the tube and move it back and forth as far as it will go until all milk residue has been removed. ^ Fit the dispensing unit back together. ^ Push the dispensing unit back onto the central spout.
Clean the water container Clean the water container lid by hand only using hot water and a little washing-up liquid. Change the water every day to prevent a build-up of bacteria. Make sure that the valve, the underside of the water container and the surface the water container sits on are clean.
Drip tray and waste container Clean the drip tray and waste container every day to avoid unpleasant smells and mildew. The waste container is located in the drip tray. Water from rinsing also collects in the waste container. A prompt will appear in the display when the drip tray and/or the waste container is full and needs to be emptied.
Bean container and ground coffee chute , Disconnect the coffee machine from the power supply before cleaning. Tip: Use a vacuum cleaner to remove any coffee residues from the bean container and the ground coffee chute. ^ Open the bean container. ^ Remove any coffee beans.
If you cannot remove the brew unit or can only do so with difficulty, the brew unit is not in the correct position (See "Problem solving guide").
Degreasing the brew unit Depending on the natural oil content of the coffee used, the brew unit can become blocked quite quickly. Degrease the brew unit regularly with the Miele cleaning tables supplied. This ensures you can continue to make aromatic coffees and guarantees trouble-free operation of your coffee machine.
Housing External surfaces may suffer discolouration or damage if soiling is left on them for too long. Remove soiling immediately. Make sure that water cannot get behind the display. All external surfaces are susceptible to scratching and can suffer discolouration if they come into contact with unsuitable cleaning agents.
When descaling the machine, cover delicate surfaces and natural flooring to prevent damage from splashes of descaling solution. Ensure that any splashes of descaling solution are wiped up im - mediately. Limescale builds up in the coffee machine through use.
^ Place 1 descaling tablet in the water. Ensure that you adhere to the mixing ratio for the descaling tablets. It is important that you do not fill the water container with less water than prescribed. The descaling programme will otherwise be cancelled prematurely.
Most problems that occur during daily use can be easily corrected. With the help of the following guide, you will be able to find the causes of problems and rectify them. , Important! Do not open the outer casing of the machine. Repairs must only be carried out by a Miele approved service technician.
Message Possible cause and remedy "Too much ground coffee" There is too much ready ground coffee in the ground coffee chute. If more than one level scoop of ground coffee is added to the coffee chute, the brew unit cannot process the coffee.
Message Possible cause and remedy F73 or "Check the brew unit" The brew unit cannot be positioned correctly. ^ Switch the machine off with the On/Off - sensor. ^ Remove and clean the brew unit (see "Cleaning and care – Brew unit").
Unusual performance of the coffee machine Problem Possible cause and remedy The lighting remains off after the coffee machine has been switched on. The lighting has been switched off. ^ Switch the lighting on (see "Settings - Lighting"). The lamp is defective.
Problem Possible cause and remedy The sensors do not react to touch. The appliance cannot be operated. There is an internal fault. ^ Disconnect the machine from the power supply by removing the plug from the socket. The coffee machine does not switch itself on, although the "Switch on at" setting has been activated for the timer.
Problem Possible cause and remedy Neither milk nor milk froth comes out of the central spout. The milk pipework is blocked. ^ Clean the central spout, taking particular care to clean the cappuccinatore and milk pipes carefully with the cleaning brush.
Problem Possible cause and remedy Drink dispensing starts even though a sensor has not been touched. Condensate may have built up on the control panel and accidentally started the process. ^ Wipe any condensate off with a soft cloth. Milk is dripping or running out of the central spout even though no milk is being dispensed.
Problem Possible cause and remedy Coffee or Espresso is not flowing out of the central spout, or coffee is only being dispensed via one spout. The central spout has a blockage. ^ Clean the coffee pipework (see "Cleaning and care - Rinsing the machine).
Unsatisfactory results Problem Possible cause and remedy The consistency of the milk froth is unsatisfactory. The milk temperature is too high. Good milk froth can only be achieved when cold milk (below 13°C) is used. ^ Check the temperature of the milk.
Problem Possible cause and remedy The crema on the coffee or espresso is not as it should be. The grinder setting is not correct. ^ Set the grinder to a finer or coarser setting (see "Setting the coffee grinder"). The brewing temperature is too high for this type of coffee.
If you are not going to use the coffee machine for an extended period of time, e.g. whilst on holiday, or if it needs to be moved, a number of procedures will need be carried out to ensure its safety.
In the event of a fault which you cannot correct yourself, or if the machine is under guarantee please contact: – your Miele Dealer or – Miele Contact details for Miele are given at the end of this booklet. N.B. A call-out charge will be applied to ser - vice visits where the problem could have been resolved as described in these instructions.
If the default settings for "Eco mode" or the "Timer" have been altered, energy consumption will increase. The message "This setting uses more energy" will appear in the display. Pre-heating cups with hot water If you only want to pre-heat your cups occasionally, you can switch the cup heating surface off.
All electrical work should be carried out by a suitably qualified and competent person only, in strict accordance with current national and local safety regulations (BS 7671 in the UK). Installation, repairs and other work by unqualified persons could be dangerous.
Please observe the following installation instructions: Danger of overheating. Please ensure that there is adequate ventilation around the machine. Do not cover the machine with tea towels or similar objects whilst it is in use. Danger of overheating.
Appliance dimensions 74.
Current draw in standby mode (default setting) < 0.5 Watt Pump pressure: max. 15 bar Through-flow heater: 1 stainless steel thermo block Appliance dimensions ( WxHx D): 251 x 359 x 427 mm Net weight 9,9 kg Connection cable length: 140 cm Water container capacity: 1,8 l Bean container capacity: 300 g Stainless steel milk flask capacity: 0.
76.
77.
78.
79 8QLWHG.LQJGRP -IELE#O,TD &AIRACRES-ARCHAM2OAD !BINGDON/XON/847 4EL #USTOMER#ONTACT#ENTRE4EL.
M.-Nr. 09 732 150 / 03 e n-G B CM 6300.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Miele 09 732 150 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Miele 09 732 150 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Miele 09 732 150, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Miele 09 732 150 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Miele 09 732 150, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Miele 09 732 150.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Miele 09 732 150. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Miele 09 732 150 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
