Manuel d'utilisation / d'entretien du produit MX4302 du fabricant Memorex
Aller à la page of 21
HOME AUDIO SYSTEM WITH CD PLA YER AND AM/FM STEREO RADIO MODEL: MX4302 BEFORE OPERA TING THIS PRODUCT , PLEASE READ THESE INSTRUCTIONS COMPLETEL Y . OPERA TING INSTRUCTIONS MX4302.
1 W ARNING CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
2 Before using the unit, be sure to read all operating instructions carefully. Please note that these are general precautions and may not pertain to your unit. For example, this unit may not have the capability to be connected to an outdoor antenna. 1.
3 PREP ARA TION FOR USE AC OPERA TION Unwind the AC cord and extend it to its full length. Insert the small end of the AC cord into the AC power jack on the rear of the unit. Insert the other end of the AC cord into any convenient 120V 60Hz household outlet.
4 PREP ARA TION FOR USE (CONTINUED) BA TTER Y OPERA TION The battery compartment is located on the rear of the remote control. • Remove the battery compartment door by pressing down and sliding the door in the direction of the arrow. • Insert two (2) AA size batteries into the battery compartment as shown to the right.
5 LOCA TION OF CONTROLS AND INDICA T ORS 1 2 9 4 3 5 6 7 8 14 11 12 13 10 18 17 16 15 19 20 21 22 1. Display 2. Speaker T erminals (Rear of Unit) 3. POWER Button and Remote Sensor 4. STOP( ■ )/BAND Button 5. TUNING/CD Skip/Search Button 6. PLA Y/P AUSE ( ) Button 7.
6 LOCA TION OF CONTROLS AND INDICA T ORS 11 3 14 15 16 17 2 3 5 4 6 8 7 18 12 11 10 9 1. FUNCTION Button 2. Direct T rack Selection Buttons 3. OVER Button 4. PLA Y/P AUSE Button 5. STOP/BAND Button 6. TUNING DN/UP Buttons 7. RANDOM Button 8. DISPLA Y Button 9.
SETTING THE CLOCK 7 OPERA TING INSTRUCTIONS With the power off, press and hold the MEMORY/CLOCK SET button; “24H” will blink. 1 Press the MEMORY/CLOCK SET button and the hours will blink. 3 Press the TUNING/CD Skip/ Search ❶ or ❷ button to set the unit to the 24 hour (24H) mode (also known as military time), or 12 hour (12H) mode.
8 OPERA TING INSTRUCTIONS (CONTINUED) Press and hold the COLOR MODE button until RHYTHM appears in the display, then release. The display color will then change according to the rhythm of the music. Press and hold the COLOR MODE button again until RHYTHM disappears from the display to cancel Rhythm.
9 OPERA TING INSTRUCTIONS (CONTINUED) Press the POWER button to turn the unit on. 1 Press the TUNING/CD Skip/ Search ❶ or ❷ button to select a station (see Tuning note below). NOTE: If the FM band is selected and you have tuned to an FM Stereo station, the FM Stereo indicator will light in the display.
10 OPERA TING INSTRUCTIONS (CONTINUED) Press the POWER button to turn the unit on. 1 Press the MEMORY/CLOCK SET button ❶ . Within four seconds, press the REPEAT/MEMORY UP button ❷ repeatedly until the desired memory number appears on the display. 2 1 4 Use the TUNING/CD Skip/Search ❶ or ❷ button to select a station.
11 Press the POWER button to turn the unit on. 1 The CD player will read the table of contents on the disc and the total number of tracks and total playing time on the disc will appear in the display. CD 4 Press the CD OPEN/CLOSE button to open the CD Compartment and insert a CD with the label side facing up.
12 After you insert the disc into the CD player and the total number of tracks and playing time appear on the display, you may press either the CD Skip/Search ❶ or ❷ button to select a specific track for playback. 1 2 1 When the desired track number appears in the display, press the PLAY/PAUSE ( ) button.
13 To repeat a single track, while in the Stop mode, press the REPEAT/MEMORY UP button ❶ once; “REPEAT” will blink in the display. Press the CD Skip/Search ❷ or button ❸ to select the specific track that you wish to repeat. When the desired track number appears in the display, press the PLAY/PAUSE ( ) button ❹ to begin playback.
14 Press the CD Skip/Search ❶ or button ❷ to select the first track that you wish to program. When the desired track number appears in the display, press the MEMORY/CLOCK SET button ❸ again. 1 2 3 4 Press either the CD Skip/Search () ❶ or ( ) button ❷ to select the next track you wish to program.
15 To play the first 10 seconds of each track on the CD, press the INTRO button. Playback will start automatically and will play 10 seconds of each track. 1 To cancel intro playback, press the INTRO button until “INTRO” disappears from the display; playback will continue from that point.
16 With the power off, press and hold the TIMER/Sleep button ❶ ; “TIMER” will blink in the display. Within three seconds, press and hold the MEMORY/CLOCK SET button ❷ until the Timer Hour blinks in the display. 1 2 1 Within a few seconds, “TIMER” will light in the display to indicate that the timer is set.
Caring for Compact Discs • Treat the compact disc carefully. Handle the compact disc only by its edges. Never allow your fi ngers to come in contact with the shiny, unprinted side of the compact disc. • Do not attach adhesive tape, stickers, etc.
18 Symptom Possible Cause Solution Radio Noise or sound distorted Station not tuned properly for Retune the AM or FM broadcast on radio broadcasts. AM or FM. station. FM: Wire Antenna is not Extend FM Wire Antenna. extended. AM: Unit is not positioned Rotate unit until best reception is correctly.
19 FOR ADDITIONAL SET -UP OR OPERA TING ASSIST ANCE, PLEASE VISIT OUR WEBSITE A T WWW .MEMOREXELECTRONICS.COM OR CONT ACT CUSTOMER SERVICE A T 1-800-919-3647. PLEASE KEEP ALL P ACKAGING MA TERIAL FOR A T LEAST 90 DA YS IN CASE YOU NEED TO RETURN THIS PRODUCT TO YOUR PLACE OF PURCHASE OR MEMOREX.
Memcorp, Inc. Weston, FL Printed in Hong Kong Visit our website at www .memorexelectronics.com MX4302.O/M.QXD 3/4/03 7:47 AM Page 20.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Memorex MX4302 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Memorex MX4302 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Memorex MX4302, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Memorex MX4302 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Memorex MX4302, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Memorex MX4302.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Memorex MX4302. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Memorex MX4302 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
