Manuel d'utilisation / d'entretien du produit MX3710 du fabricant Memorex
Aller à la page of 21
HOME AUDIO SYSTEM WITH CD PLA YER, CASSETTE RECORDER AND AM/FM STEREO RADIO MODEL: MX3710 BEFORE OPERA TING THIS PRODUCT , PLEASE READ THESE INSTRUCTIONS COMPLETEL Y .
1 DANGER: Invisible and hazardous laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam. W ARNING TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
2 SAFETY INSTRUCTIONS INFORMATION: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
3 PREP ARA TION FOR USE (CONTINUED) SPEAKER CONNECTION 1. Place the speakers in convenient locations on either side of the unit. Usually a distance of fi ve to eight feet between speakers provides the best stereo effect, but this may vary depending on the size and acoustics of the room.
4 LOCA TION OF CONTROLS AND INDICA T ORS 1 15 13 17 16 18 21 22 23 25 24 14 20 19 2 5 4 3 6 7 8 9 10 11 12 1. CD Compartment 2. Display 3. DISPLAY Button 4. Function (CD/TAPE/TUNER) Buttons 5. STANDBY Indicator 6. POWER Button 7. PLAY/PAUSE ( ❿ ) Button 8.
5 LOCA TION OF CONTROLS AND INDICA T ORS 1 3 4 5 7 15 14 13 12 11 8 9 10 6 2 1. POWER Button 2. REPEA T/PRE (Preset) UP Button 3. FUNCTION Button 4. RANDOM Button 5. TIMER Button 6. PRE-EQ Button 7. VOLUME Down Button 8. PLA Y/P AUSE ( ❿ ) Button 9.
6 OPERA TING INSTRUCTIONS With the power off, press and hold the MEMORY/TIME SET button; “24H” will blink. 1 Press the MEMORY/TIME SET button and the hours will blink. 3 Press the TUNING/CD SKIP/ SEARCH ( ) ❶ or ( ) ❷ button to set the unit to the 24 hour (24H) mode (also known as military time, or 12 hour (12H) mode.
7 OPERA TING INSTRUCTIONS (CONTINUED) Press the POWER button to turn the unit on; the STANDBY indicator will go out. 1 Press the TUNING/CD SKIP/ SEARCH ❶ or ❷ button to select a station (see Tuning note below). NOTE: If the FM band is selected and you have tuned to an FM Stereo station, the FM Stereo indicator will light in the display.
8 OPERA TING INSTRUCTIONS (CONTINUED) Press the POWER button to turn the unit on; the STANDBY indicator will go out. 1 Press the MEMORY/TIME SET button ❶ . Within four seconds, press the REPEAT/PRE UP button ❷ until the desired memory number appears on the display.
9 Press the POWER button to turn the unit on; the STANDBY indicator will go out. 1 The CD player will read the table of contents on the disc and the total number of tracks and total playing time on the disc will appear in the display. CD 4 Press the CD OPEN/CLOSE button to open the CD compart- ment door.
10 After you insert the disc into the CD player and the total number of tracks appear on the display, you may press either the TUNING/CD SKIP/ SEARCH ( ) ❶ or ( ) ❷ button to select a specific track for playback. 1 2 1 When the desired track number appears in the display, press the PLAY/PAUSE ( ❿ ) button.
11 To repeat a single track, press the REPEAT/PRE UP button ❶ twice; “REPEAT” will blink in the display. Press the TUNING/CD SKIP/ SEARCH ( ) ❷ or ( ) button ❸ to select the specific track that you wish to repeat. When the desired track number appears in the display, press the PLAY/PAUSE ( ❿ ) button ❹ to begin playback.
12 Press the TUNING/CD SKIP/ SEARCH ( ) ❶ or ( ) button ❷ to select the first track that you wish to program. When the desired track number appears in the display, press the MEMORY/ TIME SET button ❸ again. 3 2 1 4 Press either the TUNING/CD SKIP/ Search ( ) ❶ or ( ) button ❷ to select the next track you wish to program.
13 Press the TAPE Function button. 1 Press the PLAY ( ❿ ) button to begin playback. 4 Insert a pre-recorded cassette into the slots in the Cassette Door with the open end facing up. Close the cassette door. 3 Open the Cassette Button compartment and press the STOP/EJECT button to open the cassette compartment.
14 Open the Cassette Button compartment and press the STOP/EJECT button to open the cassette compartment. Insert a good quality blank cassette tape and close the Cassette Door. 1 When you are ready to begin recording, press the RECORD () b utton. The PLAY ( ❿ ) button will also engage.
15 With the power off, press and hold the TIMER/SLEEP button ❶ until “TIMER” blinks in the display. Press and hold the MEMORY/TIME SET button ❷ until timer hour digits blink in the display. 1 2 1 Within a couple seconds, “TIMER” will light in the display to indicate that the timer is set.
SAFEGUARD AGAINST ACCIDENT AL ERASURE When a new recording is made, any program material previously recorded is automatically erased and only the new recording remains. To safeguard valuable recordings from being erased accidentally, the cassette and the deck are equipped with a special device.
Caring for Compact Discs • Treat the compact disc carefully. Handle the compact disc only by its edges. Never allow your fi ngers to come in contact with the shiny, unprinted side of the compact disc. • Do not attach adhesive tape, stickers, etc.
18 Symptom Possible Cause Solution Radio Noise or sound distorted Station not tuned properly for Retune the AM or FM broadcast on radio broadcasts. AM or FM. station. FM: Wire Antenna is not Extend Wire Antenna. extended. AM: Unit is not positioned Rotate unit until best reception is correctly.
19 FOR ADDITIONAL SET -UP OR OPERA TING ASSIST ANCE, PLEASE VISIT OUR WEBSITE A T WWW .MEMCORPINC.COM OR CONT ACT CUSTOMER SERVICE A T 1-800-919-3647. PLEASE KEEP ALL P ACKAGING MA TERIAL FOR A T LEAST 90 DA YS IN CASE YOU NEED TO RETURN THIS PRODUCT T O YOUR PLACE OF PURCHASE OR MEMOREX.
Memcorp, Inc. Weston, FL Printed in Hong Kong Visit our website at www .memcorpinc.com MX3710.O/M.QXD 4/30/02 10:49 AM Page 20.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Memorex MX3710 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Memorex MX3710 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Memorex MX3710, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Memorex MX3710 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Memorex MX3710, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Memorex MX3710.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Memorex MX3710. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Memorex MX3710 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
