Manuel d'utilisation / d'entretien du produit 32612MHD du fabricant Magnasonic
Aller à la page of 25
1-800-663 -5954 For Customer A ssistance Call: 32” High Definition* LCD Television 32612MHD Instruction Manual *Requires HD Sig nal Thank you for your pu rchase of this Magnasonic product. Ple ase read this Instruct ion Manual carefully before using pr oduct to ensure proper us e.
CONTENTS 2. Descriptions of Main Unit and Rem ote -Co ntrol Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2.1. Main Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1. Safety W arnings and Cautions W arning Do not remove the cabinet back from your set. Refer servicing to a qualified service technician. High voltages are used in the operation of this product. W arning T o prevent fire or risk of electric shock, do not expose the main unit to rain or moisture.
Minimum 10c 20c 10c 5cm ! Caution If the television is to be built into a compartme nt or enclosure, the minimum distances must be maintained to allow for proper ventilation. Heat build-up can reduce the service life of your television, and can also be dangerous.
Caution ! When the product is not used for an extended period of time, it is advisable to disconnect the AC power cord from ! A void exposing the main unit to direct sunlight or other source of the heat. Do not stand the television receiver directly on other products which give of f heat, E.
2. Descriptions of Main Unit and Remote-Control Unit 2.1 Main Unit Buttons / Display: Sockets / Main Power Switch: 5.
2.2 Remote-Control Unit 6.
3. Specifications Items Relevant illustrations Active Screen Size 32 inches Screen format 16:9 Number of Pixels 1366×768 T ypical Contrast Ratio 1000:1 Maximum Brightness 500 cd/m² Display colors 16.7M Wide Viewing Angle 170 ° (Horizontal) 170 ° (V ertical) S tandard FCC etc.
.
4. Connection and Prep aration 4.1 Connecting Antenna or Video Facility 1. Use a 75 Ω coaxial cable or 300-75 Ω impedance converter (sold separately) to plug in the antenna input terminal on the rear of the cabinet. 2. Connect the video or audio facility with the video, audio interface on the rear of the cabinet.
4.4 Auto Search the Channels 1. Press the Power On/Off key on the tele vision or the Remote-Control. 2. Press the MENU key on the remote-control unit. The screen displays the Menu OSD. Press the key repeatedly till “TV -CHANNEL” is highlighted in the first main menu.
5.3 TV/A V TV AV SVIDEO YPBPR YPBPR2 HDMI PC 5.4 Channel Up/Down 5.5 Volume Control 5.6 Closed Caption Press CH ▲ or the ▲ key to change Channel Up Press CH ▼ or the ▼ key to change Channel Down Press the VOL + or VOL - or the keys to lower or raise the volume.
5.7 QV Pressing this will quickly swit ched back to the previous channel viewed. 5.8 SCAN Pressing this button will automatic ally scan through the channels. Pressing this button again will stop scan. 5.9 ZOOM Press this key repeatedly to change aspect radio as follows.
5.12 OK The OK key is used to confirm your selection in the menu ， and let you quickly enter the result. 5.13 Picture Mode Press repeatedly to select the picture mode among ST ANDARD, DYNAMIC, SOFT , and PERSONAL. ST ANDARD → DYNA MIC → SOFT → PERSONAL 5.
5.16 CALL 5.17 FREEZE 5.18 BTSC Press it repeatedly to switch among Mono, S tereo and SAP . Press to hold the current state or image. Pressing again releases back to normal state. Pressing displays (1) the name of current t he program or source; (2) Current aspect rati o; (3) Current mts mode; (4) Current picture mode; (5) Current sleep time.
7. MENU OPERA T ION AND FUNCTION DESCRIPTIONS: 7.1. Menu operation under TV , A V , SVIDEO, YPBPR. 7.1.1 PICTURE MENU ： a. The above image is a sample of the display menu. b. The definition of each option: b.1 PICTURE MODE: Set the picture preset to ST ANDARD → DYNAMIC → SOFT → PERSONAL → ST ANDARD by using the keys.
b.6 SHARPNESS: Change the value of the sharpness with the keys, in the range of 0 to 100. b.7 COLOR TONE: Set the color temperature preset to ST ANDARD → WA R M → COOL → ST ANDARD by using the keys. b.8 SCALE: Set the picture size preset to FULL → ZOOM → 4 ： 3 → PA N O R A M A → FULL by using the keys.
b.3 TREBLE: Change the value of the treble with the keys in the rang of 0 to 100. b.4 BALANCE: Change the value of the balance with the keys from -50 to 50. Recommended setting is 0. b.5 MTS: Set the modes of sound processing with the keys to MONO → STEREO → SAP .
b.4 VCHIP: Press the key to enter the password input menu, now enter your password to enter V -CHIP mode. V -CHIP has two American standards (MP AA Rating/ TV Parental Guidelines) and two Canadian standards (Englis h Rating/ French Rating). b.4.1 CHANGE P ASSWORD: Press the keys to enter the password change menu.
b.4.4 MOVIE RA TING: Press the keys to adjust the movie rating to NONE Æ G Æ PG Æ PG13 Æ R Æ NC17 Æ X Æ NONE. G General Audiences PG Parental Guidelines Suggested PG － 13 Parents Strongly Cautioned R Restricted NC － 17 No 17 And Under Admitted X b.
7.1.4. SYSTEM MENU ： SYSTEM MENU a. The above image is a sample of the display menu. b. The definition of each option: b.1 OSD LANGUAGE: Change the language to ENGLISH → FRENCH → POR TUGUESE → SP ANISH → ENGLI SH by using the keys.
b.7 OSD HALFT ONE ： Change the transpa rence of the OSD (it has 9 grades) by using the keys. 7.1.5. CHANNEL MENU ： Only displayed when current source is TV . CHANNEL MENU a. The above image is a sample of the display menu. b. The definition of each option: b.
7.2. MENU UNDER THE SOURCE OF VGA ： 1 . When the system signal source switches to VGA ， there will be a PC mark in the up-right corner of the screen. 2 . In VGA Input Mode ， if there is no signal ， it will dis play NO SY NC in the middle of the screen.
8. T rouble Shooting ： Before arranging for service, first know t he status and then check simply as follows: Problems Check No picture. Check if the power supply is plugged in. Picture is fine, but no audio. Check if the volume control is set to the minimum or mute position.
24.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Magnasonic 32612MHD c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Magnasonic 32612MHD - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Magnasonic 32612MHD, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Magnasonic 32612MHD va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Magnasonic 32612MHD, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Magnasonic 32612MHD.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Magnasonic 32612MHD. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Magnasonic 32612MHD ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
