Manuel d'utilisation / d'entretien du produit 7820-0802-003 du fabricant Lucent Technologies
Aller à la page of 242
APX 8000 ™ /MAX ® TNT/DSLMAX ™ Physical Inte rface Con fi guration Guid e Part Numbe r 7820- 0802 -003 For softwar e versi on 8.0 May 2 000.
Lucent Tec hnologi es Copyright© 2000 Lu cent T echnologies. All rights reserved. This ma terial is protect ed by the c opyright laws of the U nited States and o ther countr ies.
85x11 B ook Temp late (Pr eliminary) iii Customer Service Customer Service provides a variety of op tions for obtaining in formation about L ucent products and s ervices, softwar e upgrades, and tech nical assistance. Finding information and softw are on the Int ernet V isit the W eb site at http://www.
iv 85x11 Book Template (Prelimin ary) support s ervices p rovide har dware and s oftware so lutions to keep y our networ k operati ng at peak perfor mance. For mo re information, call (8 00) 27 2-3634. Othe r telep hone numb ers For a menu of Lucent ’ s services, call (8 00) 27 2-3634.
APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide v Content s Customer Service .......................... ............ ........... ........... ................. ........... ............ ........... ...... iii About This Guide ...........
vi APX 8000/MAX TNT/DSLTNT P hysical Interf ace Configuration Guide Contents Configurin g the APX 8000 for shelf-co ntroller redundan cy ................. ........... ........... .......... 2- 3 Assigning the system IP address ........................
Contents APX 8000/MAX TNT/DSLTNT Physical Interface Configur ation Guide vii Chapter 6 Configuring MultiDSP Cards (MAX TNT , AP X 8 000) .......... ......... .......... ......... .............. ......... ......... 6 -1 Introduction to MultiDSP........
viii APX 8000/MAX TNT/DSLTNT P hysical Interface Configuration Guide Contents Specifying analog encoding f or TAOS unit codecs .................... ........... ................. ........... .. 7-22 Configurin g specialized options.......... ..........
Contents APX 8000/MAX TNT/DSLTNT Physical Interface Configur ation Guide ix Routing pr otocols .............. ........... ................. ........... ............ ........... ........... ................. .. 10-2 RADIUS................ .............
x APX 8000/MAX TNT/DSLTNT P hysic al Interface Configuration Guide Contents Chapter 15 Configuring OC3-A TM Cards (MAX TNT/DSL TNT) .................. ......... ......... .......... .............. ......... .. 15-1 Introduction to OC3-ATM ............
Contents APX 8000/MAX TNT/DSLTNT Physical Interface Configur ation Guide xi Sample Frame Relay IDSL con figuration ..................... ........... ........... ................. ...... 17-22 Configurin g the DSLTNT ..................... ........... .
xii APX 8000/MAX TNT/DSLTNT P hysic al Interface Configuration Guide Contents Start and Stop record s ................. ........... ................. ........... ........... ................. ...... 18-21 Disconnect cause codes ........ ...... ..... .
APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide x iii Figures Figure 13-1 Example of un channelized DS3 slot card application ............ ............ ........... .. 13-1 Figure 14-1 DS3-ATM interface to ATM network .............. ...
.
APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide xv Ta b l e s Table 1-1 Basic TAOS unit config uration tasks ..................... ................ ............ ........... .... 1-2 Table 5-1 Modem configu ration tasks ................
.
APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide xvii About T his Guide What is in t his guide This guide provides the following instr uct ions fo r an APX 8000 ™ , MAX T NT ® , or D.
xviii APX 8000/MAX TNT/DSLTNT P hysical Interface Configuration Guide Documenta tion conv entions • Network security Documentation conventions Following are all the special characters and typogr aph.
Documentat ion se t APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide xix Documentation set The APX 8000/MAX TNT/D SL TNT docum entation set consists of the following manual s.
xx APX 8000/MAX TNT/DSLTNT P hysical Interf ace Configuration Guide Documenta tion set • RADIUS: T AOS RADIUS Guide and Refer ence Describes how to set up a T A OS unit to use the Remote Authenticatio n Dial -In User Service (RADIUS) server and contains a complete r eference to RADIUS attributes.
APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Prelim inary May 9 , 2000 1- 1 1 Performing Basic Configura tion Introduction to basic co nfiguratio n T abl e 1 - 1 lists the sections describ ing the tasks you must perf orm for the T AOS unit basic configuration.
1-2 Preliminary May 9 , 2000 APX 8000/MAX TNT/DSLTNT P hysical Interf ace Configuration Guide Performing Basic Configuration Introduc tion to bas ic config uration T able 1- 1.
Performing Ba sic Configuration Connecti ng to a new unit APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Preliminary May 9, 2000 1- 3 Connecting to a new unit T o communicate with a new T A OS unit, you mu st assign an IP addres s to the shelf controller .
1-4 Preliminary May 9 , 2000 APX 8000/MAX TNT/DSLTNT P hysical Interf ace Configuration Guide Performing Basic Configuration Configu ring the shelf-con troller IP addres s on a nonr edundant unit 4 V erify that the connection and the IP addres s are correct by pinging any d evice on the netw ork.
Performing Ba sic Configuration Settin g the system date APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Preliminary May 9, 2000 1- 5 Setting the system date If the system date displayed on your screen is incor rect, set the correct da te and time with the Date command .
1-6 Preliminary May 9 , 2000 APX 8000/MAX TNT/DSLTNT P hysical Interf ace Configuration Guide Performing Basic Configuration Conf ig uri ng a de fa ult gat eway T o change the log lev el, specify an o.
Performing Ba sic Configuration Pinging the TAO S unit from a local host APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Preliminary May 9, 2000 1- 7 domain-name = "" dns-primary-server = 0.0.0.0 dns-secondary-server = 0.0.0.
1-8 Preliminary May 9 , 2000 APX 8000/MAX TNT/DSLTNT P hysical Interf ace Configuration Guide Performing Basic Configuration Recommen ded basic security m easures Changing the Ad min p assword A user who k nows the passwor d to the Admin level can p erform any o peration on the T AOS unit, i ncluding chan ging th e configurat ion.
Performing Ba sic Configuration Recommen ded basic security m easures APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Preliminary May 9, 2000 1- 9 Following is an example of assigning .
1-10 Preliminary May 9, 2000 APX 8000/MAX TNT/DSLTNT P hysical Interf ace Configuration Guide Performing Basic Configuration Recommen ded basic security m easures T o prevent the T AOS unit router fro.
Performing Ba sic Configuration Recommen ded basic security m easures APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Prelimi nary May 9, 2000 1-1 1 Following are the paramete rs related to SNMP security: SNMP enabled = no read-community = public read-write-community = write enforce-address-security = no read-access-hosts = [ 0.
1-12 Preliminary May 9, 2000 APX 8000/MAX TNT/DSLTNT P hysical Interf ace Configuration Guide Performing Basic Configuration Where to go next In the following example, commands enforce address securi .
APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Preliminary May 9, 2000 2-1 2 Configu ring Sh elf-Contr oller Redundanc y (APX 8000 ) Over view of redu ndan cy op eratio ns The APX 8000 can oper ate with a single shelf contro ller or with two red undant shelf controllers.
2-2 Preliminary May 9, 2000 APX 8000/MAX TNT/DSLTNT Physical Interface Configuration Guide Configuring Shelf-Contr oller Redundancy (APX 8000) Overvie w of redun dancy op erations The controllers next elect the controller that will be primary. The election process is based on a hierarchical list of co mplex criteria.
Configuring Shelf-Controller Redundanc y (APX 8000) Config uring the APX 8000 fo r shelf-c ontroll er redundan cy APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Preliminary May 9, 2000 2- 3 Controller switchover If the primary controller fatals, the seco ndar y contro ller autom a tically takes over as primary controller .
2-4 Preliminary May 9, 2000 APX 8000/MAX TNT/DSLTNT Physical Interface Configuration Guide Configuring Shelf-Contr oller Redundancy (APX 8000) Configu ring the AP X 8000 for shelf-c ontroller redundan.
Configuring Shelf-Controller Redundanc y (APX 8000) Config uring the APX 8000 fo r shelf-c ontroll er redundan cy APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Preliminary May 9, 2000 2- 5 admin> set ip-address = 192.
2-6 Preliminary May 9, 2000 APX 8000/MAX TNT/DSLTNT Physical Interface Configuration Guide Configuring Shelf-Contr oller Redundancy (APX 8000) Configu ring the AP X 8000 for shelf-c ontroller redundan.
Configuring Shelf-Controller Redundanc y (APX 8000) Config uring the APX 8000 fo r shelf-c ontroll er redundan cy APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Preliminary May 9, 200.
2-8 Preliminary May 9, 2000 APX 8000/MAX TNT/DSLTNT Physical Interface Configuration Guide Configuring Shelf-Contr oller Redundancy (APX 8000) Configu ring the AP X 8000 for shelf-c ontroller redundan.
Configuring Shelf-Controller Redundanc y (APX 8000) Obtaini ng status informa tion about redundant shelf control lers APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Preliminary May 9, 2000 2- 9 the default security level is reactiv ated .
2-10 Preliminary May 9, 2000 APX 8000/MAX TNT/DSLTNT P hysical Interface Configuration Guide Configuring Shelf-Contr oller Redundancy (APX 8000) Obtaini ng status informat ion about r edundant shelf c.
Configuring Shelf-Controller Redundanc y (APX 8000) Obtaini ng status informa tion about redundant shelf control lers APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Prelimi nary May 9.
.
APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Prelim inary May 9 , 2000 3- 1 3 Configur in g the Therma l Profile for Fa n T ray Operat ions (APX 80 00) Overview of the Thermal p rof.
3-2 Preliminary May 9 , 2000 APX 8000/MAX TNT/DSLTNT P hysical Interf ace Configuration Guide Configuring the Thermal Pr ofile for Fan Tray Operations (APX 8000) Overvie w of the Th ermal prof ile for.
Configuring the Thermal Profile for Fan Tray Operations (APX 8000) Overv iew of the The rmal profi le for fan tr ay operati ons APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Prelimin.
3-4 Preliminary May 9 , 2000 APX 8000/MAX TNT/DSLTNT P hysical Interf ace Configuration Guide Configuring the Thermal Pr ofile for Fan Tray Operations (APX 8000) Thermal s tatus re porting Thermal status reporting A power -on self test ( POST) is ru n on the f an tray of the APX 800 0 during the BOOT l oader and during the operational load.
Configuring the Thermal Profile for Fan Tray Operations (APX 8000) Thermal status re portin g APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Preliminary May 9, 2000 3- 5 Thermalst atus command The thermalstatus comman d displays a number of temperature-r elated values to sh ow the over all thermal s tatus of the unit.
.
APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Prelim inary May 9 , 2000 4- 1 4 Configu ring Et hernet Ca rds Introduction to Ethernet slot cards This chapter explains how to install and co nfigure the Ethern et slot cards.
4-2 Preliminary May 9 , 2000 APX 8000/MAX TNT/DSLTNT P hysical Interf ace Configuration Guide Configuring Ethernet Cards Overvie w of Ether net co nfi gurati on Upgrading to the Ethernet-2 and Et hern.
Configuring Ethernet Cards Config uring duple x mode on the 100 Mbps Ethe rnet port APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Preliminary May 9, 2000 4- 3 5 08/06/1998 17:11:46 {.
.
APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Prelim inary May 9 , 2000 5- 1 5 Confi g u ring Series5 6 II an d III Modem and Hybrid Access Card s T ypically , Series56 II ™ and Se r ies 56 III Di gital M odem sl ot car ds do n ot requ ire a ny configurat ion.
5-2 Preliminary May 9 , 2000 APX 8000/MAX TNT/DSLTNT P hysical Interf ace Configuration Guide Configuring Series56 II and III Modem and Hybrid Access Cards Specify ing modem negotiati on settin gs Spe.
Configuring Series56 II and III Modem and Hy brid Access Card s Speci fying modem modulatio n for Seri es56 II and III modem c ards APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Preliminary May 9, 2000 5- 3 2 List the parameters in the Modem-Conf ig uration subprofile.
5-4 Preliminary May 9 , 2000 APX 8000/MAX TNT/DSLTNT P hysical Interf ace Configuration Guide Configuring Series56 II and III Modem and Hybrid Access Cards Series56 II and III Call-Rou te profil es rate and the A T -Answer-S tring par ameter specifies a dif ferent baud rate, the answer string overwrites the configured maxim um b aud rate.
Configuring Series56 II and III Modem and Hy brid Access Card s Prevent ing Seri es56 II an d III ca rds from d elayi ng Frame R elay c onnections APX 8000/MAX TNT/DSLTNT Physical Interf ace Configura.
.
APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Preliminary May 9, 2000 6-1 6 Configuring Mult iDSP Cards (MAX TNT , APX 8000) Introduction to MultiDSP The MultiDSP card is a highly versatile, digital signal processor (DSP ) slot card for MAX TNT and APX 8000 units.
6-2 Preliminary May 9, 2000 APX 8000/MAX TNT/DSLTNT Physical Interface Configuration Guide Configuring MultiDSP Cards (MAX TNT, APX 8000) Introduc tion to Mul tiDSP 48-port MultiDSP card The 48-port MultiDSP card supports up to 48 ports of servi ce.
Configuring MultiDSP Cards (MAX TNT, APX 8000) Suppo rted Mult iDSP ser vices APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Preliminary May 9, 2000 6- 3 Card configuration constraints The following constr aints affect th e mixing of slo t cards in MAX TNT and APX 8000 units .
6-4 Preliminary May 9, 2000 APX 8000/MAX TNT/DSLTNT Physical Interface Configuration Guide Configuring MultiDSP Cards (MAX TNT, APX 8000) Suppo rted Mult iDSP s ervic es V .
Configuring MultiDSP Cards (MAX TNT, APX 8000) Obtainin g status information about a MultiDSP card APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Preliminary May 9, 2000 6- 5 A V oI P so ft ware li cense is required for MultiDS P support of the V oIP service.
6-6 Preliminary May 9, 2000 APX 8000/MAX TNT/DSLTNT Physical Interface Configuration Guide Configuring MultiDSP Cards (MAX TNT, APX 8000) Configu ring a M ultiD SP card For example, enter the followin.
Configuring MultiDSP Cards (MAX TNT, APX 8000) Configur ing a Mul tiDSP c ard APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Preliminary May 9, 2000 6- 7 • V erifying that all other con figurations associated with the Mu ltiDSP services have been performed.
6-8 Preliminary May 9, 2000 APX 8000/MAX TNT/DSLTNT Physical Interface Configuration Guide Configuring MultiDSP Cards (MAX TNT, APX 8000) Configu ring a M ultiD SP card ... phs-support = yes ... voip-enabled = no ... v110-enabled = disabled ... rtfax-enabled = no .
Configuring MultiDSP Cards (MAX TNT, APX 8000) Configur ing a Mul tiDSP c ard APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Preliminary May 9, 2000 6- 9 The following example shows a.
6-10 Preliminary May 9, 2000 APX 8000/MAX TNT/DSLTNT P hysical Interface Configuration Guide Configuring MultiDSP Cards (MAX TNT, APX 8000) Configu ring a M ultiD SP card Viewing call -routing d ataba.
Configuring MultiDSP Cards (MAX TNT, APX 8000) Configur ing a Mul tiDSP c ard APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Prelimi nary May 9, 20 00 6-1 1 admin> slot -r 1 5 admi.
.
APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Prelim inary May 9 , 2000 7- 1 7 Configur in g T1 Cards Introduction to T1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7- 2 Overview of T1 co nfiguration .
7-2 Preliminary May 9 , 2000 APX 8000/MAX TNT/DSLTNT P hysical Interf ace Configuration Guide Configuring T1 Cards Introductio n to T1 Introduction to T1 A T1 line consists of 24 channels. Each channel can transmit and receive data or digitized voice.
Configuring T1 Ca rds Overvi ew of T1 conf iguratio n APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Preliminary May 9, 2000 7- 3 Overview of T1 conf iguration T able 7-1 lists t he secti on s des cri bi ng com mon t ask s you mi g ht hav e to perform t o co nfi g ure a T1 line.
7-4 Preliminary May 9 , 2000 APX 8000/MAX TNT/DSLTNT P hysical Interf ace Configuration Guide Configuring T1 Cards Over view of T1 conf igur ati on “ Confi guring i nband robbed-bi t signaling ” on pag e 7-1 1 If the lines use inband signaling, chan ge the sign aling mode t o robbed bit and specify the type of robbed bit signalin g to use.
Configuring T1 Ca rds Overvi ew of T1 conf iguratio n APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Preliminary May 9, 2000 7- 5 “ Confi guring na iled channels ” on page 7-21 Y ou must assig n a nailed ch annel to a group to m ake it available for use.
7-6 Preliminary May 9 , 2000 APX 8000/MAX TNT/DSLTNT P hysical Interf ace Configuration Guide Configuring T1 Cards Making a profile the working pr ofile Making a profile th e working profile When the T AOS unit detects that a T1 card has been installed, it creates a default T1 p rofile for each of the eigh t lines on the card.
Configuring T1 Ca rds Assi gning nam es to T1 li ne profil es APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Preliminary May 9, 2000 7- 7 nfas-group-id = 0 nfas-id = 0 incoming-call-h.
7-8 Preliminary May 9 , 2000 APX 8000/MAX TNT/DSLTNT P hysical Interf ace Configuration Guide Configuring T1 Cards Enablin g a line Enablin g a line By default each T1 line is disabled.
Configuring T1 Ca rds Configur ing ISDN network-s ide emula tion APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Preliminary May 9, 2000 7- 9 admin> set line switch-type = switchtyp.
7-10 Preliminary May 9, 2000 APX 8000/MAX TNT/DSLTNT P hysical Interf ace Configuration Guide Configuring T1 Cards Conf ig ur in g over lap r eceiv ing on PRI line s trailing-digits = 2 t302-timer = 1.
Configuring T1 Ca rds Config uring in band robbed- bit sig naling APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Prelimi nary May 9, 2000 7-1 1 The following exa mple enables overlap .
7-12 Preliminary May 9, 2000 APX 8000/MAX TNT/DSLTNT P hysical Interf ace Configuration Guide Configuring T1 Cards Configu ring inban d robbed- bit signal ing accounting. (On lines configu red fo r PRI sign aling, this inform ation is pr esented as part of the call setup message an d does not require special configur ation on the T AOS unit.
Configuring T1 Ca rds Conf ig uri ng NF AS APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Prelimi nary May 9, 2000 7-1 3 Configuring NF AS A group of T1 lines configur ed for NF AS signaling shares a D channe l.
7-14 Preliminary May 9, 2000 APX 8000/MAX TNT/DSLTNT P hysical Interf ace Configuration Guide Configuring T1 Cards Conf ig uri ng NF AS admin> read t1 {1 2 1} T1/{ shelf-1 slot-2 1 } read admin>.
Configuring T1 Ca rds Configur ing T1 R1 and R1-Modi fied (Taiw an) with A NI and cal led-number processin g APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Prelimi nary May 9, 2000 7-.
7-16 Preliminary May 9, 2000 APX 8000/MAX TNT/DSLTNT P hysical Interf ace Configuration Guide Configuring T1 Cards Configur ing T1 R1 and R1-Modi fied (Taiwa n) with ANI a nd called- number proc essing the switch, you can also specify how long it waits before send ing the request, and ho w long the ANIR sig nal l asts .
Configuring T1 Ca rds Config uring clo cking APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Prelimi nary May 9, 2000 7-1 7 Configuring clocking Y ou can configure the T AOS unit to use any of th e T1 lines as a ma ster phase-locked loo p (PLL) clock source f or synchro nous connections for an en tire sys tem.
7-18 Preliminary May 9, 2000 APX 8000/MAX TNT/DSLTNT P hysical Interf ace Configuration Guide Configuring T1 Cards Configu ring ch annel us age T o specify CSU settings, proceed as in the following examp le after reading in the line ’ s T 1 profile: admin> set front-end-type = csu admin> set csu-build-out = 7.
Configuring T1 Ca rds Assi gning tel ephone num bers to swi tched ch annels APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Prelimi nary May 9, 2000 7-1 9 Assigning telephone numbers to switched channels Channel assignment s typicall y specify add -on nu mbers, not fu ll telep hone nu mbers.
7-20 Preliminary May 9, 2000 APX 8000/MAX TNT/DSLTNT P hysical Interf ace Configuration Guide Configuring T1 Cards Configu ring trunk gr oups admin> set 13 phone = 72 admin> write Configuring tr.
Configuring T1 Ca rds Configur ing nail ed channe ls APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Prelimi nary May 9, 2000 7-2 1 phone-number = "" call-route-info = { any-shelf any-slot 0 } nailed-group = 0 admin> set trunk-group = 4 admin> write Note: Command h istory is very useful for repeat ing comm ands.
7-22 Preliminary May 9, 2000 APX 8000/MAX TNT/DSLTNT P hysical Interf ace Configuration Guide Configuring T1 Cards Specify ing anal og encoding f or TAOS unit code cs • Clock-Source set to Eligible .
Configuring T1 Ca rds Sample T1 conf igurat ion APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Prelimi nary May 9, 2000 7-2 3 Sample T1 config uration This section provides an example of h ow to configure a T1 slot card. The example uses the following setu p: • The card is in shelf 1, slot 2.
7-24 Preliminary May 9, 2000 APX 8000/MAX TNT/DSLTNT P hysical Interf ace Configuration Guide Configuring T1 Cards Default Call-Route p rofiles 4 Enable the line: admin> set enabled = yes 5 Set the.
APX 8000 Physical Interface Configuration Guide Preli minary M ay 9, 2000 8-1 8 Configur in g T1 FrameLine Card s (MAX TNT , DSL TNT) Introduction to T1 FrameLine The T1 FrameLine slot card provides 10 unchannelized T1 lines, each of which can be used f or one nailed connection.
8-2 Preliminary May 9 , 2000 APX 8000 Physical Interface Configuration Guide Configuring T1 FrameLine Cards (MAX TNT, DSLTNT) Over view of T1 Fra meLi n e co nfi gur ati on • Multilink Protocol (MP) and Multil ink Protocol Plus (MP+) are no t su ppo rted.
Configuring T1 FrameLine Cards (MAX TNT, DSLTNT) Configur ing the c lock sourc e APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Preliminary May 9, 2000 8- 3 – Call- by-Call – Chan.
.
APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Prelim inary May 9 , 2000 9- 1 9 Configu ring E1 Cards Introduction to E1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9- 2 Overview of E1 co nfiguration .
9-2 Preliminary May 9 , 2000 APX 8000/MAX TNT/DSLTNT P hysical Interf ace Configuration Guide Configuring E1 Cards Introduc tion to E1 Introduction to E1 An E1 line suppor ts 32 64Kbps channels , each of which can be used to transm it and receive data or d igitiz ed voice.
Configuring E1 Cards Overvi ew of E1 configu ration APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Preliminary May 9, 2000 9- 3 “ Confi guring a back-t o-back connection ” on page 9-7 A back-to-back connection lets yo u connect two T AOS units to one an other over a crossover E1 cable.
9-4 Preliminary May 9 , 2000 APX 8000/MAX TNT/DSLTNT P hysical Interf ace Configuration Guide Configuring E1 Cards Understa ndi ng co nfig urati on re qui remen ts Understanding co nfi guration requir.
Configuring E1 Cards Making a profil e the work ing prof ile APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Preliminary May 9, 2000 9- 5 • Rate adapt ion pr otocol — DASS 2 and DPNSS only (X.
9-6 Preliminary May 9 , 2000 APX 8000/MAX TNT/DSLTNT P hysical Interf ace Configuration Guide Configuring E1 Cards Assign ing names to E1 li ne profiles line-interface = { no none g703 eligible middle.
Configuring E1 Cards Enabling a line APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Preliminary May 9, 2000 9- 7 admin> read e1 {1 12 0} admin> set name = E1 Trunk admin> wri.
9-8 Preliminary May 9 , 2000 APX 8000/MAX TNT/DSLTNT P hysical Interf ace Configuration Guide Configuring E1 Cards Specify ing E1 s ignalin g admin> set line frame-type = [ G703 | 2DS | D4 | esf ] .
Configuring E1 Cards Configur ing ISDN network-s ide emula tion APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Preliminary May 9, 2000 9- 9 Configure ISDN PRI service as in the follow.
9-10 Preliminary May 9, 2000 APX 8000/MAX TNT/DSLTNT P hysical Interf ace Configuration Guide Configuring E1 Cards Configu ring E1 R1 signalin g ISDN emulation enables you to build, s end, receive, and p rocess ISDN data. ISDN mon itoring, on the other h and, all ows you on ly to decode the ISDN data.
Configuring E1 Cards Configu ring E1 R2 s ignalin g APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Prelimi nary May 9, 2000 9-1 1 T o configure the line f or R2 signaling, p roceed as.
9-12 Preliminary May 9, 2000 APX 8000/MAX TNT/DSLTNT P hysical Interf ace Configuration Guide Configuring E1 Cards Conf ig urin g DP NSS si gnal ing admin> list line enabled=no frame-type=g703 cloc.
Configuring E1 Cards Configur ing ove rlap rece iving on PRI li nes APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Prelimi nary May 9, 2000 9-1 3 admin> set loop-avoidance = 7 admi.
9-14 Preliminary May 9, 2000 APX 8000/MAX TNT/DSLTNT P hysical Interf ace Configuration Guide Configuring E1 Cards Configu ring ch annel us age Configuring channel usage Y ou must specify how each o f the 32 channels of an E1 line is to be us ed. By defau lt, E1 channels are config ured as switched.
Configuring E1 Cards Configur ing nail ed channe ls APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Prelimi nary May 9, 2000 9-1 5 idle-logout = 0 parallel-dialing = 2 single-file-inco.
9-16 Preliminary May 9, 2000 APX 8000/MAX TNT/DSLTNT P hysical Interf ace Configuration Guide Configuring E1 Cards Specify ing anal og encoding f or TAOS unit code cs When you conf igure Connection profiles to use the leas ed connection, y ou must specify the Nailed-G roup num ber in the T elco-Opti ons subp rofile.
Configuring E1 Cards Default Cal l-Route p rofiles APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Prelimi nary May 9, 2000 9-1 7 This defaul t Call- Route pro file rout es outbo und trun k calls t o any line o n the card. T o handle inbound m odem and LAN-sessio n traf fic, you must con figure speci fic call ro utes.
.
APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide 10-1 10 Configur in g E1 Frame Line Cards (MAX TNT , DSL TNT) Introduction to E1 FrameLine The E1 FrameLine sl ot card provides 1 0 E1 FrameLine lines, each of which can be used for one nailed connection.
10-2 Preliminary May 9, 2000 APX 8000/MAX TNT/DSLTNT P hysical Interf ace Configuration Guide Configuring E1 FrameLine Cards (MAX TNT, DSLTNT) Overvie w of E1 FrameL ine confi gurat ion PPP The E1 FrameLine sl ot card supports PPP as follows : • Only one PPP s essi on per li ne.
Configuring E1 FrameLine Cards (MAX TNT, DSLTNT) Over vie w of E 1 Fra meL ine con fig ur ation APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide 10-3 • Channel-Usage for chan nel must be set to Unus ed-Channel. • For all other channels, Channel-Us age must be set to either Unused-Chann el or Nailed-6 4-Channel.
10-4 Preliminary May 9, 2000 APX 8000/MAX TNT/DSLTNT P hysical Interf ace Configuration Guide Configuring E1 FrameLine Cards (MAX TNT, DSLTNT) Adminis trative profile s for E1 F rameLin e hunt-grp-pho.
Configuring E1 FrameLine Cards (MAX TNT, DSLTNT) Adminis tr ati v e comm and s and sta tus infor ma tio n APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide 10-5 Admin-S t ate profile Whe.
10-6 Preliminary May 9, 2000 APX 8000/MAX TNT/DSLTNT P hysical Interf ace Configuration Guide Configuring E1 FrameLine Cards (MAX TNT, DSLTNT) Conf ig uri ng th e c lock sou r ce Conf iguring the cloc.
APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Prel iminary M ay 9, 2000 11- 1 11 Configur in g T3 Cards Introduction to T3 The T3 slot card is a communications circuit composed of seven DS2s, each o f which includes four DS1 s, each of w hich in t urn is compo sed of 24 DS0s, for a total of 672 DS0 chan nels.
11-2 Preliminary May 9, 2000 APX 8000/MAX TNT/DSLTNT P hysical Interf ace Configuration Guide Configuring T3 Cards Understa nding T3 c onfiguration requir ements For complete infor mation about the as sociated parameters, see the APX 8 000/MAX TNT/DSLTNT Reference .
Configuring T3 Ca rds Unders tanding T3 slot c ard profil es APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Prelimi nary May 9, 2000 11- 3 Understanding T3 slot card profiles When the.
11-4 Preliminary May 9, 2000 APX 8000/MAX TNT/DSLTNT P hysical Interf ace Configuration Guide Configuring T3 Cards Assign ing a name to a T3 p rofile 13 02/28/1997 10:54:49 { { { she lf-1 slot-8 0 } 0.
Configuring T3 Ca rds Enabling a line APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Prelimi nary May 9, 2000 11- 5 admin> read t3 {1 12 0} admin> set name = T3 Trunk admin> .
.
APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Prel iminary May 9, 2000 12- 1 12 Confi gurin g Serial W AN (SW AN) Cards (MAX TNT, DSL TNT) Introduction to SW AN The Serial W AN (SW AN) card, has four V .35 serial ports, which can be used for nailed Frame Relay connections.
12-2 Preliminary May 9, 2000 APX 8000/MAX TNT/DSLTNT P hysical Interface Configuration Guide Configuring Serial WAN (SWAN) Cards (MAX TNT, DSLTNT) Understa nding SW AN card configurati on requi rements For complete infor mation about the associated param eters, see the APX 8000 /MAX TNT/DSLTNT Reference .
Configuring Serial WAN (SWAN) Cards (MAX TNT, DSLTNT) Making a profil e the work ing prof ile APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Prelimi nary May 9, 20 00 12- 3 Making a p.
12-4 Preliminary May 9, 2000 APX 8000/MAX TNT/DSLTNT P hysical Interface Configuration Guide Configuring Serial WAN (SWAN) Cards (MAX TNT, DSLTNT) Assign ing a name to a SWA N profil e clocking clock-.
Configuring Serial WAN (SWAN) Cards (MAX TNT, DSLTNT) Spec ifyi ng th e SWAN i n ter nal cl ock speed APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Prelimi nary May 9, 20 00 12- 5 Sp.
12-6 Preliminary May 9, 2000 APX 8000/MAX TNT/DSLTNT P hysical Interface Configuration Guide Configuring Serial WAN (SWAN) Cards (MAX TNT, DSLTNT) Frame Rela y co nfi gur atio n divider = 1 exp = 2 5 .
APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide 13 Confi gur ing Unchannelized DS3 Cards (MAX TNT , DSL TNT) Introduction to unch annelized DS3 The unchannelized DS3 slot card (UDS3), supported on the MAX TNT and the DSL TNT, is a 44.
13-2 Preliminary May 9, 2000 APX 8000/MAX TNT/DSLTNT P hysical Interf ace Configuration Guide Configuring Unchannelized DS3 Cards (MAX TNT, DSLTNT) Overvie w of uncha nnelized DS3 configu ration Overv.
Configuring Unchannelized DS3 Cards (MAX TNT, DSLTNT) Conf ig uri ng th e UD S3 p hysi cal lin k APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Prelimi nary May 9, 2000 13- 3 By default, each un channelized DS3 line is disa bled. When the DS3 interface is dis abled, it transmits the DS3 Idle Sig n al to the far end.
.
APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide 14-1 14 Configu r ing DS3 -A T M Cards Introduction DS3-A TM The DS3-A TM cards (DS3-A TM and DS3- A TM2) suppo rt one 44.736 Mbps interface fo r connecting to o ne A TM switch. At a minimum, yo u must enable the line and specify a n ailed group.
14-2 APX 8000/MAX TNT/DSLTNT Physical Interface Configuration Guide Configuring DS3-ATM Cards Over view of DS 3-AT M set tin gs [in DS3-ATM/{ any-shelf any-slot 0 }:l ine-config] trunk-group = 9 naile.
Configuring DS3-ATM Cards Examp les of DS3 -ATM config urations APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide 14-3 Examples of DS3-A TM c onfigurations The following set of commands enables a DS3-A TM interface in slot 12 and assigns the nailed group nu mber 1 1 1.
14-4 APX 8000/MAX TNT/DSLTNT Physical Interface Configuration Guide Configuring DS3-ATM Cards Example s of DS3-AT M confi guration s Looping back the line T o diagnose possible line pr oblems, you can loop back the DS3-A TM interface by using the Loopback p arameter in the line profile.
APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Prel iminary May 9, 2000 15- 1 15 Configu r in g OC3-A TM Cards (MAX TNT/DSL TNT) Introduction to OC3-A TM An OC3-A TM card pr ovides one 155 .52Mbps interface f or connecting to an A TM switch.
15-2 Preliminary May 9, 2000 APX 8000/MAX TNT/DSLTNT P hysical Interface Configuration Guide Configuring OC3-ATM Cards (MAX TNT/DSLTNT) Over view o f O C3-A TM s ett ing s rx-descramble-disabled = no .
Configuring OC3-ATM Cards (MAX TNT/DSLTNT) Using O C3-ATM p orts as a clock source APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Prelimi nary May 9, 20 00 15- 3 Using OC3 -A TM ports.
15-4 Preliminary May 9, 2000 APX 8000/MAX TNT/DSLTNT P hysical Interface Configuration Guide Configuring OC3-ATM Cards (MAX TNT/DSLTNT) Example of an OC3 -ATM con figur ation For example, the f ollowing commands configure an OC3-A TM port as an eligible clock source.
APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Prel iminary M ay 9, 2000 16- 1 16 Configu ring ST M-0 Ca rds Introduction to STM-0 The Synch ronous T ransport Mo dule (STM)-0 ca rd is an o ptical 51 .85Mbps com munication circuit designed to be used with an approved signaling gateway .
16-2 Preliminary May 9, 2000 APX 8000/MAX TNT/DSLTNT P hysical Interf ace Configuration Guide Configuring STM-0 Cards Usi ng S TM an d T1 pr ofiles Using STM and T1 profiles When the T AO S unit first detects the pr esence of an STM-0 card, it creates a default STM profile for the card as well as 28 T1 p rofiles for each component T1 line.
Configuring STM-0 Cards Sample S TM-0 con figurati ons APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Prelimi nary May 9, 2000 16- 3 Example of configuring a T1 dat a trunk The follow.
.
APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Prel iminary May 9, 2000 17- 1 17 Configu r in g DSL Connections (DSL TNT) Introduction to DSL technologies Three types of Digital Subscriber Line (DSL) cards are available for the DSL TNT.
17-2 Preliminary May 9, 2000 APX 8000/MAX TNT/DSLTNT P hysical Interface Configuration Guide Configuring DSL Connections (DSL TNT) Introduc tion to DSL technolo gies The IDSL line card pr ovides the f.
Configuring DSL Connections (DSLTNT) Introduc tion to DSL te chnologi es APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Prelimi nary May 9, 20 00 17- 3 SDSL overview The SDSL card suppor ts symmetric data tran sfer rates of 768 Kbps for a distance of up to 12,000 f eet (3.
17-4 Preliminary May 9, 2000 APX 8000/MAX TNT/DSLTNT P hysical Interface Configuration Guide Configuring DSL Connections (DSL TNT) DSL confi guration For complete details o f configuring authen ticati.
Configuring DSL Connections (DSLTNT) Configur ing nail ed connec tions APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Prelimi nary May 9, 20 00 17- 5 • Set the Dial # parameter in the Configure prof ile to the DS L po rt number, which in the case of a single DSLPipe is always 1.
17-6 Preliminary May 9, 2000 APX 8000/MAX TNT/DSLTNT P hysical Interface Configuration Guide Configuring DSL Connections (DSL TNT) Conf ig uri ng d ata t ra n s fer rate s Configuring data transfer rates Y ou can configure DSL upstream and d ownstream rates in the line p rofiles fo r each card, and in Connection or RADIUS profiles.
Configuring DSL Connections (DSLTNT) Config uring da ta transf er rates APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Prelimi nary May 9, 20 00 17- 7 For example, if the transceiver .
17-8 Preliminary May 9, 2000 APX 8000/MAX TNT/DSLTNT P hysical Interface Configuration Guide Configuring DSL Connections (DSL TNT) Conf ig uri ng d ata t ra n s fer rate s T o configure the max imum t.
Configuring DSL Connections (DSLTNT) Config uring da ta transf er rates APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Prelimi nary May 9, 20 00 17- 9 For more information about thes e parameters, see the APX 8000/MAX TNT/DSL TNT Refer ence .
17-10 Preliminary May 9, 200 0 APX 8000/MAX TNT/DSLTNT Physical Interface Configuration Guide Configuring DSL Connections (DSL TNT) Conf ig uri ng d ata t ra n s fer rate s admin> set session ses-r.
Configuring DSL Connections (DSLTNT) Config uring da ta transf er rates APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Preliminary May 9, 2000 17 -11 LOG info, Shelf 1, Controller, Ti.
17-12 Preliminary May 9, 200 0 APX 8000/MAX TNT/DSLTNT Physical Interface Configuration Guide Configuring DSL Connections (DSL TNT) Configu ring DSL Pipe Plug a nd Play LOG info, Shelf 1, Controller, .
Configuring DSL Connections (DSLTNT) Configur ing DSLP ipe Plug and Play APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Preliminary May 9, 2000 17 -13 Figur e 1 7-1.
17-14 Preliminary May 9, 200 0 APX 8000/MAX TNT/DSLTNT Physical Interface Configuration Guide Configuring DSL Connections (DSL TNT) Configu ring DSL Pipe Plug a nd Play TFTP Host Name=host-1.abc.com Boot File Path=/tftpboot/config For a Pipeline unit to op erate as a DHCP server , DHCP Spoofing and Always Spoof must be set to Y es.
Configuring DSL Connections (DSLTNT) Configur ing DSLP ipe Plug and Play APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Preliminary May 9, 2000 17 -15 Configuring the DSL TNT DSLPipe .
17-16 Preliminary May 9, 200 0 APX 8000/MAX TNT/DSLTNT Physical Interface Configuration Guide Configuring DSL Connections (DSL TNT) Configu ring DSL Pipe Plug a nd Play 1 Read in the SDSL prof ile.
Configuring DSL Connections (DSLTNT) Configu ring IDSL v oice connec tions APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Preliminary May 9, 2000 17 -17 6 W r ite th e profile: admin&.
17-18 Preliminary May 9, 200 0 APX 8000/MAX TNT/DSLTNT Physical Interface Configuration Guide Configuring DSL Connections (DSL TNT) Conf ig ur in g IDSL voic e conn ect ions Figur e 17-2.
Configuring DSL Connections (DSLTNT) Configu ring IDSL v oice connec tions APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Preliminary May 9, 2000 17 -19 1 Read the IDSL pro file the remote user is connected to.
17-20 Preliminary May 9, 200 0 APX 8000/MAX TNT/DSLTNT Physical Interface Configuration Guide Configuring DSL Connections (DSL TNT) Conf ig ur in g IDSL voic e conn ect ions remote-address = 0.0.0.0/0 local-address = 0.0.0.0/0 .. .. 5 Specify the Pipeline IP addr ess: admin> set remote-address=192.
Configuring DSL Connections (DSLTNT) Configu ring IDSL v oice connec tions APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Preliminary May 9, 2000 17 -21 techpubs-lab-25> list line-.
17-22 Preliminary May 9, 200 0 APX 8000/MAX TNT/DSLTNT Physical Interface Configuration Guide Configuring DSL Connections (DSL TNT) Sample DS L config urations – My Name= buffer – My Addr= 192.1.2.1/24 – Rem Name= bufferstnt – Rem Addr= 192.1.
Configuring DSL Connections (DSLTNT) Sample DS L config urations APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Preliminary May 9, 2000 17 -23 Configuri ng the DSL TNT This example assumes the DSL TNT has already been configured with the followin g information: • IP address of 192 .
17-24 Preliminary May 9, 200 0 APX 8000/MAX TNT/DSLTNT Physical Interface Configuration Guide Configuring DSL Connections (DSL TNT) Sample DS L config urations admin> write Confi gu rin g the ID SL.
Configuring DSL Connections (DSLTNT) Sample DS L config urations APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Preliminary May 9, 2000 17 -25 admin> write Configu ring a static ro.
17-26 Preliminary May 9, 200 0 APX 8000/MAX TNT/DSLTNT Physical Interface Configuration Guide Configuring DSL Connections (DSL TNT) Sample DS L config urations – Name= idsl-fr – Active= Yes – Call T ype = Nailed – Nailed Grp= 1 3 Exit the Frame R elay profile and s ave your chan ges.
Configuring DSL Connections (DSLTNT) Sample DS L config urations APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Preliminary May 9, 2000 17 -27 Confi gur ing t he ADSL prof ile T o con.
17-28 Preliminary May 9, 200 0 APX 8000/MAX TNT/DSLTNT Physical Interface Configuration Guide Configuring DSL Connections (DSL TNT) Sample DS L config urations 6 V erify that IP routing is enabl ed (t.
Configuring DSL Connections (DSLTNT) Sample DS L config urations APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Preliminary May 9, 2000 17 -29 2 Specify the following valu es: – Chan Usage= Leased/Unused – My Name= dslpipe – My Addr= 10.
17-30 Preliminary May 9, 200 0 APX 8000/MAX TNT/DSLTNT Physical Interface Configuration Guide Configuring DSL Connections (DSL TNT) Sample DS L config urations Figur e 17-5.
Configuring DSL Connections (DSLTNT) Sample DS L config urations APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Preliminary May 9, 2000 17 -31 admin> set local-address=192.168.23.142/30 7 List the subm enu for Frame Relay optio ns: admin> list .
17-32 Preliminary May 9, 200 0 APX 8000/MAX TNT/DSLTNT Physical Interface Configuration Guide Configuring DSL Connections (DSL TNT) Sample DS L config urations Confi gur ing t he SDSL prof ile T o configure the SDSL profile : 1 Read in the SDSL prof ile.
Configuring DSL Connections (DSLTNT) Sample DS L config urations APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Preliminary May 9, 2000 17 -33 Conf igur ing t he D SLPip e-S This section provides an example of co nfiguring the SDSL Pipelin e (DSLPipe-S).
17-34 Preliminary May 9, 200 0 APX 8000/MAX TNT/DSLTNT Physical Interface Configuration Guide Configuring DSL Connections (DSL TNT) Sample DS L config urations 2 Specify the following valu es: – Nam.
Configuring DSL Connections (DSLTNT) Sample DS L config urations APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Preliminary May 9, 2000 17 -35 3 Specify the encapsulation ty pe as Fra.
17-36 Preliminary May 9, 200 0 APX 8000/MAX TNT/DSLTNT Physical Interface Configuration Guide Configuring DSL Connections (DSL TNT) Sample DS L config urations Confi gur ing t he SDSL prof ile T o configure the SDSL profile : 1 Read in the SDSL prof ile.
Configuring DSL Connections (DSLTNT) Sample DS L config urations APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Preliminary May 9, 2000 17 -37 Before you configure the Pip e lin e, make sure of the following: • The PC connected to the Pipeline has an I P address on the s ame subnet as the Pipeline.
.
APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Prel iminary M ay 9, 2000 18- 1 18 Signali ng System 7 (SS7) Introduction to SS7 Signalin g S yst em 7 ( SS7) i s an i ntern ationall y st and ardi zed gener a l-pur pos e co mmon -chan nel signaling system designed for use ov er a variety o f digital circuit -switched net works .
18-2 Preliminary May 9, 2000 APX 8000/MAX TNT/DSLTNT P hysical Interf ace Configuration Guide Signaling System 7 (SS7 ) System requireme nts for SS7 operatio ns System requirements for SS7 oper ations A T AOS unit config ured for SS7 in communication with an SS7 signaling gateway is a service switching point (SSP) .
Signaling System 7 ( SS7) System requirem ents for SS 7 operations APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Prelimi nary May 9, 2000 18- 3 T AOS unit as te rminator of voice and dat a calls in an SS 7 network W ith the IPDC license, the T AO S unit can communicate with th e signaling g ateway by means of IPDC.
18-4 Preliminary May 9, 2000 APX 8000/MAX TNT/DSLTNT P hysical Interf ace Configuration Guide Signaling System 7 (SS7 ) Configu ring an SS 7 signal ing gateway See MultiV oice for MAX TNT Configuration Guide for a m ore detailed des cription of how V oIP calls are processed by IPDC.
Signaling System 7 ( SS7) Configuring an SS7 s ignaling gat eway APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Prelimi nary May 9, 2000 18- 5 Settings in the SS7-Gateway profile con figure the signaling interf ace. The T A OS unit resets the signaling link whenever changes ar e written to the profile.
18-6 Preliminary May 9, 2000 APX 8000/MAX TNT/DSLTNT P hysical Interf ace Configuration Guide Signaling System 7 (SS7 ) Configu ring an SS 7 signal ing gateway Specifying the SS7 control protocol W ith the appropria te sof tware lic ense, T AOS supports eit her ASGCP an d IPDC 0.
Signaling System 7 ( SS7) Configuring an SS7 s ignaling gat eway APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Prelimi nary May 9, 2000 18- 7 System IP address consider ati ons The S.
18-8 Preliminary May 9, 2000 APX 8000/MAX TNT/DSLTNT P hysical Interf ace Configuration Guide Signaling System 7 (SS7 ) Configu ring an SS 7 signal ing gateway For so me sites, ad ministrativ e policy.
Signaling System 7 ( SS7) Configuring an SS7 s ignaling gat eway APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Prelimi nary May 9, 2000 18- 9 [in T1/{ shelf-1 slot-1 7 }:line-inter f.
18-10 Preliminar y May 9, 200 0 APX 8000/MAX TNT/DSLTNT Physical Interface Configuration Guide Signaling System 7 (SS7 ) Configu ring an SS 7 signal ing gateway admin> set line-interface enabled = .
Signaling System 7 ( SS7) Configuring an SS7 s ignaling gat eway APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Preliminar y May 9, 2000 18-11 For example, the following com mands con.
18-12 Preliminar y May 9, 200 0 APX 8000/MAX TNT/DSLTNT Physical Interface Configuration Guide Signaling System 7 (SS7 ) Configu ring an SS 7 signal ing gateway per-line basis. Both the native 2-wire continuity check (GR-246-CORE Section B.2) and 4-wire-t o-2-wire emulation (GR-246-CORE Section B.
Signaling System 7 ( SS7) Configuring an SS7 s ignaling gat eway APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Preliminar y May 9, 2000 18-13 T AOS also supports the 4-wire- to-2-wir.
18-14 Preliminar y May 9, 200 0 APX 8000/MAX TNT/DSLTNT Physical Interface Configuration Guide Signaling System 7 (SS7 ) Configu ring an SS 7 signal ing gateway For examp le, the fol lowing string def.
Signaling System 7 ( SS7) Configuring an SS7 s ignaling gat eway APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Preliminar y May 9, 2000 18-15 ss7nmi de bug-l evel com mand The T AOS unit reports th e V oIP call statistics in the output of the ss7nmi debug- level command.
18-16 Preliminar y May 9, 200 0 APX 8000/MAX TNT/DSLTNT Physical Interface Configuration Guide Signaling System 7 (SS7 ) Configu ring an SS 7 signal ing gateway Number of CONNECT to ASG: 0 Number of C.
Signaling System 7 ( SS7) Configuring an SS7 s ignaling gat eway APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Preliminar y May 9, 2000 18-17 Number of CONNECT to ASG T otal number of active connectio ns to the signaling gateway since it was last reset.
18-18 Preliminar y May 9, 200 0 APX 8000/MAX TNT/DSLTNT Physical Interface Configuration Guide Signaling System 7 (SS7 ) Configu ring an SS 7 signal ing gateway Command outpu t showing errors The foll.
Signaling System 7 ( SS7) Cause co des fo r SS7 ASGC P call s to th e TAOS un it APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Preliminar y May 9, 2000 18-19 Number of T308 expiry ev.
18-20 Preliminar y May 9, 200 0 APX 8000/MAX TNT/DSLTNT Physical Interface Configuration Guide Signaling System 7 (SS7 ) Cause co des for S S7 ASGC P call s to the T AOS un it • The T A OS unit reports User bus y (17) i f it cannot find a r oute, or if no reso urce is available for the call.
Signaling System 7 ( SS7) Cause co des fo r SS7 ASGC P call s to th e TAOS un it APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Preliminar y May 9, 2000 18-21 ft1-caller = 0 calling-n.
18-22 Preliminar y May 9, 200 0 APX 8000/MAX TNT/DSLTNT Physical Interface Configuration Guide Signaling System 7 (SS7 ) Cause co des for S S7 ASGC P call s to the T AOS un it DIS_Q850_TEMPORARY_FAILU.
Signaling System 7 ( SS7) SNMP s upport fo r SS7 APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Preliminar y May 9, 2000 18-23 SNMP support for SS7 The SS7 MIB ( mgstat.mib) is implemented as a b ranch object with the main o bject, mgGroup , linked i nto t he As cend en ter pris e MIB.
.
APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Prel iminary M ay 9, 2000 19- 1 19 Confi gur in g Call Routi ng : The T A OS unit uses a set of call -routing algorith ms to ro ute inboun d and ou tbound calls to devices that handle the ap propriate call type.
19-2 Preliminary May 9, 2000 APX 8000/MAX TNT/DSLTNT P hysical Interf ace Configuration Guide Configuring Call Routing Understa nding the cal l-routing database Some slot cards act in a dual capaci ty , performing b oth network and hos t funct ions. Some dual-purpose cards provide their own HDLC reso urces.
Configuring Call Routing Unde rsta ndi n g th e cal l-r outi ng databa se APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Prelimi nary May 9, 2000 19- 3 How call routes affect device usage The system sorts its call-routing databa se en tries after a reset.
19-4 Preliminary May 9, 2000 APX 8000/MAX TNT/DSLTNT P hysical Interf ace Configuration Guide Configuring Call Routing Understa nding the cal l-routing database 3:1:4 ... The system uses the first modem on the lower -number ed card, then the first mo dem on the next card.
Configuring Call Routing Working with Call-Ro ute profil es APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Prelimi nary May 9, 2000 19- 5 Hybrid Access card. See “ Dedicat ing Series 56 cards t o modem pro cessing ” on page 19-9 for related information .
19-6 Preliminary May 9, 2000 APX 8000/MAX TNT/DSLTNT P hysical Interf ace Configuration Guide Configuring Call Routing Working wi th Call-Rou te profil es Outbound call routing by trunk group If no ex.
Configuring Call Routing Working with Call-Ro ute profil es APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Prelimi nary May 9, 2000 19- 7 W ith out an explicit call r oute for trunk group 8 , the system always tr ies the first E1 card, f inds that it d oes not use trun k group 8, and then drops t he call.
19-8 Preliminary May 9, 2000 APX 8000/MAX TNT/DSLTNT P hysical Interf ace Configuration Guide Configuring Call Routing Working wi th Call-Rou te profil es The next set o f commands creates an other Ca.
Configuring Call Routing Another way to ro ute incom ing calls (deprecat ed) APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Prelimi nary May 9, 2000 19- 9 The following commands creat.
19-10 Preliminar y May 9, 200 0 APX 8000/MAX TNT/DSLTNT Physical Interface Configuration Guide Configuring Call Routing Call rout ing algo rithms For example, the f ollowing commands specify that call.
Configuring Call Routing Call routing algorithms APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Preliminar y May 9, 2000 19-11 How the system finds a route After sorting the call-routing d atabase, the T AOS unit compares t he information i t has gathered about a call to the values in the da tabase, looking for a match.
19-12 Preliminar y May 9, 200 0 APX 8000/MAX TNT/DSLTNT Physical Interface Configuration Guide Configuring Call Routing Call rout ing algo rithms Det ails of how a r oute is chosen The system comp ares call information to its database entries.
Configuring Call Routing Call routing algorithms APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Preliminar y May 9, 2000 19-13 equal to the i npu t numb er , and its digits mus t match the add- on digits of the i np ut nu mber .
19-14 Preliminar y May 9, 200 0 APX 8000/MAX TNT/DSLTNT Physical Interface Configuration Guide Configuring Call Routing Call rout ing algo rithms voice service, all profiles that speci fy Digital-Call-T ype are removed from cons ideration. Only profiles that specify V oice-Call-T ype or Any-C all-T ype r e mai n in the list.
APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Preliminary May 9, 2000 A- 1 A Provisioning the Switc h This appendix pr ovides th e information neces sary for p roperly p rovisioning a sw itch for T1/EI or T1/E1 PRI access to the W AN.
A-2 Prelimi nary May 9, 200 0 APX 8000/MAX TNT/DSLTNT P hysical Interface Configuration Guide What you need from your T1 s ervice p rovider What you need from your T1 service provider Request the f ol.
APX 8000/MAX TNT/DSLTNT Physical Interf ace Configuration Guide Index-1 Index A ACM. See address complete mes sage (ACM) activation, for serial W AN card , 12-3 add-on nu mbers desc ribed , 7-19 speci.
Index-2 APX 8000/MAX TNT/DSLTNT Physical Interface Config uration Guide bearer capability and , 9-10 signalin g modes des cribed , 9-8 cause codes access S S7 gateway c ontro l protocol (ASGCP) calls , 18-19 disco nnect, sign aling s ystem 7 (S S7) supp ort f or call ID , 18-20 CCITT .
APX 8000/ MAX TNT/DSLTNT Physical I nterface Configu ration Gu ide Index-3 serial W AN card configurati on requir ements , 12-2 setting date and time , 1-5 setting log level , 1- 5 shelf-contro ller r.
Index-4 APX 8000/MAX TNT/DSLTNT Physical Interface Config uration Guide DS3-A TM physical interface , 14-2 DS3-A TM port physi cal-a ddress , 14-2 DSL config uring naile d connect ions , 17-5 configur.
APX 8000/ MAX TNT/DSLTNT Physical I nterface Configu ration Gu ide Index-5 Ethernet configu ring full duplex m ode on E thernet-2 card , 4-3 installing Ethernet-2 card , 4-2 overview of Ether net card.
Index-6 APX 8000/MAX TNT/DSLTNT Physical Interface Config uration Guide I IAM. See initial address message (IAM) ICD. See Internet Call Diversion (ICD) ICMP redir ects, conf iguring s ystem to ig nore.
APX 8000/ MAX TNT/DSLTNT Physical I nterface Configu ration Gu ide Index-7 modems A T modem st rings , configur ing addi tional , 5-3 conf iguri ng V .
Index-8 APX 8000/MAX TNT/DSLTNT Physical Interface Config uration Guide T AOS default valu e , 18-6 Use-System-IP -Address-As-S ource , 18- 7 pass word s assigni ng to seri al port , 1-8 changing Admi.
APX 8000/ MAX TNT/DSLTNT Physical I nterface Configu ration Gu ide Index-9 shelf -con troll er , 2- 6 shelf-control ler primary election , 2-1 shelf-control ler startup electio n , 2-1 robbed-bit conf.
Index-10 APX 8000/MAX TNT/DSLTNT Physical Interface Co nfiguration Guide cause codes for access SS7 gateway control proto co (ASG CP) ca lls , 18-19 connections statistics , 18-15 connectio ns, error .
APX 8000/ MAX TNT/DSLTNT Physical I nterface Configu ration Gu ide Index-11 usage , 7-4 , 7-18 T1 line continuity check, two -wire , 18-11 T1 lines assign ing name t o profi le , 7-7 call control for .
Index-12 APX 8000/MAX TNT/DSLTNT Physical Interface Co nfiguration Guide transport ser vice TCP/ IP , 18- 4 trans port-la yer options configuration , 18- 6 Tra p p f o f i l e sett i ng up , 2-1 1 Tra.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Lucent Technologies 7820-0802-003 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Lucent Technologies 7820-0802-003 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Lucent Technologies 7820-0802-003, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Lucent Technologies 7820-0802-003 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Lucent Technologies 7820-0802-003, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Lucent Technologies 7820-0802-003.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Lucent Technologies 7820-0802-003. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Lucent Technologies 7820-0802-003 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
