Manuel d'utilisation / d'entretien du produit Spheros R 26 du fabricant Loewe
Aller à la page of 54
233–32478.021 TV Spheros R 37 Spheros R 32 Spheros R 26 Operating Instructions Downloaded From TV-Manual.com Manuals.
- 2 Operating modes – PIP 25 PIP picture as freeze pictur e 25 Selecting the station of the PIP picture 25 Select the station of the TV picture (main picture) 25 PIP scan in the PIP picture 25 Inter.
3 - Remote contr ol - TV functions abc def RADIO -Set TV D VD STB VCR REC-MENU ghi jkl mno pqrs tuv wxyz EPG AV DISC-M DV D- AV CARD SV TITLE C-SET PIP P+ OK P– V– V+ -List Switch on/off - on stan.
- 4 Contr ol units Spher os R 26 and R 32 S P H E R O S DR+ Call the menu, in the menu: up Station up, in the menu: right Switch TV set on/off to standby Station down, in the menu: left Di.
5 - Contr ol unit Spher os R 37 + – S P H E R O S Display: red: standby green: operation green and red: timer recording, EPG data capture or radio mode Headphones connection Common Interface (CI-Slot) S-VHS connection (A VS) (i.
- 6 Connections to r ear panel - Spher os R 26 Antenna/cable analogue/digital Audio output left/right (analogue) Audio input left/right (analogue) Center audio input (analogue) Headphone connection S-VHS connection (A VS) (i.
7 - 89374.003 SERVICE VGA/XG A HDTV/P C IN AUDIOOUT AUDI O DIGIT AL IN LR OUT AUDI O IN L SD/HD-COMPONENT IN C/ P rr Y C/ P bb R C AV 1 RGB / YUV () AV 2 ANT -TV ANT -SAT 13/18V /350 mA 5 V /80mA HDMI.
- 8 Welcome T r ansporting Only transport the unit in an upright position. Hold the set by the top and bot- tom edges of the housing. The LCD scr een is made of glass and/or plastic and may break if not handled carefully .
9 - Welcome Note on the L CD scr een The TV set with an LCD scr een you have purchased meets the highest quality requirements and has been tested for pixel err ors. Despite the utmost caution in production of the displays, it cannot be totally ruled out that some of the pixels might be defective for technological reasons.
- 10 For your safety For your safety and to avoid unnecessary damage to your TV set, please read and observe the following safety instructions: • This TV set is designed exclusively for reception and repr oduction of video and audio signals.
11 - Connection Power mains Remove the cover for the connections. Connect the TV set to a 220-240V/50- 60 hertz power outlet. Plug the small plug of the mains cable into the mains socket on the rear of the TV set; plug the large mains plug into a mains socket.
- 12 First installation If the reception conditions are good, then a r oom antenna may be used for DVB- T . P assive and active room antennas are available on the market.
13 - First installation Automatic pr ogr amming Automatic programming of the TV set is started the fi rst time you switch it on. Follow the menus. By pressing in one of the arrow dir ections, you can choose the settings ... ... and con fi rm your settings by pressing OK.
- 14 Switching on/off Y our TV is equipped with an eco-standby power supply unit. On standby , the power consumption drops to low power . If you want to save even more electric- ity , switch the set off with the mains switch.
15 - Changing stations ... with the P+/P- buttons on the remote contr ol Stations up/down When changing, the station display is visible for a few seconds. If additional languages are broadcast with DVB stations, then the set displays the language/sound selection under the station display .
- 16 Basics about the menu oper ation Menus are called via the MENU button or via the button for special menus and can be hidden by using these buttons or by using the END button. The menu is displayed in the bottom section of the screen. At the top, you can see additional information for the menu point selected.
17 - Daily oper ation For the info system ... For each menu point, an info text is displayed at the top of the picture to help you with the setting. This saves you from having to refer back to the oper ating instructions. We shall demonstrate this using the station sear ch option as an example: Call the TV menu.
- 18 Daily oper ation For the index ... Using the index, you can access many operational functions directly . Y ou can also fi nd a great deal of information on technical terms about television.
19 - Setting the sound Volume and other fr equently used sound settings Setting the volume by using or OK , you can call other sound settings ... and select using ... use for the related selection/setting... ... and use to make the selection/setting there.
- 20 Oper ating modes – TV TV In initial installation and daily operation, the TV set is in TV mode. This is also the case when none of the other modes of operation, such as EPG, T eletext, PIP or Radio, have been selected. Each of these operating modes has a separate menu with separ ate functions for the coloured keys.
21 - Oper ating modes – TV Call additional functions Select additional functions such as Image+ ✳ , T eletext subtitles, Personal teletext pages, Headphone volume, Scan stations and to move the picture up and down. Call timer overview If timer recordings have been pr ogrammed, you will see when which station is recorded her e.
- 22 DVB character set • Western European • P olish • Standar d. Rotate TV For Spheros R 32/37, it is possible to r otate the TV set on a Loewe rotating stand. Y ou can fi nd out mor e on page 41. DVB subtitles If the station provides DVB subtitles, then you can have the TV display them permanently or suppress their display .
23 - Oper ating modes – TV Removing the CA module 1. Switch the TV set off with the mains switch. 2. Remove the cover from the back of the set on the upper left. 3. Press the eject button at the module slot; the module is unlocked. 4. Remove the module from the set.
- 24 Oper ating modes – TV Image+ demo mode In order to show the way Image+ works, a "Demo mode" is integrated. In "Demo mode", the current picture is divided into two parts. The left half of the picture is shown in "normal" mode, the right half in the Image+ optimised mode.
25 - Pictur e in pictur e (PIP) Note: The coloured keys do not work as described below with DVB- T stations in GB, but they operate as described on page 30 (Digital T eletext). Picture in picture displays ar e possible if the set has an analogue PIP tuner or a digital satellite tuner in addition to the analogue TV cable tuner .
- 26 Oper ating modes – PIP Functions in the PIP menu In the PIP menu, you can set the PIP type (small picture or split screen) and the position of the small picture. Call the PIP menu (PIP must be active, green bar/frame) Setting the PIP type Y ou can have the PIP picture displayed as a small PIP or split scr een.
27 - Oper ating modes – EPG When receiving digital terrestrial and digital satellite stations, you may fi nd that two identical EPG data are displayed in the "EPG (DVB)" menu for one station.
- 28 Oper ating modes – EPG In front of the progr amme’s title, the system places an ✓ . This station is switched later to this programme when the set is switched on. If the TV is off , it switches on again automatically at the beginning of the marked programme if this has been set in the EPG menu.
29 - In Multiple pages scroll using . Y ou can see which multiples pages can be called in the bottom menu line. Call contents page 100 Call the TOP table The TOP table is a gener al list of teletext. Y ou can only call the table for stations that use the TOP oper ating system.
- 30 Oper ating modes – T eletext Progr amme timer r ecor dings A video and/or DVD recorder must be connected and logged in in the connec- tion wizard. Call the progr amme pages of the current station in teletext mode using the Direct recor ding button .
31 - Radio menu Call radio menu In the radio menu, as in TV mode, you can set the sound, search for r adio stations and store them (automatically or manually – not with DVB- T mode in GB), delete stations from the list, rearr ange them or change names and set the switching off and alarm functions.
- 32 Oper ating additional equipment Search for and store the station of the video r ecorder (if no Euro- A V cable is available) Switch on the test station on the VCR or insert a recor ded tape and start play- back. In some video recorders the station must be switched on by activating the modulator .
33 - Oper ating additional equipment Timer r ecor ding with video or DVD r ecor der Y ou can progr amme timer recordings on the TV set. Pr ogramming can be done with the EPG programme guide (not with DVB- T in GB), teletext or manually .
- 34 Oper ating additional equipment Audio output "AUDIO DIGIT AL OUT" The digital audio signal is applied at the "AUDIO DIGIT AL OUT" socket of the TV . For example, you can connect an external digital audio ampli fi er or the L oewe Auro system here.
35 - PREOUT LC R LL SL LFE SR R R TO T V AUX1 IN DIGITAL IN DIGITAL OUT TV L-LINK 12V / 15mA EXT AUX OUT AUX 2 ON Line IN P ower OUT OFF Bass Intensity Center to System connector 230V~50/60Hz Surr. Front Right Surr. Fro n t Subw. Left Right Center Left Slave Master R R L C L Phase Min.
- 36 Oper ating additional equipment Connecting other audio ampli fi ers or active speakers In the connection wizard, select " HiFi/A V ampli fi er " under "Equipment selec- tion: audio component".
37 - Oper ating additional equipment HDMI (DVI) connection The HDMI connection (High De fi nition Multimedia Interface) allows digital picture and sound transmission via a connecting cable, e.
- 38 Oper ating additional equipment Sound from PC or Set T op Box Feed the analogue audio signal from the PC or the S TB to the sockets AUDIO IN L/R on the TV via a cinch cable.
39 - Use the rotary switch if you want to switch over a VCR, DVD device or a Set T op Box. Press the END and EPG buttons simultaneously for at least 5 seconds. The upper left indicator on the remote control will blink twice. Enter the four numbers in sequence that you found in the code list (e.
- 40 Oper ating additional equipment Using the RC3 remote contr ol to oper ate a VCR Set the rotary switch to "VCR". The infrared code and the functions for a L oewe VCR are preset at the factory .
41 - Oper ating additional equipment Rotating the TV set for Spher os R 32/37 Spheros R 32/37 have a connection for a rotating stand contr ol. If the TV set is mounted on a motor unit, you can use the remote control to adjust it to your seating location accordingly .
- 42 What to do, if ... Problem Possible cause Remedy The "Recording" menu point is not displayed in the TV menu. No video or DVD recorder logged in. Log in the video or DVD recor der in the connection wizard and connect the device. "Connections" cannot be called in the TV menu (deactivated).
43 - Problem Possible cause Remedy Digital Link Plus does not function. a) Euro-A V cable is not fully wir ed (pin 10 not wired). b) Some recorders can only adopt stations during the initial installation of the TV set. c) All or some of the terrestrial and cable stations are stored on station stor age locations ≥ 99.
- 44 Gener al data T ype Spheros R 26 Spheros R 32 Spheros R 37 Item no. 65435xxx 65436xxx 65437xxx Versions DVB- T CI (MHEG-5) Versions DVB- T/C CI Versions DR+ DVB- T CI (MHEG-5) Versions DR+ DVB- T/C CI • • – – • • • • • • • • Set dimensions without stand (ca.
45 - T echnical data Electrical data Chassis name L 2650 Power supply 220 V -240V/50- 60 Hz T uner VHF/UHF/ cable Hyperband 8 MHz 41 MHz to 860 MHz Station storage locations 1680 TV standards B/G, I, .
- 46 Accessories Wall holders and stands Refer to the notes on the installations options on page 8. PIP tuner The PIP tuner enables picture in picture displays (PIP) for analogue terr estrial and cable reception. Y ou can retr o fi t either this PIP tuner or a digital satellite tuner .
47 - Retr o fi tting options The following table shows the equipment and retro fi tting options for the individual device versions. Device version / Equipment Item no.
48 Loewe Austria GmbH Parkring 10 1010 Wien, Österreich T el.: +43 - 810/0810-24 (zum Ortstarif) E-Mail loewe@loewe.co.at International Dynamics Australasia Pty Ltd. 129 Palmer S treet Richmond 3121, Victoria, Australia T el. +61 - 3 - 94 29 08 22 Fax +61 - 3 - 94 29 08 33 Email mail@internationaldynamics.
49 - DVD-Player 0539 DVD-Recorder Centros 11x2 0741 DVD-Recorder Centros 21x2 1463 STB 1127 VCR 0866 3DLAB 0539 A- T rend 0714 Acoustic Solutions 0730 AEG 0788 0770 Aiwa 0641 0695 Akai 0790 0788 0690 .
- 50 Supervision 0730 0768 SV A 0672 Synn 0768 T andber g 0713 T atung 0770 T eac 0717 0741 0571 0768 0591 0790 T echnics 0490 1908 T echnika 0770 T echwood 0713 T ensai 0690 0651 T evion 0651 0768 Th.
51 - Codelist RC3 / Lista de códigos RC3 Micormay 0348 Micromaxx 0209 Migros 0000 Mitsubishi 0043 0067 0081 Multitec 0037 Multitech 0000 0072 0104 Murphy 0000 Myryad 0081 NAD 0104 National 1562 0226 .
- 52 Codelist RC3 / Lista de códigos RC3 Diskoverer 0605 0157 Diskovery 0668 0710 Diseqc 0710 Distratel 0084 0885 1205 Distrisat 0200 DMT 1075 DNT 0200 0396 DREAM multimedia.
53 - Codelist RC3 / Lista de códigos RC3 1075 1085 Smart 0132 0299 1101 0882 0396 1113 0115 0713 Sony 0282 0847 0853 0455 SR 0132 Starland 0713 Strong 0879 0853 1105 1159 1300 Sunsat 0713 Sunstar 013.
- 54 Downloaded From TV-Manual.com Manuals.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Loewe Spheros R 26 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Loewe Spheros R 26 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Loewe Spheros R 26, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Loewe Spheros R 26 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Loewe Spheros R 26, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Loewe Spheros R 26.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Loewe Spheros R 26. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Loewe Spheros R 26 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
