Manuel d'utilisation / d'entretien du produit RV5080 du fabricant Linear
Aller à la page of 32
Operation and Installation Manual ® RV5080 AM / FM Stereo Multi-Media Receiver MHz.
Please take the time to read all of the information in this manual. Familiarity with operation and instal- lation procedures will help you obtain the best possible performance from your new AM/FM Stereo Multi-Media Receiver.
Button Locations and Functions 3 1. Power On/Off: Press to turn the unit on or off. 2. Radio Station Recall Buttons (1-3): Press and release when recalling preset radio stations. Press and hold until the preset number appears to memorize a radio station.
4 Button Locations and Functions (Continued) 15. Play/Pause and Mute Button ( ll): Radio and Multimedia Input Modes: Press to mute volume level. Press again to restore. Disc Mode: Press to pause disc play, press again to resume play. IPOD Mode: Press to pause play, press again to resume play.
5 Remote Control Button Locations and Functions 1. Power On/Off Button ( ): Press to turn the unit on or off. 2. Menu Button: Press to access the Menu screen in movie mode. 3. Sound Control Button (VOL/TONE): Press to select the sound controls: Bass, Treble and Balance.
6 General Operations Power On/Off: Press the button to turn the unit On/Off. Selecting a Play Source: To select a play source, press one of the follow- ing mode buttons: AUX: Audio/Video Input Front (.
7 Sound Controls Bass: Select the Bass mode by pressing the VOLUME knob. Increase the Bass by rotating the knob clockwise. Decrease the Bass by rotating the knob counterclockwise. After 6 seconds control reverts back to volume control. Bass, Treble and Balance Control Select the desired sound mode by pressing the VOLUME knob.
8 Sound Controls (Continued) Mute: Press the MUTE button to mute the volume level. Press the MUTE button again to restore the volume. Speaker Selection Selecting Speaker Sets: • Press the A button to toggle speaker set A on and off. The LED above SPEAKER A lights up when speaker set A is on.
9 Sleep Timer Operation Setting the Sleep Timer: 1. Press the SLP button and “SLEEP 10” appears in the display. 2. Keep pressing the SLP button again until the desired sleep time appears in the display (0, 10, 20, 30, 40, 50, 60, 70, 80 minutes). 3.
10 Alarm Operation Setting the Alarm Timer: 1. Press the ALM button and the clock will appear in the display with the Hour number flashing. 2. Rotate the VOLUME knob until the correct Hour appears in the display. “ALARM” will appear in the display indicating the alarm is activated.
11 Radio Operations Manually Tuning in a Radio Station: Press the l button to tune in a lower radio frequency. Press the l button to tune in a higher radio frequency. Note: The unit will automatically switch from FM Mono to FM Stereo when the signal strength increases to a stereo level.
12 Disc Warnings DVD 12cm disc (Single-sided disc only) CD 12cm disc MP3 12cm disc Label side up Do not touch the underside of the disc Do not bend Wipe the disc from the center toward the outside edg.
13 Music Disc Operation General Operations: Gently insert the disc into the slot with the label side up. The unit will automatically load the disc. Note: If a disc does not auto-load DO NOT FORCE into the slot, as you may already have a disc loaded. Music Track Selection: Press the l button to select a lower track.
14 Music Disc Operation (Continued) Ejecting the Disc: P ress the button to eject a disc. Preview Music Tracks: P ress the INTRO button to play the first 15 sec- onds of each track, “INTRO” will appear in the display. Press it again to stop introduction scan and listen to the track and “INTRO” will disappear from the display.
15 Elapse Times: Continue to press the AS/PS button during music disc play to display the following disc information in this order: Single Elapse, Single Remain, Total Elapse and Total Remain . Music Disc Operation (Continued) MP3 Disc Operation General Operations: Gently insert the disc into the slot with the label side up.
16 MP3 Disc Operation (Continued) Stopping the Disc: Press the button to stop the disc. To resume play, press the ll button. Pressing the button 2 times, then pressing the ll button will play the disc from the begin- ning. MENU MODE EJECT POWER SETUP VOL TONE VOL ENTER VOL Ejecting the Disc: P ress the button to eject a disc.
17 Movie Disc Operation General Operations: Gently insert the disc into the slot with the label side up. The unit will automatically load the disc. “LOADING” will appear in the display and the disc will automatically start playing. Note: If a disc does not auto-load DO NOT FORCE into the slot, as you may already have a disc loaded.
18 Zooming the Image: To enlarge the on-screen image during disc play, press the ZOOM button. Each time the button is pressed, the magnification increment changes in the following order: 2X, 3X, 4X, 1/2, 1/3, 1/4. Use the navigation buttons to move the image on the screen.
19 Movie Disc Operation (Continued) Audio Language Menu: Press the AUDIO button during playback to review the current setting. Most movies have their own audio setup.
20 IPOD Operation General Operations: 1. Connect an IPOD to the cable attached to the RV5080. 2. The unit will automatically switch to the IPOD mode and start playing. Note: The IPOD controls will become inoperable, and the RV5080 now controls the IPOD.
21 IPOD Operation (Continued) 3. Press the SCAN button to select the SONGS menu. Pausing a Track: Press the ll button to pause the track. Press it again to resume play. 4. Press the l or l button to select the desired song from the menu.
22 IPOD Operation (Continued) Display Selection: Press the DISPLAY button to display the follow- ing track information: Elapse Time, Artist, Album and Title. Manually Selecting the IPOD Source: If a different source is playing and you wish to listen to the IPOD, press the i button until “IPOD AUT” appears in the display.
23 USB Input Selecting USB Audio Play Source: Press the USB/DISC button and “DISC” appears in the display. Remove the cover from the USB port. Insert the USB device and the files will automatically start playing. Note: You can insert the USB device in any mode, the unit will automatically switch modes and start playing the USB device.
24 Audio/Video Input Selecting the Audio/Video Source: Note: The RV5080 does not control the device, it just allows the audio/video to be played through the system. Front Audio/Video Input: Insert the 3.5mm jack from the audio/video device into the AV input socket on the front of the housing .
25 Headphone Output Plugging in Headphone: Insert a 3.5mm headphone jack into the Headphone Output socket. Use the Volume knob on the headphone to adjust the audio level. Note: To make it so the sound only can be heard through the headphones press the A, B, C but- tons once to deselected speaker sets A, B and C.
26 Installation 9 4 5 / 8 ” 6 1 / 4 ” Chassis Opening Structural Stud Wall Panel Caution: Do not install radio without rear cover installed: No user -serviceable parts inside.
27 Speaker Connections _ + Brown/Black Wire _ + Right Speaker A Left Speaker A _ + _ + Right Speaker C Left Speaker C Brown Wire Gray/Black Wire Gray Wire _ + Green/Black Wire _ + Right Speaker B Left.
28 Wiring and Auxiliary Connections Red Wire (+) to 12 Volt DC Powe r Black Wire Ground 15A Fuse External Automotive Ty pe Antenna (Optional) AV In Monitor (Optional) IPOD (Optional) IPOD Cable (Optio.
29 Wiring and Auxiliary Connections (Continued) Analog Audio In Monitor (Optional).
30 Outdoor Antenna Grounding: If an outside antenna is connected to the receiver, be sure the antenna system is grounded, so as to provide some protection against voltage surges and built up static charges. Section 810 of the National Electrical Code, ANSI/NFPS No.
31 Warranty ONE (1) YEAR LIMITED WARRANTY Magnadyne Corporation or its authorized agents will within one year from the date of sale to you, repair, replace or refund the retail sales price of said pro.
© Copyright 2011 Magnadyne Corporation RV5080-UM Rev. A 4-20-11.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Linear RV5080 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Linear RV5080 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Linear RV5080, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Linear RV5080 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Linear RV5080, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Linear RV5080.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Linear RV5080. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Linear RV5080 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
