Manuel d'utilisation / d'entretien du produit ICBP 3166 PremiumPlus du fabricant Liebherr
Aller à la page of 18
Operating and installation instructions Combined fridge-freezer with BioFresh compartment for integrated use, door-on-door 010410 7084282 - 03 ICB/ICBP/ICBN/SICBN .
Contents 1 Appliance at a glance ............................................ 2 1.1 Description of appliance and equipment .................. 2 1.2 Range of appliance use ............................................ 2 1.3 Conformity ..................
Furthermore, the appliance is unsuited for use in areas exposed to an explosion hazard. The appliance is set to operate within specific ambient temper- ature limits according to its climate rating. The correct climate rating for your appliance is indicated on the type plate.
(2) SuperFrost button (8) Child lock symbol (3) On/Off button freezer compartment (9) Down setting button refrig- erator compartment (4) Down setting button freezer compartment (10) Up setting button .
WARNING Risk of injury due to the door dropping out! If the fastening parts are not screwed into place firmly enough, the door may drop out. This may lead to severe injuries. What is more, the door may not close and therefore the appliance may fail to cool properly.
Fig. 7 4.3.1 Installing the appliance Fig. 8 u Detach the connecting cable from the rear of the appli- ance. Remove the cable holder otherwise there will be vibratory noise. u Lay the connecting cable with the help of string in such a way that the appliance can be easily connected following installa- tion.
u Fit the equaliser trim Fig. 10 (20) concentrically onto the appliance: Slide it into the recess and engage it in the keyholes. Fig. 10 u Screw all the mounting brackets Fig. 11 (34) to the pre-drilled holes in the appliance door using hexagon screws Fig.
u Check 8 mm-presetting. (Distance between appliance door and lower edge of crosspiece) u Slide up the assembly aids Fig. 20 (30) to the height of the unit door. Lower stop edge ▲of the assembly aid = upper edge of the unit door to be fitted. u Unscrew the cross- piece Fig.
Check the following points to ensure the appliance is fitted prop- erly. Failure to do so may lead to icing, condensate forming and malfunction: w The door has to close properly w The unit door must not butt against the unit body w The seal must have a firm fit at the upper corner on the handle side.
Put the appliance into operation about 2 hours before first loading food to be frozen. Do not load food to be frozen before the temperature display reads -18 °C. 4.8.1 Switching on the freezer compartment u Press On/Off button, freezer compartment Fig.
u Use recyclable plastic, metal, aluminium and glass containers and cling film for wrapping. u Use the front area of the refrigerator compartment floor only for briefly putting down cooled products, e.
5.6.2 DrySafe The DrySafe is suitable for storing dry or wrapped food (e.g. dairy products, meat, fish, sausages). A relatively dry storage climate is established here.
5.6.6 Setting the humidity in the HydroSafe u Low humidity: move the regulator to the left. u High humidity: move the regulator to the right. 5.6.7 Drawers Fig. 28 u Remove drawers as illustrated. u To remove drawer cover: once the drawers have been removed, carefully pull the drawer cover with humidity control forwards and lower it for removal.
u To store frozen food directly on the shelves: pull the drawer forwards and lift it out. 5.7.6 Shelves u To remove the shelf: lift up at the front and pull out.
Switching off the IceMaker* If no ice cubes are needed, the IceMaker can be switched off independently of the freezer compartment. When the IceMaker is switched off, the IceMaker drawer can also be used for freezing and storing food. u Press the On/Off button for about 1 second until the LED goes out.
6.4 Cleaning the IceMaker* Fig. 32 The IceMaker has to be switched on. u Pull out the drawer and remove the ice cubes. u Clean the drawer with warm water and mild washing-up liquid. u When the drawer is pulled out, hold down the On/Off button (about 10 seconds).
u alarm button Fig. 2 (1) Press w The warmest temperature reached during the power failure will appear in the temperature display for about 60 s. After that, the actual temperature in the freezer will re-appear. u To prematurely cancel the display of the warmest tempera- ture: press alarm button Fig.
Disposing of the appliance 18.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Liebherr ICBP 3166 PremiumPlus c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Liebherr ICBP 3166 PremiumPlus - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Liebherr ICBP 3166 PremiumPlus, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Liebherr ICBP 3166 PremiumPlus va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Liebherr ICBP 3166 PremiumPlus, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Liebherr ICBP 3166 PremiumPlus.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Liebherr ICBP 3166 PremiumPlus. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Liebherr ICBP 3166 PremiumPlus ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
