Manuel d'utilisation / d'entretien du produit M4210N-B10J du fabricant LG
Aller à la page of 52
M ake sure to read the Important Precautions before using the product. Keep the User's Guide(CD) in an accessible place for furture reference. S ee the label attached on the product and give the information to your dealer when you ask for service.
1 Safety Precautions Please read these safety precautions carefully before using the product. If you ignore the caution message, you may be slightly injured or the product may be damaged If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death.
2 2 Safety Precautions Electrical Power Related Precautions Make sure to connect the power cable to the grounded current. - You may be electrocuted or injured.
3 Safety Precautions Caution Precautions in Using the Product W arning Do not put or store inflammable substances near the product. - There is a danger of explosion or fire due to careless handling of the inflammable substances. When cleaning the brown tube surface, unplug the power cord and scrub with soft cloth to prevent scratching.
4 Name of the Remote Control Buttons (A type) Using the Remote Control • Power On/Off Button SLEEP There is not a function which is supported • CTR.PWR Button Turn on the power of the PC built in the monitor and then turn off. (The CTR.PWR function operates only when the PC Control menu is off.
5 SLEEP If you press the button once, the following Input Signal Window will appear. Select the signal type you want using the button. • Input Select Button 1. Take out the battery cap. 2. Insert the batteries with correct polarity (+/-). 3. Close the battery cap.
6 Using the Remote Control 1 2 3 4 5 6 7 8 0 9 CTR. PWR * There is not a function which is supported There is not a function which is supported • Menu Button • Check Button • Volume Button • M.
7 1 2 3 4 5 6 7 8 0 9 CTR. PWR * If you press the button once, the following Input Signal Window will appear. Select the signal type you want using the button. • Input Select Button Using the Remote Control 1. Take out the battery cap. 2. Insert the batteries with correct polarity (+/-).
8 Connecting the Speakers Mount the product onto the speaker by using a screw as following picture, and then connect the speaker cable. * Applicable only for models that support the speakers.
9 Name and Function of the Parts Rear View Power Connector : Connect the power cord Wired Remote Control Port RS-232C Serial Ports RGB, DVI Ports PC Sound Jack : Connect the audio cable to the *LINE OUT jack of the PC sound card.
10 Connecting to External Devices OUT IN RGB IN RGB OUT DVI IN REMOTE CONTROL IN RS-232C (CONTROL& SERVICE) AUDIO (RGB/DVI) LAN RGB OUT SERLAL PORT USB H/PHONE OUT SP/DIF Rear side of the product. First of all, see if the computer, product and the peripherals are turned off.
1. 11 RGB IN D VI IN First of all, see if the computer, product and the peripherals are turned off. Then, connect the signal input cable. When connecting with the D-Sub signal input cable.
12 • How to connect to two computers. Connect the signal cables ( DVI and D-Sub) to each computer. Press the INPUT button in a remote control to select the computer to use. • Directly connect to a grounded power outlet on the wall or a power bar with a ground wire.
13 Use this function when displaying ANALOG RGB inputs of a PC to the other product. RGB IN RGB OUT RGB IN RGB OUT RGB IN RGB OUT RGB IN RGB OUT Product 1 • To use different products connected to ea.
14 T o arrange cables using cable management cable management 1. 2. Arrange the cables in the center as shown in the following picture. Fit the cable management to the Holder Groove downwards. Hold the Cable management with both hands and pull it downward.
15 • Set it up close to the wall so the product doesn't fall over when it is pushed backwards. The instructions shown below is a safer way to set up the product, which is to fix it on the wall so the product doesn't fall over when it is pulled in the forward direction.
ON/OFF AUTO/SET SOURCE 16 ON/OFF A UTO/SET SOURCE Selecting and Adjusting the Screen Name of the Buttons in the Screen Adjustment Unit • Press this button to turn on the power. Press this button again to turn it off. • This Indicator lights up blue when the display operates normally(on mode).
Auto in progress For optimal display Change resolution to 1360 X 768 17 Name of the Buttons in the Screen Adjustment Unit AUTO/SET Button Selecting and Adjusting the Screen Auto in progress • The unit that receives the signal from the remote control.
18 Selecting and Adjusting the Screen OSD Menu Icon Function Description PICTURE SOUND Adjusts the screen video. Adjusts the audio function. Adjusts screen brightness, contrast and color that you prefer. Note O SD(On Screen Disp lay) The OSD function enables you to adjust the screen status conveniently since it provides graphical presentation.
19 How to adjust the OSD (On Screen Display) screen • Use the remote control to adjust the OSD screen. How to adjust the screen automatically You need to adjust the screen display when connecting the product to a new computer or changing the mode. Refer to the following section to set an optimal product screen.
20 Selecting and Adjusting the Screen Contrast To adjust the contrast of the screen. Brightness To adjust the brightness of the screen. Red / Green / Blue Set your own color levels. CSM CSM • 6500K/9300K Selecting a factory setting color set. 6500K: Slightly reddish white.
21 Selecting and Adjusting the Screen The best sound tone quality will be selected automatically depending on the video type that you're currently watching.
22 Selecting and Adjusting the Screen Reset Selecting the options Language Power indicator To choose the language in which the control names are displayed. Use this function to set the power indicator on the front side of the product to On or Off . If you set Off , it will go off.
23 Selecting and Adjusting the Screen Selecting the options Tile mode 0 Tile mode Off H-Size 0 V -Size H-Position V -Position ID Reset Reset It is used to enlarge the screen and also used with several products to view screen, Tile mode and choose Tile alignment and set the ID of the current product to set location.
24 Selecting and Adjusting the Screen Selecting the options • Tile mode - Tile mode : row x column ( r = 1, 2, 3, 4 c = 1, 2, 3, 4) - 4 x 4 available. - Configuration of an integration screen is also available as well as configuration of one by one Display.
25 Selecting and Adjusting the Screen You can assign a unique Set ID NO (name assignment) to each product when several products are connected for display. Specify the number (1~99) using the button and exit. Use the assigned Set ID to individually control each product using the Product Control Program.
26 Selecting and Adjusting the Screen Adjusting Screen CLOCK/PHASE and Position Auto-configure This button is for the automatic adjustment of the screen position, clock and phase. This function is suitable for analoge singnal input only. Auto-configure ARC Auto-configure To minimize any vertical bars or stripes visible on the screen background.
27 T roubleshooting • See if the power cord is properly connected to the outlet. • See if the power switch is turned on. • Adjust brightness and contrast again.
28 T roubleshooting ● Is the screen position wrong at the RGB mode? ● Do thin lines appear on the background screen at the RGB mode? ● Horizontal noise appears or the characters look blurred at the RGB mode. ● The screen is displayed abnormally at the RGB mode.
29 T roubleshooting • Set the number of colors to more than 32 bits (true color) Select Control Panel – Display – Settings – Color Table menu in Windows. • Several pixels (red, green, white or black color) may appear on the screen, which can be attributable to the unique characteristics of the LCD panel.
30 LCD Panel Power Dimensions &Weight NOTE Information in this document is subject to change without notice. 42 inches (106.73 cm) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel Anti-Glare coating Visible diagonal size: 106.73 cm 0.
31 Specifications RMS Audio Output 10W+10W(R+L) Input Sensitivity 0.7Vrms Speaker Impedance 8 Ω Audio * Applicable only for models that support the speakers NOTE Information in this document is subject to change without notice.
32 Preset mode Horizontal Frequency (kHz) Vertical Frequency (Hz) PC Mode – Preset Mode Preset mode Horizontal Frequency (kHz) Vertical Frequency (Hz) 1 2 3 4 5 6 7 8 9 640 x 350 720 x 400 640 x 480 640 x 480 800 x 600 800 x 600 832 x 624 1024 x 768 1024 x 768 31.
33 Specifications Kensington Security Slot - ( This has to be purchased separately if required. ) Connected to a locking cable that can be purchased separately at most computer stores VESA wall mounting Connected to another object (stand type and wall-mounted type.
34 Specifications Signal Connector Pin Assignment 1 8 9 17 24 16 Pin Signal(DVI-D) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 T. M. D. S. Data2- T. M. D. S. Data2+ T. M. D. S. Data2/4 Shield T. M. D. S. Data4- T. M. D. S. Data4+ DDC Clock DDC Data Analog Vertical Sync.
35 Specifications 1. Connect the upstream port of the display to the downstream port of the USB compliant PC or another hub using the USB cable. 2. Connect the USB compliant peripherals to the downstream ports of the display.
Controlling the Multiple Product RS-232C 1 Connecting the cable Connect the RS-232C cable as shown in the picture. * The RS-232C protocol is used for communication between the PC and product. You can turn the product on/off, select an input source or adjust the OSD menu from your PC.
Controlling the Multiple Product RS-232C 2 Command Reference List COMMAND1 COMMAND2 DATA(Hexa) 01. Power k a 00H - 01H 02. Input Select k b 00H - 01H 03. Aspect Ratio k c 01H - 01H 04. Screen Mute k d 00H - 01H 05. Volume Mute k e 00H - 01H 06. Volume Control k f 00H - 64H 07.
Controlling the Multiple Product OK Acknowledgement [Command2][ ][Set ID][ ][OK][Data][x] * The Product transmits ACK (acknowledgement) based on this format when receiving normal data. At this time, if the data is data read mode, it indicates present status data.
Controlling the Multiple Product RS-232C 4 T ransmission / Receiving Protocol 01. Power On(Command : a) To control Power On/Off of the Set. Transmission [k][a][ ][Set ID][ ][Data][Cr] Data 0 : Power Off 1 : Power On ff: Read Status Acknowledgement [a][ ][Set ID][ ][OK][Data][x] To show the status of Power On/Off.
Controlling the Multiple Product RS-232C 03. Aspect Ratio(Command : c) (Main picure format) To adjust the screen format. You can also adjust the screen format using the ARC (Aspect Ratio Control) button on remote control or in the Screen menu.
Controlling the Multiple Product RS-232C 6 T ransmission / Receiving Protocol 05. Volume Mute(Command : e) To control On/Off of the Volume Mute. Transmission [k][e][ ][Set ID][ ][Data][Cr] Data 0 : Vo.
Controlling the Multiple Product RS-232C 7 T ransmission / Receiving Protocol 07. Contrast(Command : g) To adjust screen contrast. You can also adjust the contrast in the Picture menu. Transmission [k][g][ ][Set ID][ ][Data][Cr] Data Min : 00H ~ Max : 64H • Refer to ‘Real data mapping’ as shown below.
Controlling the Multiple Product RS-232C 8 T ransmission / Receiving Protocol 09. OSD Select(Command : l) To control OSD on/off to the set. Transmission [k][l][ ][Set ID][ ][Data][Cr] Data 0 : OSD Off 1 : OSD On Acknowledgement [l][ ][Set ID][ ][OK][Data][x] Data 0 : OSD Off 1 : OSD On 10.
Controlling the Multiple Product RS-232C 9 12. Select Color Temp (Command : u) To adjust the screen color temperature. Transmission [k][u][ ][Set ID][ ][Data][Cr] Data 0 : User 1 : 9300K 2 : 6500K Acknowledgement [u][ ][Set ID][ ][OK][Data][x] Data 0 : User 1 : 9300K 2 : 6500K ▲ T ransmission / Receiving Protocol 13.
Controlling the Multiple Product RS-232C 10 T ransmission / Receiving Protocol 14. Red Gain Adjust (Command: j w) To adjust Red color level. Transmission [j][w][ ][Set ID][ ][Data][Cr] Data Min : 00H .
Controlling the Multiple Product RS-232C 11 T ransmission / Receiving Protocol 17. Tiling Mode (Command :d d) Change a Tiling Mode. Transmission [d][d][][Set ID][][Data][x] * The data can not be set to 0X or X0 except 00. Acknowledgement [d][][00][][OK/NG][Data][x] 18.
Controlling the Multiple Product RS-232C 12 T ransmission / Receiving Protocol 19. Tile V Position(Command : d f) To set the Vertical position. Transmission [d][f][][Set ID][][Data][x] * The data range is from 00 to 64(in Hex). Acknowledgement [f][][Set ID][][OK/NG][Data][x] 20.
Controlling the Multiple Product RS-232C 13 T ransmission / Receiving Protocol 22. Tile ID Set (Command : d i) To assign the Tile ID for Tiling function. Transmission [d][i][][Set ID][][Data][x] * The data range is from 00 to 10 tile mode. (in Hex). Acknowledgement [i][][Set ID][][OK/NG][Data][x] ▲ 23.
Controlling the Multiple Product RS-232C 14 24. PC Power On/Off (Command : d s) To turn On and Off the built in PC. Transmission [d][s][][Set ID][][Data][x] Data 0 : PC Power Off 1 : PC Power On Acknowledgement [s][][Set ID][][OK/NG][Data][x] *This operates only when ‘PC Control’ is ‘Off’.
RS-232C 15 IR Codes How to connect Remote Control IR Code Connect your wired remote control to Remote Control port on the Product. Output waveform single pulse, modulated with 37.
RS-232C 16 IR Codes ▲ ▲ 00 01 02 03 08 C4 C5 09 0B 43 5B 44 10 11 12 13 14 15 16 17 18 19 D5 C6 79 77 AF Code(Hexa) Function Note ▲ ▼ VOL( ) VOL( ) POWER ON/OFF POWER ON POWER OFF MUTE INPUT M.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté LG M4210N-B10J c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du LG M4210N-B10J - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation LG M4210N-B10J, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le LG M4210N-B10J va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le LG M4210N-B10J, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du LG M4210N-B10J.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le LG M4210N-B10J. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei LG M4210N-B10J ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
