Manuel d'utilisation / d'entretien du produit XBV613 du fabricant LG Electronics
Aller à la page of 38
V1310MZ.NA1ULZ_ENG Installation and Operating Guide | W arranty Model Number | XBV613 | DVD Player + Video Cassette Recorder © Copyright 2005, LG Electronics U.
2 This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
3 1. Read these instructions. - All these safety and operating instructions should be read before the product is operated. 2. Keep these instructions. - The safety , operating and use instructions should be retained for future reference. 3. Heed all warnings.
4 Contents Introduction . . . . . . . . . . . . . . . . . . . . .5-9 Moisture Condensation . . . . . . . . . . . . . . . . . .5 Symbol Used in this Manual . . . . . . . . . . . . .5 About the Symbol Display . . . . . . . . . . . .5 Notes on Discs . . .
5 To ensure proper use of this product, please read this owner ’s manual carefully and retain for future refer- ence. This manual provides information on the operation and maintenance of your DVD+VCR. Should the unit require service, contact an authorized service loca- tion.
6 T T ypes of Playable Discs ypes of Playable Discs DVD (8 cm / 12 cm disc) Audio CD (8 cm / 12 cm disc) In addition, this unit plays DVD±R/RW and CD-R/R W that contains audio titles, MP3, WMA, DivX and/or JPEG files. This indicates a product feature that is capable of playing DVD-RW discs recorded with Video Recording format.
7 Introduction a Disc T ray (DVD deck) Insert a disc here. b Cassette Compartment (VCR deck) Insert a video cassette here. c 1 POWER Switches the DVD+VCR ON and OFF . d CH ( V V / v v ) To scan up or down through memorized channels. e Z Z DVD Opens or closes the disc tray .
8 POWER Switches DVD+VCR ON and OFF . OPEN/CLOSE Opens and closes the disc tray . EJECT Ejects the tape in the VCR deck. TV/VCR To view channels selected by the VCR tuner or by the TV tuner . DVD Select the DVD+VCR function mode to DVD. VCR Select the DVD+VCR function mode to VCR.
9 Introduction a ANT .IN Connect the VHF/UHF/CA TV antenna to this terminal. b VCR IN LINE 1 (VIDEO/AUDIO (Left/Right)) Connect the audio/video output of an external source (Audio system, TV/Monitor , VCR, Camcorder). c DVD/VCR OUT (VIDEO/AUDIO (Left/Right)) Connect to a TV with video and audio inputs.
10 Connecting an Connecting an Antenna Antenna or Cable TV or Cable TV a a Antenna : Disconnect the antenna from the rear of the TV and identify the antenna cable. If it is a round 75 ohm coaxial cable connect it directly to the jack marked ANT .IN on your DVD+VCR.
11 Preparation RF coaxial connection Connect the RF .OUT jack on the DVD+VCR to the antenna in jack on the TV using the supplied 75-ohm Coaxial Cable (R) . How to set the DVD+VCR’ s RF output channel 1. When the DVD+VCR is turned off, press and hold CH ( V/v ) on the front panel for more than five seconds.
12 Connection to an Connection to an Amplifier Amplifier Y ou can only listen to DVD playback using COAXIAL (X) and AUDIO OUT (A2) connections. The tuner and VCR will still be heard through the RF .OUT (R) or DVD/VCR AUDIO OUT (A1) jack. (See page 10.
13 Preparation Initial Settings - VCR Initial Settings - VCR By using the VCR Setup menu, you can make various adjustments to items such as clock setting, and timer recordings. Y our DVD+VCR allows remote control adjustment of several features. General Operation 1.
14 TUNING This DVD+VCR is equipped with a frequency synthe- sized tuner capable of receiving up to 181 channels. These include VHF channels 2-13, UHF channels 14-69 and CA TV channels 1-125. Auto Channel Programming 1. Choose the SOURCE SELECT option, then use b / B to select TUNER.
15 Preparation Displaying Disc Information Displaying Disc Information on-screen - DVD on-screen - DVD Y ou can display various information about the disc loaded on-screen. 1. Press DISPLA Y to show various playback infor- mation. The items displayed differ depending on the disc type or playing status.
16 LANGUAGE Menu Language Select a language for the VCR and DVD’s setup menu and information display . Disc Audio / Subtitle / Menu Select the language you prefer for the audio track (disc audio), subtitles, and the disc menu. Original : Refers to the original language in which the disc was recorded.
17 Preparation AUDIO Each DVD disc has a variety of audio output options. Set this unit’s AUDIO options according to the type of audio system you use. Dolby Digital / DTS / MPEG Bitstream: Select “Bitstream” if you connect the DVD+VCR’s DIGIT AL AUDIO OUT jack to an amplifier or other equipment with a Dolby Digital, DTS or MPEG decoder .
18 LOCK (Parental Control) Rating Some movies contain scenes that may not be suitable for children to view . Many of these discs contain parental control information that applies to the complete disc or to certain scenes on the disc. Movies and scenes are rated from 1 to 8, depending on the area.
19 Operation This chapter describes how to operate the VCR and DVD. VCR T VCR T ape Playback ape Playback Press the VCR button to select the device to be oper- ated.
20 Slow Motion 1. While in still mode, press FORW ARD ( M ). The tape is played at a speed 1/19 times slower than the normal speed. 2. Use CH/TRK ( v / V ) on the Remote Control if necessary to adjust the tracking. 3. T o return to the normal speed, press PLA Y ( N ).
21 Operation VCR T VCR T ape Recording ape Recording Basic Instructions 1. Turn on the DVD+VCR and TV . 2. Tune the TV to the DVD+VCR output channel (CH 3 or 4) or if a direct VIDEO/AUDIO connec- tion is made between the DVD+VCR and the TV , set the TV’ s source selector to VIDEO.
22 CHANNEL: Select a TV channel, LINE1 or LINE2. If you have CABLE TV and use a cable box (con- verter) you must set the channel to match the cable box output channel (usually CH 3 or 4).
23 Operation Instant Timer Recording With this feature you can record for a preset length without using the program timer . 1. Turn on DVD+VCR and the TV . 2. Be sure the TV is tuned to the DVD+VCR output channel (CH 3 or 4). If a direct VIDEO/AUDIO connection is made between the DVD+VCR and the TV , set the TV’s source selector to VIDEO.
24 Copying from DVD to VCR Y ou can copy the contents of a DVD to a VHS tape. 1. Insert the disc you wish to copy into the DVD deck and close the disc tray . 2. Insert a blank VHS video tape into the VCR deck. 3. Find the place on the DVD from which you want to start dubbing using the PLA Y , FF , REW and P AUSE functions.
25 Operation Additional VCR Information Additional VCR Information • During manual recording, timer recording, Instant T imer Recording, playback, or fast forward modes, the DVD+VCR automatically starts rewinding the tape at the end of the tape. The cassette stops at the beginning of the tape and is ejected.
26 Operations - DVD Playback Setup Playback Setup T urn the TV on and select the video input source connected to this unit. Audio System: T urn the Audio System on and select the input source connected to this unit. 1. Press OPEN/CLOSE ( Z ) to open the disc tray .
Operation 27 Buttons Operations ZOOM During playback or pause mode, press ZOOM to enlarge the video image (4 steps). Y ou can move through the zoomed picture using bBvV buttons. Press CLEAR to exit. Note: Zoom may not work on some DVDs. RANDOM During playback or in stop mode, press RANDOM for ran- dom playback.
28 Marker Search To enter a Marker Y ou can start playback from up to nine memorized points. T o enter a marker , press MARKER at the desired point on the disc. The Marker icon appears on the TV screen briefly . Repeat to enter up to nine markers. To Recall or Clear a Marked Scene 1.
29 Operation Playing an Playing an Audio CD or Audio CD or MP3/WMA MP3/WMA file file This unit can play Audio CDs or MP3/WMA files recorded media. MP3/ WMA/ Audio CD Once you insert an MP3/WMA files recorded media or Audio CD, a menu appears on the TV screen.
30 V V iewing a JPEG Disc iewing a JPEG Disc Using this DVD+VCR you can view discs with JPEG files. 1. Insert a disc and close the tray . The PHOTO menu appears on the TV screen. 2. Press v / V to select a folder , and press ENTER/OK. A list of files in the folder appears.
31 Operation Playing a DivX Movie file Playing a DivX Movie file Using this DVD+VCR, you can play DivX file. 1. Insert a DivX file recorded media. The MOVIE menu appears on the TV screen. 2. Press v / V to select a folder , and press ENTER. A list of files in the folder appears.
32 Playing a DVD VR format Playing a DVD VR format Disc Disc This unit will play DVD-R/RW discs recorded using the DVD-Video format that have been finalized using a DVD-recorder . • This unit will play DVD-RW discs recorded using the Video Recording (VR) format.
33 Reference Reference Area Code Afghanistan AF Argentina AR Australia AU Austria A T Belgium BE Bhutan BT Bolivia BO Brazil BR Cambodia KH Canada CA Chile CL China CN Colombia CO Congo CG Costa Rica .
34 T T roubleshooting roubleshooting Symptom No power . The power is on, but the DVD+VCR does not work. No picture. No sound. The playback picture is poor . The “PROGRESSIVE SCAN MODE” message remains to be displayed. Cause The power cord is disconnected.
35 Reference Symptom The DVD+VCR does not start playback. V ideo tape cannot be inserted. No Hi-Fi sound The remote control does not work properly . Camcorder image is not shown. Camcorder image via AV input to DVD+VCR is not shown on TV screen. T imer recording is not possible.
36 General Power requirements 120V , 60 Hz Power consumption 16 W Dimensions (approx.) 16.9" X 3.1" X 10.4" (430 X 78.5 X 265 mm) (w x h x d) W eight (approx.
37.
Zenith will repair or replace your product, at Zenith’s option, if it proves to be defective in material or workmanship under normal use, during the warranty period (“W arranty Period”) listed below , effective from the date (“Date of Installation”) of original consumer purchase of the product.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté LG Electronics XBV613 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du LG Electronics XBV613 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation LG Electronics XBV613, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le LG Electronics XBV613 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le LG Electronics XBV613, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du LG Electronics XBV613.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le LG Electronics XBV613. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei LG Electronics XBV613 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
