Manuel d'utilisation / d'entretien du produit 32LD450 du fabricant LG Electronics
Aller à la page of 142
Lifds Good LCD TV OWNER'S MANUAL 19LD350 32LD450 42LD520 22LD350 37LD450 47LD520 26LD350 42LD450 55LD520 32LD350 47LD450 32LD320 42LD420 47LD420 Please read this manual carefully before operating your set and retain it for future reference. The model and serial number of the TV is located on the back and one Record it bel, service.
WARNING / CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. TO REDUCE THE RISK OFFIRE AND ELECTRIC RAIN OR MOISTURE, This reminder is provided to call the CATV system installer's attention to Article 820-40 of the National Electric Code (U.
SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. O Do not use this apparatus near water. O Clean only with dry cloth. O Do not block any ventilation openings.
SAFETY INSTRUCTIONS Never touch this apparatus or antenna during a thunder or lighting storm. 0 0 0 When mounting a TV on the wall, make sure not to install the TV by the hanging power and signal cables on the back of the TV. Do not allow an impact shock or any objects to fall into the product, and do not drop onto the screen with something.
@ ANTENNAS Outdoor antenna grounding If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not be located in the vicinity of over- head power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur.
CONTENTS WARNING / CAUTION ............................ 2 SAFETY INSTRUCTIONS .......................... 3 FEATURE OF THIS TV ............................... 8 Accessories ...................................................... 9 Front Panel Information .
Auto Volume Leveler (Auto Volume) ................. 88 Clear Voice II .................................................. 89 Preset Sound Setting (Sound Mode) ................ 90 Sound Setting Adjustment - User Mode ........... 91 Balance .............
FEATURE OF THIS TV High-definition television. High-resolution digital i_ _'i. j[_ _ _I' television broadcast and playback system composed of roughly a million or more pixels, 16:9 aspect-ratio screens, and AC3 digital audio. A subset of digital television, HDTV formats include 1080i and 720p resolutions.
PREPARATION ACCESSORIES Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the TV.
PREPARATION FRONT PANEL INFORMATION ,,,I Image shown may differ from your TV. _e m _e © z 19/22LD350 MENU Button INPUT Button POWER Button ENTER Button VOLUME (-, +) Buttons CHANNEL (v, ^) Buttons SP.
""_ Image shown may differ from your TV. 32/37/42/47LD450 SPEAKER CHANNEL ( ^, v) Buttons __ VOLUME (+,-) Buttons Button Button Button POWER Button _e m _e 0 z Remote Control Sensor )ower/Standby Indicator llluminates red in standby mode. llluminates blue when the TV is switched on.
PREPARATION BACK PANEL INFORMATION ,,,I Image shown may differ from your TV. "O _o m _o © z 19/22LD350 iiiiiiiiiii iiiiiiiiii _ iiiiiiiiii iiiiiiiiiii iiiiiiiiiii iiiiiiiiiii iiiiiiiiiii L 26LD350 12 Downloaded From TV-Manual.
""_ Image shown may differ from your TV. _e m _e © z 32LD350 13 Downloaded From TV-Manual.com Manuals.
PREPARATION ,,,I Image shown may differ from your TV. _e m _e © z @ 32/37/42/47LD4S0 14 Downloaded From TV-Manual.com Manuals.
_D rT1 _D © z O HDMI/DVI IN, HDMI IN Digital Connection. Supports HD video and Digital audio. Doesn't support 480i. Accepts DVl video using an adapter or HDMI to DVl cable (not included). @ RGB IN (PC) Analog PC Connection. Uses a D-sub 15 pin cable (VGA cable).
PREPARATION STAND INSTRUCTIONS (For 19/22LD350) ,,,I Image shown may differ from your TV. -O _o m _o © z INSTALLATION O Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. O Assemble the TV as shown until you hear it click.
DETACHMENT O Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. Loose the bolts from TV. Detach the stand from TV. PROTECTION COVER O Insert the PROTECTION COVER into the TV. Fix the 4 bolts securely using the holes in the back of the TV.
PREPARATION STAND INSTRUCTIONS (For 26/32LD350) ,,,I Image shown may differ from your TV. "O © z INSTALLATION O Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. O Assemble the parts of the STAND BODY with COVER BASE of the TV by using the 4 screws supplied.
DETACHMENT O Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. m © z Loose the bolts from TV. 0 Detach the stand from TV. PROTECTION COVER After removing the stand, install the included protection cover over the hole for the stand.
STAND INSTRUCTIONS (For 32/37/42/47LD450) -O _o _o © z INSTALLATION O Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. 0 Assemble the TV as shown. Fix the 4 bolts securely using the holes in the back of the TV.
DETACHMENT O Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. "0 _o _o © z Loose the bolts from TV. Detach the stand from TV. O PROTECTION COVER After removing the stand, install the included protection cover over the hole for the stand.
PREPARATION r'rl © z VESA WALL MOUNTING Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please contact your nearest installer. If installed on a ceiling or slanted wall, it may fall and result in severe personal injury.
CABLE MANAGEMENT ,,,I Image shown may differ from your TV. For 19/22LD350 O fter connecting the cables as necessary, install CABLE HOLDER as shown and bundle the cables.
PREPARATION m © z CABLE MANAGEMENT ,,,I Image shown may differ from your TV. For 26/32LD350, 32/37/42/47LD450 O onnect the cables as necessary. To connect additional equipment, see the EXTERNAL EQUIPMENT SETUP section. O the CABLE MANAGEMENT CLIP Open as shown.
SWIVEL STAND (Except 19/22LD3S0) After installing the TV, you can adjust the TV set manually to the left or right direction by 20 degrees to suit your viewing position. . .: ...._--_:-_-__-----.,......_ _. -- . .. --I_Z_Z_.._Z_I.. o.- P "0 m © z POSITIONING YOUR DISPLAY (For 19/22LD3S0) ,,,I Here shown may be somewhat different from your TV.
PREPARATION DESKTOP PEDESTAL INSTALLATION -0 _o l'rl _o © z ,,,I Image shown may differ from your TV. For proper ventilation, allow a clearance of 4 inches on all four sides from the wall. 4 inches 4 inches 4 inches 4 inches 26 Downloaded From TV-Manual.
ATTACHING THE TV TO A DESK (Except 19/22LD3S0) The TV must be attached to a desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product. 1 -Screw (provided as parts of the product) Desk _D rT1 _D 0 z KENSINGTON SECURITY SYSTEM ,,,I This feature is not available for all models.
PREPARATION m © z SECURING THE TV TO THE WALL TO PREVENT FALLING WHEN THE TV IS USED ON A STAND You should purchase necessary components to prevent the TV from tipping over (when not using a wall mount). ,,,i Image shown may differ from your TV. We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards.
,,,I To prevent damage do not connect to the power outlet until all connections are made between the devices. ""_ Image shown may differ from your TV. ANTENNA OR CABLE CONNECTION 1. Antenna (Analog or Digital) Wall Antenna Socket or Outdoor Antenna without a Cable Box Connections.
EXTERNAL EQUIPMENT SETUP ,,,_ To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. This part of EXTERNAL EQUIPMENT SETUP mainly use picture for 32LD350. HD RECEIVER SETUP This TV can receive digital over-the-air/digital cable signals without an external digital set-top box.
HDMI Connection 1. How to connect O Connect the digital set-top box to the HDMI/DVI IN or HDMI/DVl IN 1/2" jack on the TV. e No separate audio connection is necessary. HDMI supports both audio and video. 2. How to use ,l_ Turn on the digital set-top box.
EXTERNAL EQUIPMENT SETUP DVI to HDMI Connection 1. How to connect m x m _o z m X:) c "O m z m c "O O Connect the DVI output of the digital set-top box to the HDMI/DVl IN or HDMI/DVl IN 1 jack on the TV. O Connect the digital set-top box audio output to the AUDIO IN (RGB/DVl) jack on the TV.
DVD SETUP Component Connection 1. How to connect O Connect the video outputs (Y, PB, PR) of the DVD to the COMPONENT IN VIDEO jacks on the TV. Match the jack colors (Y = green, PB = blue, and PR = red). O Connect the audio outputs of the DVD to the COMPONENT IN AUDIO jacks on the TV.
EXTERNAL EQUIPMENT SETUP Composite (RCA) 1. How to connect Connection x z X:) c z c "0 O Connect the AUDIO/VIDEO jacks between TV and DVD. Match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red). 2. How to use ,l_ Turn on the DVD player, insert a DVD.
VCR SETUP Antenna Connection 1. How to connect O Connect the RF antenna out socket of the VCR to the ANTENNA/CABLE IN sock- et on the TV. O Connect the antenna cable to the RF antenna in socket of the VCR. 2. How to use 01_ Set VCR output switch to 3 or 4 and then tune TV to the same channel number.
EXTERNAL EQUIPMENT SETUP Composite (RCA) Connection m x m _o z _> m X:) c "O m z m c "O 1. How to connect O Connect the AUDIO/VIDEO jacks between TV and VCR. Match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red).
OTHER A/V SOURCE SETUP 1. How to connect 0 Connect the AUDIO/VIDEO jacks between TV and external equipment. Match the jack colors. (Video = yellow, Audio Left = white, and Audio Right = red) 2. How to use 01_ Select the AV2 _ input source on the TV using the INPUT button on the remote control.
EXTERNAL EQUIPMENT SETUP AUDIO OUT CONNECTION x .-I l'rl z _0 c l'rl z .-I .-I c Send the TV's audio to external audio equipment via the Audio Output port. If you want to enjoy digital broadcasting through 5.1 -channel speakers, connect the OPTICAL DIGITAL AUDIO OUT terminal on the back of TV to a Home Theater (or amp).
PC SETUP This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. VGA (D-Sub 15 pin) Connection 1. How to connect O onnect the VGA output of the PC to the RGB IN (PC) jack on the TV. O Connect the PC audio output to the AUDIO IN (RGB/DVI) jack on the TV.
EXTERNAL EQUIPMENT SETUP DVI to HDMI Connection 1. How to connect m x m _o z m X:) c "0 m z m c "0 Connect the DVI output of the PC to the HDMI/DVI IN or HDMI/DVI IN 1 jack on the TV. O Connect the PC audio output to the AUDIO IN (RGB/DVl) jack on the TV.
Supported Display Specifications (RGB-PC, HDMm-PC) m X rT1 _o z rT1 XD C "O rT1 z rT1 --4 C -O For 19122/26/32LD350 31.469 70.08 31.469 70.08 31.469 59.
EXTERNAL EQUIPMENT SETUP Screen Setup for PC mode m x m _o z m X:) c m z m c "0 Selecting Resolution You can choose the resolution in RGB-PC mode. The Position, Phase, and Size can also be adjusted. You can use this function only when the PC resolution is set to 1024X768, 1280X768 or 1360X768.
Auto Configure Automatically adjusts picture position and minimizes image instability. After adjustment, if the image is still not correct, try using the manual settings or a different resolution or refresh rate on the PC. r'_ x m z m c m z m c Select PICTURE.
EXTERNAL EQUIPMENT SETUP m x m z m _D c m z m c Adjustment for screen Position, Size, and Phase If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust the picture phase manually. This feature operates only in RGB-PC mode.
Screen Reset (Reset to original factory values) Returns Position, Size, and Phase to the default factory settings. This feature operates only in RGB-PC mode.
WATCHING TV / CHANNEL CONTROL REMOTE CONTROL FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. -r" z < N I > z z fT1 N © Z © POWER ENERGY SAVING AV MODE INPUT TV VOLUME UP /DOWN MARK FAV RATIO MUTE CHANNEL UP/DOWN PAGE UP/DOWN Turns the TV on from standby or off to standby.
NUMBER button -- (DASH) LIST FLASHBK MENU INFO Q.MENU THUMBSTICK (Up/Down/Left Right/ENTER) RETURN SIMPLINK EXIT Used to enter a program number for multiple program channels such as 2-I, 2-2, etc. Displays the channel table. _ p.56 Tunes to the last channel viewed.
WATCHING TV / CHANNEL CONTROL TURNING ON THE TV z < N -r > z z fT1 N © Z © @ @ First, connect power cord correctly. At this moment, the TV switches to standby mode. 01_ In standby mode to turn TV on, press the (b/I , INPUT, CH (AT or ^ v ) button on the TV or press the POWER, INPUT, CH (^ or v),Number (0~9) button on the remote control.
INITIAL SETTING This Function guides the user to easily set the essential items for viewing the TV for the first time when pur- chasing the TV. It will be displayed on the screen when turning the TV on for the first time. It can also be acti- vated from the user menus.
WATCHING TV / CHANNEL CONTROL ON-SCREEN MENUS SELECTION Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual. 19/22/26LD350 z c_ < N -r > Z Z fT1 N 0 Z 0 For USA For Canada Display each menu. Select a menu item.
32LD350,32/37/42/47LD450 I _ii_ililiiii!i_!_i!!_!!_!_ii!_!i i!i!!_!!_!!_!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!_i_!i!%!_!i!i_!_!ii_!_ , i!!i!iiii!ii_i_i!_iii_i_!_ i_iiiiiii_iii_!i_!_!_!_!_!_!_!_!_!_!!_!.
WATCHING TV / CHANNEL CONTROL QUICK MENU Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual. Q.Menu (Quick Menu) is a menu of features which users might use frequently. N -r" z < N I > z z fT1 N © Z © [] [] ((o)) ((o)) Gf z [] e_ Aspect Ratio: Selects your desired picture format.
CHANNEL SETUP Auto Scan (Auto Tuning) Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the channel list. Run this function if you change your residence or move the TV. Also, make sure to run this function with the antenna connected during TV broadcasting hours.
WATCHING TV / CHANNEL CONTROL Add/Delete Channel (Manual Tuning) When selecting DTV or CADTV input signal, you can view the on-screen signal strength monitor to see the qual- ity of the signal being received.
Channel Editing The channels in the Channel Edit List are displayed in black and the channels deleted from the Channel Edit List are displayed in blue. When a channel number is deleted, it means that you will be unable to select it using CH ^ v button during TV viewing.
WATCHING TV / CHANNEL CONTROL CHANNEL LIST You can check which channels are stored in the memory by displaying the channel list. z < N -r > z z fT1 N © Z © This padlock is displayed when the channel is locked with parental control. Displaying Channel List Display the Channel List.
FAVORITECHANNEL SETUP Favorite Channels are a convenient feature that lets you quickly select channels of your choice without waiting for the TV to select all the in-between channels. To tune to a favorite channel, press the FAV (Favorite) button repeatedly.
WATCHING TV / CHANNEL CONTROL FAVORITECHANNEL LIST ('h "-r" z < N -r > z z fT1 N © Z © Displaying the favorite channel list Display the Favorite channel list. Selecting a channel in the favorite channel list Select a channel. Switch to the chosen channel number.
BRIEF INFORMATION Brief Info shows the present screen information. Show the Brief Info on the screen. Return to TV viewing. @ @ Multilingual : The program contains two or more audio services. Use the Q.MENU menu to select wanted Audio. Caption : The program contains one or more caption services.
WATCHING TV / CHANNEL CONTROL ('h -r" z < N -r > z z fT1 N © Z © INPUT LIST Only these input signals which are connected to a TV can be activated and selected. ,NPUT _ Select the desired input source. __ _ 32LD350: You can also select the desired input source in the INPUT menu.
INPUT LABEL This indicates which device is connected to which input port. With 19/22LD350 iiiiiiiiiiiiiiiiiiiiiiiiiii !iilil ¸i ¸i¸ il¸ !iiil ¸i]!i !!!!!!i_!: i) ii!iiiil iiiiiiiiiiil i¸ili ¸i ¸i ¸ii ¸i ¸i¸ i¸i!ii ¸ iiii!!(i!! 26/32LD350 using OPTION menu With using INPUT button Select OPTION.
WATCHING TV / CHANNEL CONTROL AV MODE N "l- z < N I > z z fT1 N © Z © AV Mode toggles through preset Video and Audio settings. i iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii _i_i_i!iiiiiii.
KEY LOCK The TV can be set up so that it can only be used with the remote control. This feature can be used to prevent unauthorized viewing by locking out the front panel controls. This TV is programmed to remember which option it was last set to even if you turn the TV off.
WATCHING TV / CHANNEL CONTROL €_ImPLInK SIMPLINK allows you to control and play other AV devices connected with HDMI cable without additional cables and settings. This TV may work with devices with HDMI-CEC support, but only devices with the _)mp-,nK logo are fully supported.
SIMPLINK Functions Direct Play: After connecting AV devices to the TV, you can directly control the devices and play media with- out additional settings.
USB (For 33LD350, 33/37/42/47LD450) ENTRY MODES When you connect a USB device, this pop up menu is displayed automatically. When the Pop Up menu does not appear, you can select Photo List or Music List in the USB menu. In USB device, you can not add a new folder or delete the existing folder.
PHOTO LIST You can view .JPG files from USB storage devices. The On Screen Display on your model may be slightly different. Supported photo file: *.JPG You can play JPG files only. Only baseline scan is supported amongJPG. Available JPG size (width x height, pixel): 64 x 64 - 15360 x 8640 c Screen Components Select USB.
USB Photo Selection and Popup Menu C ._Navigation _ Popup Menu .=_Navigation _ Popup Menu CH Page Change Mark CH Page Change Mark ct% Exit ct-_ Exit When you select a file (not folder), this PopUp menu is displayed. _, Vie_. Display the selected item.
Full Screen Menu You can change the Photo List view so that it fills the screen. More operations are available in full screen mode. _:_Navigation _;PopupMenu CH PageChange Mark (_% Exit $ The aspect ratio of a photo may change the size of the photo displayed on the screen in full size.
USB Select the Slideshow, BGM, (Rotate), Delete, Option, or Hide. C L_ m Use A v < > button to select and control the menu on the full_sized screenl _ Slideshow: Selected photos are displayed during the slide show. If no photo is selected, all photos in the cur- rent folder are displayed during slide show.
MUSIC LIST You can use the Music List menu to play MP3 files from a USB storage device. This TV cannot play back copy-protected files. The On Screen Display on your model may be slightly different. Supported music file: *.MP3 Bit rate range 32 Kbps - 320 Kbps • Sampling rate (Sampling Frequency) MPEG1 layer 3:32 kHz, 44.
USB Music Selection and Popup Menu C oo Navigation (_ Popup Menu CH Page Change Mark _% Exit $ _Navigation _ Popup Menu CH Page Change Mark ct_ Exit _, Play (During stop): Play the selected music. Once a song finishes playing, the next selected one will be played.
The play information box (as shown below) will automatically move across the screen when there is no user input to pre- vent a fixed image remaining on the screen for a extended period of time. c o_ NOTE ,_ When music is playing, _ is displayed in front of the music play time.
PICTURE CONTROL PICTURE SIZE (ASPECT RATIO) CONTROL This feature lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV. HDMI/RGB-PC input source use 4:3 or 16:9 aspect ratio. But you can select all aspect ratios in HDMI-PC 1920X1080 input.
16:9 Adjust the picture horizontally, in a linear pro- portion to fill the entire screen. Just Scan Normally the edges of video signals are cropped 1-27o. Just Scan turns off this cropping and shows the complete video. Notes: If there is noise on the edges of the original signal, it will be visible when Just Scan is activated.
PICTURE CONTROL PICTURE WIZARD c _D I'tl © z _D © 76 This feature lets you adjust the picture quality of the original image. Use this to calibrate the screen quality by adjusting the Black and White Level etc. You can calibrate the screen quality by easily following each step.
Adjust Vertical Sharpness. Adjust Color Temperature. Adjust Dynamic Contrast. Adjust Color Gain. 1 Adjust Backlight. Select input source to apply the settings. Save. Finish the Picture Wizard. 01_ If you stop the setting before the final step, the changes will not be saved to the TV.
PICTURE CONTROL PRESET PICTURE SETTINGS (PICTURE MODE) There are factory presets for picture settings available in the user menus. You can use a preset, change each setting manually.
MANUAL PICTURE ADJUSTMENT- USER MODE Adjust the picture appearance to suit your preference and viewing situations. !i!i!i,iiiiil ¸II ¸_i_ii_iiiiiii_ii_ii_i[iiiii_ii_!_ii_iii[[i_i_iiii[Iiii_iii_i!i_i.
PICTURE CONTROL PICTURE IMPROVEMENT TECHNOLOGY You can calibrate the screen for each Picture Mode or set the video value according to the special video screen.
EXPERTPICTURE CONTROL By segmenting categories, Expert1 and Expert2 provide more categories which users can set as they see fit, offering the optimal picture quality for users. This may also be used be a professional to help optimize the TV performance in the environment the TV is in.
PICTURE CONTROL "O N C _D m N © Z _D © ,_, Set to warm to enhance hotter colors such as red, or set to cool to make picture bluish. i,i,i Adjusts the contrast to keep it at the best level according to the brightness of the screen. The picture is improved by making bright parts brighter and dark parts darker.
Standard: Displays standard set of colors. Wide: Increase number of colors used. Maximize the utilization of color to increase color quality. Show clearer and distinctive yet natural edges in of the video. This function is enabled in "Picture Mode - Cinema, Expert".
PICTURE CONTROL ENERGY SAVING It reduces the TV's power consumption by lowering the backlight level. The default factory setting complies with the Energy Star requirements and is adjusted to the comfortable level to be viewed at home.
PICTURE RESET Settings of the selected picture modes return to the default factory settings. Select PICTURE. Select Picture Reset. "O N C m N O Z O Select Yes.
PICTURE CONTROL POWER INDICATOR-Ex_pt 19/22LO3SO Adiust the power/standby indicator light of TV front. "0 _h C rtl _h © Z © Select OPTION. Select Power Indicator. Select Standby Light or Power Light. 01_ Standby Light: Determines whether to set the indicator light on the front of the TV to On or Off in standby mode.
DEMO MODE Displays a slide show to explain the various feature of this TV. Select OPTION. Select Demo Mode. 01_ This feature is disabled in "Initial Setting-Home Use". c _o m © z _o © Select On to show the various feature of the TV. Return to TV viewing.
SOUND & LANGUAGE CONTROL AUTO VOLUME LEVELER (AUTO VOLUME) Auto Volume makes sure that the volume level remains consistent whether you are watching a commercial or a regular TV program. Because each broadcasting station has its own signal conditions, volume adjustment may be needed every time the channel is changed.
CLEAR VOICE II By differentiating the human sound range from others, it improves the sound quality of voices. iiMii!!iiiiii_iiii_iiii_iii_I_iii!iiiiii_iiiiiIii!iiiiiii_i_iiiiiiiiiii_!jii?iiii_iiiiii!_.
SOUND & LANGUAGE CONTROL PRESET SOUND SETTINGS (SOUND MODE) Sound Mode lets you enjoy the best sound without any special adjustment as the TV sets the appropriate sound options based on the program content. 0 c Z z c l'rl N 0 Z .-I 0 Select AUDIO.
SOUND SETTING ADJUSTMENT- USER MODE Adjust the sound to suit your taste and room situations. Select AUDIO. Select Sound Mode. Select Standard, Music, Cinema, Sport, or Game. Select Treble or Bass. INFINITE SOUND Select this option to sound realistic. Select AUDIO.
SOUND & LANGUAGE CONTROL BALANCE Adjust the left/right sound of speaker to suit your taste and room situations. _i_iiiiii_ii_iiiii_:_iiiiiiii_iiiiiiiYiiiiii!!iii_Yi_i_i_i_i_iiiiiiiiiIii_iiiiii!!i_.
TV SPEAKERS ONIOFF SETUP Turn the TV speakers off if using external audio equipment. In AV, Component, RGB and HDMI with HDMI to DVl cable, the TV speaker can be operational even when there is no video signal. If you wish to use an external Hi-Fi system or a SRS System, turn offthe TV's internal speakers.
SOUND & LANGUAGE CONTROL AUDIO RESET Settings of the selected Sound Mode return to the default factory settings. 0 c z z c l'rl N 0 Z .-I 0 Select AUDIO. Select Reset. Initialize the adjusted value. Return to TV viewing. 94 Downloaded From TV-Manual.
STEREO/SAP BROADCAST SETUP For Analog only: This TV can receive MTS stereo programs and any SAP (Secondary Audio Program) that accom- panies the stereo program if the station transmits an additional sound signal. Mono sound is automatically used if the broadcast is only in Mono.
SOUND & LANGUAGE CONTROL AUDIO LANGUAGE Other languages may be available if a digital signal is provided by the broadcasting station. This feature operates only in DTV/CADTV mode. 0 c Z _o z c l'rl N 0 Z .-I 0 Select OPTION. Select Audio Language.
ON-SCREEN MENUS LANGUAGE SELECTION The menus can be shown on the screen in the selected language. i Select OPTION. Select Menu Language. Select your desired language. From this point on, the on-screen menus will be shown in the selected language. Return to the previous menu.
SOUND & LANGUAGE CONTROL CAPTION MODE Analog Broadcasting System Captions Captions are provided to help people with hearing loss watch TV. Select a caption mode for displaying cap- tioning information if provided on a program. Analog caption displays information at any position on the screen and is usually the program's dialog.
Digital Broadcasting System Captions Choose the language you want the DTV/CADTV Captions to appear in. Other Languages can be chosen for digital sources only if they are included on the program. This function in only available when Caption Mode is set On.
SOUND & LANGUAGE CONTROL Caption Option Customize the DTV/CADTV captions that appear on your screen. This function in only available when Caption Mode is set On. O c Z _o z c l'rl N 0 Z .-I 0 Select OPTION. Select Caption. Select O n. Select Digital Option.
TIME SETTING CLOCK SETTING Auto Clock Setup The time is set automatically from a digital channel signal. The digital channel signal includes information for the current time provided by the broadcasting station. Set the clock manually if the current time is set incorrectly by the auto clock function.
TIME SETTING Manual Clock Setup If the current time setting is wrong, reset the clock manually. If this TV is unplugged once or turn off with the AC power control switch on the TV, reset the Clock function. Select TIME. m m z Select Clock. Select Manual.
AUTO ON/OFF TIME SETTING This function operates only if the current time has been set. The Off Time function overrides the On Time function if they are both set to the same time.
TIME SETTING SLEEP TIMER SETTING The Sleep Time turns the TV off at the preset time. Note that this setting is cleared when the TV is turned off. iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii m m z Select TIME.
PARENTAL CONTROL / RATINGS Parental Control can be used to block specific channels, ratings and other viewing sources. The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broad- casting station. The default setting is to allow all programs to be viewed.
PARENTAL CONTROL / RATINGS Lock System Enables or disables the blocking scheme you set up previously. Select LOCK. Input the password. 01_ When you select O n, the Lock System is enable. _o m z N © z _o © _o z Select Lock System. Select On or Off. Return to the previous menu.
Set Password Change the password by inputting a new password twice. Select LOCK. Z Input the password. Select Set Password. Choose any 4 digits for your new password. As soon as the 4 digits are entered, re-enter the same 4 digits on the Confirm. Return to the previous menu.
PARENTAL CONTROL / RATINGS CHANNEL BLOCKING Blocks any channels that you do not want to watch or that you do not want your children to watch. iiii[i_iiii!!!iiiiii!!i_gi_iiiiii!i_iiiiiiIiiHi_iiiiii[i_iiiiiiiIi_Hiiiiiii!iiiiii_ii!iii_iiiii[i[i_;i;Jiiiiiiiiiiiiii_i_i!iiiiiiiii_iiii_iiii_ii :,:iii!!iiiii/iiiiiiiiiiiiiii:il Ch.
MOVIE & TV RATING Movie Rating (MPAA) - For USA Blocks movies according to the movie ratings limits specified, so children cannot view certain movies. You can set the ratings limit by blocking out all the movies with the ratings above a specified level.
PARENTAL CONTROL / RATINGS TV Rating Children - For USA Prevents children from watching certain children's TV programs, according to the ratings limit set.
TV Rating General- For USA Based on the ratings, blocks certain TV programs that you and your family do not want to view. !ii Select LOCK. Input the password. Select TV Rating-General. Select Age, Dialogue, Language, Sex or Violence. Select block options.
PARENTAL CONTROL / RATINGS TV Rating English - For CANADA Selecting Canadian English rating system. _o r_l z N © z _o © _o z Select LOCK. Input the password. Select TV Rating-English. Select E, C, C8+, G, P G, 1 4+, 1 8+, or Blocking Off. Return to the previous menu.
TV Rating French - For CANADA Selecting Canadian French rating system. __4,, _,_ Select LOCK. Input the password. Select TV Rating-French. Select E, G, 8ans+, 1 3ans+, 1 6ans+, 1 8ans+, or Blocking off. Return to the previous menu. Return to TV viewing.
PARENTAL CONTROL / RATINGS DOWNLOADABLE RATING This function is available only for digital channels. This function operates only when TV has received Region5 Rating data. 01_ Based on rating table, your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual.
EXTERNAL INPUT BLOCKING Enables you to block an input. i!_!_!i,!iiiiiiiiiiiiiii ¸iii!ii_i!_i'i_'ii ¸il ¸ii ¸iii!!iiiiiiiiiii!iii!i!iii'_'_iiiiiiiiiiiiiiiiii!ii _:_:i_iiiii!!iii.
APPENDIX TROUBLESHOOTING Check to see if there is any object between the product and the remote control causing obstruction. Ensure you are pointing the remote control directly at the TV. IMM Ensure that the batteries are installed with correct polarity (+ to +, - to -).
mm_ Press the VOL or VOLUME button. i,i,i Sound muted? Press MUTE button. mini Try another channel. The problem may be with the broadcast. i,i,i Are the audio cables installed properly? i,i,i Adjust Balance in menu option.
MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you can enjoy your new TV. Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen 0 0 Here's a great way to keep the dust offyour screen for a while.
PRODUCT SPECIFICATIONS 18.2 x 13.8 x 6.7 inches 462.4 x 353.0 x 171.0 mm 18.2 x 12.1 x 2.5 inches 462.4 x 308.0 x 65.0 mm 8.3 Ibs / 3.8 kg Z9 Ibs / 3.6 kg 21.0 x 15.6 x 6.7 inches 533.4 x 39Z0 x 171.0 mm 21.0 x 13.8 x 2.5 inches 533.4 x 351.4 x 65.0 mm 10.
m Z C7 X 3Z0 x 26.1 x 11.6 inches 940.8 x 665.2 x 296.2 mm 3Z0 x 23.7 x 3.5 inches 940.8 x 603.5 x 90.6 mm 35.9 Ibs/ 16.3 kg 31.9 Ibs / 14.5 kg 41.4 x 28.3 x 11.6 inches 1052.2 x 719.1 x 296.2 mm 41.5 x 25.8 x 3.5 inches 1052.2 x 65Z3 x 90.8 mm 41.8 Ibs / 19.
IR CODES POWER Remote control Button (Power On/Off t TV Discrete IR Code .... Q.MENU Remote Control Button (TV Input Selection) MENU Remote control Button C4 POWER ON Discrete IR Code OB INPUT Remote €ontrol Button (Only Power On) Number Key 0-9 Remote control Button POWER OFF Discrete IR Code .
EXTERNAL CONTROL THROUGH RS-232C The RS-232C port allows you connect the RS-232C input jack to an external control device (such as a computer or an A/V control system) to control the TV's functions externally. 01_ Note: RS-232C on this unit is intended to be used with third party RS-232C control hardware and software.
RS-232C Configurations Either cable below can be used. RXD TXD GND DTR DSR RTS CTS PC TV D-Sub 9 D-Sub 9 TXD RXD GND DSR DTR CTS RTS Set ID Use this function to specify a TV ID number.
Command Reference List 01 Power k a 02. Input Select x b k c 04. Screen Mute k d ume k e 06. Volume Control k f 07. k g 08. Brightness k h 09 or k i 10. Tint k j 11 k k 12. OSD Select k I O0 - 01 (_ p.125) (p.125) (I,_. p.125) O0 - 01 O0 ~ 64 O0 - 64 O0 ~ 64 O0 - 64 O0 ~ 64 O0 _ 64 O0 ~ 01 k m 00 - 01 1 e k r 00 ~ 64 15.
01. Power (Command: k a) To control Power On/Off of the TV. Transmission[k] [a][] [Set !D] [ ] [Data] [Cr] Data 00: Power Off Data 01 :Power On AcknOwledgement [a][ ] [Set ID] [ ] [OK/NG] [Data] [x] I.
-O -O I"11 Z E3 X 126 11. 12. 13. 14. 15. 16. Sharpness (Command: k k) To adjust screen sharpness. You can also adjust sharpness in the PICTURE menu. TransmisSion [k] [k][] [set ID][] [Data] [Cr] Data Min: O0 - Max: 64 (*transmit by Hexadecimal code) _Refer to 'Real data mapping'.
Data 5: The table above lists the binary code which must be converted toHexadecimal before sending. For example: The binary code totune the sub source toan NTSC cable channel is "1000 0001 ", which translates to "81" in Hex. * 7th bit : For which source do you want to change the channel.
OPEN SOURCE LICENSE- This feature is not available for all models. GNU GENERAL PUBLIC LICENSE Version 2, June 1991 -O -O Z X Copyright (C) 1989, 1991 Free Software Foundation, Inc.
b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part there of, to be licensed as a whole at no charge to all third parties under the terms of this license.
Z C7 X 8. 9. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the con- ditions of this license, they do not excuse you from the con- ditions of this license.
END OF TERMS AND CONDITIONS How to apply these terms to your new programs If you develop a new program, and you want it to be of the great- est possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms.
GNU LESSER GENERAL PUBLIC LICENSE Version 2.1, February 1999 -O -O m Z C7 X Copyright (C) 1991, 1999 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
Although the Lesser General Public License is Less protective of the users' freedom, it does ensure that the user of a program that is linked with the Library has the freedom and the wherewithal to run that program using a modified version of the Library.
Z C7 X 3. 4. 5. You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy of the Library. To do this, you must alter all the notices that refer to this License, so that they refer to the ordinary GNU General Public License, version 2, instead of to this License.
For an executable, the required form of the "work that uses the library" must include any data and utility programs need- ed for reproducing the executable from it.
Z C7 X If the library does not specify a license version number_ you may choose any version ever published by the Free Software Foundation. 14.1f you wish to incorporate parts of the library into other free programs whose distribution conditions are incompatible with these, write to the author to ask for permission.
MOZILLA PUBLIC LICENSE Version 1.1 1 •Definitions• 1.0.1. "Commercial use" means distribution or otherwise making the covered code available to a third party. 1.1. "Contributor" means each entity that creates or con- tributes to the creation of modifications• 1.
Z C7 X (c) the licenses granted in this section 2.1 (a) and (b) are effective on the date Initial developer first distributes original code under the terms of this license.
(c) Representations. contributor represents that, except as disclosed pursuant to section 3.4(a) above, contributor believes that contributor's modifications are contributor's original creation(s) and/or contributor has sufficient rights to grant the rights conveyed by this license.
Z X Z DISCLAIMER OF WARRANTY. COVERED CODE IS PROVIDED UNDER THIS LICENSE ON AN "AS IS" BASIS, WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, WARRANTIES THAT THE COV- ERED CODE IS FREE OF DEFECTS, MERCHANTABLE, FIT 8.
11. MISCELLANEOUS• This license represents the complete agreement concerning subject matter hereof. If any provision of this license is held to be unenforceable, such provision shall be reformed onl.
Downloaded From TV-Manual.com Manuals.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté LG Electronics 32LD450 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du LG Electronics 32LD450 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation LG Electronics 32LD450, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le LG Electronics 32LD450 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le LG Electronics 32LD450, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du LG Electronics 32LD450.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le LG Electronics 32LD450. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei LG Electronics 32LD450 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
