Manuel d'utilisation / d'entretien du produit 32/42/46/52/60LD5 du fabricant LG Electronics
Aller à la page of 220
www .lg. com O WNER’S MANU AL L CD T V / LED L CD T V Please re ad this manual carefully bef or e operating your se t and retain it for future r ef erence.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or regis- tered trademarks of HDMI Licensing LLC. W all Mounting Bracket Separate purchase (19/22/26/32LD3 *** , 32LD4 *** ,.
I CONTENTS CONTENTS PREP ARA TION LCD TV Models : 19/22/26/32LD35 **, 19/22/26/32LD34 ** .......................................... A-1 LCD TV Models : 32/37/42/47LD4 *** , 26/32LD32 ** 26/32LD33 ** ....................................................
II CONTENTS CONTENTS PICTURE CONTROL Picture Size (Aspect Ratio) Control ..................92 Picture Wizard ................................................... 94 Energy Saving ................................................... 95 Preset Picture Settings .
A-1 PREP ARA TION PREP ARA TION ACCESSORIES LCD TV MODELS : 19/22/26/32LD35 ** , 19/22/26/32LD34 ** Ensure that the following accessories are included with your TV . If an accessory is missing, please contact the dealer where you purchased the TV . ■ Image shown may differ from your TV .
A-2 PREP ARA TION PREP ARA TION FRONT P ANEL CONTROLS ■ Image shown may differ from your TV . NOTE ► TV can be placed in standby mode in order to reduce the power consumption. And TV should be switched off using the power switch on the TV if it will not be watched for some time, as this will reduce energy consumption.
A-3 PREP ARA TION BACK P ANEL INFORMA TION ■ Image shown may differ from your TV . Power Cord Socket This TV operates on an AC power . The volt- age is indicated on the Specifications page. ( ► p.137 to 147) Never attempt to operate the TV on DC power .
A-4 PREP ARA TION PREP ARA TION ■ Image shown may differ from your TV . Power Cord Socket This TV operates on an AC power . The volt- age is indicated on the Specifications page. ( ► p.137 to 147) Never attempt to operate the TV on DC power . HDMI/DVI IN Input Connect an HDMI signal to HDMI IN.
A-5 PREP ARA TION Only 32LD35 ** , 32LD34 ** ■ Image shown may differ from your TV . Power Cord Socket This TV operates on an AC power . The volt- age is indicated on the Specifications page. ( ► p.137 to 147) Never attempt to operate the TV on DC power .
A-6 PREP ARA TION PREP ARA TION ST AND INST ALLA TION Only 19/22LD35 ** , 19/22LD34 ** ■ Image shown may differ from your TV . When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully , the product can tilt forward after the product installation.
A-7 PREP ARA TION ■ Image shown may differ from your TV . When installing the wall-mounted unit, use the protection cover . NOT USING THE DESK-TYPE ST AND Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.
A-8 PREP ARA TION PREP ARA TION Connect the cables as necessary . T o connect additional equipment, see the External Equipment Setup section. 1 Open the Cable Management Clip as shown.
A-9 PREP ARA TION SWIVEL ST AND (Except for 19/22LD35 ** , 19/22LD34 ** ) ■ Image shown may differ from your TV . After installing the TV , you can adjust the TV set manually to the left or right direction by 20 degrees to suit your viewing position.
A-10 PREP ARA TION PREP ARA TION ■ This feature is not available for all models. ■ Image shown may differ from your TV . KENSINGT ON SECURITY SYSTEM 2 CAREFUL INST ALLA TION ADVICE ■ Y ou should purchase necessary components to fix the TV safety and secure to the wall on the market.
A-1 1 PREP ARA TION ■ The TV can be installed in various ways such as on a wall, or on a desktop etc. ■ The TV is designed to be mounted horizontally . Power Supply Circuit breaker EARTHING Ensure that you connect the earth wire to prevent possible electric shock.
A-12 PREP ARA TION PREP ARA TION REMOTE CONTROL KEY FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV . ( POWER) ENERGY SA VING A V MODE INPUT TV/RAD Switches the TV on from standby or of f to standby . Adjust the Energy Saving mode of the TV .
A-13 PREP ARA TION VOLUME UP /DOWN FAV MARK RA TIO MUTE Programme UP/DOWN P AGE UP/ DOWN Adjusts the volume. Displays the selected favourite programme. Select the input to apply the Picture Wizard settings. Check and un-check programmes in the USB menu.
A-14 PREP ARA TION PREP ARA TION ACCESSORIES LCD TV MODELS : 32/37/42/47LD4 *** , 26/32LD32 ** , 26/32LD33 ** Ensure that the following accessories are included with your TV . If an accessory is missing, please contact the dealer where you purchased the TV .
A-15 PREP ARA TION FRONT P ANEL CONTROLS ■ Image shown may differ from your TV . NOTE ► TV can be placed in standby mode in order to reduce the power consumption. And TV should be switched off using the power switch on the TV if it will not be watched for some time, as this will reduce energy consumption.
A-16 PREP ARA TION PREP ARA TION Only 32/37/42/47LD42 ** , 26/32LD32 ** , 26/32LD33 ** Remote Control Sensor Power/Standby Indicator Illuminates red in standby mode.
A-17 PREP ARA TION BACK P ANEL INFORMA TION ■ Image shown may differ from your TV . Power Cord Socket This TV operates on an AC power . The volt- age is indicated on the Specifications page. ( ► p.137 to 147) Never attempt to operate the TV on DC power .
A-18 PREP ARA TION PREP ARA TION ST AND INST ALLA TION ■ Image shown may differ from your TV When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully , the product can tilt forward after the product installation.
A-19 PREP ARA TION BACK COVER FOR WIRE ARRANGEMENT ■ Image shown may differ from your TV . NOTE ► Do not use the Cable Management Clip to lift the TV . - If the TV is dropped, you may be injured or the TV may be damaged. Connect the cables as necessary .
A-20 PREP ARA TION PREP ARA TION ■ This feature is not available for all models. ■ Image shown may differ from your TV . KENSINGT ON SECURITY SYSTEM 2 CAREFUL INST ALLA TION ADVICE ■ Y ou should purchase necessary components to fix the TV safety and secure to the wall on the market.
A-21 PREP ARA TION ■ The TV can be installed in various ways such as on a wall, or on a desktop etc. ■ The TV is designed to be mounted horizontally . Power Supply Circuit breaker EARTHING Ensure that you connect the earth wire to prevent possible electric shock.
A-22 PREP ARA TION PREP ARA TION REMOTE CONTROL KEY FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV . ( POWER) ENERGY SA VING A V MODE INPUT TV/RAD Switches the TV on from standby or of f to standby . Adjust the Energy Saving mode of the TV .
A-23 PREP ARA TION VOLUME UP /DOWN FAV MARK RA TIO MUTE Programme UP/DOWN P AGE UP/ DOWN Adjusts the volume. Displays the selected favourite programme. Select the input to apply the Picture Wizard settings. Check and un-check programmes in the USB menu.
A-24 PREP ARA TION PREP ARA TION Use of ferrite core (This feature is not available for all models.) Ferrite core can be used to reduce the electromagnetic wave when connecting the power cord. The closer the location of the ferrite core to the power plug, the better it is.
A-25 PREP ARA TION FRONT P ANEL CONTROLS NOTE ► TV can be placed in standby mode in order to reduce the power consumption. And TV should be switched off using the power switch on the TV if it will not be watched for some time, as this will reduce energy consumption.
A-26 PREP ARA TION PREP ARA TION BACK P ANEL INFORMA TION ■ Image shown may differ from your TV . Power Cord Socket This TV operates on an AC power . The volt- age is indicated on the Specifications page. ( ► p.137 to 147) Never attempt to operate the TV on DC power .
A-27 PREP ARA TION ST AND INST ALLA TION Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. Assemble the TV as shown. Fix the 4 bolts securely using the holes in the back of the TV . ■ Image shown may differ from your TV .
A-28 PREP ARA TION PREP ARA TION SWIVEL ST AND ■ Image shown may differ from your TV . After installing the TV , you can adjust the TV set manually to the left or right direction by 20 degrees to suit your viewing position. ■ Image shown may differ from your TV .
A-29 PREP ARA TION ■ This feature is not available for all models. ■ Image shown may differ from your TV . KENSINGT ON SECURITY SYSTEM 2 CAREFUL INST ALLA TION ADVICE ■ Y ou should purchase necessary components to fix the TV safety and secure to the wall on the market.
A-30 PREP ARA TION PREP ARA TION ■ The TV can be installed in various ways such as on a wall, or on a desktop etc. ■ The TV is designed to be mounted horizontally . Power Supply Circuit breaker EARTHING Ensure that you connect the earth wire to prevent possible electric shock.
A-31 PREP ARA TION REMOTE CONTROL KEY FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV . ( POWER) ENERGY SA VING A V MODE INPUT TV/RAD Switches the TV on from standby or of f to standby . Adjust the Energy Saving mode of the TV .
A-32 PREP ARA TION PREP ARA TION VOLUME UP /DOWN FAV MARK RA TIO MUTE Programme UP/DOWN P AGE UP/ DOWN Adjusts the volume. Displays the selected favourite programme. Select the input to apply the Picture Wizard settings. Check and un-check programmes in the USB menu.
A-33 PREP ARA TION ACCESSORIES LED LCD TV MODELS : 19/22/26/32LE3 *** , 32/37/42LE4 *** , 22/26LE5 *** , 32/37/42/47/55LE5 *** Ensure that the following accessories are included with your TV . If an accessory is missing, please contact the dealer where you purchased the TV .
A-34 PREP ARA TION PREP ARA TION FRONT P ANEL CONTROLS NOTE ► TV can be placed in standby mode in order to reduce the power consumption. And TV should be switched off using the power switch on the TV if it will not be watched for some time, as this will reduce energy consumption.
A-35 PREP ARA TION BACK P ANEL INFORMA TION ■ Image shown may differ from your TV . DC ADAPTER PORT Connect to the power cord socket. OPTICAL DIGIT AL AUDIO OUT Connect digital audio to various types of equipment. Connect to a Digital Audio Component.
A-36 PREP ARA TION PREP ARA TION Only 26LE3 *** , 26LE5 *** ■ Image shown may differ from your TV . DC ADAPTER PORT Connect to the power cord socket. OPTICAL DIGIT AL AUDIO OUT Connect digital audio to various types of equipment. Connect to a Digital Audio Component.
A-37 PREP ARA TION Only 32LE3 *** , 32/37/42LE4 *** , 32/37/42/47/55LE5 *** ■ Image shown may differ from your TV . 2 3 4 5 7 8 11 9 10 1 Power Cord Socket This TV operates on an AC power . The volt- age is indicated on the Specifications page. ( ► p.
A-38 PREP ARA TION PREP ARA TION Only 26/32LE3 *** , 32/42/47LE4 *** , 26LE5 *** , 32/37/42/47/55LE5 *** Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. 1 Assemble the TV as shown. 3 Assemble the parts of the Stand Body with the Stand Base of the TV .
A-39 PREP ARA TION BACK COVER FOR WIRE ARRANGEMENT ■ Image shown may differ from your TV . After connecting the cables as necessary , install Cable Holder as shown and bundle the cables. Cable Holder Only 19/22/26LE3 *** , 22/26LE5 *** 1 After connecting the cables as necessary , install Cable Holder as shown and bundle the cables.
A-40 PREP ARA TION PREP ARA TION A TT ACHING THE TV T O A DESK (Only 32LE3 *** , 32LE4 *** , 32LE5 *** ) Desk Stand ■ Ima4e shown may differ from your TV . The TV must be attached to desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product.
A-41 PREP ARA TION ■ This feature is not available for all models. ■ Image shown may differ from your TV . KENSINGT ON SECURITY SYSTEM 2 CAREFUL INST ALLA TION ADVICE ■ Y ou should purchase necessary components to fix the TV safety and secure to the wall on the market.
A-42 PREP ARA TION PREP ARA TION ■ The TV can be installed in various ways such as on a wall, or on a desktop etc. ■ The TV is designed to be mounted horizontally . Power Supply Circuit breaker EARTHING Ensure that you connect the earth wire to prevent possible electric shock.
A-43 PREP ARA TION REMOTE CONTROL KEY FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV . ■ Image shown may differ from your TV . ( POWER) ENERGY SA VING A V MODE INPUT TV/RAD Switches the TV on from standby or of f to standby .
A-44 PREP ARA TION PREP ARA TION VOLUME UP /DOWN FAV MARK RA TIO MUTE Programme UP/DOWN P AGE UP/ DOWN Adjusts the volume. Displays the selected favourite programme. Select the input to apply the Picture Wizard settings. Check and un-check programmes in the USB menu.
1 EXTERNAL EQUIPMENT SETUP EXTERNAL EQUIPMENT SETUP ANTENNA CONNECTION ■ For optimum picture quality , adjust antenna direction. ■ An antenna cable and converter are not supplied. ■ T o prevent damage do not connect to the mains outlet until all connections are made between the devices.
2 EXTERNAL EQUIPMENT SETUP EXTERNAL EQUIPMENT SETUP CONNECTING WITH A COMPONENT CABLE ■ T o avoid damaging any equipment, never plug in any power cord until you have finished connecting all equipment. ■ This section on EXTERNAL EQUIPMENT SETUP mainly uses diagrams for the 32/37/42/47LD4 *** models.
3 EXTERNAL EQUIPMENT SETUP CONNECTING WITH AN HDMI CABLE NOTE ► The TV can receive video and audio signals simultaneously when using an HDMI cable. ► If the DVD does not support Auto HDMI, you must set the output reso- lution appropriately . ► Check that your HDMI cable is High Speed HDMI Cable.
4 EXTERNAL EQUIPMENT SETUP EXTERNAL EQUIPMENT SETUP CONNECTING WITH AN HDMI TO DVI CABLE 1 Connect the digital set-top box or the DVI out- put of the PC to HDMI/DVI IN 1 jack on the TV . 2 Connect the audio output of the digital set-top box or the PC audio output to the AUDIO IN (RGB/DVI) jack on the TV .
5 EXTERNAL EQUIPMENT SETUP CONNECTING WITH A EURO SCART CABLE Scart Input Output Video Audio RGB Video, Audio AV 1 OOO Analogue TV , Digital TV Output T ype Current input mode l AV 1 (TV Out) AV 1 (When DTV scheduled recording is in progress using recording equipment.
6 EXTERNAL EQUIPMENT SETUP EXTERNAL EQUIPMENT SETUP USB SETUP 1 Connect the USB device to the USB IN jack on the TV . 2 After connecting the USB IN jack, you use the USB function. ( ► p.5 2 ) CONNECTING WITH A RF CABLE T o avoid picture noise (interference), allow adequate distance between the VCR and TV .
7 EXTERNAL EQUIPMENT SETUP CONNECTING WITH A RCA CABLE NOTE ► If you have a mono VCR, connect the audio cable from the VCR to the AUDIO L/MONO jack of the TV .
8 EXTERNAL EQUIPMENT SETUP EXTERNAL EQUIPMENT SETUP CONNECTING WITH A D-SUB 15 PIN CABLE This TV provides Plug and Play capability , meaning that the PC adjusts automatically to the TV's set- tings. 1 Connect the RGB output of the PC to the RGB IN (PC) jack on the TV .
9 EXTERNAL EQUIPMENT SETUP HEADPHONE SETUP Y ou can listen the sound through the headphone. NOTE ► AUDIO menu items are disabled when connecting a headphone. ► When changing A V MODE with a headphone connected, the change is applied to video but not to audio.
10 EXTERNAL EQUIPMENT SETUP EXTERNAL EQUIPMENT SETUP DIGIT AL AUDIO OUT SETUP Sending the TV’ s audio signal to external audio equipment via the Digital Audio Output (Optical) port. If you want to enjoy digital broadcasting through 5.1-channel speakers, connect the OPTICAL DIGIT AL AUDIO OUT terminal on the back of TV to a Home Theater (or amp).
11 EXTERNAL EQUIPMENT SETUP 1 Connect the Wireless Media Box to the WIRELESS CONTROL jack and HDMI/DVI IN 1 , HDMI IN 2 (Except for 19/22LD3 *** ), HDMI IN 3 (Except for 19/22/26/32LD3 *** , 32/37/42/47LD4 *** , 19/22LE3 *** , 22LE5 *** ) or HDMI IN 4 (Only 32LE3 *** , 32/37/42LE4 *** , 32/37/42/47/55LE5 *** ) jack on the TV .
12 EXTERNAL EQUIPMENT SETUP EXTERNAL EQUIPMENT SETUP RGB-PC, HDMI/DVI-PC mode HDMI/DVI-DTV mode SUPPORTED DISPLA Y RESOLUTION Resolution Horizontal Frequency(kHz) V ertical Frequency(Hz) 720x400 31.468 70.08 640x480 31.469 59.94 800x600 37.879 60.31 1024x768 48.
13 EXTERNAL EQUIPMENT SETUP SCREEN SETUP FOR PC MODE Returns Position, Size and Phase to the factory default settings. This function works in the following mode : RGB[PC]. Screen Reset • Press the MENU/EXIT button to return to normal TV viewing. • Press the BACK button to move to the previous menu screen.
14 EXTERNAL EQUIPMENT SETUP EXTERNAL EQUIPMENT SETUP Automatically adjusts the picture position and minimizes image instability . After adjustment, if the image is still not correct, your TV is functioning properly but needs further adjustment.
15 EXTERNAL EQUIPMENT SETUP T o view a normal picture, match the resolution of RGB mode and selection of PC mode. This function works in the following mode: RGB[PC] Selecting Resolution • Press the MENU/EXIT button to return to normal TV viewing. • Press the BACK button to move to the previous menu screen.
16 EXTERNAL EQUIPMENT SETUP EXTERNAL EQUIPMENT SETUP If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust the picture position manually .
17 W A TCHING TV / PROGRAMME CONTROL W A TCHING TV / PROGRAMME CONTROL TURNING ON THE TV INITIALIZING SETUP When your TV is turned on, you will be able to use its features.
18 W A TCHING TV / PROGRAMME CONTROL W A TCHING TV / PROGRAMME CONTROL Aspect Ratio : Selects your desired picture for- mat. For Zoom Setting, select 14:9, Zoom and Cinema Zoom in Ratio Menu. After complet- ing Zoom Setting, the display goes back to Q.
19 W A TCHING TV / PROGRAMME CONTROL ON SCREEN MENUS SELECTION AND ADJUSTMENT Y our TV's OSD (On Screen Display) may dif fer slightly from that shown in this manual. OK Move ● Auto Tuning ● Manual Tuning ● Programme Edit ● CI Information SETUP • Press the RED button, you can check the Customer Support menu.
20 W A TCHING TV / PROGRAMME CONTROL W A TCHING TV / PROGRAMME CONTROL AUT O PROGRAMME TUNING Use this to automatically find and store all available programmes. When you start auto programming, all previously stored service information will be deleted.
21 W A TCHING TV / PROGRAMME CONTROL If you want to select the Cable , • Press the MENU/EXIT button to return to normal TV viewing. • Press the BACK button to move to the previous menu screen. 1 Select SETUP . 2 Select Auto T uning . 3 Select Cable .
22 W A TCHING TV / PROGRAMME CONTROL W A TCHING TV / PROGRAMME CONTROL ■ When you select the Quick, Start Frequency(kHz) : 1 14000 Quick End Frequency(kHz) : 862000 Network : Auto OK Close Setting S.
23 W A TCHING TV / PROGRAMME CONTROL ■ When you select the Full, Search every available signal. Full OK Close • If you wish to keep on auto tuning, select Start using the button. Then, press the OK button. Otherwise select Close . • Automatic Numbering : Decide whether to use the programme numbers as sent by broadcasting stations for tuning.
24 W A TCHING TV / PROGRAMME CONTROL W A TCHING TV / PROGRAMME CONTROL The following values are needed in order to search all available programmes quickly and correctly . The commonly used values are provided as "default". However , for correct settings, please inquire of the cable service provider .
25 W A TCHING TV / PROGRAMME CONTROL CABLE DTV SETTING (IN CABLE MODE ONL Y) The range that a user can select from the Service Operator menu differs depending on number of Service Operator supported by each country , and if number of supported Service Operator for each country is 1, corresponding function becomes non-activation.
26 W A TCHING TV / PROGRAMME CONTROL W A TCHING TV / PROGRAMME CONTROL OK Move ● Auto Tuning ● Manual Tuning ● Programme Edit ● CI Information SETUP ● Manual Tuning MANUAL PROGRAMME TUNING Manual T uning lets you manually add a programme to your programme list.
27 W A TCHING TV / PROGRAMME CONTROL OK Move ● Auto Tuning ● Manual Tuning ● Programme Edit ● CI Information ● Cable DTV Setting SETUP ● Manual Tuning • Press the MENU/EXIT button to return to normal TV viewing. • Press the BACK button to move to the previous menu screen.
28 W A TCHING TV / PROGRAMME CONTROL W A TCHING TV / PROGRAMME CONTROL MANUAL PROGRAMME TUNING (IN ANALOGUE MODE) Manual T uning lets you manually tune and arrange the stations in whatever order you desire. • Press the MENU/EXIT button to return to normal TV viewing.
29 W A TCHING TV / PROGRAMME CONTROL Y ou can assign a station name with five characters to each programme number . ■ Assigning a station name • Press the MENU/EXIT button to return to normal TV viewing. • Press the BACK button to move to the previous menu screen.
30 W A TCHING TV / PROGRAMME CONTROL W A TCHING TV / PROGRAMME CONTROL PROGRAMME EDIT When a programme number is skipped, it means that you will be unable to select it using P button during TV viewing. If you wish to select the skipped programme, directly enter the programme number with the NUMBER buttons or select it in the Programme edit menu.
31 W A TCHING TV / PROGRAMME CONTROL This function enables you to delete or skip the stored programmes. Y ou can also move some channels and use other programme numbers.
32 W A TCHING TV / PROGRAMME CONTROL W A TCHING TV / PROGRAMME CONTROL ■ Auto Sort • After activating Auto Sort once, you can no longer edit programmes. 1 Start Auto Sort. ■ Skipping a programme number • When a programme number is skipped it means that you will be unable to select it using the P button during normal TV viewing.
33 W A TCHING TV / PROGRAMME CONTROL ■ Selecting favourite programme group 1 Select your desired programme. 2 Display a pop-up window where Favourite group can be changed.
34 W A TCHING TV / PROGRAMME CONTROL W A TCHING TV / PROGRAMME CONTROL CI [COMMON INTERF ACE] INFORMA TION This function enables you to watch some encrypted services (pay services). If you remove the CI Module, you cannot watch pay services. When the module is inserted into the CI slot, you can access the module menu.
35 W A TCHING TV / PROGRAMME CONTROL Software Update Close ● Current V ersion 00.00.01 ◄ On ► SOFTW ARE UPDA TE Software Update means software can be downloaded through the digital terrestrial broadcasting system. Press OK( ) to set programme settings.
36 W A TCHING TV / PROGRAMME CONTROL W A TCHING TV / PROGRAMME CONTROL ■ When setting “Software Update” Occasionally , a transmission of updated digital software infor- mation will result in the following menu on the TV screen.
37 W A TCHING TV / PROGRAMME CONTROL PICTURE/SOUND TEST This function is a customer support function that can execute picture and sound tests. Press OK( ) to set programme settings. Software Update Picture T est Sound T est Signal T est Product/Service Info.
38 W A TCHING TV / PROGRAMME CONTROL W A TCHING TV / PROGRAMME CONTROL DIAGNOSTICS This function enables you to view information on the Manufacturer , Model/T ype, Serial Number and Software V ersion. This displays the information and signal strength of the tuned *MUX.
39 W A TCHING TV / PROGRAMME CONTROL PRODUCT/SER VICE INFORMA TION This function is a customer support function that can see product/service information and customer service center information. Press OK( ) to set programme settings. Software Update Picture T est Sound T est Signal T est Product/Service Info.
40 W A TCHING TV / PROGRAMME CONTROL W A TCHING TV / PROGRAMME CONTROL SIMPLE MANUAL Y ou can easily and effectively access the TV information by viewing a simple manual on the TV . During the Simple Manual operation, audio will be muted. • Press the EXIT button to return to normal TV viewing.
41 W A TCHING TV / PROGRAMME CONTROL SELECTING THE PROGRAMME LIST Y ou can check which programmes are stored in the memory by displaying the programme list. Displayed when the Locked Programme. Mini Glossary ■ Displaying programme LIST ■ Selecting a programme in the programme list • Y ou may find some blue programmes.
42 W A TCHING TV / PROGRAMME CONTROL W A TCHING TV / PROGRAMME CONTROL ■ Displaying the favourite programme list ■ Paging through a programme list 1 T urn the pages. 2 Return to normal TV viewing. 1 Display the Favourite Programme List. Favourite List 1 BBC 2 BBC 3 BBC Group B ◄► ◄ ► Favourite Pr.
43 W A TCHING TV / PROGRAMME CONTROL • Antenna or Cable : Select it when watch- ing the DTV/RADIO/TV . • USB : Select it when using USB depends on connector . • AV : Select it when watching the VCR or external equipment. • Component : Select it when using the DVD or the Digital set-top box depends on connector .
44 W A TCHING TV / PROGRAMME CONTROL W A TCHING TV / PROGRAMME CONTROL INPUT LABEL Selects a label for each input source. • Press the MENU/EXIT button to return to normal TV viewing. • Press the BACK button to move to the previous menu screen. 1 Select Input Label .
45 W A TCHING TV / PROGRAMME CONTROL OK Move ● Language(Language) ● Country : Ireland ● Disability Assistance ● Power Indicator ● Data Service : MHEG ● Factory Reset ● Set ID : 1 ● ●.
46 W A TCHING TV / PROGRAMME CONTROL W A TCHING TV / PROGRAMME CONTROL SIMPLINK This function operates only with devices with the SIMPLINK logo. Please check the SIMPLINK logo. This TV might not function properly when using it with other products with HDMI-CEC function.
47 W A TCHING TV / PROGRAMME CONTROL Connecting to Home Theater with the SIMPLINK logo. NOTE ► Connect the HDMI/DVI IN or HDMI IN terminal of the TV to the terminal (HDMI terminal) of the SIMPLINK device with the HDMI cable.
48 W A TCHING TV / PROGRAMME CONTROL W A TCHING TV / PROGRAMME CONTROL Disc playback Control connected A V devices by pressing the , OK, ► , ▀ , l l , ◄◄ and ►► buttons. Direct Play After connecting A V devices to the TV , you can directly control the devices and play media without additional set- tings.
49 W A TCHING TV / PROGRAMME CONTROL SIMPLINK Menu Press the button and then OK button to select the desired SIMPLINK source. TV viewing : Switch to the previous TV pro- gramme regardless of the current mode. DISC playback : Select and play connected discs.
50 W A TCHING TV / PROGRAMME CONTROL W A TCHING TV / PROGRAMME CONTROL Off Cinema Game Sport A V MODE Y ou can select the optimal images and sounds when connecting A V devices to external input. Off Disables the A V MODE. Cinema Optimizes video and audio for watching movies.
51 W A TCHING TV / PROGRAMME CONTROL OK Move ● Language(Language) ● Country : UK ● Disability Assistance ● Power Indicator ● Factory Reset ● Set ID : 1 ● Mode Setting : Home Use OPTION ● Factory Reset INITIALIZING(RESET T O ORIGINAL F ACT OR Y SETTINGS) This function initializes all settings.
52 T O USE A USB DEVICE TO USE A USB DEVICE WHEN CONNECTING A USB DEVICE When you connect a USB device, this pop up menu is displayed, automatically . “POP UP MENU” will not be displayed while the OSD including Menu, EPG or Schedule list is activat- ed.
53 TO USE A USB DEVICE Precautions when using the USB device ► Only a USB storage device is recognizable. ► If the USB storage device is connected through a USB hub, the device is not recognizable. ► A USB storage device using an automatic recognition programme may not be recognized.
54 T O USE A USB DEVICE TO USE A USB DEVICE MOVIE LIST (Only 19/22/26/32LE3***, 32/37/42LE4***, 22/26LE5***, 32/37/42/47/55LE5***, 32/42/46/52/60LD56**, 32/37/42/47LD46**, 32/42/46/52/60LD555, 32/3742.
55 TO USE A USB DEVICE File Extension name Video Decoder Audio Codec Max Resolution mpg, mpeg MPEG1, MPEG2 MP2,MP3,Dolby Digital,LPCM 1920x1080@30p (only , Motion JPEG 640x480@30p) dat MPEG1 MP2 ts,trp,tp MPEG2, H.264, A VS, VC1 MP2,MP3,Dolby Digital, AAC, HE-AAC vob MPEG1, 2 MP2,MP3,Dolby Digital,LPCM mp4, mov MPEG4,DivX 3.
56 T O USE A USB DEVICE TO USE A USB DEVICE Screen Components Moves to upper level folder Current page/T otal pages Corresponding buttons on the remote control Contents under the folder focused on 1 Current page/ total pages of contents under the folder focused on 1 1 3 4 5 2 Select MY MEDIA .
57 TO USE A USB DEVICE Movie Selection ■ When playing movie files • Use the P button to navigation in the movie page. 1 Select the target folder or drive. 2 Select the desired movie title. 3 Movie files are played. GREEN Repeatedly , press the GREEN button to converted to Photo List->Music List .
58 T O USE A USB DEVICE TO USE A USB DEVICE NOTE ► In the case of files not supported, a message regarding non-supported file is displayed. ■ When selected movie files are played 1 Select the target folder or drive. 2 Select the desired movie title.
59 TO USE A USB DEVICE RED Play the selected movie file. Once a movie file finishes playing, the next selected one will be played automatically . GREEN Mark all movie files on the screen. YELLOW Deselect all marked movie files. BLUE Exit the Mark Mode .
60 T O USE A USB DEVICE TO USE A USB DEVICE Option Hide Q.MENU ► 01:02:30 / 02:30:25 ◄► ■ ► II ◄◄ ►► Choose options. Set Video Play . Set Video. Set Audio. Close Using the Movie List function, play NOTE ► Option values changed in Movie List does not affect Photo List and Music List .
61 TO USE A USB DEVICE ■ Stop the playing movie file. ► Press the PLA Y ( ► ) button to return to normal playback. II During playback, press the Pause ( II ) button. ■ Still screen is displayed. ■ If no buttons are pressed on the remote control for 10 minutes after pausing, the TV returns to the playback state.
62 T O USE A USB DEVICE TO USE A USB DEVICE ► Picture Size : Selects your desired picture format during movie play . ► Audio Language : Changes the Language Group of the audio during movie play . Files with a single audio track cannot be selected.
63 TO USE A USB DEVICE ■ When you select the Set Video, Set Video. Picture Mode ● Dynamic Contrast Previous ● Backlight 70 ● Brightness 50 ● Colour 60 ● Contrast 100 ◄► ◄► Standard.
64 T O USE A USB DEVICE TO USE A USB DEVICE ■ When you select the Set Audio, Set Audio. Standard Sound Mode ◄ ► Off Auto V olume ◄ ► Off Clear V oice II Balance 0 ◄ ► Previous LR ◄► Select Sound Mode, Auto V olume, Clear V oice II or Balance.
65 TO USE A USB DEVICE Screen Components Y ou can view photo files on USB storage device. The On Screen Display may be different from your TV . Images are an example to assist with the TV operation. When you are watching the photo by the Photo List function, you can not change the picture mode.
66 T O USE A USB DEVICE TO USE A USB DEVICE GREEN Repeatedly , press the GREEN button to converted to Music List->Movie List . YELLOW A method to view in 5 large thumbnail or simple list.
67 TO USE A USB DEVICE ■ When selected photo files are displayed 1 Select the target folder or drive. 2 Select the desired photos. 3 or BLUE Convert to Mark Mode . 4 Mark desired photo file. 5 Marked photo file is displayed. • When one or more photos are marked, you can view each marked photo or a slide show of the marked photos.
68 T O USE A USB DEVICE TO USE A USB DEVICE RED Display the selected photo file. GREEN Mark all photo files on the screen. YELLOW Deselect all marked photo files. BLUE Exit the Mark Mode . Return to normal TV viewing. Using the remote control Downloaded From TV-Manual.
69 TO USE A USB DEVICE How to view photo 2/13 ◄ ► ◄► Detailed operations are available on full-sized photo view screen. • Use the P button to navigation in the photo page. 1 Select the target folder or drive. 2 Select the desired photos. 3 The selected photo is displayed in full size.
70 T O USE A USB DEVICE TO USE A USB DEVICE ► Slideshow : When no picture is selected, all photos in the cur- rent folder are displayed during slide show . If some photos are selected, those photos are displayed in a slide show . ■ Set the time interval of the slide show in Option .
71 TO USE A USB DEVICE 2/13 ◄ ► ◄► Choose options. Set Photo View . Set Video. Set Audio. Close Using the Photo List function NOTE ► Option values changed in Movie List does not affect Photo List and Music List . ► Option value changed in Photo List and Music List are changed likewise in Photo List and Music List excluding Movie List .
72 T O USE A USB DEVICE TO USE A USB DEVICE ■ When you select the Set Photo View , Drive1 Previous Set Photo View . BGM Fast Slide Speed ◄ ► On ● Repeat ◄ ► Off ● Random ◄ ► Select Slide Speed or BGM. 2 Make appropriate adjustments. 1 Downloaded From TV-Manual.
73 TO USE A USB DEVICE ■ When you select the Set Video, Set Video. Picture Mode ● Dynamic Contrast Previous ● Backlight 70 ● Brightness 50 ● Colour 60 ● Contrast 100 ◄► ◄► Standard.
74 T O USE A USB DEVICE TO USE A USB DEVICE ■ When you select the Set Audio, Set Audio. Standard Sound Mode ◄ ► Off Auto V olume ◄ ► Off Clear V oice II Balance 0 ◄ ► Previous LR ◄► Select Sound Mode, Auto V olume, Clear V oice II or Balance.
75 TO USE A USB DEVICE MUSIC LIST Y ou can play music files on USB storage device. Purchased music files(*.MP3) may contain copyright restrictions. Playback of these files may not be supported by this model. Music file on your USB device can be played by this unit.
76 T O USE A USB DEVICE TO USE A USB DEVICE Music Selection ■ When playing music files 1 Select the target folder or drive. 2 Select the desired music title. 3 Music files are played. • Use the P button to navigate up/down in the music page. Page 1/1 Music List Drive1 Page 1/1 001.
77 TO USE A USB DEVICE ■ When selected music files are played 1 Select the target folder or drive. 2 Select the desired music title. 3 or BLUE Convert to Mark Mode . 4 Mark desired music file. 5 Marked music file is played. Page 1/1 Music List Drive1 Page 1/1 001.
78 T O USE A USB DEVICE TO USE A USB DEVICE RED Display the selected music file. GREEN Mark all music files on the screen. YELLOW Deselect all marked music files. BLUE Exit the Mark Mode . Return to normal TV viewing. Using the remote control Downloaded From TV-Manual.
79 TO USE A USB DEVICE Choose options. Set Audio Play . Set Audio. Close Page 1/1 Music List Drive1 Page 1/1 3 file(s) Marked 004. - B04.mp3 00:00 005. - B05.mp3 00:00 006. - B06.mp3 00:00 007. - B07.mp3 00:00 008. - B08.mp3 00:00 Hide Exit Option Q.MENU Play with Photo 005.
80 T O USE A USB DEVICE TO USE A USB DEVICE Using the remote control ■ Stop the playing music file. ► Press the PLA Y ( ► ) button to return to normal playback. II When you press the Pause ( II ) button while playing the file, the playback will be paused.
81 TO USE A USB DEVICE ■ When you select the Set Audio Play , Previous Set Audio Play . On Repeat ◄ ► Off Random ◄ ► Select Repeat or Random.
82 T O USE A USB DEVICE TO USE A USB DEVICE ■ When you select the Set Audio, Set Audio. Standard Sound Mode ◄ ► Off Auto V olume ◄ ► Off Clear V oice II Balance 0 ◄ ► Previous LR ◄► Select Sound Mode, Auto V olume, Clear V oice II or Balance.
83 TO USE A USB DEVICE NOTE ► A damaged or corrupted music does not play but displays 00:00 in playtime. ► A music downloaded from a paid service with copyright protection does not start but displays inappropriate information in playtime. ► If you press OK, ■ buttons, screen saver is stopped.
84 T O USE A USB DEVICE TO USE A USB DEVICE DIVX REGISTRA TION CODE (Only 19/22/26/32LE3***, 32/37/42LE4***, 22/26LE5***, 32/37/42/47/55LE5***, 32/42/46/52/60LD56**, 32/37/42/47LD46**, 32/42/46/52/60L.
85 TO USE A USB DEVICE DEACTIV A TION (Only 19/22/26/32LE3***, 32/37/42LE4***, 22/26LE5***, 32/37/42/47/55LE5***, 32/42/46/52/60LD56**, 32/37/42/47LD46**, 32/42/46/52/60LD555, 32/3742/47LD455, 19/22/2.
Shows current programme information Displayed with a TV or DTV Programme. Displayed with a T eletext Programme. Displayed with a Radio Programme. Displayed with a Subtitle Programme. Displayed with a MHEG Programme. Displayed with a Scramble Programme.
87 EPG (ELECTRONIC PROGRAMME GUIDE)(IN DIGIT AL MODE) Switch on/off EPG Select a programme 1 Switch on or off EPG. or 1 Select desired programme. Button Function in NOW/NEXT Guide Mode Y ou can view a program being broadcasted and one scheduled to follow .
88 EPG (ELECTRONIC PROGRAMME GUIDE) EPG (ELECTRONIC PROGRAMME GUIDE)(IN DIGIT AL MODE) Button Function in 8 Day Guide Mode RED Change EPG mode. GREEN Enter Date setting mode.
89 EPG (ELECTRONIC PROGRAMME GUIDE)(IN DIGIT AL MODE) Button Function in Date Change Mode Programme Guide 1 YLE TV1 2 YLE TV2 4 TV .. 5 YLE FST 6 CNN 8 YLE24 ▼ ▲ Kungskonsumente Mint Extra The Drum TV2: Farmen The Drum Y ou Call The Hits Fashion Essentials .
90 EPG (ELECTRONIC PROGRAMME GUIDE) EPG (ELECTRONIC PROGRAMME GUIDE)(IN DIGIT AL MODE) Button Function in Record/Remind Setting Mode Sets a start or end time for recording, and sets only a start time for the reminder with the end time grayed out.
91 EPG (ELECTRONIC PROGRAMME GUIDE)(IN DIGIT AL MODE) Button Function in Schedule List Mode If you’ve created a schedule list, a scheduled programme is displayed at the scheduled time even when you are watching a different programme at the time. Currently recording item cannot be edited or deleted.
92 PICTURE CONTROL PICTURE CONTROL • 16:9 The following selection will allow you to adjust the pic- ture horizontally , in linear proportion, to fill the entire screen(useful for viewing 4:3 formatted DVDs).
93 PICTURE CONTROL • 4:3 The following selection will allow you to view a picture with an original 4:3 aspect ratio. • 14:9 Y ou can view a picture format of 14:9 or a general TV programme in the 14:9 mode. The 14:9 screen is viewed in the same way as in 4:3, but is moved to the up and down.
94 PICTURE CONTROL PICTURE CONTROL PICTURE WIZARD This feature lets you adjust the picture quality of the original image. Use this to calibrate the screen quality by adjusting the Black and White Level etc. General users can calibrate the screen quality by easily following each stage.
95 PICTURE CONTROL ENERGY SA VING It reduces the TV’ s power consumption. The default factory setting is adjusted to the comfortable level to be viewed at home. Y ou can increase the brightness of your screen by adjusting the Energy Saving level or by setting the Picture Mode .
96 PICTURE CONTROL PICTURE CONTROL PRESET PICTURE SETTINGS Picture Mode-Preset Vivid Strengthen the contrast, brightness, colour and sharpness for vivid picture. Standard The most general screen display status. Cinema Optimizes video for watching movies.
97 PICTURE CONTROL MANUAL PICTURE ADJUSTMENT Picture Mode-User option Backlight T o control the brightness of the screen, adjust the brightness of LCD panel. Adjusting the backlight when setting the brightness of the set is recommended. Contrast Adjusts the signal level between black and white in the picture.
98 PICTURE CONTROL PICTURE CONTROL OK Move PICTURE Sh Sh Sh •S h •S h •S h •S h Sh Sh arpn arpn arpn arpn arpn arpn arpn p p ess ess ess ess ess ess ess 0 70 70 70 70 70 70 70 70 • Colour 60 • Tint 0 • Colour T emp.
99 PICTURE CONTROL EXPERT PICTURE CONTROL By segmenting categories, Expert1 and Expert2 provide more categories which users can set as they see fit, offering the optimal picture quality for users. This may also be used to help a professional optimize the TV performance using specific videos.
100 PICTURE CONTROL PICTURE CONTROL *This feature is not available for all models. Dynamic Contrast (Off/Low/Medium/High) ■ Adjusts the contrast to keep it at the best level according to the brightness of the screen. The picture is improved by making bright parts brighter and dark parts darker .
101 PICTURE CONTROL Colour Gamut (Advanced Control: Wide/Standard) • Standard : Mode to use original colour area regardless of the display char- acteristics. • Wide: Mode to use maximum colour area of the TV display . ■ Maximize the utilization for colour area that can be expressed.
102 PICTURE CONTROL PICTURE CONTROL OK Move PICTURE Sh Sh •S h •S h Sh arpn arpn arpn arpn ap p ess ess ess ess 70 70 70 70 70 • Colour 60 • Tint 0 • Colour T emp. • Advanced Control • Picture Reset • TruMotion • Screen PICTURE RESET Settings of the selected picture modes return to the default factory settings.
103 PICTURE CONTROL TRUMOTION (Only 32/42/46/52/60LD5 *** , 32/37/42/47/55LE5 *** ) It is used for the best picture quality without any motion blur or judder when you enter a quick image or Film Source. High : Provide smoother picture movement. Low : Provide smooth picture movement.
104 PICTURE CONTROL PICTURE CONTROL POWER INDICA T OR Adjust the power/standby indicator light on the front of the TV . Standby Light Determines whether to set the indicator light on the front of the TV to On or Off in standby mode.
105 PICTURE CONTROL MODE SETTING We recommend setting the TV to “ Home Use ” mode for the best picture in your home environment. “ Store Demo ” mode is an optimal setting for displaying at stores. • Press the MENU/EXIT button to return to normal TV viewing.
106 PICTURE CONTROL PICTURE CONTROL DEMO MODE It is not possible to use Demo Mode in Home Use mode. In Store Demo , Demo Mode is automatically set to On . Once Demo Mode is set to Off in Store Demo , Demo Mode does not run and only the screen is reset.
107 SOUND & LANGUAGE CONTROL SOUND & LANGUAGE CONTROL AUT O VOLUME LEVELER Auto V olume automatically remains on the same level of volume if you change programmes. Because each broadcasting station has its own signal conditions, volume adjustment may be needed every time the channel is changed.
108 SOUND & LANGUAGE CONTROL SOUND & LANGUAGE CONTROL CLEAR VOICE II By differentiating the human sound range from others, it helps users listen to human voices better . Adjustment for Clear V oice Level With selecting On • Press the MENU/EXIT button to return to normal TV viewing.
109 SOUND & LANGUAGE CONTROL PRESET SOUND SETTINGS-SOUND MODE Y ou can select your preferred sound setting; Standard, Music, Cinema, Sport or Game and you can also adjust the T reble, Bass. Sound Mode lets you enjoy the best sound without any Special adjustment as the TV sets the appro- priate sound options based on the programme content.
11 0 SOUND & LANGUAGE CONTROL SOUND & LANGUAGE CONTROL SOUND SETTING ADJUSTMENT -USER MODE INFINITE SOUND Select this option to sound realistic. • Press the MENU/EXIT button to return to normal TV viewing. • Press the BACK button to move to the previous menu screen.
111 SOUND & LANGUAGE CONTROL BALANCE Y ou can adjust the sound balance of the speakers to preferred levels. • Press the MENU/EXIT button to return to normal TV viewing. • Press the BACK button to move to the previous menu screen. 1 Select AUDIO .
11 2 SOUND & LANGUAGE CONTROL SOUND & LANGUAGE CONTROL TV SPEAKERS ON/ OFF SETUP Y ou can adjust the TV internal speaker status. In AV , COMPONENT , RGB and HDMI1 with HDMI to DVI cable, the TV speaker can be operational even when there is no video signal.
11 3 SOUND & LANGUAGE CONTROL DTV AUDIO SETTING (IN DIGIT AL MODE ONL Y) When different audio types exist in an input signal, this function allows you to select the audio type you want. • Press the MENU/EXIT button to return to normal TV viewing.
11 4 SOUND & LANGUAGE CONTROL SOUND & LANGUAGE CONTROL SELECTING DIGIT AL AUDIO OUT This function allows you to select your preferred Digital Audio Output. When Dolby Digital is available, selecting Auto in the Digital Audio Out menu will set SPDIF(Sony Philips Digital InterFace) output to Dolby Digital.
11 5 SOUND & LANGUAGE CONTROL Settings of the selected Sound Mode return to the default factory settings. AUDIO RESET • Press the MENU/EXIT button to return to normal TV viewing.
11 6 SOUND & LANGUAGE CONTROL SOUND & LANGUAGE CONTROL AUDIO DESCRIPTION (IN DIGIT AL MODE ONL Y) This function is for the blind, and provides explanatory audio describing the current situation in a TV programme in addition to the basic audio.
11 7 SOUND & LANGUAGE CONTROL I/II ■ Mono sound selection If the stereo signal is weak in stereo reception, you can switch to mono. In mono reception, the clarity of sound is improved.
11 8 SOUND & LANGUAGE CONTROL SOUND & LANGUAGE CONTROL NICAM RECEPTION (IN ANALOGUE MODE ONL Y) If the TV is equipped with a receiver for NICAM reception, high quality NICAM (Near Instantaneous Companding Audio Multiplex) digital sound can be received.
11 9 SOUND & LANGUAGE CONTROL ON-SCREEN MENU LANGUAGE / COUNTR Y SELECTION The installation guide menu appears on the TV screen when it is switched on for the first time. * If you want to change Language/ Country selection • Press the MENU/EXIT button to return to normal TV viewing.
120 SOUND & LANGUAGE CONTROL SOUND & LANGUAGE CONTROL 120 The Audio function allows selection of a preferred language. If audio data in a selected language is not broadcast, the default language audio will be played. Use the Subtitle function when two or more subtitle languages are broadcast.
121 SOUND & LANGUAGE CONTROL < Audio Language Selection > ► When two or more audio languages are broadcast, you can select the audio language. - The audio/subtitles can be displayed in a simpler form with 1 to 3 characters broadcast by the service pro- vider .
122 CLOCK SETUP TIME SETTING The clock is set automatically when receiving a digital signal in Auto mode. Y ou can set the clock manually in Manual mode.
123 TIME SETTING AUT O ON/OFF TIME SETTING The Off time function automatically switches the TV to standby at a preset time. T wo hours after the TV is switched on by the on time function it will automatically switch back to stand- by mode unless a button has been pressed.
124 TIME SETTING TIME SETTING SLEEP TIMER SETTING Y ou do not have to remember to switch the TV of f before you go to sleep. The sleep timer automatically switches the TV to standby after the preset time has elapsed. • When you switch the TV off, the preset sleep timer is cancelled.
125 P ARENT AL CONTROL / RA TINGS P ARENT AL CONTROL / RA TINGS SET P ASSWORD & LOCK SYSTEM Enter the password, press ‘0’,‘0’,‘0’,‘0’ on the remote control handset. When France is selected for Country , password is not ‘0’,‘0’,‘0’,‘0’ but ‘1’,’2’,’3’,’4’.
126 P ARENT AL CONTROL / RA TINGS P ARENT AL CONTROL / RA TINGS BLOCK PROGRAMME Blocks any programme that you do not want to watch or that you do not want your children to watch. It is available to use this function in Lock System ” On ”. Enter a password to watch a blocked programme.
127 P ARENT AL CONTROL / RA TINGS P ARENT AL CONTROL (IN DIGIT AL MODE ONL Y) • Press the MENU/EXIT button to return to normal TV viewing. • Press the BACK button to move to the previous menu screen. 1 Select LOCK . 2 Select Lock System . 3 Select Parental Guidance .
128 P ARENT AL CONTROL / RA TINGS P ARENT AL CONTROL / RA TINGS EXTERNAL INPUT BLOCKING Enables you to block an input. It is available to use this function in Lock System ” On ” . • Press the MENU/EXIT button to return to normal TV viewing. • Press the BACK button to move to the previous menu screen.
129 P ARENT AL CONTROL / RA TINGS KEY LOCK This feature can be used to prevent unauthorized viewing by locking out the front panel controls, so that it can only be used with the remote control. This TV is programmed to remember which option it was last set to even if you turn the TV off.
130 TELETEXT TELETEXT This feature is not available in all countries. Press the TEXT button to switch to teletext. The initial page or last page viewed appears on the screen. T wo page numbers, TV station name, date and time are displayed on the screen headline.
131 TELETEXT T OP TEXT The user guide displays four fields-red, green, yellow and blue at the bottom of the screen. The yellow field denotes the next group and the blue field indicates the next block. ■ Block / group / page selection With the blue button you can progress from block to block.
132 TELETEXT TELETEXT SPECIAL TELETEXT FUNCTIONS ■ Index Select the each index page. ■ Time When viewing a TV programme, select this menu to display the time at the top right hand corner of the screen. In the teletext mode, press this button to select a sub page number .
133 DIGIT AL TELETEXT DIGIT AL TELETEXT *This function works in UK, Ireland only . The TV gives you access to digital teletext which is greatly improved in various aspects such as text, graphics etc. This digital teletext can access special digital teletext services and specific services which broadcast digital teletext.
134 APPENDIX APPENDIX TROUBLESHOOTING The TV does not operate properly . The remote control does not work ■ Check to see if there is any object between the TV and the remote con- trol causing an obstruction. Ensure you are pointing the remote control directly at the TV .
135 APPENDIX The audio function does not work. Picture OK & No sound ■ Press the + or - button. ■ Sound muted? Press MUTE button. ■ T ry another channel. The problem may be with the broadcast. ■ Are the audio cables installed properly? No output from one of the speakers ■ Adjust Balance in menu option.
136 APPENDIX APPENDIX MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can prolong the life of your new TV . Caution: Be sure to switch the power off and unplug the power cord before you begin any cleaning.
137 APPENDIX PRODUCT SPECIFICA TIONS ■ The specifications shown above may be changed without prior notice for quality improvement. MODELS 19LD35 ** / 19LD34 ** 22LD35 ** / 22LD34 ** 19LD350-ZA / 19L.
138 APPENDIX APPENDIX ■ The specifications shown above may be changed without prior notice for quality improvement. MODELS 32LD4 *** 32LD420-ZA / 32LD420N-ZA 32LD428-ZA / 32LD420C-ZA 32LD425-ZA 32LD.
139 APPENDIX ■ The specifications shown above may be changed without prior notice for quality improvement. MODELS 42LD4 *** 42LD420-ZA / 42LD420N-ZA 42LD428-ZA / 42LD420C-ZA 42LD425-ZA 42LD421-ZB / .
140 APPENDIX APPENDIX ■ The specifications shown above may be changed without prior notice for quality improvement. MODELS 32LD5 *** 32LD550-ZC / 32LD550N-ZC 32LD558-ZC / 32LD559-ZA 32LD565-ZC / 32LD565N-ZC 32LD551-ZA / 32LD551N-ZA 32LD566-ZA / 32LD568-ZC 32LD569-ZA / 32LD555-ZC Dimensions (Width x Height x Depth) with stand 800.
141 APPENDIX ■ The specifications shown above may be changed without prior notice for quality improvement. MODELS 46LD5 *** 46LD550-ZC / 46LD550N-ZC 46LD558-ZC / 46LD559-ZA 46LD565-ZC /46LD565N-ZC 46LD551-ZA / 46LD551N-ZA 46LD566-ZA / 46LD568-ZC 46LD569-ZA/ 46LD555-ZC Dimensions (Width x Height x Depth) with stand 1 1 15.
142 APPENDIX APPENDIX ■ The specifications shown above may be changed without prior notice for quality improvement. MODELS 60LD5 *** 60LD550-ZC / 60LD550N-ZC 60LD558-ZC / 60LD559-ZA 60LD565-ZC / 60LD565N-ZC 60LD551-ZA / 60LD551N-ZA 60LD566-ZA / 60LD568-ZC 60LD569-ZA / 60LD555-ZC Dimensions (Width x Height x Depth) with stand 1441.
143 APPENDIX MODELS 32LE4 *** 37LE4 *** 32LE4500-ZA / 32LE450N-ZA 32LE4508-ZA 37LE4500-ZA / 37LE450N-ZA 37LE4508-ZA Dimensions (Width x Height x Depth) with stand 786.0 mm x 559.0 mm x 221.0 mm 907.0 mm x 630.0 mm x 270.0 mm without stand 786.0 mm x 500.
144 APPENDIX APPENDIX MODELS 19LE3 *** 19LE3300-ZA / 19LE330N-ZA 19LE3308-ZA / 19LE3400-ZA 19LE340N-ZA / 19LE3408-ZA 19LE3310-ZB / 19LE331N-ZB 19LE3410-ZB / 19LE341N-ZB Dimensions (Width x Height x Depth) with stand 471.2 mm x 365.9 mm x 155.4 mm 471.
145 APPENDIX ■ The specifications shown above may be changed without prior notice for quality improvement. MODELS 26LE3 *** 26LE3300-ZA / 26LE330N-ZA 26LE3308-ZA 26LE3310-ZB / 26LE331N-ZB Dimensions (Width x Height x Depth) with stand 652.0 mm x 480.
146 APPENDIX APPENDIX MODELS 37LE5 *** 37LE5300-ZA / 37LE530N-ZA 37LE5308-ZA / 37LE530C-ZA 37LE5310-ZB / 37LE531N-ZB 37LE5318-ZB / 37LE531C-ZA Dimensions (Width x Height x Depth) with stand 905.0 mm x 630.0 mm x 270.0 mm 905.0 mm x 630.0 mm x 270.0 mm without stand 905.
147 APPENDIX MODELS 47LE5 *** 47LE5300-ZA / 47LE530N-ZA 47LE5308-ZA / 47LE530C-ZA 47LE5310-ZB / 47LE531N-ZB 47LE5318-ZB / 47LE531C-ZA Dimensions (Width x Height x Depth) with stand 1 126.6 mm x 757.9 mm x 284.4 mm 1 126.6 mm x 757.9 mm x 284.4 mm without stand 1 126.
148 APPENDIX APPENDIX IR CODES *This feature is not available for all models. Code (Hexa) Function Note 95 Energy Saving R/C BUTTON 08 POWER R/C BUTTON(POWER ON/OFF) 0B INPUT R/C BUTTON 79 RA TIO R/C BUTTON F0 TV/RAD R/C BUTTON 45 Q.
149 APPENDIX EXTERNAL CONTROL DEVICE SETUP RS-232C Setup Connect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/V control system) to control the product’s func- tions externally . Connect the serial port of the control device to the RS-232C jack on the product back panel.
150 APPENDIX APPENDIX ● Language(Language) ● Country : UK ● Disability Assistance ● Power Indicator ● Factory Reset ● Set ID : 1 ● Mode Setting : Home Use OK Move OPTION ● Set ID :1 Set ID Use this function to specify a set ID number .
151 APPENDIX Communication Parameters ■ Baud rate : 9600 bps ( UART ) ■ Data length : 8 bits ■ Parity : None ■ Stop bit : 1 bit ■ Communication code : ASCII code ■ Use a crossed (reverse) cable. T ransmission * [Command 1] : First command to control the TV .
152 APPENDIX APPENDIX 08. Colour (Command: k i) ► T o adjust the screen colour . Y ou can also adjust colour in the PICTURE menu. T ransmission Data Min : 00 t o Max : 64 * Refer to ‘Real data mapping 1’. See page 154. [k][i][ ][Set ID][ ][Data][Cr] Ack [i][ ][Set ID][ ][OK/NG][Data][x] 04.
153 APPENDIX 12. Remote control lock mode ( Command: k m) ► T o lock the front panel controls on the monitor and remote control. T ransmission [k][m][ ][Set ID][ ][Data][Cr] Ack Data 00 : Lock off 01 : Lock on * If you are not using the remote control, use this mode.
154 APPENDIX APPENDIX 19.T une Command (Command: m a) ► Select channel to following physical number . T ransmission Data00 : High channel data Data01 : Low channel data ex.
155 APPENDIX 23 . Input select ( Command: x b) (Main Picture Input) ► T o select input source for main picture. T ransmission Data Structure MSB LSB [x][b][ ][Set ID][ ][Data][Cr] External Input Input Number 22. Control Back Light (Command: m g) ► T o Control the back light.
156 APPENDIX APPENDIX OPEN SOURCE SOFTW ARE NOTICE The following GPL executables and LGPL, MPL libraries used in this product are subject to the GPL2.0/LGPL2.
157 APPENDIX ■ copyright © 1993, 1994, 1995, 1996 Rick Sladkey . ■ copyright © 1998-2003 Wichert Akkerman. ■ copyright © 2002-2008 Roland McGrath.
158 APPENDIX APPENDIX OPEN SOURCE LICENSE GNU GENERAL PUBLIC LICENSE V ersion 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor , Boston, MA 021 10-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
159 APPENDIX 1. Y ou may copy and distribute verbatim copies of the Program's source code as you receive it, in any medium, pro- vided that you conspicuously and appropriately publish on each cop.
160 APPENDIX APPENDIX If distribution of executable or object code is made by offering access to copy from a designated place, then of fering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code.
161 APPENDIX NO W ARRANTY 1 1. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, T O THE EXTENT PERMITTED BY APPLICABLE LAW .
162 APPENDIX APPENDIX GNU LESSER GENERAL PUBLIC LICENSE V ersion 2.1, February 1999 Copyright (C) 1991, 1999 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor , Boston, MA 021 10-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
163 APPENDIX Although the Lesser General Public License is Less protective of the users' freedom, it does ensure that the user of a program that is linked with the Library has the freedom and the wherewithal to run that program using a modified ver- sion of the Library .
164 APPENDIX APPENDIX Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather , the intent is to exercise the right to control the distribution of derivative or collective works based on the Library .
165 APPENDIX c) Accompany the work with a written offer , valid for at least three years, to give the same user the materials specified in Subsection 6a, above, for a charge no more than the cost of performing this distribution.
166 APPENDIX APPENDIX 13. The Free Software Foundation may publish revised and/or new versions of the Lesser General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new prob- lems or concerns.
167 APPENDIX MOZILLA PUBLIC LICENSE V ersion 1.1 --------------- 1. Definitions. 1.0.1. "Commercial Use" means distribution or otherwise making the Covered Code available to a third party . 1.1. "Contributor" means each entity that creates or contributes to the creation of Modifications.
168 APPENDIX APPENDIX (b) under Patents Claims infringed by the making, using or selling of Original Code, to make, have made, use, practice, sell, and offer for sale, and/or otherwise dispose of the Original Code (or portions thereof). (c) the licenses granted in this Section 2.
169 APPENDIX (b) Contributor APIs. If Contributor's Modifications include an application programming interface and Contributor has knowledge of patent licenses which are reasonably necessary to implement that API, Contributor must also include this infor- mation in the LEGAL file.
170 APPENDIX APPENDIX 6.3. Derivative Works. If Y ou create or use a modified version of this License (which you may only do in order to apply it to code which is not already Covered Code governed by .
10. U.S. GOVERNMENT END USERS. The Covered Code is a "commercial item," as that term is defined in 48 C.F .R. 2.101 (Oct. 1995), consisting of "commercial computer software" and "commercial computer software documentation," as such terms are used in 48 C.
R ecord the model number and serial number of the T V . R ef er to the label on the back cov er and quot e this inf ormation to your dealer when r equiring any ser vice. Model : Serial No. : T rade Mark of the DVB Digital Video Broadcas ting Project (1991 t o 1996) Downloaded From TV-Manual.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté LG Electronics 32/42/46/52/60LD5 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du LG Electronics 32/42/46/52/60LD5 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation LG Electronics 32/42/46/52/60LD5, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le LG Electronics 32/42/46/52/60LD5 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le LG Electronics 32/42/46/52/60LD5, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du LG Electronics 32/42/46/52/60LD5.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le LG Electronics 32/42/46/52/60LD5. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei LG Electronics 32/42/46/52/60LD5 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
