Manuel d'utilisation / d'entretien du produit WBR-3402TX du fabricant LevelOne
Aller à la page of 146
1 LevelOne WBR -3402TX 1W ,4L 11g Wireless ADSL R outer w/VPN/Printer Server(USB) User`s Manual.
2 T able of Contents Chapter 1 In troduction ..................................................................................................... 4 Functions and Features ...............................................................................
3 4.8.6 Miscellaneous Item s ....................................................................................... 75 Chapter 5 Print Server .................................................................................................... 76 5.1 Configuring on W indo ws 95/ 98 Platforms .
4 C C C h h h a a a p p p t t t e e e r r r 1 1 1 I I I n n n t t t r r r o o o d d d u u u c c c t t t i i i o o o n n n Congratulations on you r purchase of LevelOne WBR-3402 AD SL W ireless Broadband Router . This product is s pecifically designed f or Small Of fice and Hom e Office needs.
5 correctly . S tatistics of W AN Supported Enables you to m onitor inbound and outbound packets Wir eless functions High speed for wir eless LAN connection Up to 54Mbps data rate by incorporatin g Orthogonal Frequency Division Multiplexin g (OFDM).
6 When SPI Mode is enabled, the rou ter will check every incoming packet to detect if this packet is valid. DoS Attack Detection Supported When this feature is enabled , the router will detect and log t he DoS attack comes from the Internet.
7 C C C h h h a a a p p p t t t e e e r r r 2 2 2 H H H a a a r r r d d d w w w a a a r r r e e e I I I n n n s s s t t t a a a l l l l l l a a a t t t i i i o o o n n n 2.1 Panel Layout 2.1.1. Front Panel Figure 2-1 Front Panel LED: LED Function Color S tatus Description POWER Power indication Green On Power is being applied to this product.
8 2.1.2. Rear Panel Figure 2-2 Rear Panel Ports: Port Description 5VDC Power inlet: DC 5V , 2A ADSL the port where you will connect your phone jack.. Port 1-4 the ports where you will connect network ed computers and other devices. USB USB Ports for USB printer .
9 Figure 2-3 Setup of LAN and W AN connections for this product. 3. Setup ADSL connection Prepare a telephone cable for conn ecting this produc t to your ISP . Figure 2-3 illustrates the ADSL connection. 4. Connecting this product with your printer Use the printer cable to connect y our printer to the USB printer port of thi s product.
10 C C C h h h a a a p p p t t t e e e r r r 3 3 3 N N N e e e t t t w w w o o o r r r k k k S S S e e e t t t t t t i i i n n n g g g s s s a a a n n n d d d S S S o o o f f f t t t w w w a a a r r r.
11 3.2 Install the Softwar e into Y our Computers Skip this section if y ou do not want to use the print server function of thi s product. Notice : If you are using Wi ndows 2000/X P , please refer to Chapter 5 Printer - 5.3 Configuri ng on W indows 2000 and XP Platforms.
12 Step 3: Select the destina tion folder and click on the Ne xt button. Then , the setup program will begin to install the programs into th e destination folder .Step 4: When the following window is displayed, cli ck on the Finish button. Select the item to restart the computer and then click th e OK button to reboot your computer .
13 C C C h h h a a a p p p t t t e e e r r r 4 4 4 C C C o o o n n n f f f i i i g g g u u u r r r i i i n n n g g g A A A D D D S S S L L L W W W i i i r r r e e e l l l e e e s s s s s s B B B r r r.
14 4.1 S tart-up and Log in Activate your brow ser , and disable the pr oxy or add the IP addr ess of this produc t into the exceptions . Then, type this pr oduct’ s IP a ddress in the Location (for Netscape ) or Address (for IE) field and press ENTER.
15 4.2 S tatus This option provides the funct ion for observing this product’ s working status: A. W AN Port Status. If the W AN port is assigned a dynam ic IP , there may appear a “ Renew ” or “ Release ” button on the Sidenote colum n. Y ou can click this butt on to renew or release IP manually .
16 4.3 Wiz ard Setup W izard will guide you thr ough a basic configuration pro cedure step by step. Press ”Next >”.
17 Setup Wiz ard - Select W AN T ype : For detail settings, please refer to 4.4.1 primary setup. 4.4 Basic Setting.
18 4.4.1 Primary Setup – W AN T ype Press “Change”.
19 This page is p rimary to enabl e this product t o work properly . The sett ing items and the w eb appearance depend on the W AN type. Choose correct W AN type before you start. 1. LAN IP Address : the local IP address of this device. The computer s on your network must use th e LAN IP address of your product as their Defa ult Gateway .
20 4.4.1.1 Ethernet Over A TM (RFC 1483 Bridged) without NA T This W AN typ e disable the NA T , this device becom es a pure bridge between your LA N and W AN, all the clients in your LAN must have legal IPs. If you en able the NA T feature, you have to set the following W AN IP settings.
21 4.4.1.2 Ethernet Over A TM (RFC 1483 Bridged) with NA T Dynamic IP Address : Obtain an IP address from ISP automatically . Host Name : optional. Re quired by some ISPs, for exam ple, @Home.
22.
23 4.4.1.3 IP over A TM (RFC 1483 Routed) In the Router Mode, NA T is always enabled. Y ou have to set the following W AN IP settings: W AN IP Mode: This product supports two W AN IP modes: static a nd dynam ic. If you select dynamic mode, it will try to get a legal IP and W AN settings from ISP’ s DHCP se rver .
24 4.4.1.4 Classical IP over A TM (RFC 1577) In the Classical IP over A TM Mode, NA T is always enabl ed. Y ou have to set the foll owing W AN IP settings: W AN IP Mode: This product supports two W AN IP modes: static a nd dynam ic. If you select dynamic mode, it will try to get a legal IP and W AN settings from ISP’ s DHCP se rver .
25 button to save the configurati on into Flash memory , and the reboot t his device. 4.4.1.5 PPP over A TM (RFC 2364) Press “ More >> ”.
26 PPPoA Account/Password: The account ID & password provided by your ISP . Maximum Idle T ime: The time of no activity disconnect to your PPPoA se ssion.
27 "Save" button to save the configuration i nto Flash memory , and the reboot t his device. 4.4.1.6 PPP over Ethernet (RFC 2516) PPPoE Account/Password: The account ID & password provided by your ISP . Maximum Idle T ime: The time of no activity disconnect to your PPPoE se ssion.
28 PPPoE Service Name: Optional. Input the service nam e if your ISP requires it. Assigned IP Address: Optional. Required by some ISPs. Once you finished the requi red configuration, you must cli ck on the "Save" button to save the configuration i nto Flash memory , and the reboot t his device.
29 4.4.3 DHCP Server Press “More” The settings of a TCP/IP environment include host IP , Subnet Mask, Gateway , and DNS configurations..
30 It is not easy to m anually configure all t he computers and devices in your network. Fortunate ly , DHCP Server provides a rather simple approach to handle all these settings.
31 W ireless settings allow you to set the wireless configuration items. 1. Network ID(SSID) : Network ID is used for identifying th e W ireless LAN (WLAN). Client stations can roam freely over this product and ot her Access Points that ha ve the same Network ID.
32 4.4.5 Change Password Y ou can change Password here. W e strongly recomm end you to change the system password for security reason..
33 4.5 Forwarding Rules 4.5.1 V irtual Server.
34 This product’ s NA T firewall filters out unrecognized packets to protect your Intranet, so all hosts behind this product are invisi ble to the outside wo rld. If you wish, you can make som e of them accessible by enabling the V irtual Server Mapping.
35 4.5.2 Special AP Some applicat ions require m ultiple connections, l ike Internet games, V ideo co nferencing, Intern et telephony , etc. Because of the firewall function, t hes e applications cannot work with a pure NA T router . The Special Applications fe ature allows some of these applicatio ns to work with this product.
36 4.5.3 Miscellaneous Items IP Address of DMZ Host DMZ (DeMilitarized Zone) Host is a hos t without the protection of firewall. It allows a computer to be exposed to unrestricted 2-way com munication for Int ernet games, V ideo conferencing, Internet telephony and other special applications.
37 4.6 Security Settings.
38 4.6.1 Packet Filter Packet Filter enables you to control what packets are allowed to pa ss the router . Outbound filter applies on all outbound packets. However , Inbound filter applies on packets that destined to V irtual Servers or DMZ host only .
39 For source or destination IP address, you can define a single IP address (4.3.2.1) or a range of IP addresses (4.3.2.1-4.3.2.254). An empty implie s all IP addresses. For source or destination port, you can defi ne a single port (80) or a range of ports (1000-1999).
40 Example 2: (192.168.123.100-192.168.123.1 19) They can do everyt hing except read net news (port 1 19) and transfer files via FTP (port 21) Others are all allowed.
41 (192.168.123.100-192.168.123.149) They are allowed to send m ail (port 25), receive mail (port 1 10), and browse Internet (port 80); port 53 (DNS) i s necessary to resolve the domain nam e. (192.168.123.10-192.168.123.20) They can do every thing (block nothing) Others are all blocked.
42 4.6.2 Domain Filter Domain Filter let you prevent users under this device from accessing specific URLs. Domain Filter Enable Check if you want to enab le Do main Filter . Log DNS Query Check if you want to log the action wh en someone accesses the specific URLs.
43 Example: In this example: 1. URL include “www .msn.com” will be blocked, an d the action will be record in log -file. 2. URL include “www .sin a.com” will not be blocked, but the action will be reco rd in log-file. 3. URL include “www .google.
44 4.6.3 URL Blocking URL Blocking will block LAN computers to c onnect to pre-defined W ebsites. The major difference between “Domain filter” and “URL Blocking” is Domain filter require user to input suf fix (like .com or .or g, etc), while URL Blocking require user t o input a keyword only .
45 In this example: 1.URL include “sex” will b e blocked, and the action will b e record in log-file. 2.URL include “erotica” will be blocked, but the action will be record in log-file 3.URL include “girl” will n ot be blocked, but the action will be record in log-file.
46 4.6.4 MAC Address Contr ol MAC Address C ontrol allows you t o assign diffe rent access right for diffe rent users and to assi gn a specific IP address to a certain MAC address. MAC Address Control Check “Enable” to e nable the “M AC Address Control”.
47 Control table "Control table" is the tab le at the bottom of the "MAC Address Control" page. Each r ow of this table indicat es the MAC address and the expected IP address mapping of a clie nt. There are four columns i n this table: MAC Address MAC address indicates a specific client.
48 4.6.5 VPN setting VPN Settings are settings that are used to create virtual private tunnels to rem ote VPN gateways. The tunnel technology supports data confidentiality , data or igin authentication and da ta integrity of network information by utilizing encap su lation protocols, encryp tion algorithms, and hashin g algorithms.
49 System m anagers of both end gateways only need set t he same pre-shared key . Function of Buttons More : T o setup detailer co nfiguration for ma nual key or IKE approa ches by clicking the "Mo re" button.
50 Local netmask Local netmask com bined with local subnet to form a subnet domain. Remote subnet The subnet of LAN site of rem ote VPN gateway , it can be a host, a partial subnet, and the whol e subnet of LAN site of remote gateway . Remote netmask Remote net mask combined with rem ote subnet to form a subnet dom ain of remote end.
51 • VPN Settings - Set IKE Proposal IKE Proposal index A list of selected proposal indexes from the IKE proposal pool listed below . The selecting acti vity is performed by selecti ng a proposal ID and clicking "add to" button in the bott om of the page.
52 • VPN Settings -Set IPSec Proposal IPSec Proposal index A list of selected proposal i ndexes from the IPSec proposal pool listed bel ow. The selecting activity is performed by selecti ng a proposal ID and clicking "add to" button in the bott om of the page.
53 IPSec proposal. Life time The unit of life tim e is based on the value of Life T ime Unit. If the value of unit is second, the value of life tim e represents the life time of dedicated VPN tunnel between both end gateways . Its value ranges from 300 seconds to 172,800 seconds.
54 4.6.6 Miscellaneous Items Remote Administrator Host/Port In general, only Intranet user can b rowse the built-in web pages to p erform admi nistration task. This feature enables you to perform administration t ask from remote host. If t his feature is enabled, only the specified IP address can perform rem ote administrati on.
55 4.7 Advanced Setting.
56 4.7.1 ADSL Modem Performance Setting Tx Gain Offset This parameter al lows the user to add an offset on the Tx gain of the CPE Modem. The offset range is limi ted between -10 dB and +3 dB with a granularity of 0.5 dB. The default value i s set to 0 dB, no offset.
57 offset. Tx Output Power Offset This paramete r al lows user t o reduce the Tx output power (in the upstream direction). The val ue shoul d be ranged between 0 and 10 dBm. Rx Output Power Offset This parameter al lows user to reduce the Rx out put power .
58 4.7.2 System T i me Get Date and T ime by NTP Protocol Selected if you want to Get Date and T ime by NTP Prot ocol. T ime Server Select a NTP time server to consult UTC time Ti me Z on e Select a time zone where this device locates. Set Date and T i me manually Selected if you want to Set Date and T ime m anually .
59 4.7.3 System Log This page support two me thods to export system logs t o specific destination by means of sy slog(UDP) and SMTP(TCP). The item s you have to setup including: IP Address for Syslog Host IP of destination wh ere syslogs will be sent to.
60 E-mail Subject The subject of email alert. This setting is optional..
61 4.7.4 Dynamic DNS To host your server on a changing IP address, you have to use dynami c domain name service (DDNS). So that anyone wishing to reach your host only needs to know the name of it. Dynam ic DNS will map the name of your host to your current IP address, which changes each time y ou connect your Internet service provider.
62 Username/E-mail Password/Key You will get this information when you register an account on a Dynam ic DNS server. Example: After Dynami c DNS setting is configured, click the save but ton.
63 4.7.5 SNMP Setting In brief, SNMP, the Sim ple Network Management Protocol, is a protocol designed to give a user the capability to remotely manage a computer network by pollin g and setting terminal values and monitori ng network events. Enable SNMP Y ou must check either Local or Rem ote or both to enable SNMP function.
64 1. This device will response to SNMP client which’ s get community is set as “public” 2. This device will response to SNMP client which’ s set community is set as “private” 3.
65 4.7.6 Routing T able Routing T ables allow you to determ ine which physical in terface address to use for outgoing IP data grams. If you have m ore than one routers and subnets, you will need to enable routing table to allow packets to find proper routing path and allow di f ferent subnets to communicate with each other .
66 Example: So if, for example, the host wanted to send an IP data gram to 192.168.3.88, it woul d use the above table to determ ine that it had to go via 192.168.1.33 (a gateway ), And if it sends Packets to 192.168.5.77 will go via 192.168.1.55 Each rule can be enabled or disabled i ndividually .
67 4.7.7 Schedule Rule Y ou can set the schedule time to decide which service at what time will be turned on or off. Select the “enable” item. Press “Add New Rule” Y ou can write a rule name and set which day and what time to schedule from “S tart T ime” to “End T ime”.
68.
69 Schedule Enable Selected if you want to Enable the Scheduler . Edit T o edit the schedu le ru le. Delete T o delete the schedu le ru le, an d the rule# of the rules b eh ind the deleted one will decrease on e automatically .
70 Exanple2: Packet Filter – Apply Rule#1 (ftp ti me: everyday 14:10 to 16: 20)..
71 4.8 T oolbox.
72 4.8.1 V iew Log Y ou can V iew system log by clicking the Vi e w L o g button.
73 4.8.2 Firmwar e Upgrade Y ou can upgrade firmware by clicking Firmwar e Upgrade button..
74 4.8.3 Backup Setting Y ou can backup your settings by clicking the Backup Setting button and save it as a bin file. Once you want to restore these settings, please click Firmwar e Upgrade button and use the bin file you saved. 4.8.4 Reset to default Y ou can also reset this product to factory default by cl icking the Reset to default button.
75 4.8.6 Miscellaneous Items MAC Address for W ake-on-LAN W ake-on-LAN is a technology that enabl es you to power up a networked device remotel y . In order to enjoy this feature, the tar get device must be W ake-on-LAN enabled and you have to know the MAC address of this dev ice, say 00-1 1-22-3 3 -44-55.
76 C C C h h h a a a p p p t t t e e e r r r 5 5 5 P P P r r r i i i n n n t t t S S S e e e r r r v v v e e e r r r WBR-3402 provides the fu nction of net work print server for MS W indows 95/98/NT/20 00 and Unix based platforms. (If t he product you purchased doesn’t have printer port , please skip this chapter .
77 1. Find out the correspon ding icon of your server printer , for e xample, the HP LaserJet 6L . Click the mouse’ s right butto n on that icon, and then select the Pr operties item:.
78 2. Click the Details item: 3. Choose the “PR Tmate: (All-in-1)” from the list attached at the Print T o item. Be sure that the Printer Driver item is configured to the correct driver of yo ur server printer . 4. Click on the button of Port Settings : T ype in the IP address of this product and then clic k the OK button.
79 5.2 Configuring on W indows NT Platforms The configuration pro cedure for a W indows NT platform is similar to that of W indows 95/98 ex cept the screen of printer Properties : Compared to the procedure in last section, the selection of Details is equivalent t o the selection of Ports , and Port Settings is equivalent to Configure Port .
80 5.3 Configuring on W indows 2000 and XP Platforms W indows 2000 and XP have built-in LPR client, us ers could utilize this feature to Print. Y ou have to install your Printer Driver on LPT1 or other ports before you preceed the following sequence. 1.
81 2.Select “Ports” page, Cl ick “Add Port…” 3. Select “Standard TCP/IP Port ”, and then click “New Port…”.
82 4.Click Next and t hen provide the following informat ion: T ype address of server providing LPD that is our NA T device:192.168.123.254 4. Select Custom, then click “Settings…”.
83 6.Select “LPR”, type ” lp “ lowercase letter in “Queue Name:” And enable “LPR Byte Counting Enabled”..
84 7.Apply your setti ngs.
85 5.4 Configuring on Unix-like based Platforms Please follow the traditional configu ration procedure on Unix platforms to setup the print server of this product. The pri nter name is “lp.” In X-W indows, for example, In Redhat Platforms, Please follow the below steps to confi gure your printer on Red Hat 9.
86 2. Click Add---> Forward. 3. Enter the Pinter Name, Com ments then forward..
87 4. Select LPD protocol and then forward. 5. Enter the router LAN IP Address and the queue nam e "lp". Then forward..
88 6. Select the Printer Brand and M odel Name. Then Forward. 7. Click Apply to finish setup..
89 8. At last you m ust click Apply on the toolbox t o make the change take effective. In Command Mode: Linux has built-in LPR client ,Y ou c an utilize it for printing. Y ou can manual set it or vi a the tool "printtool" in X- windows. PS: The spool name is "lp"------all l owercase letter .
90 5.5 Configuring on Apple PC 1.First, go to Printer center (Printer list) and add printer 2.Choose IP print and setup printer ip address (router Lan ip address). 3.Disable “ Default Queue of Server .” And fill in ‘ lp ‘ in Queue name item. 4.
91 A A A p p p p p p e e e n n n d d d i i i x x x A A A T T T C C C P P P / / / I I I P P P C C C o o o n n n f f f i i i g g g u u u r r r a a a t t t i i i o o o n n n f f f o o o r r r W W W i i i.
92 5. Select Micros oft item in the manufactures list. And choose TCP/IP in the Networ k Protocols. Click OK button to return to Network window . 6. Th e TCP/IP protocol shall be listed in the Network window . Click OK to complete the in stall procedure and restart your PC to enable t he TCP/IP protocol.
93 A.2 Set TCP/IP Protocol for W orking with NA T Router 1. Clic k St a r t button and choose Settings , then click Control Panel . 2. Double click Network icon. Select the TCP/IP line that ha s been associated to your ne twork card in the Configuration tab of the Network window .
94 a. Select Obtain an IP address automatically in the IP Address tab . b. Don’t input any value in the Gateway tab..
95 c. Choose Disable DNS in the DNS Configuration tab. B. Configure IP manual ly a. Select Specify an IP address in the IP Address tab. The default IP address of this product is 192.1 68.12 3.254. So please use 192.1 68.123.xxx (xxx is b etween 1 and 253 ) for IP Address field and 255.
96 b. In the Gatewa y tab, add t he IP address of t his product (default IP is 192.168.123 .254) in the New gateway field and click Add button. c. In the DNS Configurati on tab, add the DNS val ues which are provi ded by the ISP into DNS Server Search Order field and click Add button.
97 A A A p p p p p p e e e n n n d d d i i i x x x B B B W W W i i i n n n 2 2 2 0 0 0 0 0 0 0 0 0 / / / X X X P P P I I I P P P S S S E E E C C C S S S e e e t t t t t t i i i n n n g g g g g g u u u i i i d d d e e e Example: W in XP/2000 VPN Router (Configuration on WIN 2000 is similar to X P) 1.
98 Double-click [Administrative T ools].
99 Local Security Policy Settings Double-click [Local Security Policy].
100 Right-clic k [IP Security Policies on Local Computer] , and click [Create IP Security Policy] . Click the [Next] button, enter your policy’s nam e (Here it is to_vpn_router ). Then, click [Next] . Introduction Dis-select the [Activate the default response rule] check box, and click [Next] button.
101 Build 2 Filter Lists: “xp->r outer” and “router ->xp” Filter List 1: xp-> router In the “ new policy’s properties ” screen, select [Use Add Wizard] check box, and then click [Add] button to create a new rule.
102 click [Add] button.
103 Enter a name, for exam ple: xp->router and dis-select [Use Add Wizard] check box. Cl ick [Add] button..
104 In the Source address field, select [A specific IP Address] . and fill in IP Address: 192.168.1.1 In the Destination address field, select [A specific IP Subnet] , fill in IP Address: 192.168.123.0 and Subnet mask: 255.255.255.0 . If you want to select a protocol for you r filter, click [Protocol] page.
105 Click [OK] button. Then click [OK] button on t he “ IP Filter List ” page..
106 select [Filter Action] , select [Require Security] , then click [Edit] button..
107 select [Negotiate security], Select [Session key Perfect Forward Secrecy (PFS)] click [Edit] button..
108 select [Custom] button.
109 Select [Data integrity and encryption (ESP)] Configure “ Integrity algorithm ”: [MD5] Configure “ Encryption algorithm ”: [DES ] Configure “ Generate a new key every [10000] seconds ” .
11 0 select [Authentication Methods] page, click [Add] button..
111 select [Use this string to protect the key exchange (preshared key)] , and enter your preshared key string, such as mypresharedkey . Click [ OK] button.
11 2 configure [The tunnel endpoint is specified by this IP address] : 192.168.1.254 Select [Connection T ype].
11 3 select [All network connections] Tunnel 2: router->xp In the “ new policy’s properties ” page, dis-select [ Use Add Wizard] check box, and then click [Add] button to create a new rule.
11 4 click [Add] button.
11 5 Enter a name, such as router->xp and dis-select [Use Add Wizard] check box. C lick [Add] button..
11 6 In the Source address field, select [A specific IP Subnet] . fill in IP Address: 192.168.123.0 and Subnet mask: 255.255.255.0 . In the Destination address field, select [ A specific IP Address] , and fill in IP Address: 192.168.1.1 If you want to select a protocol for you r filter, click [Protocol] page.
11 7 Click [OK] button. Then click [OK] butt on on [IP Filter List] window..
11 8 select [Filter Action tab] , select [Require Security] , then click [Edit] button..
11 9 select [Negotiate security], Select [Session key Perfect Forward Secrecy (PFS)] click [Edit] button..
120 select [Custom] button.
121 Select [Data integrity and encryption (ESP)] Configure “ Integrity algorithm ”: [MD5] Configure “ Encryption algorithm ”: [DES] Configure “ Generate a new key every [10000] seconds ” C.
122 select [Authentication Methods] page, click [Add] button..
123 select [Use this string to protect the key exchange (preshared key)] , and enter the preshared key string, such as mypresharedkey . Click [OK] button.
124 Configure [The tunnel endpoint is specified by this IP address] : 192.168.1.1 Select [Connection T ype].
125 select [All network connections].
126 Configure IKE pr operties Select [General] Click [Advanced…].
127 enable “ Master key perfect forward security (PFS) ” configure “ Authenticate and generate a new key after every [10000] seconds ” click [Methods…] click [Add] button.
128 Configure “ Integrity algorithm ”: [SHA1] Configure “ Encryption algorithm ”: [3DES] Configure “ Diffie-Helman gr oup ”: [Medium (2)] Settings on VPN router VPN Router: W an IP address:192.168.1.254 Lan IP address:192.168.123.254 PC: 192.
129 VPN Settings: VPN: Enable Max. number of t unnels: 2 ID: 1 T unnel Name: 1 Method: IKE Press “ More ” .
130 VPN Settings - T unnel 1 – IKE T unnel:1 Local Subnet:192.168.123.0 Local Netmask: 255.255.255.0 Remot e Subnet:192.168.1.1 Remot e Netmask:255.255.
131 VPN Settings - T unnel 1 - Set IKE Proposal ID: 1 Proposal Name: 1 DH Group: Group2 Encrypt. Algorithm: 3DES Auth. Algorithm: SHA1 Life T ime: 10000 Life T ime Unit: Sec.
132 VPN Settings - T unnel 1 - Set IPSec Proposal ID: 1 Proposal Name: proposal 1 DH Group: Group2 Encap. Protocol: ESP Encrypt. Algorithm: DES Auth. Algorithm:MD5 Life T ime: 10000 Life T ime Unit: Sec. User can view VPN connection process in “ System Log ” page, and correct their settings.
133 A A A p p p p p p e e e n n n d d d i i i x x x C C C P P P P P P T T T P P P a a a n n n d d d L L L 2 2 2 T T T P P P C C C o o o n n n f f f i i i g g g u u u r r r a a a t t t i i i o o o n n n s s s 1. First, please go to the Net work connection 2.
134 3. Choose Virtual Privat e Network 4. Do not dial to initial connection.
135 5. Input the router wan ip address 6. Then ok, please input usernam e and password as you setup in the router..
136 7. Select the type of VPN.
137 However, you should add the Authentica tion Protocol in advanced(Custom setting) of Security option, like below t o support pap, chap, ms chap. If successfully, we will see: This tim e, the client in the internet can ping any pcs in the lan(192.168.
138 Then the steps refer to pptp settings..
139 A A A p p p p p p e e e n n n d d d i i i x x x D D D 8 8 8 0 0 0 2 2 2 . . . 1 1 1 x x x S S S e e e t t t t t t i i i n n n g g g Figure 1: T esting Environment (Use W indows 2000 Radius Server) 1 Equipment Details PC1: Microsoft W indows XP Professional without Service Pack 1.
140 3.LAN IP address: 192.168.123.254/24. 4.Set RADIUS server IP . 5.Set RADIUS server shared key . 6.Configure WEP key and 802.1X setting. The following test will use th e inbuilt 802.
141 Figure 2: Enable IEEE 802.1X access contr ol.
142 Figure 3: Smart card or certificate properties 4.Window s 2000 RADIUS server Authentication testing: 4.1DUT authenticate PC1 using certificate. (P C2 follows the same test proced u res.) 1. Download an d install the certificate on PC1. (Fig 4) 2. PC1 choose the SSID of DUT as the Access Point.
143 Figure 4: Certificate information on PC1 Figure 5: Authenticating.
144 Figure 6: Authentication success 4.2 DUT authenticate PC2 using PEAP-TLS. 1. PC2 choose the SSID of DUT as the Access Point. 2. Set authentication ty pe of wireless client and RADIUS server both t o PEAP_TLS. 3. Disable the wireless conn ection and enable again.
145 A A A p p p p p p e e e n n n d d d i i i x x x E E E F F F A A A Q Q Q a a a n n n d d d T T T r r r o o o u u u b b b l l l e e e s s s h h h o o o o o o t t t i i i n n n g g g Reset to factory Default There are 2 methods to reset t o default. 1.
146 4.If you can find one device and unreachable. Y ou must setup the sam e submask, For example configure the PC IP address to 192.168.12.xxx. 5. Click “Upgrade Button” and t o upgrade the firmware smoothl y . 6 . I f s u c c e s s f u l l y , p l e a s e use “Reset Button” reset to default the router .
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté LevelOne WBR-3402TX c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du LevelOne WBR-3402TX - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation LevelOne WBR-3402TX, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le LevelOne WBR-3402TX va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le LevelOne WBR-3402TX, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du LevelOne WBR-3402TX.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le LevelOne WBR-3402TX. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei LevelOne WBR-3402TX ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
