Manuel d'utilisation / d'entretien du produit FCS-3102 du fabricant LevelOne
Aller à la page of 121
FCS-9364 OneSecure V ideo Management Software, 64-Channel Amdinstrator Manual For V ersion 3.0. 09 2013/12/ 20.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 2 About This Manua l T arget Audience This manual is intended for S ystem Administrators who are responsible for installing and setting up the OneSecur e s urveillance s ystem.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 3 Conventions Use d in This Manual The following are t ypographic conven tions used in this m anual: Bold : Bold typefac e is used f or a k eyword, m ajor f unctions of NVR, or a title of a section/colum n.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 4 Table of Contents 1 About This Manual 2 T arget Audience..............................................................................................2 Content Overvi ew ............
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 5 Access NVR Server via Internet Explor er .................................................23 From Server Computer Using Local Client ................................... 23 From Remote Client Computer .
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 6 Add Non-LevelOne Cameras ....................................................... 42 Manage Multiple Devices ..........................................................................
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 7 How to Setup FTP Sett ings for Event Rules ................................ 78 System Log ............................................................................................
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 8 Un -install Server Software ......................................................
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 9 Overview OneSecure is a W indows-b ased s oftware that prov ides distributed net work video surveillance solution with full f unctionality .
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 10 System Installation Ch eck List Pre-installation Item T ask Description Reference 1 Prepare software license OneSecure comes with 64 -channel free license.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 11 Settings on pag e 46 12 Configure Record ing Schedule By default , each device will start 7/24 schedule re cording as soon as it i s added . Set recording sched ule for each d evice.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 12 Getting Started System Requirements The M inimum CPU Processor s pec will prov ide acceptable performance for s ystems that use mostly MPEG4 streams. Surveillance systems that use 4 or more H.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 13 computer ’ s m ulti -tasking capability b y adding more RAM, you will need a 64 -bit ve rsion of W indows to take advantage of it all. Please visit the link below for more m emory limitations on various W indows platform s.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 14 Pr erequisites These prerequisites b elow are necessar y before installation: 1. Suitable System Specifications Ensure that the server computer meets the minimum system requirements, and that the server computer has C Driv e .
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 15 3. Move the s lider to “ Never notify position ”, and then cli ck “ OK ”.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 16 Server Installation The server program installation is as eas y as 1-2- 3 b y following t he installati on wizard’s instructions. The server would start its service right af ter installation com pletes, without t he need to restart the server c om puter .
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 17 3. T he IP Port Checker will pop up to conf irm the NVR port num ber with you. The installation program will use 80 as default. Y ou m ay enter another a vailable port number in “ Listen Port ” field and c lick “ Apply ”.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 18 5. After the insta llation com pletes, co nnect to http://local host:port number with In ternet Explorer browser , you will see NVR L ogin page.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 19 W orkstation Installation NVR Workstation includes a set of pro gram s that pro vide interface between use rs and the NVR server . It m ay be installed on the sam e PC as the NVR server , or the y ma y be i nstalled separatel y and connect to NVR Serv er via network .
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 20 License and Activation In OneSecure s ystem, y our requir ed number of channels should be licensed and activate d before connecting th e devices.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 21 Y ou can activate the licens es on your NVR through O ffline Activation . Offline activation does not require Internet ac cess for NVR server. It is used w hen NVR is located in network not connected to public Intern et (e.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 22 V erify Y our License Once your license is s uccessfully activated, th e license inform ation will be sho wn on License page. Important Notice The license data will be erased once OneSecure s erver is uninstalled.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 23 Log In to the Sy stem Access NVR Server via Internet Ex plorer From Server Computer Using Local Client Open Internet Explorer . If your com puter is where OneSecure is ins talled, t ype http://localhost/ or th e com puter ’s ip address in URL box .
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 24 Login Failure T roubleshooting Once you confront with problem s accessing NV R server , refer to the possible conditions below and follow the instruct ion to solve your issues.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 25 3. Press down “ ctrl ”+ “ alt ” + “ Delete ” keys to bring up Window s T ask Manager . Select “ View” , and then “ Select c olumns ”, and enable the “ PID (Process Id entifier) ” t o appear on search results.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 26 Cause 1 : Y our Inte rnet Explorer browser version does not sup port OneSecur e. Solution : Make s ure your browser is 32 -bit vers ion. Cause 2 : Y our bro wser restricts the installat ion of add -on com ponents.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 27 Login A. Enter A ccount & Passw ord Account (non cas e-sensitive) : Admin (default) Password ( case-sensitive) : 123456 (default) B. Change UI languag e T o change UI language, select the des ired language from “ Langu age ” dropdown list.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 28 Access NVR Server via OneSecure W orkstation OneSecure W orkstation includes a set of program s that provide interf ace between users and the NVR server .
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 29 E. Remember Login Inf ormation T o have OneSecure Workstation rem ember the Account , Password, your choices of Initial Page a nd UI L angua ge , sim ply check “ Remember login info ” .
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 30 5. Y ou can export the saved server s ites, or import it to a nother Workstation client com puter . Access NVR server v ia Onew Secure Workstation , go to Setup page System tab Workstation .
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 31 Set up the System This chapter will guide y ou throu gh e verything you need to kno w in S ystem Setup proc edure from first time connec tion with On eSecure server to general s y stem configuration.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 32 System Settings Y ou can adjust the E-mail & SMTP settings, FTP settings for ev ent rules now or later . For more details a bout the s ettings, please r efer to How to Setup SMTP Settin gs f or Event Rules on page 77 and How to Setup F TP Settings for Event Rules on page 78 .
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 33 Licensing This is the license m anagem ent section. On lower right part of th e screen shows num ber of channels allowed un der your current licens e. Each NVR server h as a license f or 64 channels that is alread y activated.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 34 NVR Main Screen Y ou will enter the l ive vie w s creen after Setu p Wizar d . On the right are link butt ons to three NVR m ajor functions: (1) Live view , (2) Playback and (3) Setup .
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 35 Add Devices Cameras or video encoders are the f undamental building blocks of surveillance sy stem s. T o manage cam eras from OneSecure , you h ave to ad d camera devices into On eSecure s ystem first.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 36 3. T here are three ways to add de vices into the system, Search Devices , Search ONVIF Devices , and Add Device M anually . - Use Search D evices to aut o search LevelOne cameras located in the same subnet as your NVR serv er .
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 37 2. Select the row of the cam era you wish to add to th e s ystem and r epeat this step until y ou have check ed all the devi ces you need . Pleas e note that t he list of devices is shown regardless of the acc ount nam e and password.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 38 A dd De vices on W AN or Other Local A rea Networks 1. After selecting “ Add Devic e Manually ” , the camera settings page will appear as below .
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 39 2. Click “ G et Dev ice Setting s ” to h ave NV R c ontact the device a nd get t he live view . Once connected to the device, NVR will get all the device properties suc h like Brand , Model , Device Serial Number , Firmw are V ersion .
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 40 IP address Enter the camera’s IP address or host nam e. Brand Select the m anufacturer of device. Model Select the device m odel of the IP cam eras / video servers. In most cases, this is autom atically f illed in after you c lick Get Device Setting .
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 41 Status Icon Description Icon Status Description NVR server cannot retr ieve video stream ing. T his ma y be th at a vid eo server is not connected with cam eras, or that the stre aming is blocked b y the firewall between the de vice a nd N VR server .
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 42 A dd Non-Le velOne Cameras In this section, we will guide you through h ow to add devices to O neSecure s ystem.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 43 If the device you wish to a dd supports ONVIF , you ca n sel ect “ONVIF” f or M edia T ype , and the settings page will appear as below .
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 44 Manage Multiple Devices After adding several d evices to the s ystem, you m ay g et an o verview of all devi ce s on Setup page Dev ice t ab; th is is where you m ay use certai n fas t and conve nient approaches to manage a number of devices.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 45 Copy Settings A cross Devices W hen setting a larg e number of devices, many settings wi ll resemble other ones, and it is sometimes tiresome to repeat ever y setting again and again.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 46 A dd Video Streams from a Multi-channel Device There are devices that output m ore than one vid eo streams to NVR.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 47 Configure Device Settings After adding a de vice to NVR, you ma y continue to configure its video, motion detecti on, PTZ or preset tour settin gs on S etup page Dev ices tab.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 48 you have selected “ Unlimit ed ” for Maximum Bitrate . The actual value will fluctuate slightl y based on scene changes . * 1 Available when NVR is connected to a multi-s treaming device.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 49 Event Recording w ith Frame Rate A djustment Keeps recordin g all the way withou t losing a ny single m oment; lower fram e rate can be s et for non -event record ing, which consum es only a little stor age.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 50 Scenario B : Suppose y ou wish the system to record 24 /7, the non -event record ing to be kept at very low frame rate.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 51 V ideo A djustment Attributes Field Categor y Field Name Description Image V ideo Flipping / V ideo M irroring Check this box to flip the video vertically and horizontally to achieve a 180 -degree rotation effect.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 52 White Balance Select between “ Auto ” or “ M anual ” W hite Balance mode.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 53 Configure Motion Settings T o make use of the m otion and PIR detection functions supported by y our devices, you n eed to configure the detection regions an d settings.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 54 4. W hen the setting is finished, click “ Apply ” to save, then “ Close ” to exit this page.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 55 Configure PTZ Device PTZ devices can do panning, t ilting and zooming automatically or through manipulation.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 56 Parity Parity is the data v alidation m echanism f or analog devices that use serial port interface to s end or receive data.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 57 There are two kinds of PTZ navigation: Optical PTZ Navigat ion 1. Get the live view f rom Liv e Preview window: Make sure the “ .
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 58 3. Use panel contro ls to operate PTZ m ovements: Click a button on the p anel to start, the re d crosshair will appear in the view . Digital PTZ Navigation Digital PTZ allows you to zoom into part of the video and enlarg e it t o displa y on scr een.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 59 Set PTZ Preset Points W ith PTZ devices, y ou m ay def ine a view by where t o look (through p anning an d tilting) and how close (t hrough zooming) to zoom.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 60 Set PTZ Command If your speed dom e or P TZ device has a special function not support ed in the standard protocol, you may input it in PTZ Command list and execute it. Ex: Activate the wiper to clean the window of the PT Z.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 61 4. After a tour is s aved, it is availabl e on Liv e View page PTZ control panel. Configure Fisheye Cameras W ith hem ispherical lenses , fisheye c ameras generate images at up to 360 -de gree width, which can cover all four corner s of a r oom or both sides of a long ais le.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 62 Full support for al l types of dewarped vide o stream output f rom fishe y e cam eras with in -cam era dewarping capabilit y .
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 63 Fisheye M ode Description PTZ Navigation Original View The very raw fishe ye view Digital PTZ Dewarping One large user -defined cr.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 64 Quad Four sm all user-defined cropped reg ions ePTZ 3. After the configuration is done, rem ember to click “ Apply ” to save the settin gs.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 65 Schedule Recording s Unlike the traditio nal analog surve illance s ystem, the I P surveillance s ystem provides a target-oriented recording schedule for devices; the view of each device can be recorded based on your required tim e segments and event t ypes.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 66 Post-event Recording Buffer (sec): This will determine how long after the event is trigg ered should be included in t he event r ecording f ile. Available ch oices are 10 , 30 , 60 , 120 , 180 , an d 300 seconds .
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 67 Set the Schedule Here y ou can configure camera ’ s recording schedule on 7 days / 24 hours ba sis.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 68 Use Time Setting Quick Buttons to Set the Time in One Click Select the recordi ng m ode, then click one of these buttons to apply the m ostly - used tim e settings. Click to apply sc hedule for all day .
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 69 Click to clear all schedule sett ing in this devic e . Lock Specific Days Clicking the da y of the week will lock/unlock that da y from schedule setting. You can shield schedule on a certain da y from being changed by chan ges in other weekda y s.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 70 Copy an Existing Schedule to Others W ith plenty of devices in your system, it happens that you want t o appl y the same schedule to multiple devices. After creating a schedule f or one device , you can copy it to other cam eras .
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 71 Vie w the Entire Recording Schedule On Setup page Schedul e tab, c lick A ll D evices on Device List , an overview of all device schedules will be listed o n the right.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 72 Event Manage ment W hen som ething happens on c amera site, such as someone walks b y , the door opens or closes, a fire break s out or the sun g oes do wn – these are all Events .
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 73 How to Edit an Event Rule 1. Go to S etup page Ev ent tab. All the editable event rules are listed in t he d evice ID order . 2. Select a de vice from the D evice List on t he left.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 74 Y ou can enable m ultiple responses b y first checking the box(es) to enable the item s: Action Items Function Description This kind of action will focus your attention on the channel when triggered.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 75 4. After conf iguring the actions, click “ Apply ” to save this response. 5. Go to Setup page Schedule tab and set the Event Hand ling sc hedule for t his de vice.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 76 6. T o check i f this r ule i s successfully set, please mak e sure y ou have properly configured the involved (1) trigging side s.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 77 Delete the Event Rule s On Event List , sel ect the rules you wish to delete, an d then click “ Delete ” to clear this rule. How to Setup SMTP Settings for Event Rules OneSecure supports e-m ail notification for Event Handling sent through an SMTP serv er.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 78 Field Name Description Server Input the sender ’s SMT P s erver address . Onl y alphabets, numbers , and the symbols (.) , (_) , ( -) are valid. SMTP Port Set the SMTP port, allowed value is from 1~ 65535 , default is 25 .
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 79 2. Fill in each of the following fields. Field Name Description Server Input the F TP s erver address. Onl y al phabets, numbers , and t he symbols (.) , (_) , (-) are valid Port Set the FTP port, allowed value is f rom 1~65535, def ault is 21 .
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 80 System Log The activities perform ed by logged - in Us ers are recorded on server as System Log . W ith the access permission, a user may view , search and export this record for analysis or investigation.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 81 Choose Log T y pe Y ou m ay filter t he lo gs b y T ype , Use r Account , and D evice by s electing fr om dropdown list, t hen click “ Search ”. By default, a ll types are selected.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 82 The following user be haviors are recorded in NVR server: T ype Description User Operation Login, Logout, Ma nual Record,Trigger D.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 83 Storage Manag ement This s ection describes how to manage stor age spac e in NVR. Please note that this sec tion only deals with the o verall storage rules, and not storage of individual channels.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 84 2. After selecting the disk drive, please set the deletion rule. There are two ways to delete recordings, w hen both are active, N.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 85 Manage User Gr oups/ Users The Us er Groups/Users page allows you to (1) m anage the access perm issions of different user groups, (2) add users to or delete them from user groups, (3) and assign users to specific user group.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 86 domain network. As OneSec ure runs on a server computer logged on to the sam e do main with Active Director y serve r , you can import a user accou nt or a group from those concurrently existing in Act ive Director y into NVR ser ver .
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 87 The domain users within that group will all be added t o NVR ser ver at the sam e time. T o view the whole users within t his group, please select and enable the “ Show users in do main groups.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 88 Y ou m ay copy the Device Permissions Settings to other devices. Click “ Co py ” un der Device Permissions tab to bring up the target device m enu, check the target devices, and click “ Apply ”.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 89 Note Account /Passw ord Rules 1. Account and Passw ord fields allow alp habets , n umbers, and s ymbols except th e following: / [ ] : ; | = , + * ? < > " 2. In Account field, for alphab ets, the input will be reco gnized as lowerc ase letters.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 90 Domain: company .com Domain Users Management As NVR ser ver com puter is logged on t o a dom ain Acti ve Director y , it c an im port a user account from Active Director y . This type of User account is “ Domain User ”.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 91 Customize V iews After all devices are conf igured, you may start customizing the v iews for different users and purposes. This chapter will teach you how to add video s ource, arrange the chann els and manage live view la youts.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 92 Step 1: Create a New V iew On V iew T ool Bar , c lick the Create View button , input the V iew Name , add a New Group for this View and decide w hether this grou p is to be Public or Priv ate , and then c lick “ Apply ”.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 93 Step 4: A dd Video Source In edit mode, m ove the mouse o ver the channel and click . Y ou m ay also directl y pull a camera from the Device panel to your desired channel. Remove the camer a view : right- click on th e channel and select “ Remove ”.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 94 Map brigh tness : T o change the map brightness , right-click on the map, select “ Map Mask ” and t he brightness perc entage level. Map size : By default, the m ap will be displayed in its original si ze.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 95 Manage maps : All the uploaded images are managed under Map Image M anager . On Live V iew screen, you may go to M ap Image Manager to view , up load or delete the m aps. Step 6: A dd Devices to the Map Pull a device from Device List to th e map.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 96 Step 7: A djust the Channel Size & Layout Adjust the chann el size : Click on right lower corne r of the channel window , drag a nd then release.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 97 Step 10: Set Default Hotspot Channel (Optional) By system def ault, the global hotspot c hannel will alwa ys be the top left one. Y ou can set any other channel on your live view screen to be t he default hotspot chan nel.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 98 T o reset the ePT Z navigation area back to default viewing an gle, right -click to bring up channel menu, and t hen click “ Reset ”. 3. click on View T ool Bar to save the co nfiguration.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 99 Set View Link By creating a link button on a m ap view , you can directly be link ed to another spec ific view b y clicking the button. O n the picture be low shows how to create a link button to 7F View on 1 1F View .
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 100 O n View T oolbar , click then select C reate Patrol . 1. Input the Patrol N ame 2. Select the P atrol T ype to b e either available for a ll Users or to th e creator ’s account onl y .
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 101 T ips to Enhance Live Vie w Performance Live view for m ultiple channels requires sufficient computing po wer to run the perform ance. In certain extreme cases, lik e w hen v iewing several m egapixel H.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 102 Setting . Let Windows A utomatically Start with NVR Liv e View Y ou m ay have the client ap plication autom atically run and open th e live view after Windows starts. In this wa y , you may save steps and tim e before you eventu ally see the des ired live view screen.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 103 Customize Syste m Language NVR server supports m ultiple languages f or user interface displa y . T here are alread y 10 translated la nguage f iles in the ser ver system. Each l anguage is op en to custom ization based on your ow n needs.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 104 Edit User Interface W ordings Each language file conta ins four editable string ta bles. Each table displ ays the d efault wordings in English and the translation in targ et language.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 105 Export / Import Language String File Y ou m ay also click “ Export ” to ex port the language file as .xm l form at to edit in Notepad , or “ Import ” to im port a language file to use in the system .
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 106 Display Configur ations Y ou can chan ge the user interf ace s tyle b y arr anging the main screen an d Panel / Device List on the right or l eft. Go to Setup page System tab Settings , in User Interface Style section, select the setting st yle then click “ A pply ”.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 107 V ideo & Snapsho t Export Configu rations The snapshots taken by Users on Live V iew and all exported video files are saved to a default file location, and you may configure the desti nation on NVR ser ver .
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 108 Joystick On OneS ecure, ot her tha n user interf ace PT Z panel an d m ous e operat ion, you m ay also control the PT Z m ovem ents by physical contr ollers.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 109 Un - ins tall Server Software In certai n c ases, un-installation of NVR system is necessar y , for example, (1) you want t o ter.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 1 10 Step 2: Remove OneSecure Server Program Folder (Optional) If y ou are performing a com plete un-inst allation without leaving any NVR server r elated data on the current com puter , you ma y consider deleti ng this folder .
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 111 Back Up System Da ta Making regular s ystem backups is alwa y s recomm ended in cas e of unexpected disasters or accidents that may damage NVR server .
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 1 12 Step 2: Back up Recording Files Folder (Optional) Back up th e whole Record ings f older(s) that sa ves the recorded video files on storage hard drive(s).
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 1 13 Restore System Data Before starting restor ing the system , make sure you have done t he following: (1) Re -activate the l icense . If you have d one un- installation previousl y , a nd the num ber of channels to b e r ecovered is over 16 .
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 1 14 System Migration NVR server s ystem m igration is necess ary when you need to replace your cu rrent server computer .
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 1 15 Advanced Administrative T asks T o assist the NVR administrator in monito ring the server status and basic trouble- shooting, the OneSecure A dministrato r T o ol is installed along with NVR server pro gram on the server computer .
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 1 16 Change A uthentication Method Y ou m ay enable the Dige st auth entication other tha n the basic wa y . W ith this method, User ’ s credentials are encr ypted using MD5 algorithm .
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 1 17 Set an NVR Server as a Redundancy Server You can assign an NVR server as a redundanc y server for other NVR server.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 1 18 License Registration W ith a successful purchase, you will receive a license k ey for registration 1. Enter Administrative T ool interface y clicking the icon on W indows task bar .
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 11 9 After the registration, th e license inform ation will appear on this pa ge..
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 120 Set up Redundancy Server 1. Go to th e “ Storage ” page to set up the storag e space conf iguration 2. Go to “ Target ” page to edit the list of the target NVR servers. Click “ A dd ” and fill in the connection properties of the NVR server and click “ Apply ”.
OneSecur e V ideo Management Softwar e Amdinstrator Manual V3.0.09 121 3. After you click “ Yes ” to conf irm ths configuration, this NVR will immediate turn into an redundanc y server on a first -come-f irst-serve basis. By entering “ Serv ice ” page, you can observe the servi ce status .
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté LevelOne FCS-3102 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du LevelOne FCS-3102 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation LevelOne FCS-3102, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le LevelOne FCS-3102 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le LevelOne FCS-3102, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du LevelOne FCS-3102.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le LevelOne FCS-3102. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei LevelOne FCS-3102 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
