Manuel d'utilisation / d'entretien du produit WS-9035TWC du fabricant La Crosse Technology
Aller à la page of 19
WS-9035TWC Wireless 433 MHz Radio-controlled Weather Station Instruction Manual.
2 TABLE OF CONTENTS Topic Page Inventory of Contents/ Additional Equipm ent 3 About WWVB 3 Quick Set-Up Guide 4 Detailed Set-Up Guide Battery installation 5 Program Mode Program Sequence and Default S.
3 INVENTORY OF CONTENTS 1. The WS-9035U weather station (Figure 1). 2. One TX8U remote tem perature/hum idity sensor (Figure 2). 3. One TX15U wind speed sensor (Figure 3). 4. Mounting hardware 5. Instruction m anual and warranty card. ADDITIONAL EQUIPMENT (not included) 1.
4 QUICK SET-UP GUIDE Hint: Use good quality Alkaline Batteries and avoid rechargeable batteries. 1. Have the indoor weather station, rem ote tem perature/humi dity sensor and wind speed sensor 3 to 5 feet apart . 2. Insert the telephone plug (RJ-11) from the wind speed sensor into the receptacle on the remote tem perature/humidity sensor.
5 1. Remove the battery cover. To do this, insert a solid object in the space provided at the lower-central position of the battery cover, then push up and pul l out on the battery cover. 2. Observe the correct polarity, and install 3 AA b a tteries. 3.
6 III. SETTING THE LCD CONTRAST 1. Press and hold the SET button for 5 seconds. 2. “LCD” will show in th e TIME LCD and the number setting will flash . Note: There are 8 LCD contrast levels to choose from—“Lcd 0” is the lightest, and “Lcd 7” is the darkest.
7 2. “LCD” will show in th e TIME LCD and the number setting will flash . 3. Press and release the SET button three times. 4. “RCC” will appear in the DA TE LCD and “ON” or “OFF” will flash in the TIME LCD. 5. Press and release the ALM/+ button to select radi o-controlled ti me on or off.
8 IX. SETTING THE YEAR, DAY AND MONTH Note: Reception of the WWVB signal will al so set the date and day. The recep tion of the signal will override any programm ed date and day. 1. Press and hold the SET button for 5 seconds. 2. “LCD” will show in th e TIME LCD and the number setting will flash .
9 4. Either “1”, “2” or “3” w ill flash in the TIME LCD and the forecast icon and tendency arrows will flash in the FORECAST LCD. 5. Press and release the ALM/+ button to select the forecast sensitivity 6. Press and release the SET button to confirm the forecast sens itivity and com plete the programming.
10 Sunny —indicates that the weather is exp ected to improve (not that the weather w ill b e sunny). Sun with Clouds —indicates that the weather is expected to b e fair (not that the weather will be sun ny with clouds). Clouds with Rain —indicates that the weather is expected to get worse (not that the weath er w ill be rainy).
11 2. Press and release the OUT/MIN button again (once while “MAX” is still d isplayed, twice otherwise). “MIN” appears to the right of the outdoor tem perature, indicati ng that the mi nimum t emperature and the time and date of occurrence are displayed.
12 1. Press and hold the SET button for 5 seconds. 2. The record will now b e reset and show the current time in the TIME LCD an d dew point reading in th e OUTDOOR LCD. To return to the outdoor tem perature/hum idity viewing m ode: 1. Press and hold the OUT/MIN but ton for 5 seconds.
13 Wind Speed Beaufort Number or Force mph km/hr knots Description Effects Land / Sea 0 <1 <1 <1 Calm Still, calm air, smoke will rise vertically . Water is mirror-like. 1 1-3 mph 1-5 kph 1-3 knots Light Air Rising smoke drifts, wind vane is inactive.
14 9 47-54 mph 75-88 kph 41-47 knots Strong Gale Slight damage occurs to buildings, shingles are blown off of roofs. High waves (6 meters), rolling seas, dense foam, Blowing spray reduces visibility. 10 55-63 mph 89-102 kph 48-55 knots Whole Gale or Storm Trees are broken or uprooted, building damage is considerable.
15 MOUNTING Note: Before permanently mounting ensure that the indoor weather station is able to receive WWVB signals from the desired location. Also, extreme and sudde n changes in temperature w ill d.
16 II. THE REMOTE WIND SPEED SENSOR The remote wind speed sensor can be m ounted two ways: • With the use o f screws • Using nylon straps A. MOUNTING WITH SCREWS 1) Unlock the mounti ng bracket from the rem ote wind speed sensor leaving t he wire going through the bracket.
17 5) Place the remote temperature/hum idity sensor and indoor weather st ation in position so the stra ight-line signal is not passing through more than t wo or three walls.
18 SPECIFICATIONS Weather data measuring range: Indoor: 14.2 ° F to 139.8 ° F with 0.1 ° F resolution (0 ° C to 59.9 ° C w ith 0.1 ° C resolution) “OFL” displayed if out side this range Outdoor and dew point: -21.8 ° F to 157.8 ° F with 0.
19 WARRANTY INFORMATION La Crosse Technology provides a 1-year warranty on this weathe r stat ion. Contact La Crosse Technology i mmedi ately upon discovery of any defects covered by t his warranty. Before sending the W eather Station in for repairs, contact La Crosse Tech nology.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté La Crosse Technology WS-9035TWC c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du La Crosse Technology WS-9035TWC - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation La Crosse Technology WS-9035TWC, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le La Crosse Technology WS-9035TWC va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le La Crosse Technology WS-9035TWC, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du La Crosse Technology WS-9035TWC.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le La Crosse Technology WS-9035TWC. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei La Crosse Technology WS-9035TWC ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
