Manuel d'utilisation / d'entretien du produit Z1 du fabricant Konka Group
Aller à la page of 58
INSTRUCTION MANUAL.
2 B EFORE YOU BEGIN Thank you for purchasing this digital camera. Please take the time to read through this instruction manual so you can enjoy all the features of your new camera. Check the packing list before using this product. If any items are missing, immediately contact your camera dealer .
3 Read and understand all warnings and cautions before using this product. Using batteries improperly can cause them to leak harmful solutions, overheat, or explode which may damage property or cause personal injury . Do not ignore the following warnings.
4 F OR PROPER AND SAFE USE • Keep batteries or small parts that could be swallowed away from infants. Contact a doctor immediately if an object is swallowed. • Store this product out of reach of children. Be careful when around children not to harm them with the product or parts.
5 • Do not use or store the product in a hot or humid environment such as the glove compartment or trunk of a car . It may damage the product and batteries which may result in burns or injuries caused by heat, fire, explosion, or leaking battery fluid.
6 T ABLE OF CONTENTS The basic operation of this camera is covered between pages 12 and 33. This section of the manual covers the camera parts, preparation of the camera for use, and the basic camera operation for recording, viewing, and deleting images.
7 Deleting single images ............................................................................................................31 i + button ........................................................................................................
8 T ABLE OF CONTENTS Sharpness................................................................................................................................64 Custom key function ......................................................................
9 System requirements ...............................................................................................................93 Connecting the camera to a computer ...............................................................................
10 N AMES OF P ARTS * This camera is a sophisticated optical instrument. Care should be taken to keep these surfaces clean. Please read the care and storage instructions in the back of this manual (p. 109). NAMES OF P AR TS Shutter-release button Lens* Self-timer lamp (p.
11 Viewfinder* (p. 17) LCD monitor* Access lamp Exposure-mode dial (p. 21, 29, 36 - 40) Accessory shoe (p. 43) Controller Zoom lever (p. 20) Menu button Quick View / Delete button (p. 30, 31) Information button (p. 28, 32) Mode switch Main switch DC terminal Flash-mode button (p.
12 G ETTING UP AND RUNNING GETTING UP AND RUNNING Always keep the strap around your wrist in the event that the camera is accidentally dropped. An optional leather neck strap, NS-DG1000, is also available from your Minolta dealer . Availability varies with region.
13 INSERTING BA TTERIES Insert the batteries as indicated on the diagram on the inside of the battery-chamber door . Confirm the positive and negative battery terminals are oriented correctly . T o open the battery-chamber door , slide the lock to the open position (1).
14 G ETTING UP AND RUNNING BA TTERY CONDITION INDICA TOR Full-battery indicator - the battery is fully charged. This indicator is displayed for three seconds on the monitor when the camera is turned on. Low-battery indicator - battery power is low . The battery should be replaced as soon as possible.
15 CONNECTING THE OPTIONAL AC ADAPTER 1 The AC Adapter allows the camera to be powered from an electrical household outlet. The AC Adapter is recommended when the camera is interfaced with a computer or during periods of heavy use. AC Adapter model AC-1L is for use in North America, Japan, and T aiwan, and AC-1 1 is for use in all other areas.
16 G ETTING UP AND RUNNING CHANGING THE MEMORY CARD An SD Memory Card or MultiMediaCard must be inserted for the camera to operate. If a card has not been inserted, a no-card warning is displayed on the monitor . For more about memory cards see page 1 1 1.
17 TURNING ON THE CAMERA AND DISPLA YS Press the main switch to turn the camera on. Pressing the switch again turns the camera off. Around the main switch is the mode switch. This switch is used to change between the recording and playback modes as well as the selecting the between the monitor and viewfinder display .
LCDbrightness Power save Inst.Playback Lens acc. Language 18 G ETTING UP AND RUNNING SETTING THE DA TE AND TIME After initially inserting a memory card and batteries, the camera’s clock and calendar must be set. When images are recorded, the image data is saved with the date and time of recording.
19 Use the right key to highlight the third tab at the top of the menu. Use the down key to highlight the date/time-set menu option. Press the central button to display the date/time setting screen. Use the left and right keys to select the item to be changed.
20 B ASIC RECORDING BASIC RECORDING While using the viewfinder or LCD monitor , grip the camera firmly with your right hand while supporting the body with your left. Keep your elbows at your side and your feet shoulder-width apart to hold the camera steadily .
21 RECORDING IMAGES AUTOMA TICALL Y T urn the exposure-mode dial to the auto-recording position (1); all camera operations are now fully automatic. The autofocus, exposure, and imaging systems will work together to bring beautiful results effortlessly .
22 B ASIC RECORDING Press the shutter-release button all the way down to take the picture. The example uses auto recording. Except for movie recording, the operation for other exposure modes is the same. Automatic Digital Subject Program Selection is only active in the auto recording mode.
23 AUTOMA TIC DIGIT AL SUBJECT PROGRAM SELECTION Automatic Digital Program Selection chooses between program AE and one of five digital subject programs.
B ASIC RECORDING 24 Focus lock prevents the AF system from focusing. This can be used with of f-center subjects or when a special focusing situation prevents the camera from focusing (p. 25). Without lifting your finger from the shutter-release button, recompose the subject within the image area.
25 The focus signal in the lower right corner of the LCD monitor indicates the focus status. The shutter can be released even if the camera cannot focus on the subject. The camera may not be able to focus in certain situations. If the autofocus system cannot focus on a subject, the focus signal will turn red.
26 B ASIC RECORDING Autoflash Fill-flash Slow sync. Autoflash with red-eye reduction T o use the built-in flash, simply raise it (1). Lower the flash unit to prevent it from firing. T o change the flash mode, simply press the flash mode button (2) until the appropriate mode is indicated.
27 If the shutter speed falls below the point where the camera can be safely hand held, the camera-shake warning appears on the LCD monitor . Camera shake is slight blurring caused by subtle hand motion and is more pronounced at the telephoto position of the lens than at the wide-angle.
28 B ASIC RECORDING The information (i + ) button controls the monitor display . The display changes between full display and live image only . Full display Live image only Information button i + BUTTON ADJUSTING MONITOR BRIGHTNESS Set LCD brightness :select :enter Low High The monitor image can be made lighter or darker .
29 DIGIT AL SUBJECT PROGRAMS Sports action - used to capture action by maximizing shutter speeds. The AF system continuously focuses; see page 25. When using flash, the subject must be within the flash range (p. 27). A monopod is more flexible and compact than a tripod when shooting events.
Images can be viewed in the Quick View or playback modes. This section covers the basic operations in both modes. The playback mode has additional functions, see page 68. T o view images from the playback mode, turn the mode switch to the playback position (1).
31 The histogram shows the luminance distribution of the image from black (left) to white (right). The 256 vertical lines indicates the relative proportion of that light value in the image. The histogram can be used to evaluate exposure, but displays no color information.
32 B ASIC PLA YBACK Full display Index playback In index playback, the four-way keys of the controller will move the yellow border . When the image is highlighted with the border , the date of recording, the lock and printing status, and the frame number of the image are displayed at the bottom of the screen.
33 ENLARGED PLA YBACK Use the four-way keys of the controller to scroll the image. When scrolling, the arrows in the display will disappear when the edge of the image has been reached. In single-frame playback in Quick View or the playback mode, a still image can be enlarged up to 6X in 0.
34 A DV ANCED RECORDING ADV ANCED RECORDING This section cover the advanced recording features of this camera. Read the basic recording section before moving on to this section. 3. Flash-mode indicator (p. 26) 7. White-balance indicator (p. 58) 8. Camera-sensitivity (ISO) display (p.
35 SUPER MACRO Approximate location of CCD plane Wide-angle position: 17 - 107cm (6.7 - 42.1 in.) T elephoto position: 127 - 257cm (50.0 - 101 in.) Super-macro indicator Super Macro allows the camera to focus as close as 4 cm (1.7 in.) from the front of the lens or 9 cm (3.
The photographer selects the aperture and the camera sets the appropriate shutter speed to ensure the correct exposure. When aperture priority is selected, the aperture value on the monitor turns blue and a double arrow indicator appears next to it. The flash mode can be set to fill-flash, fill-flash with red-eye reduction, or slow sync.
The aperture controls not only exposure, but also depth of field; the area between the closest and the furthest object in focus. The larger the aperture value, the greater the depth of field. The smaller the aperture value, the shallower the depth of field.
Manual exposure mode allows individual selection of shutter speeds and apertures. This mode overrides the exposure system giving the photographer total control over the final exposure. 38 A DV ANCED RECORDING Use the up/down keys of the controller to change the shutter speed.
A message is displayed during the exposure. Noise-reduction processing is applied to the image after the exposure. Noise reduction can be canceled in section 3 of the setup menu (p. 91). T ime photographs can be taken in the manual-exposure mode. Exposures up to thirty seconds can be made.
Before recording, the frame counter shows the maximum time in seconds that can be recorded on the next movie clip. 40 A DV ANCED RECORDING Recording time Frame the picture as described in the basic recording operation section (p. 22). Press the shutter-release button partway down to set the the focus and exposure.
41 T o adjust the exposure, press the left or right controller key; the exposure-compensation screen appears. Use the left/right keys of the controller to adjust the exposure-compensation value.
42 A DV ANCED RECORDING Press the shutter-release button partway down or press the central button of the controller to select the area; the other two areas disappear . Only when a focus area has been selected, can the controller be used for other camera operations.
43 A TT ACHING A MINOL T A ACCESSOR Y FLASH T o extend the versatility of the camera, an accessory flash unit (sold separately) can be used. Always remove the accessory flash when the camera is not in use, and replace the accessory-shoe cap to protect the contacts.
44 A DV ANCED RECORDING Press the central button of the controller to select the highlighted setting; some options open a selection screen. On the P , A, S, and M menu, use the left/right keys of the controller to highlight the appropriate menu tab; the menu changes as the tabs are highlighted.
45 Drive mode Image size Quality Auto DSP Digital zoom Single 2048x1536 Standard On Off Drive mode Image size Quality Focus mode Digital zoom Single 2048x1536 Standard Auto focus Off Drive mode Image size Quality Key func.
46 A DV ANCED RECORDING The drive modes control the rate and method images are captured. The drive mode is set on all menus except the movie menu. With auto recording and Digital Subject Programs, the drive mode is reset to single-frame advance when the exposure-mode dial is moved to another position or the camera is turned off.
47 Used for self-portraits, the self-timer will delay the release of the shutter for approximately ten seconds after the shutter-release button is pressed. The self-timer is set on section 1 of the recording menus (p. 44). The self-timer can be used to minimize camera shake with long exposures.
48 A DV ANCED RECORDING USING THE CONTINUOUS-ADV ANCE MODES The continuous-advance drive modes allow a series of images to be captured while holding down the shutter-release button.
49 The number of images that can be captured at one time depend on the image-quality and image-size setting. The maximum rate of capture is approximately 1.5 fps. The built-in flash can be used, but the rate of capture is reduced because the flash must recharge between frames.
Drive mode Image size Key func. Self-timer Single Progressive Bracketing Quality Continuous 50 A DV ANCED RECORDING USING THE PROGRESSIVE-CAPTURE MODES The Progressive-Capture drive modes continuously record images while holding down the shutter-release button.
51 Standard Progressive Capture records the last six images saved in the camera’s buf fer memory . When a series is captured, a thumbnail of each image shown in a six frame index display while being saved. The maximum rate of capture is approximately 1.
Drive mode Image size Key func. Self-timer Single Progressive Bracketing Quality Continuous This mode makes a three-image bracket of a scene. Bracketing is a method of taking a series of images of a static subject in which each image has a slight variation in exposure.
53 Number of frames in bracketing series Frame counter When using exposure compensation (p. 41), the bracketing series will be made in relation to the compensated exposure. Under extreme conditions, one of the bracketed exposures may be inaccurate because it is outside the exposure control range of the camera.
Changing image size affects the number of pixels in each image. The greater the image size, the larger the file size. Choose image size based on the final use of the image - smaller images will be more suitable for web sites whereas larger sizes will produce higher quality prints.
55 Fine Standard Economy 91 4 2 2 6 9 17 27 39 100 32 47 69 150 Approximate number of images that can be stored on a 16MB memory card. Quality Size 2048 X 1764 1600 X 1200 1280 X 960 640 X 480 Fine Standard Economy 1.1MB 770KB 550KB 160KB 720KB 450KB 310KB 130KB 430KB 280KB 200KB 90KB Approximate file sizes.
56 A DV ANCED RECORDING AUTO DSP Automatic Digital Subject Program Selection can be temporarily disabled in the auto-recording menu. When disabled, the program exposure mode is active. If the position of the exposure mode dial is changed or the camera is turned off, Automatic Digital Subject Program Selection is activated.
57 This camera has autofocus and manual focus control. The focus mode must be activated separately in the Digital Subject Program and P , A, S, and M exposure-mode menus. The focus mode is activated in section 2 of the P , A, S, and M exposure-mode menu (p.
Preset white-balance settings must be set before the image is taken. Once set, the effect is immediately visible on the LCD monitor . Immediately after selecting the preset white- balance option on the menu, a selection screen is displayed. Press the left/right keys of the controller to select the preset white balance.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Konka Group Z1 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Konka Group Z1 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Konka Group Z1, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Konka Group Z1 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Konka Group Z1, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Konka Group Z1.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Konka Group Z1. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Konka Group Z1 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
