Manuel d'utilisation / d'entretien du produit Z6 du fabricant Konica Minolta
Aller à la page of 66
Printed in Germany 9979 2806 50/12984 Konica Minolta Customer Support: www .konicaminoltasupport.com Konica Minolta Photo World: www .konicaminoltaphotoworld.com Become a member of Konica Minolta Photo World today , free of charge, and enter the fascinating world of Konica Minolta photography .
2 3 Before you begin Thank you for purchasing this digital camera. Please take the time to r ead through this instruction manual so you can enjoy all the features of your new camera. Check the packing list befor e using this product. If any items ar e missing, immediately contact your camera dealer .
4 5 For proper and safe use • Keep batteries or small parts that could be swallowed away from infants. Contact a doctor imme- diately if an object is swallowed. • Store this pr oduct out of reach of children. Be careful when ar ound children not to harm them with the product or parts.
6 7 T ABLE OF CONTENTS The basic operation of this camera is covered between pages 12 and 33. This section of the manual covers the camera parts, preparation of the camera for use, and the basic camera operation for recor ding, viewing, and deleting images.
8 9 T able of contents Color mode..............................................................................................................................65 Contrast ................................................................................
11 10 Names of parts * This camera is a sophisticated optical instrument. Care should be taken to keep these surfaces clean. Please read the car e and storage instructions in the back of this manual (p. 122). Names of parts Shutter -release button Lens* Self-timer lamp (p.
13 12 Getting up and running GETTING UP AND RUNNING Inserting batteries Insert the batteries as indicated on the diagram on the inside of the bat- tery-chamber door .
14 15 Getting up and running Battery condition indicator Full-battery indicator - the battery is fully charged. This indicator is displayed for three seconds on the monitor when the camera is turned on. Low-battery indicator - battery power is low . The battery should be replaced as soon as possible.
Camera notes 16 17 Getting up and running Changing the memory card An SD Memory Card or MultiMediaCar d must be inserted for the camera to operate. If a card has not been inserted, a no-card warning is displayed on the monitor . For mor e about memory cards see page 126.
MM / DD / YYYY 0 : 0 18 19 Getting up and running Use the down key to highlight the language menu option. Press the central button to complete the operation. Use the left and right keys to select the item to be changed. Use the up and down keys to adjust the item.
20 21 Basic recor ding BASIC RECORDING While using the viewfinder or LCD monitor , grip the camera firmly with your right hand while supporting the body with your left. Keep your elbows at your side and your feet shoulder -width apart to hold the camera steadily .
23 22 Basic recor ding Press the shutter -release button all the way down to take the pic- ture. The example uses auto recor ding. Except for movie recording, the operation for other exposure modes is the same. Automatic Digital Subject Pr ogram Selection is only available in the auto recor ding mode.
25 Basic recor ding The focus signal in the lower right corner of the LCD monitor indicates the focus status. The shutter can be released even if the camera cannot focus on the subject. The camera may not be able to focus in certain situations. If the autofocus system cannot focus on a subject, the focus signal will turn red.
T o use the built-in flash, simply raise it (1). Lower the flash unit to prevent it fr om firing. Flash-mode indicator tur ns red while the flash is charging; wait until it becomes white befor e taking pictures. T o change the flash mode, raise the flash and press the flash mode button (2) until the appropriate mode is indicated.
The monitor image can be made lighter or darker . The brightness level can be set individually for viewfinder and direct viewing. T ur n the mode switch to the appropriate position. Pr ess and hold the information (i + ) button to open the LCD brightness screen.
Images can be viewed in the Quick View or playback modes. This section covers the basic operations in both modes. The playback mode has additional functions, see page 70. T o view images from the playback mode, turn the mode switch to the playback position (1).
With the image to be magnified displayed, slide the zoom lever to the right (T) to acti- vate the enlarged playback mode. The degree of magnification is displayed on the LCD monitor . Slide the zoom lever to the right (T) to increase the image magnification.
35 34 Advanced recor ding ADV ANCED RECORDING This section cover the advanced recor ding features of this camera. Read the basic recording sec- tion before moving on to this section. 3. Flash-mode indicator (p. 26) 7. White-balance indicator (p. 60) 8.
The shutter speed and aperture contr ol more than the exposure. The shutter speed deter- mines how sharp a moving subject is. The aperture contr ols the depth of field; the area in front of the camera that appears sharp. For mor e on exposure controls, see the Short Guide to Photography on page 129.
Manual exposure mode allows individual selection of shutter speeds and aper- tures. This mode overrides the exposur e system giving the photographer total con- trol over the final exposur e. 38 Advanced recor ding Use the up/down keys of the controller to change the shutter speed.
Exposure compensation is used when the camera’ s exposure meter is deceived by high-key or low-key scenes. In the example, the dark water caused the camera to overex- pose the image making it too bright and washed-out. By compensating the exposure, detail is br ought out in the leaves, and the stones and water appear richer .
When using an accessory flash, the camera uses pre-flash TTL metering to determine exposure. The flash modes available when using an optional flash unit varies with the exposure mode. Autoflash can only be used with auto, pr ogram (P), and Digital Subject Programs.
Focus mode Color mode Cont. AF NaturalColor 45 44 Advanced recor ding Press the central button of the contr oller to select the highlighted setting; some options open a selection screen.
The self-timer can be used to minimize camera shake with long exposures. When using the camera on a tripod, photographs of static subjects (landscapes, still-lifes, or close-up photographs) can be made with the self-timer . Because no contact is made with the cam- era during exposure, ther e is no risk of camera shake caused by the operator .
48 Advanced recor ding 49 The continuous-advance drive mode can capture images at a rate of appr oximately 1.8 fps. The maximum number of images that can be captured depends on the image file size and the available space on the memory card. When single-shot AF is used, focus and exposure is locked with the first frame.
51 50 Advanced recor ding Using progr essive capture The Progr essive-Capture drive mode continuously records images while holding down the shutter -release button. When the shutter button is released, the images stor ed in the camera’ s buffer memory are saved.
This mode makes a three-image bracket of a scene. Bracketing is a method of taking a series of images of a sta- tic subject in which each image has a slight variation in exposure.
The frame counter indicates the approximate number of images that can be stor ed on the memory card at the camera’ s image quality and size settings.
57 56 Advanced recor ding Auto DSP Automatic Digital Subject Program Selection can be temporarily disabled in the auto-recor ding menu. When disabled, the program exposure mode is active. If the camera is turned off, Automatic Digital Subject Program Selection is activated.
59 58 Advanced recor ding This camera has autofocus, and manual focus control. The focus mode is selected separately in the Digital Subject Program, movie, and P , A, S, and M exposur e-mode menus. When using Digital Subject Programs, the focus mode is r eset when the camera is tur ned off.
61 60 Advanced recor ding Preset white-balance settings must be set befor e the image is taken. Once set, the effect is immediately visi- ble on the LCD monitor . Immediately after selecting the preset white-balance option on the menu, a selection screen is displayed.
63 62 Advanced recor ding Full-time AF With full-time AF active, the autofocus systems continually focuses to keep the monitor image sharp. This also reduces the autofocusing time when taking pictur es. When the camera is set to manual focus, full-time AF is disabled.
65 64 Advanced recor ding ISO setting AUTO 50 0.2 - 3.6m (0.7 - 11.8ft.) Flash range (telephoto) 1.2 - 2.2m (3.9 - 7.2ft.) 0.2 - 2.0m (0.7 - 6.6ft.) 1.
Sensitivity Color mode Contrast Auto NaturalColor Normal Normal Sharpness Key func. Flash mode 67 66 Advanced recor ding Sharpness: hard Sharpness: soft Sharpness Sharpness accents or softens details in an image in three levels: hard (+), normal, and soft (–).
69 68 Advanced recor ding FRAME RA TE Movies can be recor ded at two frame rates: 15 fps and 30 fps. The higher the frame rate, the smoother the moving image and the larger the file sizes.
Play Rew Fwd Press the contr oller to pause the movie playback; press the contr oller again to resume the playback. 70 71 Advanced playback Use the left/right keys of the controller to display the movie. Press the center of the contr oller to play back the movie clip.
DPOF set Date print – Off – – E-mail copy Index print 73 72 Advanced playback Press the central button of the contr oller to select the highlighted setting. Use the left/right keys of the controller to highlight the appr opriate menu tab; the menu changes as the tabs are highlighted.
75 74 Advanced playback When a marked-frames setting is chosen on a menu, the frame selection screen appears. This screen allows multiple images to be chosen. The left/right keys of the controller moves the yellow border to select the image. The up key of the controller selects the frame; when selected, an indicator appears next to the image.
The formatting function is used to erase all data on a memory card. Befor e formatting a memory card, copy the data to a com- puter or storage device. Locking images will not protect them fr om being deleted when the card is formatted. Always format the mem- ory card using the camera; never use a computer to format a car d.
79 78 Advanced playback The edit-movie option in section 1 of the playback menu allows an unwanted section to be cut from a movie clip. The movie to be edited must first be displayed in the playback mode before open- ing the playback menu.
Delete Format – Edit movie Lock Copy 81 80 Advanced playback The copy function in section 1 of the playback menu (p. 72) makes exact copies of image or movie files and can store the copied data on another memory car d.
The presentation can be viewed without image information. Press the information (i + ) button to turn off the information dis- play . 83 82 Advanced playback Section 2 of the playback menu controls the slide-show function. This function automatically dis- plays all still images and movie clips on the memory card in or der .
DPOF files and images can be printed directly fr om the camera with a DPOF compatible PictBridge printer , see page 117. 85 84 Advanced playback The DPOF-set menu option is used to create an or der for standard prints from still images on the memory card.
LCDbrightness Power save Inst.Playback Language English None Off 1 min. – Lens acc. 86 87 Advanced playback The setup menu is used to control the camera’ s functions and operation. The navigating the setup menu section covers the operation of the menu.
LCDbrightness Power save Inst.Playback Language English None Off 1 min. – 89 88 Setup menu Press the central button of the contr oller to select the highlighted setting. Once a setting has been selected, the cursor will return to the menu options and the new setting will be displayed.
90 91 Setup menu Monitor brightness can be adjusted in 11 levels. Brightness can be set individually for viewfinder and direct viewing in the r ecording mode. T urn the mode switch to the appropriate position befor e opening the brightness option in section 1 of the setup menu (p.
93 92 Setup menu Language The language used in the menus can be changed in section 1 of the setup menu. See page 19 for details. If file number memory is selected, when a new folder is created or a new memory card is used, the next image r ecorded will have a file number one greater than the last file saved.
95 94 Setup menu Date imprinting The date is imprinted in the lower right corner of the image when viewed horizontally . It is printed directly on the photograph writing over the image information. The date can be imprinted in three for- mats: year / month / day , month / day / year , and day / month / year .
97 96 Setup menu p. 82 Playback (Slide Show) All frames p. 82 Duration (Slide Show) 5 seconds p. 82 Repeat (Slide Show) No Playback menu p. 97 V olume 2 p. 90 Auto-power -save period 1 minute p. 91 Lens accessory None p. 92 File number (#) memory Off p.
99 98 Setup menu Video output Camera images can be displayed on a television (p. 86). The video output can be changed between NTSC and P AL in section 4 of the setup menu. North America uses the NTSC standard and Eur ope uses the P AL standard. Check which standard is used in your region to play back images on your television set.
101 100 Data-transfer mode DA T A-TRANSFER MODE Read this section carefully befor e connecting the camera to a computer . This manual does not cover the basic operation of computers or their operating systems; please refer to the manual sup- plied with your computer .
102 103 Data-transfer mode When the USB connection is completed, a drive icon, or volume, appears in My Computer or the desktop; the name varies with memory card. When using Windows XP , a window opens r equesting instructions on what to do with the image data; follow the directions in the window .
104 105 Data-transfer mode Choose the recommended sear ch for a suitable driver . Click “Next.” Choose to specify the location of the driver . The br owse window can be used to indicate the driver location. The driver should be located in the CD-ROM drive at :Win98USB.
106 107 Data-transfer mode Once the camera is connected to the computer , image files can be accessed by double clicking on icons. Image folders are located in the DCIM folder . The misc. folder contains DPOF print files (p. 84). Files and folders on the memory card can be deleted using the computer .
108 109 Data-transfer mode Disconnecting the camera Windows Me, 2000 Professional, and XP Confirm that the access lamp is not lit. T urn off the camera and then disconnect the USB cable. If Kodak EasyShare is installed, right click on the EasyShar e icon on the task bar and quit the applica- tion before disconnecting the camera.
111 110 Data-transfer mode Changing the memory card Windows 98 and 98 Second Edition 1. T urn off the camera. 2. Change the memory card. 3. T urn on the camera to remake the USB connection. If Kodak EasyShare is installed, right click on the EasyShar e icon on the task bar and quit the appli- cation before disconnecting the camera.
Confirm the transfer -mode option in section 4 of the setup menu is set to PictBridge. Connect the camera to a PictBridge compatible printer using the camera’ s USB cable. The lar ger plug on the cable is con- nected to the printer . Open the A V out/ USB port cover and insert the smaller plug of the cable into the camera.
115 114 Data-transfer mode Navigating the PictBridge menu Press the central button of the contr oller to select the highlighted setting. Use the left/right keys of the controller to highlight the appr opriate menu tab; the menu changes as the tabs are highlighted.
The paper size of the print can be specified. Highlight the current page size and pr ess the central button of the controller to open paper -size screen. Use the contr oller to select the paper size, and press the central button to complete the operation.
119 118 Data-transfer mode The all-in-one digital photography software solution gives you an ef fortless way to organize, print, and share your pictur es. Organize your pictures Kodak EasyShare softwar e automatically organizes your pictures so you can find and view them quickly .
121 120 Data-transfer mode DiMAGE Master Lite is your entrance into digital imaging. Image-processing tools Color , contrast, saturation, and sharpness can be optimized to bring out the best in your images. Advanced RAW image pr ocessing for specific model DiMAGE cameras ensures high-quality results.
122 123 Appendix Problem Symptom Cause Solution The camera will not work. Nothing dis- played on the monitors. The batteries are dead. Replace batteries (p. 13). The section covers minor problems with basic camera operation. For major pr oblems or damage, or if a problem continues to r eoccur frequently , contact a Konica Minolta service facility .
124 125 Appendix Read this section in its entirety to get the best r esults from your camera. With proper care, your camera will provide years of service. Camera care • Do not subject the camera to shock or impact. • T ur n off the camera when transporting.
126 127 Appendix Memory cards SD Memory Cards and MultiMediaCar ds are manufactured with precision electr onic components. The following may cause data loss or damage: • Improper use of the car d. • Bending, dropping, or subjecting the car d to impact.
FCC Compliance Statement Declaration on Conformity Responsible Party: Konica Minolta Photo Imaging U.S.A. Inc. Address: 725 Darlington A venue, Mahwah, NJ 07430 This device complies with Part 15 of the FCC Rules.
130 131 Appendix A V output: NTSC and P AL Batteries: Four AA alkaline or Ni-MH batteries. Battery performance (recor ding): Approximate number of r ecorded images: 240 frames with alkaline batteries, 420 frames with 2500mAh Ni-MH batter- ies, conforming to the CIP A standard with SD Memory Car d.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Konica Minolta Z6 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Konica Minolta Z6 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Konica Minolta Z6, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Konica Minolta Z6 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Konica Minolta Z6, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Konica Minolta Z6.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Konica Minolta Z6. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Konica Minolta Z6 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
