Manuel d'utilisation / d'entretien du produit DCS 465 du fabricant Kodak
Aller à la page of 398
2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii W ARRANTY KODAK Professional DCS 465 Digital Camera Back THIS WARRANTY APPLIES TO EQUIPMENT PURCHASED IN THE UNITED STATES.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . iv Limitations Warranty service will not be provided without return of the Warranty Registration card or dated proof of purchase. Please return the Warranty Registration card within 30 days of purchase.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . v Outside the United States In countries other than the United States, the terms of this warranty may be different.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi EASTMAN KODAK COMP ANY Software License Agreement YOU SHOULD CAREFULLY READ THE FOLLOWING TERMS AND CONDITIONS BEFORE OPENING THE DISKETTE PACKAGE(S). OPENING THE DISKETTE PACKAGE(S) INDICATES YOUR ACCEPTANCE OF THESE TERMS AND CONDI- TIONS.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii You must reproduce and include the copyright notice on any copy of the software. YOU MAY NOT USE, COPY OR TRANSFER THE SOFTWARE, OR ANY COPY, IN WHOLE OR IN PART, EXCEPT AS EXPRESSLY PROVIDED FOR IN THIS LICENSE.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO QUALITY AND PERFORMANCE OF THE SOFTWARE IS WITH YOU. IF THE SOFTWARE PROVES DEFECTIVE, YOU (AND NOT KODAK OR YOUR DEALER) ASSUME THE ENTIRE COST OF ALL NECESSARY SERVICING, REPAIR, OR CORRECTION.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix GENERAL You may not sublicense, assign, or transfer the license or the software, except as expressly provided in this Agreement. Any attempt otherwise to sublicense, assign, or transfer any of the rights, duties, or obligations hereunder is prohibited.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . x Important Safeguards and Precautions The exclamation point in an equilateral triangle is in- tended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the equipment.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi and serious damage to the equipment. Use only with a stable cart, stand, bracket, or table.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . xii will use the DCS 465 Camera Back as the only external device attached to a Macintosh IIfx or PowerBook computer (refer to chapter 4). Use only the SCSI cables supplied with the DCS 465 Camera Back to attach the camera back or other peripherals to the computer.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii PCMCIA cards to normalize within the specified environmental ranges before operation. (Third-party, optional PCMCIA cards may have more restrictive operating temperature and humidity ranges.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiv You can connect the camera back to a computer with or without a PCMCIA card in the camera back.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . xv AC Battery Charger/Adapter — Important W arnings You should operate the equipment only from the type of power source indicated on the name plate of the AC battery charger/adapter. A line voltage outside of this range can destroy the AC battery charger/ adapter and/or the camera back.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . xvi Electromagnetic Emissions This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfer- ence in a residential installation.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . xvii Assistance Needed Source of Assistance You encounter difficulties with hardware, images, or product performance. Refer to the troubleshooting sections of this manual: camera back (in chapter 9), Photoshop Macintosh driver (in chapter 10), and TWAIN (PC) driver (in chapter 11).
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . xviii Contents 1 1 1 1 1 Before You Begin 1-1 Macintosh Computer — Hardware and Software 1-2 Required Computer Hardware 1-2 Required Monitor.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . xix 4 4 4 4 4 Preparing the DCS 465 Camera Back for Use with Your Macintosh Computer 4-1 Connecting the DCS 465 Camera Back to Your Camera 4-3.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . xx 5 5 5 5 5 Preparing the DCS 465 Camera Back for Use with Your PC (continued) Making the SCSI Connection 5-19 DCS 465 Camera Back as the Sol.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxi Recording Sound (Optional) 6-10 Awake/Sleep Modes 6-12 Operating Differences with Your Camera 6-13 7 7 7 7 7 Accessing DCS 465 Camera Back.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxii 8 8 8 8 8 Accessing DCS 465 Camera Back Images from a PC 8-1 Accessing the DCS 465 Camera Back from the Driver 8-3 Viewing Images with th.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxiii Liquid Crystal Display (LCD) 9-4 Battery Indicator 9-5 Image Numbering Systems 9-6 Frames Remaining Indicator 9-6 Image Reference Number.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxiv 9 9 9 9 9 Reference — DCS 465 Camera Back (continued) Recorded Sound 9-26 How to Record Sound 9-27 Recording “Lengthy” Audio Segmen.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxv Select 10-12 All Images 10-12 Last Image 10-13 None 10-13 Action 10-13 Acquire 10-13 Copy to Folder… 10-14 Move to Folder… 10-14 Delet.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxvi 11 11 11 11 11 Reference — Kodak Drivers for TWAIN-Compliant PC Applications (continued) Action 11-12 Acquire 11-12 Copy to Folder… 1.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Before You Begin 1-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Before You Begin Macintosh Computer — Hardware and Software The following sections list the required and optional computer hardware and software needed to run the Kodak Driver for use with Adobe Photo- shop Software on an Apple Macintosh computer.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Before You Begin 1-3 Required Monitor and Display Card A color monitor is required for color work. Your monitor should be at least 12 inches or larger; the monitor on a PowerBook is also acceptable.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4 Before You Begin IBM PC or Compatible Computer — Hardware and Software These sections list required and optional hardware and software needed to run the Kodak Driver for TWAIN-compliant PC applications.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Before You Begin 1-5 Required SCSI Interface ASPI (Advanced SCSI Programming Interface) Windows host adapter such as those from Adaptec, Inc. running EZ-SCSI 3.0 or later. or SCSI Host Adapter for PCs with AT-style bus (Future Domain No.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6 Before You Begin Optional Hardware/Software for Playing Recorded Sound A hardware sound board is required if you want to play the “.WAV” files you can record with the microphone in the camera.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Before You Begin 1-7 Optional Printers NOTE: In the United States, contact Kodak at 1-800-23-KODAK (1-800-235- 6325) for detailed information .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8 Before You Begin Optional DCS 465 Camera Back Equipment Kodak accessories, for example, PCMCIA cards. Refer to the appendix “Optional Equipment & Spare Parts List” for specific details.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Introduction 2-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2 Introduction The KODAK Professional DCS 465 Digital Camera Back (DCS 465 Camera Back) is a portable unit that allows you to capture and store high- resolution digital images when using your own supported medium-format camera.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Introduction 2-3 Features The DCS 465 Camera Back, a sealed one-piece unit, incorporates the following features: Camera Sync (4-pin) Elec Cam .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4 Introduction ISO SCSI ID CARD BUSY Remove/insert PCMCIA card here. Door slides up/down. Multipurpose connector SCSI port Record button Mic.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Introduction 2-5 Two controls — one sets the camera back SCSI ID; the other sets the ISO. A built-in microphone records sound as “.WAV” files at “radio qual- ity”— 8-bits, 11 kilohertz, monaural.
.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Quick Start 3-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2 Quick Start 1. Obtain one or more supported PCMCIA cards. PCMCIA cards are not supplied with the camera back, but are avail- able from Kodak (and elsewhere). The camera back accepts cards that support the PCMCIA “ATA interface.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Quick Start 3-3 b. Load the diskette “KODAK DCS 465 Calibration (CAL) File: Macintosh.” The diskette contains a calibration file whose filename is your camera back serial number followed by a “.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4 Quick Start 5. Remove the imager cover from the camera back by inserting your thumb beneath a corner of the cover and separating it from the camera back.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Quick Start 3-5 6. Mount the camera back to your camera as shown below for a typical configuration.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6 Quick Start 7. Make the appropriate cable connections; follow step A for mechani- cally tripped cameras, and step B for electrically tripped cameras.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Quick Start 3-7 B. Electrically tripped camera. Optional: Connect flash sync cable here. Electronic camera trip cable (Plug this end into camera body.) Shutter release cable Camera sync cable (Plug this end into the body or lens.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8 Quick Start 8. Attach the supplied AC battery charger/adapter. Connect the adapter to a source supplying power within the range on its label, and to the connector on the lower left corner of the camera back.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Quick Start 3-9 12. Update the camera back firmware. This onetime action ensures that the most current control commands (firmware) are loaded in the camera back. A. Macintosh Run Photoshop, choose F ILE , A CQUIRE , KODAK DCS 465.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-10 Quick Start 15. (Optional) Record sound. Hold the back of the camera back about six inches from your mouth (the microphone is behind four small holes centered at the top of the camera back).
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparing for Use with Mac 4-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2 Preparing for Use with Mac Install the driver for Adobe Photoshop Software and the camera back calibration file (CAL) on your Macintosh computer. Insert (and remove) your PCMCIA card into the DCS 465 Camera Back.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparing for Use with Mac 4-3 Connecting the DCS 465 Camera Back to Y our Camera Follow the steps in this section to connect the DCS 465 Camera Back to your camera. CAUTION: As you complete these steps handle the camera back — and especially the imager – with extreme caution.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4 Preparing for Use with Mac 2. Mount the camera back to your camera as shown below for a typical configuration; first mount the adapter to your camera, and then mount the camera back to the adapter.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparing for Use with Mac 4-5 A. Mechanically tripped camera. CAUTION: To simplify making these connections, each cable has unique connectors at both ends. Cables can only be plugged into one connector.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6 Preparing for Use with Mac B. Electrically tripped camera. CAUTION: To simplify making these connections, each cable has unique connectors at both ends. Cables can only be plugged into one connector.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparing for Use with Mac 4-7 Using the AC Battery Charger/ Adapter Keep the following battery considerations in mind as you use the camera back. IMPORTANT : Do not attempt to remove the battery; it is not a cus- tomer serviceable part.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8 Preparing for Use with Mac Follow these steps to charge the battery. 1. Locate the AC battery charger/adapter and power cord supplied with the camera back. To camera back AC BATTERY CHARGER/ADAPTER POWER CORD To wall outlet To AC battery charger/adapter 2.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparing for Use with Mac 4-9 4. Plug the AC battery charger/adapter into the DCS 465 Camera Back as shown below. 5. The first time the camera back is used, allow the battery to charge for at least one hour.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-10 Preparing for Use with Mac IMPORTANT: An LCD at the top left corner of the camera back displays a battery icon.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparing for Use with Mac 4-11 6. (Optional) Use the supplied accessory adapter cable as shown in the following illustration. Doing so allows simultaneous use of the AC battery charger/adapter and other accessories as available (refer to Appendix D for ordering information).
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-12 Preparing for Use with Mac Setting the SCSI ID on the DCS 465 Camera Back In this section you will set the SCSI identification (ID) number for the DCS 465 Camera Back. Each SCSI device connected to the same computer must have a different ID number.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparing for Use with Mac 4-13 3. Wake (see illustration below) the DCS 465 Camera Back using one or the other of these two methods. A. Operate while connected to the AC battery charger/adapter; the camera back is continually awake in this state.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-14 Preparing for Use with Mac 4. Locate the indented button on the back of the DCS 465 Camera Back labeled “SCSI ID.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparing for Use with Mac 4-15 5. Press the SCSI ID button once with your fingertip or other blunt object; this action wakes SCSI mode. The characters “SCSI” (called the SCSI indicator), as well as a single value from 0 to 7, “PC,” and “PP” appear on the camera back LCD.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-16 Preparing for Use with Mac 6. While “SCSI” still appears on the LCD, you change the current SCSI ID by pressing the SCSI ID button repeatedly. The ID rotates through the values 0 to 7, “PC,” and “PP.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparing for Use with Mac 4-17 Making the SCSI Connection NOTE: Leave the camera back connected to your camera while you make this connection. Refer to chapter 9 for an explanation of supported configurations.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-18 Preparing for Use with Mac Two sets of instructions follow, depending on whether or not other external SCSI devices are connected to your computer. NOTE: You may need to obtain a SCSI terminator to complete these steps if other external SCSI devices are connected to your computer.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparing for Use with Mac 4-19 3. Connect the AC battery charger/adapter to the camera back as de- scribed earlier in this chapter. Although this step is optional, we recommend it whenever the camera back is connected to a computer.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-20 Preparing for Use with Mac 6. Attach the appropriate end of the supplied 25-pin SCSI terminator to the open 25-pin end of the SCSI cable you just attached to your Macintosh computer. 25-pin Terminator BACK OF MACINTOSH COMPUTER 7.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparing for Use with Mac 4-21 8. (Optional) Later, to disconnect the camera back from the Macintosh computer, shut down the computer. Then disconnect the terminator from the camera back. Disconnect the SCSI cable from the Macintosh computer.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-22 Preparing for Use with Mac 1. Turn off the Macintosh PowerBook computer. IMPORTANT: Later when you connect and disconnect the Macintosh PowerBook computer and the DCS 465 Camera Back on a regular basis, make sure the computer is off.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparing for Use with Mac 4-23 Skip the next sections and continue at “Installing the KODAK Driver for Adobe Photoshop Software (Macintosh) and Calibration File” later in this chapter.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-24 Preparing for Use with Mac Follow the steps below to complete this connection. SCSI Connector BACK OF MACINTOSH IIfx COMPUTER 25-pin Connector 56 7 8 4 1. Turn off the Macintosh IIfx computer.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparing for Use with Mac 4-25 4. Attach the 25-pin connector of the 25-pin to 50-pin SCSI cable that you have supplied to the SCSI port on the back of the Macintosh IIfx computer.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-26 Preparing for Use with Mac Multiple SCSI devices are connected to the Macintosh computer in a chain.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparing for Use with Mac 4-27 2. Place the DCS 465 Camera Back in a convenient position next to the last device in the SCSI chain of devices connected to your Macintosh computer. 3. Connect the AC battery charger/adapter to the camera back as de- scribed earlier in this chapter.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-28 Preparing for Use with Mac A. If there is an external SCSI terminator on an otherwise empty SCSI connector on the last device, remove it.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparing for Use with Mac 4-29 6. Connect the 50-pin connector to the empty connector on the last SCSI device in the chain. Make sure the connector is well seated by press- ing it into place firmly, and then pinch the thin wire clamps over its base.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-30 Preparing for Use with Mac 8. (Optional) Later, to disconnect the camera back from the Macintosh computer, shut down the computer and all external SCSI devices. Then restore the SCSI cables and terminator to the state they were in before the camera back was connected.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparing for Use with Mac 4-31 4. Select the SCSI cable with the 50-pin connector at one end and the 25-pin connector at the other end. IMPORTANT: Use only the cable supplied with the DCS 465 Camera Back; do not use a substitute cable.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-32 Preparing for Use with Mac 6. Attach the other end of the SCSI cable to the SCSI connector on the DCS 465 Camera Back. 25-pin Connector SCSI Connector 7. (Optional) Later, to disconnect the camera back from the Macintosh computer, shut down the computer and all external SCSI devices.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparing for Use with Mac 4-33 Installing the KODAK Driver for Adobe Photoshop Software (Macintosh) and the Calibration File NOTE: We assume that you are familiar with Adobe Photoshop; if you are not, refer to the instruction manuals that accompany that product.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-34 Preparing for Use with Mac 3. If the diskettes are not locked, lock them by sliding their tabs on the back to reveal a small hole. This will prevent the contents of the disk from being changed inadvertently, and may aid in preventing the spread of computer viruses to this diskette.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparing for Use with Mac 4-35 B. Follow directions in the Photoshop manual regarding placement of plug-in modules. For example, with Photoshop version 2.5 and 3.0, drag the KODAK DCS 465 and any and all DCS465.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-36 Preparing for Use with Mac Inserting and Removing a PCMCIA Card This section describes how to insert and remove a PCMCIA card. PCMCIA cards are not supplied with the camera back, but are available as optional equipment.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparing for Use with Mac 4-37 1. Be certain that the red “Card Busy” light is not blinking before you continue.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-38 Preparing for Use with Mac 2. While looking at the camera back, open the door on the left edge by sliding the door up. ISO SCSI ID CARD BUSY . . . insert/remove PCMCIA card here. Slide door up, then .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparing for Use with Mac 4-39 Insert your PCMCIA card (not supplied with the camera back), by sliding it — thin edge first — into the empty slot, and pushing it firmly into place.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-40 Preparing for Use with Mac 4. Slide the door down over the PCMCIA card compartment. NOTE: The camera back LCD (see the first figure in the previous step) may show “E6,” a code indicating that the PCMCIA card is not formatted.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparing for Use with Mac 4-41 3. CAUTION : As you complete this step, the PCMCIA card is ejected from the camera back; for that reason, keep your hand in front of the door opening to prevent the fragile card from falling out of the camera back.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-42 Preparing for Use with Mac Accessing the KODAK Driver for Adobe Photoshop Software (Macintosh) Repeat the steps below each time you want to access the KODAK Driver for Adobe Photoshop software.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparing for Use with Mac 4-43 5. Pull down the Adobe Photoshop F ILE menu and choose KODAK DCS 465 from the A CQUIRE submenu.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-44 Preparing for Use with Mac 6. Wait as the image window appears. (The first time you choose this driver, a file named DCS 465 P REFER - ENCES is created in your S YSTEM F OLDER .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparing for Use with Mac 4-45 Updating DCS 465 Camera Back Firmware The DCS 465 Camera Back incorporates nonvolatile memory that con- tains controls — called firmware — for most features of the camera back.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-46 Preparing for Use with Mac 1. Click the C ONTROL P ANEL button of the driver image window. You will see the dialog box below. 2. Click the U PDATE C AMERA F IRMWARE button. 3. Wait while firmware is copied to the camera back.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparing for Use with Mac 4-47 Formatting a PCMCIA Card This section describes how to format a PCMCIA card, an action you should take now as .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-48 Preparing for Use with Mac 1. Click the C ONTROL P ANEL button of the image window. You will see the dialog box below. 2. IMPORTANT: As you complete this step, keep in mind that this operation will erase all existing data on the PCMCIA card.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparing for Use with Mac 4-49 Quitting — Disconnecting the DCS 465 Camera Back from the Computer Complete these steps when you have completed your work with the DCS 465 Camera Back and the Macintosh computer.
.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparing for Use with PC 5-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2 Preparing for Use with PC Install the driver for TWAIN-compliant PC applications and the camera back calibration (CAL) file on your PC. Insert (and remove) your PCMCIA card into the DCS 465 Camera Back.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparing for Use with PC 5-3 Connecting the DCS 465 Camera Back to Y our Computer Follow the steps in this section to connect the DCS 465 Camera Back to your camera. CAUTION: As you complete these steps handle the camera back — and especially the imager – with extreme caution.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4 Preparing for Use with PC 2. Mount the camera back to your camera as shown below for a typical configuration; first mount the adapter to your camera, and then mount the camera back to the adapter.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparing for Use with PC 5-5 A. Mechanically tripped camera. CAUTION: To simplify making these connections, each cable has unique connectors at both ends. Cables can only be plugged into one connector.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6 Preparing for Use with PC B. Electrically tripped camera. CAUTION: To simplify making these connections, each cable has unique connectors at both ends. Cables can only be plugged into one connector.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparing for Use with PC 5-7 Using the AC Battery Charger/ Adapter Keep the following battery considerations in mind as you use the camera back. IMPORTANT : Do not attempt to remove the battery; it is not a cus- tomer serviceable part.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-8 Preparing for Use with PC Follow these steps to charge the battery. 1. Locate the AC battery charger/adapter and power cord supplied with the camera back. To camera back AC BATTERY CHARGER/ADAPTER POWER CORD To wall outlet To AC battery charger/adapter 2.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparing for Use with PC 5-9 4. Plug the AC battery charger/adapter into the DCS 465 Camera Back as shown below. 5. The first time the camera back is used, allow the battery to charge for at least one hour.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-10 Preparing for Use with PC IMPORTANT: An LCD at the top left corner of the camera back displays a battery icon.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparing for Use with PC 5-11 6. (Optional) Use the supplied accessory adapter cable as shown in the following illustration. Doing so allows simultaneous use of the AC battery charger/adapter and other accessories as available (refer to Appendix D for ordering information.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-12 Preparing for Use with PC Setting the SCSI ID on the DCS 465 Camera Back In this section you will set the SCSI identification (ID) number for the DCS 465 Camera Back. Each SCSI device connected to the same computer must have a different ID number.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparing for Use with PC 5-13 3. Wake (see illustration below) the DCS 465 Camera Back using one or the other of these two methods. A. Operate while connected to the AC battery charger/adapter; the camera back is continually awake in this state.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-14 Preparing for Use with PC 4. Locate the indented button on the back of the DCS 465 Camera Back labeled “SCSI ID.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparing for Use with PC 5-15 5. Press the SCSI ID button once with your fingertip or other blunt object; this action wakes SCSI mode. The characters “SCSI” (called the SCSI indicator), as well as a single value from 0 to 7, “PC,” and “PP” appear on the camera back LCD.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-16 Preparing for Use with PC 6. While “SCSI” still appears on the LCD, you change the current SCSI ID by pressing the SCSI ID button repeatedly. The ID rotates through the values 0 to 7, “PC,” and “PP.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparing for Use with PC 5-17 Installing a SCSI Host Adapter The DCS 465 Camera Back connects to your PC at a SCSI port provided by installing one of the supported SCSI host adapter cards described in chapter 1.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-18 Preparing for Use with PC 3. Install the SCSI Host Adapter card for your PC according to the manufacturer’s installation instructions. When installation is complete, a SCSI2 connector should be available on the back of your PC, as shown in one example below.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparing for Use with PC 5-19 Making the SCSI Connection The DCS 465 Camera Back is a non-terminated SCSI device that connects to your PC at a SCSI2 connection on your PC.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-20 Preparing for Use with PC 5. Attach the 50-pin SCSI2 connector to the SCSI2 port on the back of the PC. Make sure the cable connector is well seated by pressing it into place firmly, so that the spring-clips on the connector snap onto the SCSI port.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparing for Use with PC 5-21 7. Attach the other end of the cable (25-pin SCSI connector) to the SCSI port on the DCS 465 Camera Back. SCSI Port 8. (Optional) Later, to disconnect the camera back from the PC, shut down the PC.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-22 Preparing for Use with PC Multiple SCSI devices are connected to a PC in a chain. If the DCS 465 Camera Back is one of multiple SCSI devices connected to your com- puter, it must be connected as the last device in the chain of SCSI devices since it only includes one SCSI connector.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparing for Use with PC 5-23 3. Connect the AC battery charger/adapter to the camera back as de- scribed earlier in this chapter. Although this step is optional, we recommend it whenever the camera back is connected to a computer.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-24 Preparing for Use with PC 5. Select the SCSI cable with the 50-pin connector at one end and the 25-pin connector at the other end. IMPORTANT: Use only the cable supplied with the DCS 465 Camera Back; do not use a substitute cable.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparing for Use with PC 5-25 7. Attach the supplied 25-pin terminator to the other end of the SCSI cable and then to the DCS 465 Camera Back.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-26 Preparing for Use with PC B. Follow these steps if the last connected device is terminated internally.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparing for Use with PC 5-27 5. Connect the 50-pin connector to the empty SCSI connector of the device that is terminated internally. Make sure the connector is well seated by pressing it into place firmly, and then pinch the thin wire clamps over its base.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-28 Preparing for Use with PC 7. (Optional) Later, to disconnect the camera back from the PC, turn off the computer and all external SCSI devices. Then restore the SCSI cables and terminator to the state they were in before the camera back was connected.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparing for Use with PC 5-29 KODAK Drivers for TW AIN-Compliant PC Applications Introduction This section documents how to install the KODAK Drivers for TWAIN- compliant PC applications as well as a calibration file for your camera back.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-30 Preparing for Use with PC You can install and use the TWAIN-compliant driver for use with ASPI (Advanced SCSI Programming Interface) host adapter card such as those available from Adaptec, Inc.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparing for Use with PC 5-31 Installing TW AIN-compliant KODAK Driver(s) and the Calibration File NOTES: We assume that a technician has installed a supported SCSI host adapter card in your PC.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-32 Preparing for Use with PC Places a set of files within the “DCS4XX” subdirectory. Overwrites any existing DCS drivers already in the directory. This driver processes images from other KODAK DCS cameras (except for the DCS 100 or 200.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparing for Use with PC 5-33 D. Wait as the initial screen and then the welcome screen appear. E. Read the welcome screen and then click C ONTINUE . 5. When you see the DCS 465 TWAIN DRIVER INSTALL screen, follow these steps.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-34 Preparing for Use with PC Installing The Calibration (CAL) File Follow these steps to install the calibration file for use with the DCS 465 Camera Back. 1. Start Microsoft Windows and make sure that you are in the Program Manager.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparing for Use with PC 5-35 5. You see the DCS46 X C ALIBRATION F ILE INSTALLER screen; follow these steps. A. Click I NSTALL ; wait as a box indicates progress in completing the installation.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-36 Preparing for Use with PC Inserting (and Removing) a PCMCIA Card into the DCS 465 Camera Back This section describes how to insert (and remove) a PCMCIA card into the camera back. PCMCIA cards are not supplied with the camera back, but are available as optional equipment.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparing for Use with PC 5-37 1. Be certain that the red “Card Busy” light is not blinking before you continue.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-38 Preparing for Use with PC 2. While looking at the camera back, open the door on the left edge of the camera back by sliding the door up. ISO SCSI ID CARD BUSY . . . insert/remove PCMCIA card here.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparing for Use with PC 5-39 Slide your PCMCIA card (not supplied with the camera back) — thin edge first — into the empty slot, and push it firmly into place.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-40 Preparing for Use with PC 4. Slide the door down over the PCMCIA card compartment. NOTE: The camera back LCD (see the first figure in the previous step) may show “E6,” a code indicating that the PCMCIA card is not formatted.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparing for Use with PC 5-41 3. CAUTION : As you complete this step, the PCMCIA card is ejected from the camera back; for that reason, keep your hand in front of the door opening to prevent the fragile card from falling out of the camera back.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-42 Preparing for Use with PC Accessing a KODAK Driver for TW AIN-compliant PC Applications Repeat the steps below each time you want to access the KODAK Driver for TWAIN-Compliant PC Applications.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparing for Use with PC 5-43 Read the example for the software you use. If your software is not in- cluded, refer to its documentation to determine if it is TWAIN-compliant, and if it is, how it provides access to TWAIN drivers.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-44 Preparing for Use with PC 4. Click S ELECT ; you are returned to Photoshop. NOTE: The choice of source, and other settings you establish .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparing for Use with PC 5-45 6. Wait as the driver image window appears, then continue at “Updating Firmware in the DCS 465 Camera Back.” That section begins by showing the driver image window.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-46 Preparing for Use with PC Example 4: Micrografx Picture Publisher 4.0 and 5.0 Once you have installed the TWAIN driver(s) as described earlier in this chapter, and are in Windows, you access the driver by following these steps.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparing for Use with PC 5-47 Example 5: Media Cybernetics HALO Desktop Imager 2.01.H Once you have installed the TWAIN driver(s) as described earlier in this chapter, and are in Windows, you access the driver by following these steps.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-48 Preparing for Use with PC Updating Firmware in the DCS 465 Camera Back The DCS 465 Camera Back incorporates nonvolatile memory that con- tains controls — called firmware — for most features of the camera back.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparing for Use with PC 5-49 You should now be viewing the driver image window below..
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-50 Preparing for Use with PC NOTE: Instead of the driver image window you may see a message indicating that the camera back was not found. If you do, follow the troubleshooting suggestions in the message.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparing for Use with PC 5-51 Formatting a PCMCIA Card This section describes how to format a PCMCIA card, an action you should take now as y.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-52 Preparing for Use with PC 2. IMPORTANT: As you complete this step, keep in mind that this operation will erase all existing data on the PCMCIA card.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparing for Use with PC 5-53 Quitting — Disconnecting the Camera Back from the Computer Complete these steps when you have completed your work with the DCS 465 Camera Back and the PC. 1. If your application is running, quit it now.
.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Using the DCS 465 Camera Back 6-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2 Using the DCS 465 Camera Back Readying the DCS 465 Camera Back 1. If the DCS 465 Camera Back is not connected to your camera, connect it now as described in chapters 4 (Macintosh) or 5 (PC).
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Using the DCS 465 Camera Back 6-3 3. Select either step A or B below depending on the environment in which you will use the camera back.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-4 Using the DCS 465 Camera Back A. Mechanically tripped camera. Press the record button on the camera back. (The camera back sleeps again in five seconds; reawaken it, if needed, by pressing the record button again.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Using the DCS 465 Camera Back 6-5 LCD CAMERA-ASLEEP GRAPHICS When not connected to a computer or the AC adapter, the camera back automatically turns off after approximately five seconds to save the battery.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-6 Using the DCS 465 Camera Back 6. With the camera back awake, check the battery indicator on the LCD. If the segments are lighting in turn from bottom to top, the battery is being charged by the attached AC battery charger/adapter; you can operate the camera back normally in this state.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Using the DCS 465 Camera Back 6-7 2. Locate the indented button on the back of the DCS 465 Camera Back labeled “ISO.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-8 Using the DCS 465 Camera Back 3. Press the ISO button once with your fingertip or other blunt object; this action wakes ISO mode. The characters “ISO” appear on the camera back LCD as does the current ISO.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Using the DCS 465 Camera Back 6-9 B. Electrically tripped cameras. You do not need to wake the camera back. Instead, after winding the film winder (if necessary), press and hold the shutter release cable button for one-quarter second or more.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-10 Using the DCS 465 Camera Back The oval at the right of the LCD indicates the amount of the PCMCIA card filled with images. As more pictures are taken, subsequent sectors of this graphic appear.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Using the DCS 465 Camera Back 6-11 2. Press and hold the Record button. (If the camera back is not awake, pressing the Record button will wake it.) ISO SCSI ID CARD BUSY Record button Microphone Card Busy light 3.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-12 Using the DCS 465 Camera Back played on audio equipment like tape decks). The bouncing segments provide a visual indication that sound is being recorded. The best quality recording should occur when 4-5 segments are on.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Using the DCS 465 Camera Back 6-13 Operating Differences with Y our Camera There are differences between normal operation of your camera and i.
.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Accessing Images from a Mac 7-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2 Accessing Images from a Mac The DCS 465 Camera Back is designed to be used in the field or while connected to your computer. While connected, you can use the camera back and the Macintosh computer in conjunction with each other, or you can use either independently of the other.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Accessing Images from a Mac 7-3 Accessing the DCS 465 Camera Back from the Driver Repeat the steps below each time you want to access the camera back from the Kodak Driver for Adobe Photoshop Software.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-4 Accessing Images from a Mac 8. Pull down the Adobe Photoshop F ILE menu and choose KODAK DCS 465 from the A CQUIRE submenu. NOTE: O PEN from the Adobe Photoshop F ILE menu will not acquire images from the DCS 465 Camera Back.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Accessing Images from a Mac 7-5 9. Wait as the driver image window appears. NOTES: If a single large image appears, click the P REVIEW choice “off” to replace that larger preview image with the smaller images.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-6 Accessing Images from a Mac NOTES: Instead of the driver image window above you may see a message indicating that the camera back was not found. If you do, follow the trouble- shooting suggestions in the message.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Accessing Images from a Mac 7-7 V iewing Images with the KODAK Driver for Adobe Photoshop Software The driver image window displays thumbnails of images from the DCS 465 Camera Back PCMCIA card.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-8 Accessing Images from a Mac 2. (Optional) Click once on the small square “I NFO ” box beneath the lower right corner of an image; an information box opens at the right of the driver image window.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Accessing Images from a Mac 7-9 The information box displays data about the status of the camera back when the image was taken.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-10 Accessing Images from a Mac 5. (Optional) Click on P REVIEW . You see a single, enlarged version of the image. The preview image appears in color (if it was taken with a color model of the camera back and if you have a color monitor).
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Accessing Images from a Mac 7-11 Selecting the Color Balance for an Image(s) NOTE: The information in this section applies only to color images. In the following steps you will select an option to correspond to the original lighting conditions under which you took the picture.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-12 Accessing Images from a Mac The DAY, TUNG, FLUOR, or FLASH choices correspond to daylight, tungsten, fluorescent, or flash lighting conditions.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Accessing Images from a Mac 7-13 Acquiring Images with the KODAK Driver for Adobe Photoshop You are now ready to acquire an image into Photoshop. Acquiring an image copies its image data from the PCMCIA card into Photoshop, where the acquired image opens into a Photoshop window.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-14 Accessing Images from a Mac 5. (Optional) Repeat the steps of the last several sections and acquire and save additional images.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Accessing Images from a Mac 7-15 Playing Recorded Sound Files Sound files that you have recorded when using the camera back are saved to the PCMCIA card as described in chapter 6.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-16 Accessing Images from a Mac When you click on the icon, if a single sound file was recorded, it is played through the Macintosh computer speaker.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Accessing Images from a Mac 7-17 Using Other Features of the KODAK Driver for Adobe Photoshop Software The driver provides a variety of additional features that allow you to work with image and sound files on the DCS 465 Camera Back PCMCIA card and on the Macintosh hard disk.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-18 Accessing Images from a Mac C OPY TO F OLDER Button Copies “selected” image files and recorded associated sound data from the PCMCIA card to the Macintosh hard disk. Each image and each sound becomes a separate file in a folder on the Macintosh computer.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Accessing Images from a Mac 7-19 C HANGE F OLDER Button Closes the current folder whose images are displayed in the driver image window, and r.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-20 Accessing Images from a Mac Creating Monochrome Images with Your Color DCS 465 Camera Back You can use Adobe Photoshop to create monochrome images from color images taken with a color camera back.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Accessing Images from a Mac 7-21 If you transport your images to another computer system (perhaps you are distributing unacquired images to ot.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-22 Accessing Images from a Mac Quitting Complete these steps when you have completed your work with the DCS 465 Camera Back and the Macintosh computer.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Accessing Images from a PC 8-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-2 Accessing Images from a PC The DCS 465 Camera Back is designed to be used in the field or while connected to your computer. While connected, you can use the camera back and the PC in conjunction with each other, or you can use either independently of the other.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Accessing Images from a PC 8-3 Accessing the DCS 465 Camera Back from the Driver Repeat the steps below each time you want to access the driver. 1. If the DCS 465 Camera Back and your PC are not connected, turn the computer off and connect them now by following the directions in chapter 5.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-4 Accessing Images from a PC 6. If one is not present, insert a PCMCIA card into the camera back.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Accessing Images from a PC 8-5 9. Wait as the driver image window appears. NOTES: If a single large image appears, click the P REVIEW choice “off” to replace that larger preview image with the smaller images.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-6 Accessing Images from a PC V iewing Images with the Kodak Driver for TW AIN-Compliant PC Applications The driver image window displays thumbnails of images from the DCS 465 Camera Back PCMCIA card.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Accessing Images from a PC 8-7 2. (Optional) Click once on the small square “I NFO ” box beneath the lower right corner of an image; an information box opens at the right of the driver image window.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-8 Accessing Images from a PC The information box displays data about the status of the camera back when the image was taken.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Accessing Images from a PC 8-9 5. (Optional) Click on P REVIEW . You see a single, enlarged version of the image. The preview image appears in color (if it was taken with a color model of the camera back and if you have a color monitor).
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-10 Accessing Images from a PC Selecting the Color Balance for an Image(s) NOTE: The information in this section applies only to color images. In the following steps you will select an option to correspond to the original lighting conditions under which you took the picture.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Accessing Images from a PC 8-11 The C LICK choice, which is always the preferred option, allows you to provide color balancing data by clicking on a white or light gray area of a thumbnail or a preview.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-12 Accessing Images from a PC Acquiring Images with the Driver for TW AIN-compliant PC Applications You are now ready to acquire an image. Acquiring an image copies its image data from the PCMCIA card into your application, where the acquired image opens into a window.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Accessing Images from a PC 8-13 6. (Optional) Replace the PCMCIA card in the camera back with another card while connected to the computer and repeat the steps of the last several sections; however, do not remove a card while the red Card Busy light on the camera back is blinking.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-14 Accessing Images from a PC Playing Recorded Sound Files Sound files that you have recorded when using the camera back are saved to the PCMCIA card as described in chapter 6.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Accessing Images from a PC 8-15 When you click on the sound file icon you see a list of sounds; select the sound file you want to play. To play sounds you must have a sound board installed in your PC.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-16 Accessing Images from a PC Using Other Features of the Driver for TW AIN-Compliant PC Applications The driver provides a variety of additional features that allow you to work with image and sound files on the DCS 465 Camera Back PCMCIA card and on the PC hard disk.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Accessing Images from a PC 8-17 D ELETE Button Deletes “selected” image files and associated recorded sound data from the PCMCIA card.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-18 Accessing Images from a PC S OURCE Popup Menu Allows you to switch between files on the DCS 465 Camera Back (choose C AMERA from the popup menu), or archive files on the PC (choose F OLDER from the popup menu).
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Accessing Images from a PC 8-19 Creating Monochrome Images with Your Color Camera Back You may be able to use your application to create monochrome images from color images taken with a color camera back.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-20 Accessing Images from a PC If you transport your images to another computer system (perhaps you are distributing unacquired images to oth.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Accessing Images from a PC 8-21 Quitting Complete these steps when you have completed your work with the DCS 465 Camera Back and the PC.
.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — DCS 465 Camera Back 9-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-2 Reference — DCS 465 Camera Back DCS 465 Camera Back and Imager The KODAK camera back incorporates a charge coupled device (CCD) full-frame imager that collects light resulting in a file containing 6.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — DCS 465 Camera Back 9-3 There are sixteen megabytes of DRAM in the DCS 465 Camera Back.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-4 Reference — DCS 465 Camera Back DCS 465 Camera Back Controls Liquid Crystal Display (LCD) A liquid crystal display (LCD) on the back of the KODAK camera back provides status information for the DCS 465 Camera Back.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — DCS 465 Camera Back 9-5 ISO SCSI Battery indicator Frames remaining ISO indicator SCSI indicator Disk indicator LCD FULL GRAPHICS (For this illustration all items are shown simultaneously although at no time do all of these items appear together on the LCD.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-6 Reference — DCS 465 Camera Back When you operate with the AC battery charger/adapter connected, the three segments of this icon light repeatedly in turn from bottom to top while the battery is charging.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — DCS 465 Camera Back 9-7 2. Image Reference Number A separate image number is assigned by the camera back to each picture you take. These numbers go up by one as each picture is taken.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-8 Reference — DCS 465 Camera Back functional problems; however, you can avoid potential confusion by occasionally erasing or formatting the PCMCIA card after copying all needed images to your computer hard disk.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — DCS 465 Camera Back 9-9 Control Buttons Two control buttons — ISO and SCSI ID — are provided on the KODAK camera back. Both are recessed in the housing and are operational when pressed with a fingertip or other blunt object.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-10 Reference — DCS 465 Camera Back ISO Button and ISO Indicator You use the ISO button to set the ISO on the camera back. To use the ISO button, if you are not connected to a computer or the AC battery charger/adapter, first press the record button to wake the DCS 465 Camera Back.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — DCS 465 Camera Back 9-11 Several seconds after you stop pressing the button, ISO mode turns off; reactivate it, if needed, as described above, and press the ISO button again.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-12 Reference — DCS 465 Camera Back SCSI ID Button and SCSI Indicator You use the SCSI ID button to set the DCS 465 Camera Back SCSI ID. The setting is important when the DCS 465 Camera Back is connected to your computer.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — DCS 465 Camera Back 9-13 To set the SCSI ID, first make sure the camera back is not connected to your computer. Then wake the camera back by pressing the record button (this is not necessary if you are connected to the AC battery charger/ adapter).
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-14 Reference — DCS 465 Camera Back SCSI Connector A single 25-pin, female, subminiature D, SCSI connector appears on the KODAK camera back. You connect the DCS 465 Camera Back to your computer from this connector with one of the supplied SCSI cables.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — DCS 465 Camera Back 9-15 Multipurpose Connector A 7-pin mini-din connector on the camera back serves several purposes. You plug the AC battery charger/adapter directly into this connector.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-16 Reference — DCS 465 Camera Back PCMCIA Cards “Standard,” removable, credit-card sized PCMCIA cards (Personal Com- puter Memory Card International Association) are used for image storage.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — DCS 465 Camera Back 9-17 Consult the specifications for your cards to determine if their operating limits (for temperature, humidity, etc.), are more restrictive than those for the DCS 465 Camera Back, and if they are, adhere to those limits.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-18 Reference — DCS 465 Camera Back associated with that single PCMCIA card, or with another part of the camera back. If the problem is with the PCMCIA card, you can try the steps in the next paragraph.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — DCS 465 Camera Back 9-19 DCS 465 Camera Back Operating Configurations You can use the camera back in the following configurations. IMPORTANT: Refer to chapters 4 (Macintosh) or 5 (PC) for specific cabling and termination details.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-20 Reference — DCS 465 Camera Back T aking Pictures While Connected to the Computer You can take pictures with your camera and the camera back while connected to the computer (for example in a studio setting).
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — DCS 465 Camera Back 9-21 Images are stored on the PCMCIA card as you take them. The camera back will not operate once the PCMCIA card is full. When full, you will need to do one or more of the following.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-22 Reference — DCS 465 Camera Back driver image window; the previous image is lost (even though the image counter is increased by one) unless you have acquired it or copied/moved it to the computer hard disk.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — DCS 465 Camera Back 9-23 Battery and AC Battery Charger/ Adapter Battery The DCS 465 Camera Back incorporates a single, rechargeable nickel hydride battery.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-24 Reference — DCS 465 Camera Back AC Battery Charger/Adapter To camera AC BATTERY CHARGER/ADAPTER POWER CORD To wall outlet To AC battery.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — DCS 465 Camera Back 9-25 You can operate the camera back while connected to the supplied AC battery charger/adapter, or you can recharge the battery with the adapter and then use the camera back in the field without the adapter.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-26 Reference — DCS 465 Camera Back Recorded Sound The DCS 465 Camera Back can record sound via a built-in microphone positioned in the camera back. This feature, implemented with a goal of simplicity and ease of use, allows you to record audio information about images or other subjects.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — DCS 465 Camera Back 9-27 As a sound segment is recorded, it is held briefly in dynamic random access memory (DRAM) in the camera back, and is then moved to the PCMCIA card where it is saved as a sound file.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-28 Reference — DCS 465 Camera Back As sound is being recorded, segments of the disk icon bounce up and back, serving as a level meter (similar to the levels commonly displayed on audio equipment like tape decks).
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — DCS 465 Camera Back 9-29 During the interruption between each 25 second segment, the red Card Busy LED on the camera back blinks, and the dot in the disk icon goes off. These indicate that data are being written to the card, and that sound is not being recorded.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-30 Reference — DCS 465 Camera Back A wake/Sleep State of the DCS 465 Camera Back The awake/sleep state of the KODAK camera back depends on the mode of camera back operation as follows.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — DCS 465 Camera Back 9-31 No power when using the battery. The battery is discharged. Charge the battery with the AC battery charger/adapter, or operate from the AC battery charger/adapter.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-32 Reference — DCS 465 Camera Back There are unexpected delays when reading from or writing to a PCMCIA card. The battery is cold. Warm the battery to room temperature. Condensation may be present in the camera back or PCMCIA card.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — DCS 465 Camera Back 9-33 The PCMCIA card is not formatted; “E6” appears on the camera back LCD. Format the PCMCIA card as described in chapters 4 (Macintosh) or 5 (PC) and try again.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-34 Reference — DCS 465 Camera Back Two characters, an “E” followed by a single digit (for example “E2”), appear on the camera back LCD. An error occurred on the PCMCIA card or in DRAM.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — DCS 465 Camera Back 9-35 You are losing images from the PCMCIA card. An error occurred on the card.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-36 Reference — DCS 465 Camera Back The camera back acts erratically, unusual or unexpected characters appear on the camera back LCD, or the LCD flickers unexpectedly. The battery in the camera back is low or dead.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — DCS 465 Camera Back 9-37 Cleaning the Imager and Cleaning/ Replacing the KG5 Filter Glass CAUTION: In the following steps you will expose the imager to the environment.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-38 Reference — DCS 465 Camera Back Technique 1: Examine a Test Image 1. Set up the DCS 465 Camera Back to operate while connected to a computer. 2. Set the lens aperture to its highest f number, to provide for maximum depth of field.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — DCS 465 Camera Back 9-39 lint web cleaner pads, and a cleaning solution. The wrist strap is used to provide protection against damaging electronic components of the camera back. IMPORTANT: Use only the cleaning materials provided with the DCS 465 Camera Back.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-40 Reference — DCS 465 Camera Back 6. Attach the strap to your hand. 7. Attach the clip of the ESD wrist strap cable to a corner of the camera mounting plate as shown below; you and the camera back are now at the same potential.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — DCS 465 Camera Back 9-41 8. Remove the frame that holds the KG5 filter glass by removing the four screws that hold the frame in place. KG5 FILTER GLASS FRAME 9. Carefully lift the KG5 filter glass from the camera back.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-42 Reference — DCS 465 Camera Back 11. Hold the camera back so that light reflects off the imager; visually inspect the imager for grease, fingerprints, lint, or other dirt.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — DCS 465 Camera Back 9-43 5. Gently scrub the imager with the damp corner of the cleaner pad; use a circular motion, and move over the entire imager. This action should dislodge dirt and/or remove grease and fingerprints.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-44 Reference — DCS 465 Camera Back Cleaning the Filter Glass It is possible that the glass covering in the middle of the face of the camera back (the side with the imager), called the KG5 filter glass, may become dirty, or may break.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — DCS 465 Camera Back 9-45 6. Wipe off residue on the filter glass by wiping repeatedly straight across the glass with a dry corner of the cleaning pad. 7. Carefully lift the filter glass by its edge, and examine it in the light to determine if it has been cleaned successfully.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-46 Reference — DCS 465 Camera Back Calibration (CAL) Files In order to use any images taken with your DCS 465 Camera Back, a “calibration” (CAL) file designed for your particular camera back must be present on your computer hard disk.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — KODAK Driver for Adobe Photoshop (Macintosh) Software 10-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10- 2 Reference — KODAK Driver for Adobe Photoshop (Macintosh) Software Introduction The driver supplied by Kodak for use with Adobe Photosh.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — KODAK Driver for Adobe Photoshop (Macintosh) Software 10-3 Image Archive Folders Images saved to the Macintosh computer hard disk by clicking C OPY TO F OLDER or M OVE TO F OLDER from within the Photoshop driver supplied by Kodak can be read only with the Photoshop driver.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10- 4 Reference — KODAK Driver for Adobe Photoshop (Macintosh) Software Commands The driver provides a variety of features that allow you to work with image and sound files on the DCS 465 Camera Back PCMCIA card and on the Macintosh hard disk.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — KODAK Driver for Adobe Photoshop (Macintosh) Software 10-5 KODAK DCS 465 Digital Camera Back The driver image window displays th.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10- 6 Reference — KODAK Driver for Adobe Photoshop (Macintosh) Software Thumbnails appear in the driver image window in the same logical order that images appear on the DCS 465 Camera Back PCMCIA card.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — KODAK Driver for Adobe Photoshop (Macintosh) Software 10-7 number, an image number, and the ISO value used.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10- 8 Reference — KODAK Driver for Adobe Photoshop (Macintosh) Software The time and date are maintained by the battery in the DCS 465 Camera Back. You update the date and time with the S ET C LOCK choice described later in this chapter.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — KODAK Driver for Adobe Photoshop (Macintosh) Software 10-9 C HANGE F OLDER Allows you to close the current archive folder (its contents are shown in the driver image window), and open another archive folder on the Macintosh computer hard disk.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10- 10 Reference — KODAK Driver for Adobe Photoshop (Macintosh) Software C LICK Allows you to provide color balancing data by clicking on a white or light gray area of a thumbnail or a preview.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — KODAK Driver for Adobe Photoshop (Macintosh) Software 10-11 If there is no white or light gray area in the image, take a photo- graph of a neutral gray or white card (for example KODAK Gray Cards, Publication No.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10- 12 Reference — KODAK Driver for Adobe Photoshop (Macintosh) Software S ELECT Highlights images. (A narrow border surrounds highlighted images.) The buttons are useful for selecting images to delete, or to copy or move to the Macintosh computer hard disk.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — KODAK Driver for Adobe Photoshop (Macintosh) Software 10-13 L AST I MAGE Highlights the last image. This choice is dimmed when there are no images available. N ONE Click on this button to deselect all highlighted images.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10- 14 Reference — KODAK Driver for Adobe Photoshop (Macintosh) Software clicking the A CQUIRE button. Images can be acquired while in preview or thumb- nail mode. If you are using Adobe Photoshop version 2.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — KODAK Driver for Adobe Photoshop (Macintosh) Software 10-15 or an archive folder on the Macintosh computer hard disk. A dialog box provides you with the option of deleting the images.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10- 16 Reference — KODAK Driver for Adobe Photoshop (Macintosh) Software C ONTROL P ANEL Displays the following dialog box.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — KODAK Driver for Adobe Photoshop (Macintosh) Software 10-17 service center, since new versions of the file that you may obtain can be copied to the camera back with this com- mand.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10- 18 Reference — KODAK Driver for Adobe Photoshop (Macintosh) Software D O S ELF T EST Click this button to perform a diagnostic self-test of the DCS 465 Camera Back. Messages inform you of the outcome of the self-test.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — KODAK Driver for Adobe Photoshop (Macintosh) Software 10-19 then click on the S ET C LOCK button to update this time from the system clock. E RASE D ISK Select this choice to erase the PCMCIA card in the camera back.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10- 20 Reference — KODAK Driver for Adobe Photoshop (Macintosh) Software The following examples explain the action of this button. Example 1. Suppose that you have a camera back with a PCMCIA card capable of storing 26 images, and that you have taken ten pictures and then deleted one.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — KODAK Driver for Adobe Photoshop (Macintosh) Software 10-21 images can not be predetermined.) If you recover the PCMCIA card, you will recover 20 images. The three new images will be there plus 17 of the most recent 20 images.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10- 22 Reference — KODAK Driver for Adobe Photoshop (Macintosh) Software Saving Sound Files to Y our Computer Hard Disk Once in the driver, a sound file recorded with the camera back appears as a small icon below the lower left hand corner of an image thumbnail, as shown on the next page.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — KODAK Driver for Adobe Photoshop (Macintosh) Software 10-23 Sound file icon KODAK DCS 465 Digital Camera Back.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10- 24 Reference — KODAK Driver for Adobe Photoshop (Macintosh) Software Creating Monochrome Images with Y our Color Camera Back You can use your color camera back to create monochrome images.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — KODAK Driver for Adobe Photoshop (Macintosh) Software 10-25 “A colon (:) is not allowed in a filename.” During a “Copy to Folder” or “Move to Folder” operation, you have entered a colon as part of a filename.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10- 26 Reference — KODAK Driver for Adobe Photoshop (Macintosh) Software “A new version of the driver is needed to use this image.” The driver you are using is outdated and will not work with the current version of the DCS 465 Camera Back.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — KODAK Driver for Adobe Photoshop (Macintosh) Software 10-27 “Camera back is busy. Try command again later.” You have tried a command (for example Copy to Folder), and the DCS 465 Camera Back is still performing another operation.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10- 28 Reference — KODAK Driver for Adobe Photoshop (Macintosh) Software “Cannot Take Picture at this time. Battery is low.” You have clicked Take Picture while connected to an electrically tripped camera, but the battery is low.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — KODAK Driver for Adobe Photoshop (Macintosh) Software 10-29 “Cannot Take Picture at this time. Disk is full.” The PCMCIA card in the camera back is full when you clicked Take Picture.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10- 30 Reference — KODAK Driver for Adobe Photoshop (Macintosh) Software “Could not acquire this image because informational data was invalid.” You have tried to acquire a blank image, or an image that has been corrupted.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — KODAK Driver for Adobe Photoshop (Macintosh) Software 10-31 Message Possible Cause Suggested Solution “Delete ALL images in Folder?” You are about to delete all images in an archive folder on your computer hard disk (not only the images in the image window).
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10- 32 Reference — KODAK Driver for Adobe Photoshop (Macintosh) Software “Driver may not be compatible with this version of Photoshop™” The driver and your version of Adobe Photoshop are incompatible.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — KODAK Driver for Adobe Photoshop (Macintosh) Software 10-33 “Error reading from Source Archive folder.” An unusual condition is detected when reading from an archive folder on your computer hard disk.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10- 34 Reference — KODAK Driver for Adobe Photoshop (Macintosh) Software “Firmware Update failed. Could not find firmware ‘DCS465.BIN’ file from Macintosh.” The “DCS465.BIN” file was not found in the same folder as the “KODAK DCS 465” file.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — KODAK Driver for Adobe Photoshop (Macintosh) Software 10-35 “Format Disk? ALL Images will be lost and cannot be RECOVERED. This can take several minutes” You have clicked the Format Disk button on the Control Panel to format a PCMCIA card.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10- 36 Reference — KODAK Driver for Adobe Photoshop (Macintosh) Software “Last folder used is invalid. Requesting new folder.” The folder you were using during your last work session has been deleted or renamed.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — KODAK Driver for Adobe Photoshop (Macintosh) Software 10-37 Message Possible Cause Suggested Solution “Not enough memory. Try closing windows or increasing application memory size.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10- 38 Reference — KODAK Driver for Adobe Photoshop (Macintosh) Software Recover Disk complete but no images were found. The PCMCIA card has been recovered successfully but there were no images on the card.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — KODAK Driver for Adobe Photoshop (Macintosh) Software 10-39 The SCSI cable is not connected properly. Verify that the SCSI cable is connected properly between the computer and the DCS 465 Camera Back.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10- 40 Reference — KODAK Driver for Adobe Photoshop (Macintosh) Software The battery in the camera back is dead. Operate from the AC battery charger/adapter or charge the battery from the adapter and try again.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — KODAK Driver for Adobe Photoshop (Macintosh) Software 10-41 “The PCMCIA disk in the camera back is NOT a DOS Disk. If you want to use this disk with the camera back press the Control Panel button and then the Format Disk button.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10- 42 Reference — KODAK Driver for Adobe Photoshop (Macintosh) Software Message Possible Cause Suggested Solution “This driver requires 32- Bit QuickDraw to operate.” You are working with a supported Macintosh computer but the 32-Bit QuickDraw file is missing.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — KODAK Driver for Adobe Photoshop (Macintosh) Software 10-43 The Acquire command on the File menu is dimmed, meaning that you cannot access the KODAK DCS 465 camera back choice, or the KODAK DCS 465 camera back choice does not appear on the Acquire submenu.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10- 44 Reference — KODAK Driver for Adobe Photoshop (Macintosh) Software You are unable to open the software driver when you choose its name from the Acquire submenu while the camera back is connected to the computer.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — KODAK Driver for Adobe Photoshop (Macintosh) Software 10-45 Acquired images have random defects, or there is other noise in the image. You are using a SCSI cable longer than those supplied with the DCS 465 Camera Back.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10- 46 Reference — KODAK Driver for Adobe Photoshop (Macintosh) Software The Macintosh computer crashes or you lose files or folders from your Macintosh hard disk. You are using System 7.0 or System 7.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — KODAK Driver for Adobe Photoshop (Macintosh) Software 10-47 The Delete and Move to Folder buttons are dimmed when the Source is Folder and you have images selected. The archive folder is locked.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10- 48 Reference — KODAK Driver for Adobe Photoshop (Macintosh) Software You have obtained and installed a new BIN file and clicked Update Camera Firmware in the Control Panel but the camera back firmware shows the old version number.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — KODAK Drivers for TWAIN-Compliant PC Applications 11-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11- 2 Reference — KODAK Drivers for TWAIN-Compliant PC Applications Introduction The drivers supplied by Kodak for use with TWAIN-compliant PC applica- tions provide a variety of features that allow you to work with image and sound files on the DCS 465 Camera Back, and on the PC hard disk.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — KODAK Drivers for TWAIN-Compliant PC Applications 11-3 Image Archive Folders Images saved to the PC hard disk by clicking C OPY .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11- 4 Reference — KODAK Drivers for TWAIN-Compliant PC Applications Commands The driver provides a variety of features that allow you to work with image and sound files on the DCS 465 Camera Back PCMCIA card and on the PC hard disk.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — KODAK Drivers for TWAIN-Compliant PC Applications 11-5 The driver image window displays thumbnails, either from images on the DCS 465 Camera Back PCMCIA card, or from image archive files previ- ously saved in a folder on the PC hard disk by this driver.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11- 6 Reference — KODAK Drivers for TWAIN-Compliant PC Applications When working with images from a folder from the PC hard disk instead of images from the PCMCIA card, the folder name appears at the top of the image window.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — KODAK Drivers for TWAIN-Compliant PC Applications 11-7 The time and date are maintained by the battery in the DCS 465 Camera Back. You update the date and time with the S ET C LOCK choice described later in this chapter.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11- 8 Reference — KODAK Drivers for TWAIN-Compliant PC Applications C HANGE F OLDER Allows you to close the current archive folder (its contents are shown in the driver image window), and open another archive folder.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — KODAK Drivers for TWAIN-Compliant PC Applications 11-9 C LICK Allows you to provide color balancing data by clicking on a white or light gray area of a thumbnail or a preview. C LICK is always the preferred option.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11- 10 Reference — KODAK Drivers for TWAIN-Compliant PC Applications Cards, Publication No.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — KODAK Drivers for TWAIN-Compliant PC Applications 11-11 does not merely delete the last image from computer memory, but in addition, these actions will delete the last image from the source (C AMERA or archive folder).
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11- 12 Reference — KODAK Drivers for TWAIN-Compliant PC Applications A CTION Provides the following capabilities. A CQUIRE Allows you to acquire an image into your TWAIN-compliant PC applica- tion.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — KODAK Drivers for TWAIN-Compliant PC Applications 11-13 C OPY TO F OLDER … Copies highlighted images and associated sound files if any, whether currently visible in the image window or not, to the PC hard disk.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11- 14 Reference — KODAK Drivers for TWAIN-Compliant PC Applications Do not rename any DCS 465 generated TIFF or WAV files in DCS image folders. Doing so may produce unpredictable driver behavior.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — KODAK Drivers for TWAIN-Compliant PC Applications 11-15 If the S OURCE is F OLDER , the items in the box below related to the PCMCIA card (such as U PDATE C AMERA F IRMWARE or E RASE D ISK ), are not in effect and are therefore dimmed or do not appear.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11- 16 Reference — KODAK Drivers for TWAIN-Compliant PC Applications If you are unable to open the driver (and therefore cannot access the Control Panel containing the button), hold down the Control key on your keyboard while accessing the driver from your application.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — KODAK Drivers for TWAIN-Compliant PC Applications 11-17 S ET C LOCK Click this button to set the date and time in the DCS 465 Camera Back. The date and time (in 24-hour format) are maintained in the camera back by the main camera back battery.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11- 18 Reference — KODAK Drivers for TWAIN-Compliant PC Applications F ORMAT D ISK Click this button to format the PCMCIA card in the camera back. This action is similar to formatting a floppy diskette or hard disk on your computer system.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — KODAK Drivers for TWAIN-Compliant PC Applications 11-19 Example 2. Suppose that you have taken ten pictures, have deleted three, and taken another picture. In this case, the newest picture overwrites one of the deleted images.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11- 20 Reference — KODAK Drivers for TWAIN-Compliant PC Applications C OLOR T HUMBNAILS Click this feature on (an X appears in the check box to the left of this option when on), to display thumbnails in color.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — KODAK Drivers for TWAIN-Compliant PC Applications 11-21 Saving Sound Files to Y our Computer Hard Disk A sound file(s) recorded with the camera back appears as a small icon below the lower left hand corner of an image thumbnail in the driver image window.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11- 22 Reference — KODAK Drivers for TWAIN-Compliant PC Applications Sound file icon.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — KODAK Drivers for TWAIN-Compliant PC Applications 11-23 Creating Monochrome Images with Y our Color Camera Back You may be able to use your color camera back to create monochrome images.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11- 24 Reference — KODAK Drivers for TWAIN-Compliant PC Applications The camera back SCSI ID is set improperly. Reset the camera back SCSI ID so that it is different from other devices connected to the computer.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — KODAK Drivers for TWAIN-Compliant PC Applications 11-25 (Continued from previous page) “A DCS Camera was not found.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11- 26 Reference — KODAK Drivers for TWAIN-Compliant PC Applications “An error occurred while erasing the DCS disk. All images may not have been deleted.” A problem occurred with the PCMCIA card.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — KODAK Drivers for TWAIN-Compliant PC Applications 11-27 “An error occurred while recovering the DCS disk. All images may not have been recovered.” A problem occurred with the PCMCIA card.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11- 28 Reference — KODAK Drivers for TWAIN-Compliant PC Applications “ASPI for Windows does not support this mode.” The ASPI manager does not support the current mode setting. This error may occur when Windows is running in Real Mode.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — KODAK Drivers for TWAIN-Compliant PC Applications 11-29 “Cannot have same folder open for acquiring from and saving to.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11- 30 Reference — KODAK Drivers for TWAIN-Compliant PC Applications “Cannot Take Picture at this time. Check the following. The camera back is busy. The camera cannot be electrically tripped.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — KODAK Drivers for TWAIN-Compliant PC Applications 11-31 “Cannot Take Picture at this time. The battery is LOW.” The battery is low. If you are operating while the AC battery charger/adapter is connected, wait for a short time and try again.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11- 32 Reference — KODAK Drivers for TWAIN-Compliant PC Applications “Command failure: Unable to free resource from global memory.” A problem has occurred with Windows. Restart your computer and try again.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — KODAK Drivers for TWAIN-Compliant PC Applications 11-33 “DCS Hardware Error” A problem with the hardware has been detected.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11- 34 Reference — KODAK Drivers for TWAIN-Compliant PC Applications “File Error: Cannot find WINASPI.DLL.” The TWAIN compliant KODAK Driver for ASPI is installed, but a Future Domain SCSI Host Adapter and not an ASPI compliant host adapter is installed in the computer.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — KODAK Drivers for TWAIN-Compliant PC Applications 11-35 “Firmware update has completed successfully.” You have clicked Update Camera Firmware and the update completed properly.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11- 36 Reference — KODAK Drivers for TWAIN-Compliant PC Applications “No ASPI managers for Windows were found.” A problem has occurred with your software ASPI manager for Windows. Install, or reinstall, the ASPI manager for Windows.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — KODAK Drivers for TWAIN-Compliant PC Applications 11-37 “The Battery in the Camera is almost exhausted.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11- 38 Reference — KODAK Drivers for TWAIN-Compliant PC Applications “The image file filename cannot be deleted because it is read-only.” The file is Read Only. To delete the file, you must first use the File Manager to turn off the Read Only property attribute for the file.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — KODAK Drivers for TWAIN-Compliant PC Applications 11-39 “There is not enough memory to hold all the sounds for this folder. You will not be able to play the sounds for all images in this folder.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11- 40 Reference — KODAK Drivers for TWAIN-Compliant PC Applications “Timeout during Command phase.” “Timeout during Data phase.” “Timeout during Message phase.” “Timeout during Selection phase.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — KODAK Drivers for TWAIN-Compliant PC Applications 11-41 The KODAK DCS 465 Camera choice does not appear in your software. You have not installed the driver software. Install the driver.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11- 42 Reference — KODAK Drivers for TWAIN-Compliant PC Applications You are experiencing erratic camera back behavior or unusual characters appear on the camera back liquid crystal display (LCD).
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference — KODAK Drivers for TWAIN-Compliant PC Applications 11-43 The battery has become exhausted while the camera back is connected to the PC; the AC battery charger/adapter is not being used.
.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Appendices 12-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Updating Your Kodak Software Driver A-1 Appendix A — Updating Y our KODAK Software Driver This appendix provides information on obtaining and installing updated software drivers including: Directions for downloading software drivers electronically from several sources.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2 Updating Your Kodak Software Driver Network Description/Address CompuServe “Gives you access to over 1700 products and services, plus the knowledge and expertise of . . . CompuServe members worldwide.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Updating Your Kodak Software Driver A-3 Downloading a Driver from CompuServe This section assumes that you have an account on CompuServe and that you are familiar with procedures to initiate and terminate a session on this network.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-4 Updating Your Kodak Software Driver C. Click GO (Macintosh) or OK (Windows). D. Wait as you are connected to CompuServe and transferred to the K ODAK F ORUM ; if you are not a member of the forum, join the forum when prompted to do so.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Updating Your Kodak Software Driver A-5 E. Click S EARCH ; you see a list of DCS 465 driver updates and other files. F. Select the driver for Adobe Photoshop Macintosh computer or TWAIN if you are working on a PC.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-6 Updating Your Kodak Software Driver 5. Finish with other business on CompuServe as needed, and then terminate your work session.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Updating Your Kodak Software Driver A-7 Extracting Driver Files for TWAIN (PC) The data you have downloaded contains several files that have been combined and compressed into a single file.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-8 Updating Your Kodak Software Driver Downloading a Driver from PressLink This section assumes that you have an account on PressLink and that you are familiar with procedures to initiate and terminate a session on this network.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Updating Your Kodak Software Driver A-9 4. Follow these steps to download the file to your hard disk. A. Click the D OWNLOAD icon; you see a S AVE A S dialog box. B. (Optional) Navigate through your hard disk as needed to choose a location to which the file will be downloaded.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-10 Updating Your Kodak Software Driver Downloading and Unpacking Files for TWAIN (PC) 1. Initiate a computer work session on the PC, run your copy of PressLink System 2000 for Windows, and connect to the host.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Updating Your Kodak Software Driver A-11 5. Choose D ISCONNECT from the N ETWORK menu. You leave the network, but remain in the P RESS L INK S YSTEM 2000 application. 6. Follow these steps to unpack the file you have received.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-12 Updating Your Kodak Software Driver Downloading a Driver from AppleLink This section assumes that you have an account on AppleLink and that you are familiar with procedures to initiate and terminate a session on this network.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Updating Your Kodak Software Driver A-13 D. Wait as the file is downloaded from the network to your com- puter; a progress box provides information on the download process. 6. Finish with other business on AppleLink as needed, and then termi- nate your work session.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-14 Updating Your Kodak Software Driver 3. Navigate through your hard disk (on the right of this dialog box) as needed to choose a location to which the extracted files will be saved. 4. Click S AVE A LL .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Updating Your Kodak Software Driver A-15 Updating the KODAK Driver for Adobe Photoshop Software (Macintosh) 1. Complete all the steps in “Installing the KODAK Driver for Adobe Photoshop Software on Your Macintosh Computer ” in chapter 4, except as noted here.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-16 Updating Your Kodak Software Driver Updating the KODAK Driver for TWAIN Software (PC) 1.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Repacking Instructions B-1 Appendix B — Repacking Instructions for the KODAK Professional DCS 465 Digital Camera Back If you are having difficulties using your KODAK Professional DCS 465 Digital Camera Back, please contact a Kodak representative before returning your unit for service .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-2 Repacking Instructions 3. Remove the DCS 465 Camera Back from your camera. 4. Cover the imager on the camera back with the imager cover. 5. Insert the DCS 465 Camera Back into the static shielding bag and seal the bag with tape.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Problem Report Form C-1 Appendix C — KODAK Professional DCS 465 Digital Camera Back Problem Report Form Customer Return Address Name _______.
.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Optional Equipment & Spare Parts List D-1 Appendix D — Optional Equipment & Spare Parts List Ordering Optional Kodak Equipment from Y our Dealer To order items in this category, contact your dealer.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-2 Optional Equipment & Spare Parts List KODAK XLS 8400 PS Printer Prints 300 pixels per inch, 24-bit color images up to 8.5 x 12-inches (21.6 x 30.5-cm) to KODAK EKTATHERM XLS print paper or transparencies using ADOBE POSTSCRIPT Level 2.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Optional Equipment & Spare Parts List D-3 966157 25-pin to 50-pin SCSI cable IBM/Compatible PC Cables 953867 50-pin to 25-pin SCSI2 cable .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-4 Optional Equipment & Spare Parts List Accessory Adapter Cable 3B4045 This multipurpose 1-to-3 connector/splitter allows you to use the AC battery charger/adapter with other accessories as available.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Optional Equipment & Spare Parts List D-5 You can order the following DCS 465 Camera Back accessories from Digital and Applied Imaging Marketing Support (DAIMS) Customer Service. Call 1-800-535-4633 Monday to Friday between the hours of 9:00 a.
.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Specifications E-1 Appendix E — Specifications KODAK Camera Back 3060 x 2036-pixel charge coupled device (CCD) full-frame imager, resulting in images composed of 6.0 megapixels of data. Acquired color images are 18 megabytes (MB) and acquired monochrome images are 6 MB.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . E- 2 Specifications KG5 built-in replaceable filter glass. Camera Sync 4-pin mini-din connector. Electrically tripped camera (Elec Cam Trip) 3-pin mini-din connector. Shutter release 5-pin mini-din connector.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Glossary F-1 Appendix F — Glossary This section provides brief explanations of terms used in conjunction with the DCS 465 Camera Back. Refer to these items individually in the Index in this manual to find additional reference material about the following terms.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . F-2 Glossary BIN file. This file contains firmware, the control programming used by the camera back. You copy — download — this software from your computer hard disk into the camera back when you click the U PDATE C AMERA F IRMWARE button.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Glossary F-3 Driver. The software provided by Kodak as part of the DCS 465 Camera Back that allows you to access the camera back from your computer.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . F-4 Glossary Info box. A window, appearing when you click on “Info” beneath the thumbnail or preview of an image, that displays a variety of data about the status of the camera back when the image was taken.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Glossary F-5 Throw. The distance the pin extends from the end of the cable release when you fully depress the cable release button.
.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Index 13-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13- 2 Index ) ) ) (Sound file icon) Macintosh 7-10, 10-23 TWAIN 8-9, 11-22 3-pin connector 3-6, 3-7 Macintosh 4-5, 4-6 TWAIN 5-5, 5-6 32-bit Q.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Index 13-3 Cancel Macintosh 7-22, 10-21 TWAIN 8-21, 11-20 Card Busy light 2-4, 3-8, 6-10 to 6-11, 9-17 Macintosh 4-36 to 4-41 TWAIN 5-36 to 5-41 CCD (charge coupled device) im- ager 2-3, 9-2, E-1 Change Folder Macintosh 7-19, 7-20, 10-9 TWAIN 8-18, 8-19, 11-8 Charge coupled device.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13- 4 Index Driver image window commands (continued) Move to Folder Macintosh 10-14 to 10-15 TWAIN 11-13 to 11-14 None (Select) Macintosh 10-1.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Index 13-5 Images (continued) Monochrome images created from a color camera back Macintosh 7-20, 10-24 TWAIN 8-19, 11-23 Problems. See Troubleshooting Saving. See Copy to Folder; Move to Folder Text box.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13- 6 Index PCMCIA cards 1-8, 3-2, 3-8, 3-9, 4-36 to 4-41, 5-36 to 5-41, 9-16 to 9-17, 9-19 to 9-22, 9-27 to 9-28, E-1 ATA interface 1-8, 2-4 .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Index 13-7 SCSI (continued) Termination Macintosh 4-17 TWAIN 5-16, 5-19, 5-28, 9-13 Terminator Macintosh 1-3, 4-18 to 4-32 TWAIN 1-5, 5-20 to 5-28 Selecting images Macintosh 7-17 TWAIN 8-16 Self-test.
.
.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-2 Specifications Eastman Kodak Company (“Kodak”) reserves the right to change this information without notice.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Specifications 9-3 Use of the accompanying software is subject to Kodak’s Software License Agreement, which contains Kodak’s limitation of liability terms.
EASTMAN KODAK COMPANY • ROCHESTER, NY 14650 KODAK Professional DCS 465 Digital Camera Back Revised 9-95 Part No. 8B4724 Kodak is a trademark. Printed in U.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Kodak DCS 465 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Kodak DCS 465 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Kodak DCS 465, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Kodak DCS 465 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Kodak DCS 465, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Kodak DCS 465.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Kodak DCS 465. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Kodak DCS 465 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
