Manuel d'utilisation / d'entretien du produit 790.9290 du fabricant Kenmore
Aller à la page of 40
Use & Care Guide Guia de uso y cuidada English / Espafiol Model/Modelos: I<en 790.9270%9280%9290 _ @ coo s __©e% ee P/N 316902011 Rev A Sears Brands Management Corporation Hoffman Estates, IL 60179 U.
Table of Contents Appliance Warranty ............................................................................. 2 Important Safety Instructions ......................................................... 3-6 Product Record/Serial Plate Location .....
Important Safety Instructions Read all instructions before using this appliance. This manual contains important safety symbols and instructions. Please pay attention to these symbols and follow all instructions given. Definitions _This is the alert It is used to alert to safety symbol.
Important Safety Instructions NEVER cover any slots, holes or passages in the oven bottom or cover an entire oven rack with materials such as aluminum foil. Aluminum toll linings may trap heat, causing a fire hazard. DO NOT LEAVE CHILDREN ALONE m children should not be left alone or unattended in the area where appliance is in use.
Important Safety Instructions iMPORTANT iNSTRUCTiONS FOR USING YOUR COOKTOP * Know which knob controls each surface heating unit. Place a pan of food on the surface element unit before turning it on, and turn the element off before removing the pan.
Important Safety Instructions iMPORTANT iNSTRUCTiONS FOR CLEANING YOUR RANGE iMPORTANT iNSTRUCTiONS FOR SELF- CLEANING OVENS Before manually cleaning any part of the range, be sure aii controls are turned OFF and the range is COOL. The range may be hot and can cause burns.
Before Setting Oven Controls Oven vent location The oven vent is located under the left side of the control panel (See Fig. 1). When the oven is on, warm air passes through this vent. This venting is necessary for proper air circulation in the oven and good baking results.
Before Setting Surface Contro& Using proper cookware The size and type of cookware used wiii influence the radiant element power levei setting needed for best cooking results. Be sure to follow the recommendations for using proper cookware as illustrated in both Figs.
Before Setting Surface Controls About the ceramic glass cooktop The ceramic cooktop has radiant surface elements located below the surface of the glass.
Before Setting Surface Controls Types of cooktop surface elements The ceramic glass cooktop has radiant surface elements located below the surface of the glass. The patterns on the ceramic glass will outline the size and type of element available. The single radiant element or elements will have one round outline pattern shown on the cooktop.
Setting Surface Controls Radiant surface element settings The size and type of utensil used, and the amount and type of food being cooked wiil influence the surface element power level setting needed for best cooking results. The suggested settings found in Fig.
Setting Surface Contro& Dual radiant surface element (some models) To operate the dual radiant element: 1. Place correctly sized cookware on single radiant surface element. 2. Push in and turn the surface control knob clockwise to begin heating both the inner and outer portions of the element (marked dual - See Fig.
Setting Surface Controls Triple radiant surface element (some models) To operate the dual radiant element: 1. Place correctly sized cookwore on single radiant surface element. 2. Push in and turn the surface control knob clockwise to begin heating both the inner and outer portions of the element (marked dual - See Fig.
Setting Surface Controls Wclrm & Recldy TM Zone (some models) The purpose of the warmer zone is to keep hot cooked foods at serving temperature. Use the warmer zone feature (See Fig. 1) to keep cooked foods hot such as; vegetables, gravies, casseroles, soups, stews, breads, pastries and oven- safe dinner plates.
Oven Control Functions For satisfactory use of your oven, become familiar with the various key pad functions and features of the oven. OVEN FUNCTIONS Conv Conv Conv Bake Roast Convert 2 3 4 5 6 Cook Delay Timer Add 1 Time Start Set/Off Minute 7 8 9 OVEN LOCKOUT Oven control keypads 1.
Setting Oven Controls Setting Clock When the appliance is first powered up, ]2:00 wiil flash in the display (See Fig. 1). The time of day must first be set before operating the oven. Fig. ] Example; to set the clock to 1:30: (_) key pad. 1. Press 2. Enter | 3 0 using numeric key pads.
Setting Oven Controls Changing oven temperature display The oven control is preset to display °F (Fahrenheit) when shipped from the factory. The control can be changed to display either Fahrenheit or Celsius. Example; to change the temperature to display °C (Celsius) or °F (Fahrenheit): 1.
Setting Oven Controls Setting Preheat For best baking performance use the Preheat feature. The Preheat feature wiii bring the oven up to the set cooking temperature. A reminder tone wiii sound indicating when the set temperature is reached and to place the food in the oven.
Setting Oven Controls Setting Cook Time Use Cook Time to program the oven control to automatically turn the oven function off after a desired length of time. FOOD POISONING HAZARD. Do not let food sit for more than one hour before or after cooking. Doing so can result in food poisoning or sickness.
Setting Oven Controls Cony Bake (some models) Convection Bake (some models) Benefits of the convection bake feature -- Foods may cook up to 25 to 30% faster, saving time and energy.
Setting Oven Controls Cony Roast (some models) The Conv Roast function combines a cool< cycle with the convection fan to roast meats and poultry. Meats cooked with Conv Roast function will be juicer and poultry will be crisp on the outside while staying tender and moist on the inside.
Setting Oven Controls Broil Use the broil function to cool< meats that require direct exposure to radiant heat for optimum browning results. The Broil feature is factory preset to broil at 550°F. The Broil function temperature may be set at any temperature between 400°F (205°C) and 550°F (288°C).
Setting Oven Controls Slow Cook The Slow Cook feature may be used to cook foods more siowiy and at lower oven temperatures. Slow Cook provides cooking results much the same way as a Slow Cooker or Crock-Pot. The Slow Cook feature is ideal for roasting beef, pork & poultry.
Setting Oven Controls Warm & Hold TM Warm & Hold wiii keep cooked foods warm for serving up to 3 hours after cooking has finished. After 3 hours the Warm & Hold wiii shut-off automatically. Warm & Hold should only be used with foods that are already at serving temperatures.
Setting Oven Controls Recipe Recall (cont_d) To quickly erase all stored recipes: 1. Press and hold the 7 key pad until the first single tone sounds (6 seconds). 2. After the first tone press START; once. Any stored recipes will be erased. Important note: Clearing all recipes will also reset aii other adjustments to factory settings.
Setting Oven Controls Sabbath Feature (for use on the Jewish Sabbath & Holidays) For further assistance, guidelines for proper usage and a complete list of models with the Sabbath feature, please vist the web at http:www.sta r-k.org. The Cook Time and Delay Start key pads are used to set the Sabbath feature.
Setting Oven Controls Sabbath Feature (for use on the Jewish Sabbath & Holidays) Example = to turn the oven off and keep the Sabbath feature active: [] Press STOP. Example = to turn off the Sabbath feature: Press and hold both Cook Time and Delay Start key pads simultaneously for at least 3 seconds to turn the Sabbath feature off.
Setting Warmer Drawer Control Warm _ Ready TM drawer (some models) The purpose of the warmer drawer is to keep hot cooked foods at serving temperatures. Examples are vegetables, gravies, meats, casseroles, biscuits, rolls and pastries. It is not recommended to heat cold food in the warmer drawer; always start with hot food.
Setting Warmer Drawer Control Warmer drawer indicator light The indicator light is located above the Warmer Drawer thermostat control knob. It turns on when the control is set, and stays on until the control is turned OFF. Setting warmer drawer The thermostat control knob is used to select the temperature for the warmer drawer.
Flex Clean A self-cleaning oven cleans itself with high temperatures (well above normal cooking temperatures) which eliminate soils completely or reduces them to a fine powdered ash you can wipe away aftwerwards with a damp cloth. The Flex Clean function allows you to set any amout of cleaning time from 2 hours to 4 hours.
Flex Clean As soon as Flex Clean becomes active, a motor driven lock mechanism wiii begin locking the oven door automatically. DOOR LOCKED wiii appear in the display (See Fig. 1). DO NOT open the oven door when DOOR LOCKED is flashing (allow 15 seconds for the lock mechanism to lock the oven).
Care & Cleaning Cleaning recommendation table Surface type Recommendation Control knobs Pointed body ports Pointed decorative trim Aluminum, plastic or vinyl trim pieces For general cleaning, use hot, soapy water and a cloth. For more difficult soils and built-up grease, apply a liquid detergent directly onto the soil.
Care & Cleaning Cooktop maintenance Consistent and proper cleaning is essential to maintaining your ceramic glass cooktop. Prior to using your cooktop for the first time, apply the recommended CookTopO Cleaning Creme to the ceramic surface (on the web visit www.
Care & Cleaning Cooktop cleaning Do not use the following on the cooktop: • Do not use abrasive cleaners and scouring pads, such as metal and some nylon pads.
Care & Cleaning Removing and replacing the lift-off oven door To avoid possible injury when removing or replacing the oven door, follow the instructions below carefully and always hold the oven door with both hands positioned away from the door hinge area.
Before You Call • Sobfions to common problems Before you call for service, review the following list. It may save you time & expense. Possible solutions to these problems are provided with the problem listed: Problem Solution Poor baking results.
Before You Call • Solutions to common problems Problem Solution Oven smokes excessively when broiling. ° Incorrect setting. Follow broiling instructions in Setting Oven Controls section. * Be sure oven door is opened to broil stop position when broiling.
Before You Call • Solutions to common problems Problem Solution Scratches or abrasions on cooktop surface. Coarse particles such as salt or hardened soils between cooktop and utensils can cause scratches. Be sure cooktop surface and bottoms of utensils are clean before usacje.
Protection Agreements Master Protection Agreements Congratulations on making a smart purchase. Your new Kenmore ® product is designed and manufactured for years of dependable operation. But like all products, it may require preventive maintenance or repair from time to time.
You r H o m e For troubleshooting, product manuals and expert advice: • g y" . For repair - in your home - of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! For,the replacement parts, accessories and owner s manuals that you need to do-it-yourself.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Kenmore 790.9290 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Kenmore 790.9290 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Kenmore 790.9290, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Kenmore 790.9290 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Kenmore 790.9290, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Kenmore 790.9290.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Kenmore 790.9290. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Kenmore 790.9290 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
