Manuel d'utilisation / d'entretien du produit XA-A50CL du fabricant JVC
Aller à la page of 31
Cover.
Safety and Cautions "SOME DO'S AND DON'TS ON THE SAFE USE OF EQUIPMENT" This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured.
NEVER let anyone especially children push anything into holes, slots or any other opening in the case. This could result in a fatal electrical shock. NEVER guess or make changes with electrical equipment of any kind.
About FCC information FCC INFORMATION This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation.
Cautions 1. For your safety TO REDUCE THE RISK OF FIRE OR ELECTRIAL SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. Never use the Digital Audio Player when driving a car, motorcycle, or bicycle. This could result in an accident. Pay close attention to traffic around you when using the Digital Audio Player while walking.
disconnect the USB cable when transferring the files. About ALKALINE BATTERIES (1) For safe use, DO NOT attempt to charge the alkaline batteries. reverse the polarities of the batteries. carry or store a battery together with objects such as metal pens, necklaces, coins or hairpins.
Introduction Thank you for purchasing the JVC product. Before you begin operating this unit, please read this operating instructions carefully to be sure you get the best possible performance. If you have any questions, consult your JVC dealer. CAUTION: This unit is compatible with WMA - DRM.
Accessories Check the supplied accessories after unpacking. CD - ROM USB 1.1 cable Cable clip.
Features What is Digital Audio Player XA - A50CL? XA - A50CL is an Ear - Clip headphone type Digital Audio Player, which creates a high quality sound reproduced by the 30 mm diameter Neodymium driver unit in an innovative design shell.
Copyright protection For copyright protection, Digital Audio Player has a limitation on importing files. Digital Audio Player is compatible with WMA - DRM.
About this instruction Configuration of this instruction This instruction is configured with the following 4 sections: The screens used in this instruction are from Windows XP. The screens and procedures explained may differ depending on your PC. Also, software images for explanation may differ from the actual look.
Parts Identification 1. (Stop/Play/Power) button 2. Operation indicator Lights: When setting up the unit Flashes 2 times every 5 seconds: During playback Flashes every 2 seconds: During pause 3. (Skip) buttons 4. (Volume) buttons 5. button 6. USB port cover 7.
About Voice Guidance Digital Audio Player has Voice Guidance system, which informs you the operational information of the Digital Audio Player. For example, when you press (next) button while listening to the music, you will hear "Next" through the Digital Audio Player to confirm the operation.
Preparation Driver installation (For Windows 98SE user ONLY) When using Windows 98SE, install the USB driver for accessing the Digital Audio Player. 1. Connect the Digital Audio Player to your PC using the supplied USB cable. Check "CD - ROM" for the driver selection on the dialog.
Selecting the language for the Voice Guidance You can change the language of the guide voice by selecting the guide voice files stored in the supplied CD - ROM. The initial language is set to English. 1. Load the supplied CD - ROM on your PC. The language selection screen appears.
Putting the battery 1. Slide open the battery cover. 2. Insert the alkaline battery, matching the + and - . Press in on - end first and down on + end. 3. Close the battery cover. About changing the battery The battery should be changed when the operation indicator fades or does not turn on.
Basic Operation Transferring the music files into the Digital Audio Player In this instruction, the file - transferring procedure is explained using the Windows Media Player.
To connect to your PC 1. Open the USB port cover of the right headphone. 2. Connect the Digital Audio Player to your PC using the supplied USB cable. The operation indicator of the Digital Audio Player starts flashing. 3. Press to permit the access to the Digital Audio Player from the PC.
When dragging - and - dropping the music files to the Digital Audio Player, use "Copy" command to select the files. When you do this operation using "Cut" command, the music files and folders are deleted on your PC. To disconnect the Digital Audio Player from your PC, use "Safety Remove Hardware".
Putting on the headphones 1. Open the Ear Hook outward slightly. 2. Put the Ear Hook on your ear and adjust the Ear Hook position to fit your ear. 3. Close the Ear Hook. NOTE: Stretching the ear hook on the headphone too wide from its original position may result in damage to the ear hook.
Turning on the power 1. Press and hold from 2 to 5 seconds to turn on the Digital Audio Player. The Operation indicator lights up and the Digital Audio Player is turned on, then the playback starts. When the playback position is memorized, playback starts from the memorized position.
Adjusting volume 1. Press . : Increases the volume with a high beep sound. : Decreases the volume with a low beep sound. When pressing and holding the button, the volume is changed continuously with a single beep sound. NOTES: When activating Voice Guidance system, the volume adjustment does not take effect to the guide voice.
Basic playback To stop playback 1. Press . The playback is stopped with the current position of the playback memorized, then the Digital Audio Player is turned off 10 seconds later. When pressing and holding for 2 seconds, the Digital Audio Player turns off without the memory of the current position.
Advanced Operation Playing back with playlist You can make up to three playlists to customize the playback files you want to. Using a playlist, you can edit the playback files and their order. NOTE: When the music file listed in the playlist does not exist on the Digital Audio Player, the step is skipped.
To switch a playlist 1. During playback with a playlist, press and hold until the desired playlist is selected. To turn off the playback with a playlist, press and hold until "Playlist off" is heard.
Various effects and setting You can add various effects to the music sound and changing the basic setting using the button. NOTE: There is a time limit in doing the following procedures. If you do not press any button about 10 seconds, the mode setting is canceled after setting the current item and playback resumes.
1. Press repeatedly to select the desired item. Each time you press the button, the item changes as follows: 2. Press repeatedly to select the setting. 3. Press . Without pressing the button for 10 seconds, the setting is finished ("Complete" is heard.
LED setting Format setting After "Format setting" is heard... 1. Press so that "Format" is heard, then press . "Please select `Start format' or `Cancel format'" is heard. When you do not press , the format setting is canceled and playback starts.
The following setting is cleared: The memory of the playback position, Playlist selection, the order of the Random play.
Troubleshooting Connection Transfer Playback Symptom Cause Action The PC cannot detect the Digital Audio Player. Your PC may work incorrectly. Restart your PC, then connect the Digital Audio Player again. Your PC needs the access permission from the Digital Audio Player.
Specification Design and specifications subject to change without notice. Memory type: 128 MB Flash memory Playable files: MP3, WMA, WMA - DRM (copyright - protected) Headphones driver unit: 30 mm diameter Neodymium Power supply: AAA alkaline battery (DC 1.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté JVC XA-A50CL c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du JVC XA-A50CL - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation JVC XA-A50CL, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le JVC XA-A50CL va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le JVC XA-A50CL, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du JVC XA-A50CL.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le JVC XA-A50CL. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei JVC XA-A50CL ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
