Manuel d'utilisation / d'entretien du produit UX-M3R du fabricant JVC
Aller à la page of 24
For Customer Use: Enter below the Model No . and Serial No. which are located either on the rear , bot- tom or side of the cabinet. Retain this inf or mation f or future reference . Model No . Se r ia l N o. LVT0808-005A [A] UX-M3R — Consists of CA-UXM3R and SP-UXM3.
Caution –– STANDBY/ON button! Disconnect the mains plug to shut the power off completely. The STANDBY/ON button in any position does not disconnect the mains line. The power can be remote controlled. IMPORTANT FOR LASER PRODUCTS REPRODUCTION OF LABELS 1 CLASSIFICATION LABEL, PLACED ON REAR ENCLOSURE 2 WARNING LABEL, PLACED INSIDE THE UNIT 1.
– G-2 – 15 cm 15 cm 15 cm 1 cm UX-M3R 1 cm 10 cm 15 cm 15 cm UX-M3R Caution: Proper Ventilation To avoid risk of electric shock and fire, and to prevent damage, locate the apparatus as follows: 1 Front: No obstructions and open spacing. 2 Sides/ Top/ Back: No obstructions should be placed in the areas shown by the dimensions below.
– 1 – Introduction W e would like to thank y ou for pur chasing one of our JVC pr oducts. Bef ore operating this unit, read this manual carefull y and thoroughl y to obtain the best possib le performance fr om your unit, and retain this manual f or future reference.
– 2 – Contents Location of the Buttons and Controls ..................... 3 Front Panel ................................................................ 4 Remote Control ......................................................... 5 Getting Started .
– 3 – Location of the Buttons and Controls Become familiar with the b uttons and controls on your unit. Front Panel DISPLA Y MODE PHONES PROGRAM REC STOP/CLEAR PLA Y/PA USE PRE EQ /HBS VOLUME REPE.
– 4 – Continued Front Panel See pages in the par entheses for details. 1 Disc compartment (13) 2 ST ANDBY/ON button (8) T urns the unit on or off (standby mode). 3 CD/RANDOM button (13, 14) Selects CD mode. Starts or stops random play in CD mode .
– 5 – Remote Control 1 ST ANDBY/ON button 2 CD/RANDOM button 3 TUNER/B AND button 4 REC (Recording) b utton 5 PR OGRAM button 6 REMAIN/RDS MODE button 7 INTR O/RDS SEARCH button 8 TIMER button 9 DISPLA Y MODE button p PRE EQ/HBS button q MUTING button Interrupts and r esumes sound r epr oduction.
– 6 – Continued Getting Started Unpacking After unpacking, check to be sure that you ha ve all the follo wing items. The number in the parentheses follo wing each item name indicates the supplied quantity .
– 7 – 2 Connect the supplied AM loop antenna to the AM LOOP terminal. Place the antenna aw ay from the unit and adjust its position for the best reception. 3 Adjust the position of the FM antenna f or the best r eception. 4 Connect the A C power cord of the unit to the A C outlet after all other connections ha ve been made.
– 8 – Common Operations T urning On or Off the Unit T o turn on the unit Press ST ANDBY/ON on the unit or remote control. The unit turns on with the last source selection remaining v alid. T o turn off the unit (on stanby) Press ST ANDBY/ON on the unit or remote control.
– 9 – Digital Sound Control The unit ’ s digital sound control feature enables you to select desired preset equalizer settings (selectable as sound modes) to enjoy special sound ef fects matching the m usic type. Y ou can also use the HBS (Hyper Bass Sound) system to enjoy po werful bass sound created by emphasizing low frequencies.
– 10 – T uning In a Station 1 When the unit is tur ned on, press TUNER/B AND to select tuner mode. The unit tunes in the last station tuned in (either FM or MW). 2 Pr ess TUNER/B AND to select the band, FM or MW . Each time you press the button, the band selection alternates between FM and MW .
– 11 – T uning In a Preset Station 1 Pr ess TUNER/B AND to select tuner mode. 2 Pr ess TUNER/B AND to select the band, FM or MW . 3 Pr ess PRESET ∞ or 5 (or PRE UP or REPEA T/PRE DO WN on the remote contr ol) to select the desir ed preset number .
– 12 – Receiving FM Stations with RDS RDS (Radio Data System) allo ws FM stations to send an additional signal along with their regular pr ogram signals. For e xample, the stations send their station names, as well as information about what type of program the y broadcast, such as sports or music, etc.
– 13 – Playing Back CDs This unit can play back audio CDs. Loading a Disc 1 Pr ess CD/RANDOM to select CD mode. 2 Pr ess 0 OPEN/CLOSE. The disc tray slides out. 3 Load a disc with the label side facing up. 4 Pr ess 0 OPEN/CLOSE to close the disc compartment.
– 14 – Random Play Y ou can play all the tracks in random order . Press CD/RANDOM bef ore or during playing. The RANDOM indicator lights up. T o exit random play mode, press CD/RANDOM again. The RANDOM indicator goes of f. • Acti vating the REPEA T ONE function during random play mode disables the random play mode.
– 15 – Playing Back T apes • Use only type I normal tapes. The use of tapes longer than 120 minutes is not recommended, since characteristic deterioration may occur and these tapes easily jam in the pinchroller and the capstan. Loading a T ape 1 Pr ess 0 EJECT to open the tape deck door .
– 16 – Recording Recording T apes 1 Load a recordab le tape into the tape deck. Insert a tape with the open side do wn and the side to be recorded facing out from the unit. 2 Press CD/RANDOM or TUNER/B AND to select the desir ed recording sour ce.
– 17 – Using the T imers There are three timers a vailable – daily timer , recording timer and sleep timer . Before using the timers, you need to set the built-in cloc k. (See page 8.) Using Daily Timer W ith the daily timer , you can wake to your fa vorite music or radio program.
– 18 – Using Sleep Timer W ith the sleep timer, y ou can fall asleep to music. Y ou can set the sleep timer using the remote control when the unit is turned on. How the sleep timer actually works The unit automatically turns of f after the specified time length passes.
– 19 – NEWS: News. AFF AIRS: T opical pr ogram e xpanding or enlarging upon the ne ws – debate, or analysis. INFO: Program the purpose of which is to impart advice in the widest sense. SPOR T : Pro gram concerned with any aspect of sports. EDUCA TE: Educational programs.
– 20 – Maintenance T o get the best perfor mance of the unit, keep your discs, tapes, and mechanism c lean. Cassette decks If the heads, capstan, and pinch roller of the cassette deck become dirty.
0202NNMMACORI EN Specifications Amplifier section Output power 24 W (12 W + 12 W) at 8 Ω (MAX.) 20 W (10 W + 10 W) at 8 Ω (10% THD) Audio output lev el PHONES: 800 mV/32 Ω Speakers/Impedance 8 Ω - 16 Ω T uner FM tuning range 87.50 MHz - 108.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté JVC UX-M3R c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du JVC UX-M3R - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation JVC UX-M3R, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le JVC UX-M3R va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le JVC UX-M3R, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du JVC UX-M3R.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le JVC UX-M3R. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei JVC UX-M3R ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
