Manuel d'utilisation / d'entretien du produit UX-H300 du fabricant JVC
Aller à la page of 86
LVT1193-007A [US] MICR O COMPONENT SYSTEM UX-H300 –Consists of CA-UXH300 and SP-UXH300 INSTR UCTIONS English UX-H300[US]cover3.p65 5/19/04, 11:52 AM 1.
G-1 W arnings, Cautions and Other s CA UTION— (ST ANDBY/ON) b utton! Disconnect the mains plug to shut the power off completely (all lamps and indications go off). The (STANDBY/ON) button in any position does not disconnect the mains line. • When the unit is on standby , the ST ANDBY lamp lights red.
G-2 IMPOR T ANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CA UTION: Do not open the top cov er . There are no user serviceable par ts inside the unit; leav e all ser vicing to qualified service personnel. 3. CA UTION: Visib le and invisible laser r adiation when open and interlock f ailed or defeated.
1 English Power sources • W hen unplugging the unit from the w all outlet, always pull on the plug, not the AC po wer cord. DO NO T handle the A C power cord with w et hands. Moisture condensation Moisture may condense on the lenses inside the unit in the following cases: • After starting to heat the room.
2 English Contents Location of the Buttons and Controls ............................. 3 Main Unit .................................................................................. 3 Remote Control .....................................................
3 English Location of the Buttons and Controls Become familiar with the b uttons and controls on your unit. Main Unit OPEN COMPACT DIGITAL AUDIO DAIL Y TIMER/SNOOZE 1 3 2 COMPACT DIGITAL AUDIO ST ANDB.
4 English Display window Display window 1 D AIL Y 1/2/3 (timer number) indicators 2 (timer) indicator 3 ON/OFF (timer on-time/of f-time) indicators 4 REC (recording timer) indicator 5 (group folder) i.
5 English Remote Control See pages in parentheses for details. COMPACT DIGITAL AUDIO ST ANDBY CD PHONES DOWN 4 # / 8 7¢ UP AUX T APE FM/AM AUX VOLUME + — REC When using the remote control, point it at the remote sensor on the front panel.
6 English Getting Started Unpacking After unpacking, check to be sure that you ha ve all the follo wing items. The number in parentheses indicates the quantity of each piece supplied. • AM loop antenna (1) • A C plug adaptor (1) • Remote control (1) • Batteries (2) If any item is missing, consult your dealer immediately .
7 English Connecting Other Equipment T o connect an audio equipment Y ou can connect audio equipment — used only as a playback de vice. • DO NO T connect any equipment while the power is on. • DO NO T plug in any equipment until all connections are complete.
8 English 1 2 3 AAA/UM-4/R03 Putting the Batteries into the Remote Control Insert the batteries — AAA/UM-4/R03 — into the remote control by matching the polarity (+ and – ) on the batteries with the + and – marking on the battery compartment. When the remote control can no longer operate the unit, replace both batteries at the same time.
9 English Common Operations Setting the Clock Before operating the unit any further , f irst set the unit ’ s c lock. When you plug in the po wer cord, “ 0:00 ” starts flashing on the display . Y ou can set the clock when the unit is either turned on or in standby mode.
10 English Selecting the Source T o select the source, press CD 6 , T APE 2 3 , FM/AM, or AU X . • When you select CD as the source, playback starts automatically . T o operate the CD player , see pages 11 to 14. T o operate the tape deck, see page 15.
11 English Playing Back the Entire Disc—Normal Play 1 Press ) OPEN on top of the unit. The disc cov er opens. • Y ou can insert a disc while listening to another source. 2 Place a disc corr ectly with its label side up. 3 Close the disc cov er gently .
12 English T o remove the disc , press ) OPEN on the unit, then take out the disc by holding it at the edges while pressing the unit ’ s piv ot lightly . • If the disc cannot be read corr ectly (because it is scratched, for e xample) or an unreadable CD-R or CD-R W is inserted Playback will not start.
13 English Repeating T racks — Repeat Play Y ou can hav e all the tracks, the program or indi vidual track currently playing, repeat as many times as you lik e.
14 English REMAIN Displaying the Remaining Time during Playback Y ou can display the remaining time of the current track/disc and the elapsed time of the current track/disc during playing.
15 English If no cassette is inserted when y ou press T APE ¤ ‹ “ NO T APE ” appears on the display . T o stop playing, press 7 . T o fast-wind to the left or to the right, press ¢ or 4 (or UP ¢ or DO WN 4 on the unit). The tape direction indicator ( 3 or 2 ) starts flashing rapidly on the display .
16 English T uning in to a Station 1 Pr ess FM/AM to select either “FM” or “AM. ” The unit automatically turns on and tunes in to the previously recei v ed station—either FM or AM. • Each time you pr ess the b utton, the band alternates between FM and AM.
17 English 123 456 78 0 9 OVER FM/AM PRESET GROUP PRESET GROUP UP DOWN 3 Pr ess PRESET GROUP or PRESET GROUP to select a preset n umber , then press SET . The preset station is stored in memory . • Even if you do not press SET , the station will automatically be stored on the selected preset number 5 seconds later .
18 English 3 Start playing the source — FM, AM, or auxiliary equipment connected to A UX jack. • When the source is FM or AM, tune in to the station you want to record. • When recording from discs, see “ Recording Discs — Disc Synchronized Recording ” on page 19.
19 English T o stop recording f or a moment, press REC. Both the CD playback and tape recording are paused. T o resume recording, pr ess T APE ¤ ‹ . T o stop recording, press 7 . The recording stops and the CD playback is paused. T o record on both sides — Reverse Mode On the r emote control ONL Y : Press REV .
20 English Using the T imers There are four timers a vailable — Daily T imer , Recording T imer , Snooze T imer, and Sleep T imer . • Before using these timers, make sure the b uilt-in clock is set correctly (see page 9). Using Daily Timer and Recor ding Timer Y ou can set the timer whether the unit is on or of f.
21 English 3 F or the Recording Timer ONL Y : Set the off-time y ou want the unit to tur n off. (1) Press UP or DO WN to set the hour , then press SET . (2) Press UP or DO WN to set the minute, then press SET . If you want to change the time setting, press CANCEL.
22 English Using Sleep T imer W ith Sleep T imer, you can fall asleep to your f av orite music or radio program. • Y ou can set Sleep T imer only when the unit is turned on. • Y ou can also turn off the unit automatically by using Auto Standby . (See page 9.
23 English Maintenance T o get the best perfor mance of the unit, keep your discs, tapes and mechanism clean. General Notes In general, you will hav e the best performance by keeping your discs, tapes and the mechanism clean. • Store discs and tapes in their cases, and keep them in cabinets or on shelves.
24 English If you are ha ving a problem with your unit, check this list for a possible solution before calling for ser vice. If you cannot solve the problem from the hints gi ven here, or the unit has been ph ysically damaged, call a qualif ied person, such as your dealer for service.
EN, CS 0504AIMMDWORI © 2004 VICTOR COMPANY OF JAPAN, LIMITED VICT OR COMP ANY OF JAP AN, LIMITED AC 110-127V VOL TAGE SELECTOR AC 220-240V AC 110-127V VOL T AGE SELECTOR AC 220-240V Mains (A C) Line Instruction (not applicable f or Eur ope, U .S.A., Canada, A ustralia, and U .
LVT1193-011A [UW] MICR O COMPONENT SYSTEM SISTEMAS DE MICR OCOMPONENTES SISTEMA DE MICR O COMPONENTES UX-H330 UX-H300 –Consists of CA-UXH330 and SP-UXH330 –Consists of CA-UXH300 and SP-UXH300 INSTR UCTIONS MANU AL DE INSTRUCCIONES INSTRU ÇÕ ES English Español Português UX-H330&H300[UW]cover2.
G-1 W arnings, Cautions and Other s A visos, precauciones y otras notas Advertências, precauções e outras notas CA UTION— (ST ANDBY/ON) button! Disconnect the mains plug to shut the power off completely (all lamps and indications go off). The (STANDBY/ON) button in any position does not disconnect the mains line.
G-2 CA UTION • Do not bloc k the ventilation openings or holes. (If the ventilation openings or holes are b lock ed by a newspaper or cloth, etc., the heat ma y not be able to get out.) • Do not place any nak ed flame sources, such as lighted candles, on the apparatus .
G-3 Front vie w Vista frontal Vista frontal CA UTION: Proper V entilation T o avoid risk of electric shock and fire , and to prev ent damage, locate the apparatus as f ollows: 1 F ront: No obstructions and open spacing. 2 Sides/ T op/ Back: No obstructions should be placed in the areas shown b y the dimensions below .
G-4 IMPORT ANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CA UTION: Do not open the top cov er . There are no user ser viceab le par ts inside the unit; leav e all servicing to qualified ser vice personnel. 3. CA UTION: Visible and in visible laser radiation when open and interlock f ailed or defeated.
1 English Power sources • W hen unplugging the unit from the w all outlet, always pull on the plug, not the AC po wer cord. DO NO T handle the A C power cord with w et hands. Moisture condensation Moisture may condense on the lenses inside the unit in the following cases: • After starting to heat the room.
2 English Contents Location of the Buttons and Controls ............................. 3 Main Unit .................................................................................. 3 Remote Control .....................................................
3 English Location of the Buttons and Controls Become familiar with the b uttons and controls on your unit. Main Unit OPEN COMPACT DIGITAL AUDIO DAIL Y TIMER/SNOOZE 1 3 2 COMPACT DIGITAL AUDIO ST ANDB.
4 English Display window Display window 1 D AIL Y 1/2/3 (timer number) indicators 2 (timer) indicator 3 ON/OFF (timer on-time/of f-time) indicators 4 REC (recording timer) indicator 5 (group folder) i.
5 English Remote Control See pages in parentheses for details. COMPACT DIGITAL AUDIO ST ANDBY CD PHONES DOWN 4 # / 8 7¢ UP AUX T APE FM/AM AUX VOLUME + — REC When using the remote control, point it at the remote sensor on the front panel.
6 English Getting Started Unpacking After unpacking, check to be sure that you ha ve all the follo wing items. The number in parentheses indicates the quantity of each piece supplied. • AM loop antenna (1) • A C plug adaptor (1) • Remote control (1) • Batteries (2) If any item is missing, consult your dealer immediately .
7 English Connecting Other Equipment T o connect an audio equipment Y ou can connect audio equipment — used only as a playback de vice. • DO NO T connect any equipment while the power is on. • DO NO T plug in any equipment until all connections are complete.
8 English 1 2 3 AAA/UM-4/R03 Putting the Batteries into the Remote Control Insert the batteries — AAA/UM-4/R03 — into the remote control by matching the polarity (+ and – ) on the batteries with the + and – marking on the battery compartment. When the remote control can no longer operate the unit, replace both batteries at the same time.
9 English Common Operations Setting the Clock Before operating the unit any further , f irst set the unit ’ s c lock. When you plug in the po wer cord, “ 0:00 ” starts flashing on the display . Y ou can set the clock when the unit is either turned on or in standby mode.
10 English Selecting the Source T o select the source, press CD 6 , T APE 2 3 , FM/AM, or AU X . • When you select CD as the source, playback starts automatically . T o operate the CD player , see pages 11 to 14. T o operate the tape deck, see page 15.
11 English Playing Back the Entire Disc—Normal Play 1 Press ) OPEN on top of the unit. The disc cov er opens. • Y ou can insert a disc while listening to another source. 2 Place a disc corr ectly with its label side up. 3 Close the disc cov er gently .
12 English T o remove the disc , press ) OPEN on the unit, then take out the disc by holding it at the edges while pressing the unit ’ s piv ot lightly . • If the disc cannot be read corr ectly (because it is scratched, for e xample) or an unreadable CD-R or CD-R W is inserted Playback will not start.
13 English Repeating T racks — Repeat Play Y ou can hav e all the tracks, the program or indi vidual track currently playing, repeat as many times as you lik e.
14 English REMAIN Displaying the Remaining Time during Playback Y ou can display the remaining time of the current track/disc and the elapsed time of the current track/disc during playing.
15 English If no cassette is inserted when y ou press T APE ¤ ‹ “ NO T APE ” appears on the display . T o stop playing, press 7 . T o fast-wind to the left or to the right, press ¢ or 4 (or UP ¢ or DO WN 4 on the unit). The tape direction indicator ( 3 or 2 ) starts flashing rapidly on the display .
16 English T uning in to a Station 1 Pr ess FM/AM to select either “FM” or “AM. ” The unit automatically turns on and tunes in to the previously recei v ed station—either FM or AM. • Each time you pr ess the b utton, the band alternates between FM and AM.
17 English 123 456 78 0 9 OVER FM/AM PRESET GROUP PRESET GROUP UP DOWN 3 Pr ess PRESET GROUP or PRESET GROUP to select a preset n umber , then press SET . The preset station is stored in memory . • Even if you do not press SET , the station will automatically be stored on the selected preset number 5 seconds later .
18 English 3 Start playing the source — FM, AM, or auxiliary equipment connected to A UX jack. • When the source is FM or AM, tune in to the station you want to record. • When recording from discs, see “ Recording Discs — Disc Synchronized Recording ” on page 19.
19 English T o stop recording f or a moment, press REC. Both the CD playback and tape recording are paused. T o resume recording, pr ess T APE ¤ ‹ . T o stop recording, press 7 . The recording stops and the CD playback is paused. T o record on both sides — Reverse Mode On the r emote control ONL Y : Press REV .
20 English Using the T imers There are four timers a vailable — Daily T imer , Recording T imer , Snooze T imer, and Sleep T imer . • Before using these timers, make sure the b uilt-in clock is set correctly (see page 9). Using Daily Timer and Recor ding Timer Y ou can set the timer whether the unit is on or of f.
21 English 3 F or the Recording Timer ONL Y : Set the off-time y ou want the unit to tur n off. (1) Press UP or DO WN to set the hour , then press SET . (2) Press UP or DO WN to set the minute, then press SET . If you want to change the time setting, press CANCEL.
22 English Using Sleep T imer W ith Sleep T imer, you can fall asleep to your f av orite music or radio program. • Y ou can set Sleep T imer only when the unit is turned on. • Y ou can also turn off the unit automatically by using Auto Standby . (See page 9.
23 English Maintenance T o get the best perfor mance of the unit, keep your discs, tapes and mechanism clean. General Notes In general, you will hav e the best performance by keeping your discs, tapes and the mechanism clean. • Store discs and tapes in their cases, and keep them in cabinets or on shelves.
24 English If you are ha ving a problem with your unit, check this list for a possible solution before calling for ser vice. If you cannot solve the problem from the hints gi ven here, or the unit has been ph ysically damaged, call a qualif ied person, such as your dealer for service.
EN, SP, PR 0504AIMMDWORI © 2004 VICTOR COMPANY OF JAPAN, LIMITED VICT OR COMP ANY OF JAP AN, LIMITED AC 110-127V VOL TAGE SELECTOR AC 220-240V AC 110-127V VOL T AGE SELECTOR AC 220-240V Mains (A C) Line Instruction (not applicable f or Eur ope, U .S.
LVT1193-012A [UJ] MICR O COMPONENT SYSTEM UX-H350 –Consists of CA-UXH350 and SP-UXH350 INSTR UCTIONS UX-H350[UJ]cover2.p65 5/19/04, 11:32 AM 1.
G-1 W arnings, Cautions and Other s CA UTION— (ST ANDBY/ON) button! Disconnect the mains plug to shut the power off completely (all lamps and indications go off). The (STANDBY/ON) button in any position does not disconnect the mains line. • When the unit is on standby , the ST ANDBY lamp lights red.
G-2 IMPORT ANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CA UTION: Do not open the top cov er . There are no user ser viceab le par ts inside the unit; leav e all ser vicing to qualified ser vice personnel. 3. CA UTION: Visib le and invisible laser r adiation when open and interlock f ailed or defeated.
1 Power sources • W hen unplugging the unit from the w all outlet, always pull on the plug, not the AC po wer cord. DO NO T handle the A C power cord with w et hands. Moisture condensation Moisture may condense on the lenses inside the unit in the following cases: • After starting to heat the room.
2 Contents Location of the Buttons and Controls ............................. 3 Main Unit .................................................................................. 3 Remote Control .............................................................
3 Location of the Buttons and Controls Become familiar with the b uttons and controls on your unit. Main Unit OPEN COMPACT DIGITAL AUDIO DAIL Y TIMER/SNOOZE 1 3 2 COMPACT DIGITAL AUDIO ST ANDBY CD PHO.
4 Display window Display window 1 D AIL Y 1/2/3 (timer number) indicators 2 (timer) indicator 3 ON/OFF (timer on-time/of f-time) indicators 4 REC (recording timer) indicator 5 (group folder) indicator.
5 Remote Control See pages in parentheses for details. COMPACT DIGITAL AUDIO ST ANDBY CD PHONES DOWN 4 # / 8 7¢ UP AUX T APE FM/AM AUX VOLUME + — REC When using the remote control, point it at the remote sensor on the front panel.
6 Getting Started Unpacking After unpacking, check to be sure that you ha ve all the follo wing items. The number in parentheses indicates the quantity of each piece supplied. • AM loop antenna (1) • A C plug adaptor (1) • Remote control (1) • Batteries (2) If any item is missing, consult your dealer immediately .
7 Connecting Other Equipment T o connect an audio equipment Y ou can connect audio equipment — used only as a playback de vice. • DO NO T connect any equipment while the power is on. • DO NO T plug in any equipment until all connections are complete.
8 1 2 3 AAA/UM-4/R03 Putting the Batteries into the Remote Control Insert the batteries — AAA/UM-4/R03 — into the remote control by matching the polarity (+ and – ) on the batteries with the + and – marking on the battery compartment. When the remote control can no longer operate the unit, replace both batteries at the same time.
9 Common Operations Setting the Clock Before operating the unit any further , f irst set the unit ’ s c lock. When you plug in the po wer cord, “ 0:00 ” starts flashing on the display . Y ou can set the clock when the unit is either turned on or in standby mode.
10 Selecting the Source T o select the source, press CD 6 , T APE 2 3 , FM/AM, or AU X . • When you select CD as the source, playback starts automatically . T o operate the CD player , see pages 11 to 14. T o operate the tape deck, see page 15. T o operate the tuner (FM or AM), see pages 16 and 17.
11 Playing Back the Entire Disc—Normal Play 1 Press ) OPEN on top of the unit. The disc cov er opens. • Y ou can insert a disc while listening to another source. 2 Place a disc corr ectly with its label side up. 3 Close the disc cov er gently . 4 Press CD 6 .
12 T o remove the disc , press ) OPEN on the unit, then take out the disc by holding it at the edges while pressing the unit ’ s piv ot lightly . • If the disc cannot be read corr ectly (because it is scratched, for e xample) or an unreadable CD-R or CD-R W is inserted Playback will not start.
13 Repeating T racks — Repeat Play Y ou can hav e all the tracks, the program or indi vidual track currently playing, repeat as many times as you lik e.
14 REMAIN Displaying the Remaining Time during Playback Y ou can display the remaining time of the current track/disc and the elapsed time of the current track/disc during playing.
15 If no cassette is inserted when y ou press T APE ¤ ‹ “ NO T APE ” appears on the display . T o stop playing, press 7 . T o fast-wind to the left or to the right, press ¢ or 4 (or UP ¢ or DO WN 4 on the unit). The tape direction indicator ( 3 or 2 ) starts flashing rapidly on the display .
16 T uning in to a Station 1 Pr ess FM/AM to select either “FM” or “AM. ” The unit automatically turns on and tunes in to the previously recei v ed station—either FM or AM. • Each time you pr ess the b utton, the band alternates between FM and AM.
17 123 456 78 0 9 OVER FM/AM PRESET GROUP PRESET GROUP UP DOWN 3 Pr ess PRESET GROUP or PRESET GROUP to select a preset n umber , then press SET . The preset station is stored in memory . • Even if you do not press SET , the station will automatically be stored on the selected preset number 5 seconds later .
18 3 Start playing the source — FM, AM, or auxiliary equipment connected to A UX jack. • When the source is FM or AM, tune in to the station you want to record. • When recording from discs, see “ Recording Discs — Disc Synchronized Recording ” on page 19.
19 T o stop recording f or a moment, press REC. Both the CD playback and tape recording are paused. T o resume recording, pr ess T APE ¤ ‹ . T o stop recording, press 7 . The recording stops and the CD playback is paused. T o record on both sides — Reverse Mode On the r emote control ONL Y : Press REV .
20 Using the T imers There are four timers a vailable — Daily T imer , Recording T imer , Snooze T imer, and Sleep T imer . • Before using these timers, make sure the b uilt-in clock is set correctly (see page 9). Using Daily Timer and Recor ding Timer Y ou can set the timer whether the unit is on or of f.
21 3 F or the Recording Timer ONL Y : Set the off-time y ou want the unit to tur n off. (1) Press UP or DO WN to set the hour , then press SET . (2) Press UP or DO WN to set the minute, then press SET . If you want to change the time setting, press CANCEL.
22 Using Sleep T imer W ith Sleep T imer, you can fall asleep to your f av orite music or radio program. • Y ou can set Sleep T imer only when the unit is turned on. • Y ou can also turn off the unit automatically by using Auto Standby . (See page 9.
23 Maintenance T o get the best perfor mance of the unit, keep your discs, tapes and mechanism clean. General Notes In general, you will hav e the best performance by keeping your discs, tapes and the mechanism clean. • Store discs and tapes in their cases, and keep them in cabinets or on shelves.
24 If you are ha ving a problem with your unit, check this list for a possible solution before calling for ser vice. If you cannot solve the problem from the hints gi ven here, or the unit has been ph ysically damaged, call a qualif ied person, such as your dealer for service.
EN 0504AIMMDWORI © 2004 VICTOR COMPANY OF JAPAN, LIMITED VICT OR COMP ANY OF JAP AN, LIMITED Mains (A C) Line Instruction (not applicable f or Eur ope, U .
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté JVC UX-H300 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du JVC UX-H300 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation JVC UX-H300, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le JVC UX-H300 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le JVC UX-H300, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du JVC UX-H300.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le JVC UX-H300. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei JVC UX-H300 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
