Manuel d'utilisation / d'entretien du produit SR-DVM700U du fabricant JVC
Aller à la page of 88
DV H DD DV D DVD TV PR/CH INPUT SELECT PA USE REC REC MODE/ REMAIN DISPLAY ON SCREEN AUDIO SUBTITLE ANGLE/ EE CHECK PROGRESSIVE SCAN SLOW SLOW PLAY STOP/CLEAR NAVIGA TION TOP MENU RETURN ENTER MENU ST.
2 EN SAFETY FIRST Cautions CLASS 1 LASER PRODUCT REPRODUCTION OF LABELS W ARNING LABEL INSIDE OF THE UNIT OR This unit apply to the standard A IEC60825-1:2001 B for l as e r products. Dear Customer , Thank you f or purchasing the JVC Mini D V & HDD & D VD video recorder .
EN 3 SAFETY FIRST IMPORTANT PRODUCT SAFETY INSTRUCTIONS Electrical energy can perf or m many useful functions. But improper use can result in potential electrical shock or fire hazards. This product has been engineered and manuf actured to assure your personal safety .
4 EN SAFETY FIRST USE 1. Accessories T o avoid personal injury: ● Do not place this product on an unstable car t, stand, tripod, brack et, or table. It ma y fall, causing serious injury to a child or adult, and serious damage to the product.
EN 5 SAFETY FIRST ● Manuf a ctured under license from Dolby Laboratories . A Dolby B and the double-D symbol are trademarks of Dolby Laboratories. ● A DTS B and A DTS DIGIT AL OUT B are trademarks of Digital Theater Systems, Inc. ● This unit can play bac k and record on ly NTSC signals.
6 EN CONTENTS SAFETY FIRST 2 DISC INFORMATION 7 About Discs ........... ......................................................................... 7 Life Span Of Parts . ....................................................................... 11 INDEX 12 INSTALLING YOUR NEW UNIT 18 Basic Connections .
EN 7 DISC INFORMA TION Recordable/Playable Discs Y ou can use discs with the fo llowing logos for recording and playbac k. ● The above tab le is based o n the inf or mation as of June 2006. ● Recording and playback ma y not be performed depending on the characteristics and condition of the disc used, leading to unsatisfactory results.
8 EN DISC INFORMA TION Discs For Playback Only Y ou can use discs with the f ollowing logos for pla yback only . ● Playbac k may not be performed depending on the characteristics and condition of the disc used. ● DTS Audio CDs can also be pla yed back (An optional DTS decoder is required).
EN 9 DISC INFORMA TION Recording Medium And Format DV D -R A M ● Recording and erasing can be performed as many times as possible on a disc. ● Editing can be performed after recording, such as deleting unwanted par ts.
10 EN DISC INFORMA TION DVD VIDEO Marks Sometimes marks are pr inted on a D VD disc and/or on its packaging to indicate inf or mation regarding the contents and functions of the disc.
EN 11 DISC INFORMA TION Care And Handling Of Discs How to handle discs When handling a disc, do not touch the surface of the disc. Since discs are made of plastic, the y are easily damaged. If a disc gets dir ty , dusty , scratched or warped, the images and sound will not be pick ed up correctly , and such a disc may cause the unit to malfunction.
12 EN INDEX Front View A ST ANDBY/ON Button ( A ) B Eject Button ( M ) (D V) A pg. 33 C Mini D V Cassette Loading Slot D DV L am p ( DV ) A pg. 33 D V Recording Lamp (REC) E HDD Lamp (HDD) A pg . 20 HDD Recording Lamp (REC) F DV D La m p ( DV D ) A pg.
EN 13 INDEX Rear View A AC Pow e r C or d A pg. 18 B Cooling Fan ● This prev ents the temperature from r ising inside the unit. Do not remov e it. ● Install the unit so as not to bloc k the area around the fan. ● The unit may become hot when it is turned off, as the cooling fan on the rear of the unit is not activ ated.
14 EN INDEX Front Display Panel A Disc T ype Indicato r When a disc is loaded, the type of the disc is indicated. Disc Status Indicator When a disc is running, the disc mar ks rotate. VR Mode Indicator (VR) A pg. 63 Lights when a D VD-R/RW disc is f or matted in VR mode.
EN 15 INDEX Remote Control A Output Select Button (OUTPUT SELECT) ● Switches betwe en A ALL B (D V/HDD/D VD output) and A DV B (D V output) when pressed. When A ALL B is selected, D V , HDD or D VD signals are output from the [D V/HDD/D VD OUTPUT] connectors on the rear panel depending on the deck selected.
16 EN INDEX On-Screen Display (HDD & DVD deck) When A SUPERIMPOSE B is set to A ON B or A AU T O B and ON SCREEN on the remote control is pressed, various operational indicators appear on the TV screen. T o clear the operational indicators, press ON SCREEN twice.
EN 17 INDEX On-Screen Display (DV Dubbing) When capturing images from the external DV equipment A Recording speed B HDD capacity graph C HDD time counter D Recording time scale E HDD mode F Remote con.
18 EN INST ALLING YOUR NEW UNIT It’ s essential that your unit be proper ly connected. Connecting to a TV Monitor Connect the unit to a TV depending on the TV and cables y ou use.
EN 19 INITIAL SETTINGS 1 Press SET UP to acce ss the Main Menu screen. 2 Press selection keys to select A INITIAL SET UP B , then press G . 3 Press selection keys to se lect A CLOCK SET B , then press G . 4 Press selection keys to se lect A TIME B , then press ENTER .
20 EN INITIAL SETTINGS On-screen Language Set This unit offers y ou the choice to vie w on-screen messages in 3 different languages . 1 Press HDD or DV D so that the HDD or D VD lamp lights up on the unit. 2 Press SET UP to acce ss the Main Menu screen.
EN 21 INITIAL SETTINGS Y ou can select the monitor type depending on the TV used when you pla y back D VD VIDEO discs recorded f or wide-screen TVs. 1 Press DV D so that the D VD lamp lights up on th e unit. 2 Press SET UP to acce ss the Main Menu screen.
22 EN BASIC OPERA TIONS ON DVD DECK T o play back an MP3/JPE G disc, see A Pla yback With MP3/WMA/ JPEG Navigation B ( A pg. 45). 1 Load a disc. ● F or details, ref er to A Placing A Disc B ( A pg. 10). ● Pressing I also closes the disc tra y . ● Playbac k begins automatically if an auto-playback D VD disc is loaded.
EN 23 BASIC OPERA TIONS ON DVD DECK Locating A Desired Scene Using The DVD Menu D VD VIDEO discs ma y hav e top menu and disc menu. To p m e n u D VD discs generally hav e their own menus which show the disc contents. These menus contain various items such as titles of a movie, names of songs, or artist information.
24 EN BASIC OPERA TIONS ON DVD DECK Skip Search During playback, press v . ● Each press initiates an approximately 30-second period of f ast- motion playbac k. Nor mal playback resumes automatically . ● Skip search cannot be performed when a VCD/SVCD disc is being play ed b ack with the PBC function.
EN 25 BASIC OPERA TIONS ON DVD DECK Marking Positions To Play Back Again Later It is possible to mark positions (up to 999 points) where you want to play bac k once again later, and start playback from a marked position.
26 EN BASIC OPERA TIONS ON DVD DECK Subtitle Selection Some D VD VIDEO discs contain more than one subtitle language, from among which you can choose the desired subtitle language. A h B appears on the TV screen at the beginning of the par t where more than one subtitle language are recorded.
EN 27 BASIC OPERA TIONS ON DVD DECK The on-screen bar allows you to control v ar ious pla yback functions. Some of the functions operated on Navigation Men u can be controlled on the On-screen bar . How To Access The On-screen Bar 1 Press ON SCREEN twice whene ver a disc is loaded.
28 EN BASIC OPERA TIONS ON DVD DECK DV D -R A M / RW / R OFF : Repeat playbac k is not p erf or med. ALL REPEA T : The whole disc is play ed back repeatedly . TITLE REPEA T : The current title is play ed back repeatedly . DV D V ID E O OFF : Repeat playbac k is not p erf or med.
EN 29 BASIC OPERA TIONS ON DVD DECK Time Search Y ou can play bac k a disc from the desire d point by specifying the elapsed playing time from the beginning of a program (D VD-RAM, D VD-R, D VD-RW , D V D VIDEO and H DD) or a disc (Video CD/ SVCD and Audio CD).
30 EN BASIC OPERA TIONS ON DVD DECK Setting The Progressive Mode Y ou can obtain optimal picture quality by selecting whether the content on the disc is processed by field (video source) or by frame (film source). 1 Set the unit to the progressive scan mode.
EN 31 BASIC OPERA TIONS ON HDD DECK 1 Press DV/ H D D / DV D on the unit repeatedly or HDD on the remote so that the HDD lamp lights up on the unit. 2 Press I to star t playbac k. ● The Librar y Database Navigation also enab les you to search and select the desired programs.
32 EN BASIC OPERA TIONS ON HDD DECK Instant Replay Y ou can mov e back the pla yback position slightly . Press w on the remote control or INST ANT REPLA Y on the unit. ● Each press skips back for appro ximately 7 seconds and resumes playbac k. ● Pressing while paused skips back for appro ximately 7 seconds and resumes pause.
EN 33 BASIC OPERA TIONS ON DV DECK 1 Load a cassette. Make sure the window side is up , the rear label side is facing y ou and the arrow on the front of the cassette is pointed toward the unit. ● Do not apply too much pressure when inser ting. ● If the erase protection switch is set to A SA VE B , playback begins automatically .
34 EN BASIC OPERA TIONS ON DV DECK Variable Speed Search During playback, press N f or forw ard v ariable speed search, or O fo r rev erse variable speed search. ● Each press of the button increases the search speed f or each direction. ● T o re sume normal playback, press I .
EN 35 LIVE MEMORY PLA YBA CK ON HDD/DVD DECK This unit records pictures onto the hard disk and D VD-RAM disc, instead of video tapes, then plays bac k the pictures recorded on the disc.
36 EN LIVE MEMORY PLA YBA CK ON HDD/DVD DECK Buttons To Be Used During Live Memory Playback A NA VIGA TION Displays Libr ary D atabase Navigation menu. Y ou can choose a title to play bac k. B S ● Pressing once skips back to the beginning of the chapter being play ed back.
EN 37 LIVE MEMORY PLA YBA CK ON HDD/DVD DECK Temporary recording for Live Memory (HDD deck only) This unit automatically records the A V input being received, within the specified range of time, to the reserved space on the hard disk. The time range can be set for 30 minutes , 1 hour , and 3 hours.
38 EN NA VIGA TION ON HDD/DVD DECK The Library Databa se Navigation enab les you to search and select the desired titles recorded on the HDD deck and the D VD deck ver y e as i ly . Y ou can record up to 99 titles on a disc. Each time a title is recorded, the information of the title is registered for the Library Database Navigation automatically .
EN 39 NA VIGA TION ON HDD/D VD DECK Scan For Beginning Of Title Y ou can scan the beginning of the t itle easily with the Library Database Navigation. 1 Press NA VIGA T ION . The Library Database Navigation screen appears. 2 Press selection keys to select A ORIGINAL B , then press ENTER .
40 EN NA VIGA TION ON HDD/DVD DECK Modify Category 1 P erform steps 1 – 4 of A Modify Index B ( A pg. 39) before continuing. 2 Press selection keys to select A CA TEGORY B , then press ENTER . 3 Press selection keys to select the desired categor y , then press ENTER .
EN 41 NA VIGA TION ON HDD/D VD DECK Divide Title (HDD deck only) Y ou can divide titles that are recorded continuously . 1 Press EDIT . The Editing screen appears. 2 Press selection keys to select A DIVIDE B , then press ENTER . 3 Press selection keys to select a title to divide, then press ENTER .
42 EN NA VIGA TION ON HDD/DVD DECK Play List It is a collection of the scenes. A play list can be freely edited and play ed back without e ver changing an y or iginal recording data.
EN 43 NA VIGA TION ON HDD/D VD DECK Add scenes 1 P erform steps 1 – 5 of A Edit Scenes B ( A pg. 42) before continuing. 2 Press selection keys to select A SEL. TITLE B , then press ENTER . 3 P erform steps 4 – 11 of A Create Pla y List B ( A pg. 42).
44 EN NA VIGA TION ON HDD/DVD DECK Title information can be registered in the unit’ s memor y for up to 600 D VD discs, 2,000 titles. It is helpful when finding a desired title (or play list) b y sor ting according to the sor t options registered during (or after) reco rding.
EN 45 NA VIGA TION ON HDD/D VD DECK This unit can play bac k discs that MP3/WMA sound files and JPEG image files taken with digital still cameras or other de vices are recorded. The MP3/WMA/JPEG Navigation enab les you to search and select the desired files recorded on CD-R/RW or CD-R OM discs very easily .
46 EN EDITING High Speed Dubbing (From HDD To DVD) It is possible to dub the original recordings and/o r pla y lists on the HDD deck to D VD discs. The dub bing is performed in high speed, keeping the original transf er rate. NOTES: ● After accessing the Dubbing Menu screen, it is not possible to take out a disc.
EN 47 EDITING NOTES: ● In Video mode, if the selected play list includes the scenes recorded in the different tr ansfer rate, the dub bing is performed in the highest transfer rate of the scenes in the selected pla y list. Howe ver , the lower transf er rate cannot be dubbed in the higher transfer rate .
48 EN EDITING Dubbing From DV To HDD (Dubbing An Entire Cassette) It is possible to perform automatic dubbing of all the recorded programs of a cassette from the D V deck to the HDD deck using the A ENTIRE B dubbing. Y o u cannot select the images to be dubbed; all recorded images on the D V cassette will be dubbed.
EN 49 EDITING COMPLETED B appears on the TV screen when the tape end is reached and the tape rewinds automatically . ● Dubbing copyright guarded tape is not possible .
50 EN EDITING Y ou can dub programs from a camcorder or D V equipment connected to the unit with a D V cable . The unit’ s remote control allows y ou the limited control of the connected camcorder or D V equipment functions during dubbing.
EN 51 EDITING ● If the dubbing is paused while the channel is set to A DV B , y ou cannot switch channels . T o skip un wanted part o f the source picture Press ENTER to stop both equipment, then press s election keys to select . Locate the point where you want to restart dubbing by pressing I , N , or O , then press o .
52 EN EDITING Y ou can use a camcorder as the source pla yer and your unit as the recording deck. If y our camcorder has a D V IN/OUT connector, y ou can use the camcorder as the recording deck and your unit as the source play er . 1 Make connections .
EN 53 EDITING Y ou can use your unit as the source pla yer or as the recording deck. 1 Make connections . A When using your unit as the source pla yer : ^ connect its [S-VIDEO/VIDEO/A UDIO OUTPUT] connectors to the input connectors on another recorder .
54 EN EDITING Y ou can dub programs recorded in D V mode on the HD D deck to a camcorder or D V equipment. 1 Connect the camcorder or D V equipment’ s D V input connector to the unit’ s [D V IN/OUT] connector. 2 Press D V/H DD/D VD on the unit repeatedly or HDD on the remote so that the HDD lamp lights up on the u nit.
EN 55 EDITING Y ou can dub selected audio from a D VD or Audio CD disc to a digital audio device . Howe ver , it is not possible to dub cop y-protected discs. Example: Dubbing to an MD 1 Connect the unit and a digital audio device using either an optional optical cable or an optional coaxial cable .
56 EN EDITING This function allows you to record ne w audio , without erasing the original audio, on a D V tape that was recorded with A D V AUDIO REC B set to A 12BIT B ( A pg. 62). 1 Connect an audio device to the unit’ s [AUDIO] input connectors on the front panel.
EN 57 EDITING Inser t Editing replaces the pictures with new ones, while the audio soundtrack remains unchanged. F or Inser t Editing, use your unit as the recording deck.
58 EN REMOTE CONTROL Remote Control 1/2/3/4 Code Switching The remote control is capable of controlling four JVC video units independently . Each of the units can respond to one of the f our codes (1, 2, 3 or 4). The remote control is preset to send co de 3 signals because your unit is initially set to respond to code 3 signals.
EN 59 SYSTEM CONNECTIONS These instructions en ab le you to connect y our unit to a Dolby Digital Decoder or an amplifier with built-in DTS. 1 Connect the unit and a Dolby Digital Decoder or an amplifier with built-in DTS using either an optional optical cab le or an optional coaxial cable.
60 EN SUBSIDIARY SETTINGS V arious modes of this unit are categorized into menus nested in 2 lev els shown in the following tab le. T o change the settings of these modes, find the desired mode in the menu (f or details on each menu, see pages 60 through 62), then f ollow the procedure below .
EN 61 SUBSIDIARY SETTINGS DISC PLAY SET UP 8 RESUME ^ OFF / ON / DISC RESUME When this function is set to A ON B or A DISC RESUME B , you can use the resume function. ( A pg. 24) OFF : Y ou cannot use the resume function. ON : Y ou can star t playback from the resume point of the placed disc.
62 EN SUBSIDIARY SETTINGS 8 QUICK ST ARTUP ^ OFF / ON When this function is set to A ON B , operations such as pla yback can be performed more quickly upon turning on the unit than whe n set to A OFF B . Howe ver , the power consumption during standby increases.
EN 63 SUBSIDIARY SETTINGS Some D VD-RAM/RW discs are unf or matted. F ormat th e disc when you use an unf or matted disc or you w ant to delete all recordings and data on the disc. T o use a D VD-R disc in VR mode, f ormat the new disc in VR mode. (It will be in Video mode when not formatted.
64 EN SUBSIDIARY SETTINGS Finalizing D VD-R/R W discs recorded on this unit makes it possible for the discs to be pla yed back on other D VD play ers. D VD-RW discs are finalized in the mode that the discs were f or matted, enabling pla yback on compatible D VD play ers.
EN 65 SUBSIDIARY SETTINGS Cancel The Finalization Of A DVD-RW Disc 1 Load a D VD-RW disc to cancel the disc finalization, and perf orm steps 1 – 2 of A Finalize A D VD-R/RW Disc B ( A pg. 64) before continuing. 2 Press selection keys to select A HDD/D VD SET UP B , then press G .
66 EN SUBSIDIARY SETTINGS This function allows you to replace the original backgrounds av ailable on this unit with your own created bac kgrounds. Up to 18 backgrounds can be replaced. Besides the background, y ou can also change the text color to impro ve the visibility of the text on a dark background.
EN 67 SUBSIDIARY SETTINGS Y ou can select a desired background from the 18 original backgrounds or the bac kgrounds and/or text colors that you ha ve created ( A pg. 66), and set it as the default bac kground to be used during finalization ( A pg. 46, 64).
68 EN SUBSIDIARY SETTINGS If you connect the unit and TV with Component Video Connection ( A pg. 18), you can select the scan mode from two modes: Interlaced scan mode which is used in the conventional TV system, and Progressiv e sca n mode which enables reproduction of higher-quality images.
EN 69 TROUBLESHOOTING Before requesting service for a prob lem, u se this char t and see if you can solv e the trouble yourself . Small problems are often easily solved, and this can sa ve y ou the trouble of sending your unit off f or repair .
70 EN TROUBLESHOOTING ● A finalized D VD-R disc is loaded. ] Recording cannot be made on finalized discs. Load a recordable disc on the unit. ● The disc is full or does not hav e enough space for the title to be recorded. ] Clear unnecessar y titles on the disc or load a blank disc.
EN 71 TROUBLESHOOTING On-screen Message (HDD & DVD Deck Only) ● A disc that is not registered in the librar y has been inser ted. Register the disc as necessar y . ( A pg. 44) ● Recording and/or editing cannot be performed. ● The number of titles e xceeds 99.
72 EN APPENDIX Language Code List AA Afar IN Indonesian R U Russian AB Abkhazian IS Icelandic RW Kin yarwanda AF Afrikaans IW Hebre w SA Sanskrit AM Ameharic JI Yiddish SD Sindhi AR Arabic JW Jav anes.
EN 73 RS-232C INTERF ACE ● 9PIN D- Sub RS-232C Interface – Command Table – Lower Orde r N Higher Order Q 0 12 34 567 8 9 A B C D E F 0 Complete Error Cassette Out Not Ta r g e t ACK N AK 1 2 3 P.
74 EN RS-232C INTERF ACE ● Operation Commands Commands for oper ating functions such as PLA Y and REC on the HDD/D VD/Mini D V deck. RS-232C Interface – Command – Command Description 3A Pla ys the select ed deck. 3F Stops the selected deck. Resume will be cleared when this is pressed w hile in the Stop mode.
EN 75 RS-232C INTERF ACE 42 or B2: CueUp with Data E.g.: When setting the desired position at the 15th frame at 1 hr 23 min 45 sec. 80: Chapter Search E.g.: When searching the 12th chapter . AC RE W : HDD/D VD Deck: Functions only during pla yback. Activates re verse search.
76 EN RS-232C INTERF ACE 81: Title Search under A ORIGINAL B E.g.: When searching the 345th title, as indicated by the title number on the top right corner of the index, under A ORIGINAL B .
EN 77 RS-232C INTERF ACE 9F: Remote Data The remote control codes for controlling the VTR (similar to wired remote control) via RS-232C is as shown in the follo wing table.
78 EN RS-232C INTERF ACE B8: Input/Output Selection B8: Recording Mode Selection 1st Byte 2nd Byte External in put selection L-1 VIDEO 30 31 L-1 S-VIDEO 30 39 F-1 VIDEO 30 35 F-1 S-VIDEO 30 3D D V 30 .
EN 79 RS-232C INTERF ACE B8: Audio Language Selection See A Language Code List B ( A pg. 72). 1st Byte 2nd Byte 1st Byte 2nd Byte 1st Byte 2nd Byte JAP AN ESE 39 11 HI 39 3F RM 39 6D E N G L I S H 3 9.
80 EN RS-232C INTERF ACE B8: Subtitle Selectio n See A Language Code List B ( A pg. 72). 1st Byte 2nd Byte 1st Byte 2nd Byte 1st Byte 2nd Byte OFF 3C 10 HA 3C 3 E QU 3C 6C JAP AN ESE 3C 11 HI 3C 3F RM.
EN 81 RS-232C INTERF ACE ● System Commands Commands relating to RS-232C control system. ● Response Commands Commands for acquiring information such as deck status. * See pages 82 - 84 for data f or mat. Chapter Sense E.g.: When the current chapter is the 12th chapter.
82 EN RS-232C INTERF ACE Title/T rack Sense under A ORIGINAL B E.g.: When the current title under A ORIGINAL B is the 345th title . Title/T rack Sense in A PLA Y LIST B E.g.: When the current title under A PLA Y LIST B is the 28th title. Select Sense E.
EN 83 RS-232C INTERF ACE Status Data Sense TC Data Sense For acquiring the remaining time in the current recording mode in hours, minutes and seconds for HDD/D VD , and hours and minutes for Mini D V . E.g.: When remaining time is 1 hr 23 min 45 sec. Mini D V (hr and min only) HDD/D VD (hr , min and sec o nly) F rame is fixed as 0.
84 EN RS-232C INTERF ACE CTL Data Sense F or acquiring lapse counter of selected deck in hours, minutes and seconds. E.g.: When time lapse counter is 1 hr 23 min 45 sec.
EN 85 SPECIFICA TIONS P ower requirement AC 120 V H , 60 Hz P ower consumption P ower on: 45 W P ower off: 2.5 W Laser specification Fo r C D W avelength: 770 to 810 nm Output: 0.
86 EN LIST OF TERMS A A-B Repeat Playback .............. .................... .............. 28 Accidental erasure prevention .................. .................. 33 Adjusting The Pi cture Quality ............. ................... ..... 29 Angle Selection .
EN 87 MEMO.
© 2006 Victor Company of J apan, Limited US Printed in China 0706MNH-SW -BJ EN SR-D VM700U.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté JVC SR-DVM700U c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du JVC SR-DVM700U - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation JVC SR-DVM700U, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le JVC SR-DVM700U va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le JVC SR-DVM700U, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du JVC SR-DVM700U.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le JVC SR-DVM700U. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei JVC SR-DVM700U ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
