Manuel d'utilisation / d'entretien du produit SP-UXP4 du fabricant JVC
Aller à la page of 28
GVT0053-008A [B] For Customer Use: Enter below the Model No . and Serial No. which are located either on the rear , bot- tom or side of the cabinet. Retain this inf or mation f or future reference . Model No . Se r ia l N o. UX-P6R — Consists of CA-UXP6R and SP-UXP6.
UX-P6R/UX-P5R/UX-P4R/UX-P3R Front view Side view Caution: Proper V entilation T o avoid risk of electric shock and fire, and to prevent damage, locate the apparatus as follows: 1 Front: No obstructions and open spacing. 2 Sides/ T op/ Back: No obstructions should be placed in the areas shown by the dimensions below .
SAFETY INSTRUCTIONS “SOME DOS AND DON’TS ON THE SAFE USE OF EQUIPMENT” This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured.
– 1 – Introduction About This Manual This manual is org anized as follows: • The manual mainly explains operations using the b uttons on the remote contr ol. Y ou can use the buttons both on the r emote control and on the unit f or the same operations if they ha ve the same or similar names (or marks), unless mentioned otherwise.
– 2 – Contents Location of the Buttons and Controls ....................... 3 Front Panel ................................................................. 3 Remote Control .......................................................... 5 Getting Started .
– 3 – COMPACT DIGITAL AUDIO CD T APE FM/AM MICRO COMPONENT SYSTEM CD-R/RW PLA YBACK TIMER CLOCK STANDBY / ON VOLUME FUNCTION SOUND DIRECT OPERA TING AHB PRO REC REV .
– 4 – See pages in the parentheses for details. Front Panel 1 Remote sensor 2 For UX-P6R and UX-P5R: ST ANDBY/ON lamp (9) F or UX-P4R and UX-P3R: ST ANDBY lamp (9) 3 (ST ANDBY/ON) button (9, 16, 21) 4 T APE 2 3 b utton (9, 17, 18) Pr essing this button also turns on the unit.
– 5 – UX-P6R and UX-P5R UX-P6R and UX-P5R 1 REPEA T button (16) 2 DIMMER button (10) 3 DISPLA Y button (9) 4 PR OG (program) button (15) 5 RANDOM button (16) 6 SOUND MODE button (10) 7 A UTO PRESET b utton (11) 8 CD 0 (disc tray open/close) b utton (14) Pr essing this button also turns on the unit.
– 6 – Getting Started Supplied Accessories Make sure that y ou have all the follo wing items. The number in the parentheses indicates the quantity of the pieces supplied. • AM loop antenna (1) • FM antenna (1) • Remote control (1) • Batteries (2) If anything is missing, consult your dealer immediately .
– 7 – RIGHT LEFT MAIN SPEAKERS SPEAKER IMPEDANCE MIN 6 RIGHT LEFT MAIN SPEAKERS SPEAKER IMPEDANCE MIN 4 1 Connect the AM loop antenna to the AM LOOP terminals as illustrated. • If the AM loop antenna wire is cov ered with vinyl, remo ve the vinyl by twisting it as shown in the dia gram.
– 8 – Speaker grille T o remo ve the speaker grille, inserting your f ingers at the top of the speaker grille, pull to wards you. Then pull the bottom to wards you. T o attach the speaker grille, put the projections of the speaker grille into the holes of the speaker .
– 9 – Common Operations T urning On the Power When you press the play b utton — CD 3 / 8 , T APE 2 3 , or the source selecting button — FM/AM, and MD/A UX (UX- P6R and UX-P5R) or A UX (UX-P4R and UX-P3R), the unit automatically turns on and starts playback if the source is ready .
– 10 – Reinforcing the Bass Sound Y ou can reinforce the bass sound to maintain rich (“ AHB 1” and “ AHB 2”), full bass at low v olume. This function only affects the pla yback sound, but does not af fect your recording. T o get the effect, press AHB (Activ e Hyper Bass) PR O until “ AHB 1” or “ AHB 2” appears on the display .
– 11 – Listening to FM and AM (MW/L W) Broadcasts T uning in a Station 1 Pr ess FM/AM. The unit automatically turns on and tunes in the previously tuned sta tion (either FM or AM — MW/L W). • Each time you press the button, the band alternates between FM and AM (MW/L W).
– 12 – Receiving FM Stations with RDS RDS (Radio Data System) allo ws FM stations to send an additional signal along with their regular pr ogram signals. For e xample, the stations send their station names, as well as information about what type of program the y broadcast, such as sports or music, etc.
– 13 – Switching to a Program T ype of Y our Choice T emporarily By recei ving EON (Enhanced Other Networks) data sent by FM RDS stations, the EON function allo ws the unit to switch temporarily to a broadcast program of your choice (T A, NEWS, and INFO) from a dif ferent station.
– 14 – Playing Back CDs (CD/CD-R/CD-RW) This unit has been designed to playback the follo wing CDs: •C D • CD-R • CD-R W Continued use of irregular shape CDs (heart-shape, octagonal, etc.) can damage the unit. General Notes In general, you will hav e the best performance by keeping your CDs and the mechanism clean.
– 15 – MULTI KEY T rack number Program step number PRGM PRGM SET Programming the Playing Order of the T racks — Program Play Y ou can arrange the order in which tracks play before you start playing. Y ou can program up to 20 tracks. On the r emote control ONL Y : 1 Load a CD .
– 16 – Prohibiting Disc Ejection — T ray Lock Y ou can lock the disc tray and prohibit to eject the CD. • This is possible only while the unit is turned on. On the unit ONL Y : T o prohibit disc ejection, press (ST ANDBY/ON) while holding 7 . (If the disc tray is opened, close it first.
– 17 – Playing Back T apes Y ou can play back type I, type II, and type IV tapes without changing any settings. Playing Back a T ape 1 Pr ess 0 for cassette deck. 2 Put a cassette in with the exposed part of the tape down. 3 Close the cassette holder gently .
– 18 – Recording Recording on a T ape On the unit ONL Y : 1 Put a recordable cassette in with the e xposed part of the tape down. 2 Close the cassette holder gently . • If you want to record on both sides of a tape, see “T o record on both sides — Re verse Mode.
– 19 – CD Direct Recording Everything on the CD goes onto the tape in the order it is on the CD, or according to the order you ha ve made for Program play . On the unit ONL Y : 1 Put a r ecordable cassette in with the exposed part of the tape down.
– 20 – Using the T imers Continued There are three timers a vailable — Daily T imer, Recor ding T imer , and Slee p Timer . Before using the timers, you need to set the clock built in the unit (see page 9).
– 21 – 6 Pr ess TIMER to complete the timer setting . 7 Pr ess (ST ANDBY/ON) to turn off the unit (on standby) if y ou ha ve set the timer with the unit turned on. • When the timer turns on the unit, the timer ( ) indicator and the selected timer mode indicator (D AIL Y or REC) start flashing.
– 22 – Classification of the PTY codes for some FM stations may be different from the above list. Description of the PTY codes: NEWS :N e w s . AFF AIRS : T opical program expanding or enlar ging upon the news — debate, or analysis. INFO : Program the purpose of which is to impart advice in the widest sense.
– 23 – Maintenance T o get the best performance of the unit, keep your discs, tapes, and mechanism clean. Handling cassette tapes • If the tape is loose in its cassette, take up the slack by inserting a pencil in one of the reels and rotating. • If the tape is loose, it may get stretched, cut, or caught in the cassette.
– 24 – Specifications UX-P6R (CA-UXP6R and SP-UXP6) UX-P5R (CA-UXP5R and SP-UXP5) Amplifier Output Po wer: 120 W (60 W + 60 W) at 6 Ω (MAX.) 100 W (50 W + 50 W) at 6 Ω (10 % THD) Audio input sensitivity/Impedance (a t 1 kHz) A UX: 400 mV/48 k Ω Audio output lev el A UX: 260 mV/5.
VICT OR COMP ANY OF JAP AN, LIMITED EN 0101MWMMDWJEM UX-P5R&3R[B]_Cover 01.1.16, 4:34 PM 2.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté JVC SP-UXP4 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du JVC SP-UXP4 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation JVC SP-UXP4, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le JVC SP-UXP4 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le JVC SP-UXP4, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du JVC SP-UXP4.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le JVC SP-UXP4. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei JVC SP-UXP4 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
