Manuel d'utilisation / d'entretien du produit SP-UXG68 du fabricant JVC
Aller à la page of 48
MICRO COMPONENT SYSTEM UX-G68 —Consists of CA-U XG68 and SP-U XG68 INSTRUCTIONS SUPER VIDEO GVT0203-006A [US,UN,UG,UX,A,UW] Cover[U].fm Page 1 Friday, December 15, 2006 6:28 PM.
G-1 Warnings, Cautions and Others CAUTION— (Standby/on) button! Disconnect the mains plug to shut the pow er off completely (the ST ANDBY lamp goes off). When installing the apparatus, ensure that the plug is easily accessible. The (Standby/on) button in any position does not disconnect the mains line.
1 Precautions Installation • Install the System in a locati on with adequate ventilation to prevent internal heat build-up in the System. • Install in a pl ace which is le vel, d ry and neither too hot nor too cold—between 5°C an d 35°C. • Leave sufficient dist ance between the System and the TV.
2 Playable Disc/File Types In addition to the above discs/files, this System can playback audio data record ed on CD-Extra. • The following discs ca nnot be played back: DVD-RAM, CD-I (CD-I Ready), CD-ROM, Photo CD , CD-G (CD-Graphics) and DVD/CD Text.
3 Connections • Connect VIDEO OUT directly to the video input of your TV. Connecting VIDEO OUT to a TV via a VCR may interfere with your viewing when playing back a copy- protected disc. Connecting VI DEO OUT to an integrated TV/VCR system may also in terfere with your viewing.
4 ~ AM/FM antenna To assemble the AM loop antenna To connect AM/FM antenna For better F M reception • Disconnect the supplied FM an tenna, and connect to an outdoor FM antenna usin g a 75 Ω wire with coaxial type connector (IEC or DIN45325).
5 TV/monitor Connect the COMPONENT, S-VIDEO, or VIDEO jacks which you want to use. • To select progressive scanni ng mode (see pag e 14), use COMPONENT jacks. • After connecting a TV, select the proper video signal mode according to the connection method.
6 Display Indicators The indications on the display tell you a lot of things while you are operating the System. Before operating the System, be fa miliar with when and how the indi cator illuminates on the display. 1 QP Link (Quick Portable Link) indicator • Lights whe n QP Link is activated.
7 Daily Operations —Playback 1 Turn on the power. The STANDBY lamp on the main unit turns off. • Without pressing AUDIO, the System turns on by pressing one of th e source buttons. • The System turns on and activates the AUX source by starting playback on an external device when QP Link is activated.
8 Listening to the Radio To set the AM tu ner interval spacing Before operating the tuner, it is required to select the appropriate AM space interval used for your area. • This is possible only while the System is on standby. 1 Select the AM band. 2 Turn off the power.
9 3 Select a preset number for the station you store. • You can also use the y or 1 button. 4 Store the station. To tune in to a preset stat ion 1 Select the band (FM or AM). 2 Select the preset number for the station you stored . • You can also use the y or 1 button.
10 Playing Back a Disc/File Before operating a disc/file, be familiar how a disc/file is recorded. • DVD Video comprises of “ Titles ” which includes “ Chapters ,” DVD Audio/MP3/WMA /WAV /MP.
11 • For DivX, each time you press the > or < button, you can skip to a scene for 30 seconds or 5 minutes depending on the DivX file. To locate an item directly You can select a title/c hapter/track directly and sta rt playback.
12 Daily Operations —Sound & Other Adjustments Adjusting the Volume You can adjust the volume level from VOL MIN to level 40 (VOL MAX). To drop the volume in a moment Adjusting the Sound To reinforce the heavy soun d This boosts the low and high frequency sound—Sound Turbo I I.
13 To adjust the ton e You can adjust the bass and treble level from –3 to +3 . To adjust the bass To adjust the treble Creating 3-dimensional Sound Field —3D Phonic • This does not function for MPEG-1/MPEG-2/ASF/DivX discs. While playing a disc.
14 Adjusting the Audio Input Level If the sound from the component connected to the AUX jack is too loud or is too quiet when changing from another source to “AUX,” you can change the audio input level through the AUX jack (without changing the volume level).
15 3 Adjust the parameter. 4 Repeat steps 2 to 3 to adjust other parameters. To erase the screen, press VFP again while holding SHIFT. Setting the Clock Without setting the built-in clock, you cannot use Daily Timers (see page 33). • To exit from setting the clock, press CLOCK/TIMER (while holding SHIF T) as required.
16 Unique DVD/VCD Operations Selecting the Audio Track For DVD Video/DivX: While playing back a c hapter containing audio languages, you can select the language to listen to. For DVD Audio: While playing back a track containing audio channels, you can select th e audio channel to listen to.
17 Selecting the Subtitle Language For DVD Video/DivX: While playing back a chapte r containing subtitl es in different languages, you can select th e subtitle language to display on the TV. For DVD-VR: While playing, you can turn the subtitles on or off.
18 2 Enter the key number. 3 Follow the interactive instruction s shown on the screen. To cancel the key number e ntry, press 7 . Making Dialogues Clear—Clear Voice When you playback a disc or USB mass storage cla ss device, you can make the singer’s voice s or dialogues of the movie clear—Clear Voi ce.
19 Advanced Playback Operations Programming the Playing Order —Program Play You can arrange the playing ord e r of the chapters or tracks (up to 99) before you start playback. • Program play cannot be used for DVD-VR/JPEG/ MPEG-1/MPEG-2/ASF/DivX a nd files in a USB mass storage class devic e.
20 3 Start playback. To check the prog rammed contents Before or after playback... • You can also use 4 or x to check the programmed contents. To modify the prog ram Before or after playback... To exit from Program Play Before or after playback... Playing at Random—R andom Play You can play all chapters or tracks at rando m.
21 Playing Repeatedly • You can also se lect the repeat mode using the on-screen bar (see pages 23 and 24). • For MP3/WMA/WAV/JPEG/MPEG-1/MPEG-2/ASF / DivX, see page 27. Repeat Play You can repeat playback. • For DVD Video: While playing... • For DVD Audio: While playing or be fore playback.
22 On-screen Bar Operations You can check the disc information and use some functions through the on-screen bar. Remote ONLY INFO OFF 1 / 3 TIME TRACK D VD-A UDIO GROUP 14 TIME 0:00:58 TRACK 23 1 / 3 PAGE 2 4 13 LPCM 2/0.0ch 2 OFF 1/3 1/3 1/3 TIME 4 TITLE 14 TOT AL 1:25:58 CHAP 23 D VD-VIDEO TITLE 2 TIME OFF CHAP .
23 To operate using th e On-screen Bar Ex.: Selecting a subtitle (French) for DVD Video While a disc is se lected as the source. .. 1 Display the enti re on-scree n bar. * This does not appear fo r MP3/WMA/WAV/JPEG/MPEG- 1/MPEG-2/ASF/DivX discs and files in a USB mass storage class device.
24 4 Select the repeat mod e you want. * 1 While playing a DVD-VR di sc, “PG” appears, and while playing a Play list, “P L” appears. * 2 During Program Play and Random Play, “STEP” appears. 5 Finish the setting. A-B Repeat • See also page 21.
25 4 Enter the desired ch apter/track number. • To correct a mis-entry, press the number buttons until the desired number shown in th e pop-up window. 5 Finish the setting. Browsable Still Pictures For DVD Audio only: While playing back a track linked to browsable still pictures (B.
26 Audio/Video File Operations Operations on the Control Screen You can search for and play the desired items through the control screen for MP 3/WMA/WAV/JPEG/MPEG-1/ MPEG-2/ASF/D ivX files.
27 To start playback • Once you start viewing a JPEG/MPEG-1/MPEG-2/ ASF/DivX track, the c ontrol screen disappears. • To cancel slide-show and disp lay the current still picture, press 8 . • You can select a group dire ctly by pressing a number button after pressing GROUP/T ITLE (except for DVD-VR disc).
28 Advanced Tape Operations Recording on a Tape You can use type I tapes for recording. • To play a tape, see page 9. 1 Insert a recordable cas sette. 2 Select and start playing the source—“FM,” “AM,” “DVD/CD,” “USB MEM,” or “AUX.
29 Synchronized Recording You can start and stop both pla yback and tape recording at the same tim e. To record the entire tracks 1 Load a disc or connect a USB mass storage class device and insert a recor dable cassette. • Press DVD/CD 3 or USB MEMORY 3 to select the current playing source, then 7 .
30 Enjoying Karaoke Singing Along (Karaoke) To sing along using the Karaok e discs You can enjoy Karaoke using the Karaoke disc (except Karaoke CD). • By pressing REC, you can record your singing-along (for SVCD/VCD without PBC). 1 Turn MIC VOLUME to MIN.
31 To adjust the Key (dis c/file playback only) 1 Activate Key Control. 2 Adjust the Key • Key Control cannot be activated for DVD Audio/ DVD-VR/MPEG-1/MPEG-2/ASF/DivX. To deactivate Key Control, press KARAOKE (while holding SHIFT) to select “OFF.
32 Reserving Karaoke Songs —Karaoke Program Play You can determine the playback order of the titles or tracks on the disc player. You can program up to 12 steps. 1 Change the source to “DVD/CD.” 2 Activate Karaoke Program Play. • PRGM indicator flashes during this mode.
33 Timer Operations Setting the Timer Using Daily Timer, you can wake up with your favorite music. On the other hand, wi th Recording Timer, yo u can make a tape of a radio broadcast au tomatically. You can store three Daily Time r settings and one Recording Timer setting; however, you ca n activate only one of the timers at the sa me time.
34 5 Select the vo lume level. • You can adjust the volume level (“1” to “40” and “VOL – –”). If you select “VOL – –,” the v o lume is set to the last level when the unit has been turned off. Once settings are com pleted, the Timer setting information appears in sequence.
35 Setup Menu Operations INFO Initial settings The Setup Menu cannot be activated during playb ack. 1 Press SET UP. 2 Press ( or )to select the menu . 3 Press ( or ) to move to select the item. 4 Press ENTER/SET. 5 Press ( or ) to select the opti ons, then press ENTER/SET.
36 AUDIO menu Item Contents DIGITAL AUDIO OUTPUT Set this item c orrectly when using the OP TICAL DIGI TAL OUT term inal on the rear . PCM ONLY: When connecting to audio e quipment which can decode only linear PCM sign als. DOLBY DIGITAL/PCM: When connecting to a Dolby Digital decoder or an a mplifier with a built- in Dolby Digital decoder.
37 Additional Information Learning More about This System Connections (s ee pages 3 to 5) • Make sure the antenna conductors do not touch any other terminals, connecting cords or the power cord. Also, keep the antennas away from metall ic parts of the System, connecting cords and the AC pow er cord.
38 • For MP3/WMA/WAV playback... – MP3/WMA/WAV discs require a longer readout time than regular CDs. (It depends on the complexity of the group/file configuration.) – Some MP3/WMA/WAV files can not be played back and will be s kipped. Th is re sults from their recording processes and conditions.
39 Daily Operations—Sou nd & Other Adjustments (see pages 12 to 15) Adjusting the Sound: • This function also affects the sound through the h eadphones. Changing the Scanning Mode: • You cannot change the scanning mode to progressive in the following cases: – When your TV does not support the progressive vide o input.
40 Setup Menu Operatio ns (see page s 35 and 36) General: • If the upper and lower parts of the menu are cut off, adjust the picture size control of the TV. LANGUAGE menu: • When the language you have selected for MENU LANGUAGE, AUDIO LANGUAGE, or SUBTITLE is not recorded on a disc, the orig inal language is used as the initial language.
41 Troubleshooting General: Adjustments or settings are suddenly cancel ed before you finish. s There is a time limit. Repeat procedure again. Operations are disabled. s The built-in microprocessor may malfunction due to external electri cal interference.
42 Language Code List AA Afar AB Abkhazian AF Afrikaans AM Ameharic AR Arabic AS Assamese AY Aymara AZ Azerbaijani BA Bashkir BE Byelorussian BG Bulgarian BH Bihari BI Bislama BN Bengali, Bangla BO Ti.
43 OPTICAL DIGITAL OUT Signals * While playing some DVDs, digital signals may be emitted at 20 bits or 24 bits (at their original bit rate) through the OPTICAL DIGITAL OUT terminal if the disc s are not copy-protected. Operating JVC’s TVs Using the Remote Control You can use the remote control to operate JVC’s TVs.
44 Specifications Amplifier section—CA-UXG68 Output Power: 120 W (60 W + 60 W) at 6 Ω (10% THD) Audio Input AUX: 500 mV/50 k Ω (at “AUX LVL1”) 250 mV/50 k Ω (at “AUX LVL2”) 125 mV/50 k.
45 Parts Index Remote control Main unit Button Page AUDIO g 7 TV h 43 7 t 10 , 11 , 18 , 20 , 27 , 28 , 29 y , 1 u 9 , 10 x , 4 , 9 , 10 , 11 , 20 , 27 8 y 10 , 18 , 20 , 27 , 29 , ENTER/SET q 9 , 11 .
0207WMKMDCJEM EN © 2007 Victor Company of Japan, Limited UX-G68 MICRO COM PONENT SYSTEM Mains (AC) Line Instruction (not ap plicable for Europe, U.S.A.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté JVC SP-UXG68 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du JVC SP-UXG68 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation JVC SP-UXG68, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le JVC SP-UXG68 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le JVC SP-UXG68, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du JVC SP-UXG68.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le JVC SP-UXG68. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei JVC SP-UXG68 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
