Manuel d'utilisation / d'entretien du produit LYT0108-001A du fabricant JVC
Aller à la page of 88
G R-A X 999 U M COMP ACT VHS CAMCORDER INSTRUCTIONS LYT0108-001A ENGLISH EN Com pa ct VHS.
2 EN Dear Customer , Thank you for purchasing the JVC Compact VHS camcorder. Before use, please read the safety information and precautions contained in the following pages to ensure safe use of your new camcorder . This camcorder is designed to be used with NTSC-type color television signals.
EN 3 ANTENNA LEAD IN WIRE ANTENNA DISCHARGE UNIT (NEC SECTION 810-20) GROUNDING CONDUCTORS (NEC SECTION 810-21) GROUND CLAMPS POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250.
4 EN USE 1. Accessories T o avoid personal injury: • Do not place this product on an unstable cart, stand, tripod, bracket or table. It may fall, causing serious injury to a child or adult, and serious damage to the product. • Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with the product.
EN 5 MAJOR FEA TURES REMEMBER Pr ogram AE with Special Effects ( Z pg. 26, 27) n Auto Mode Lock n Auto Mode Release n Electronic Fog Filter n ND Ef fect n Sepia n T wilight n Sports n Nega/Posi n 1/2000 sec. High Speed Shutter Digital Hyper Zoom ( Z pg.
6 EN QUICK OPERA TION GUIDE (VIDEO) 2 3 4 1 4 2 1 3 2 1 3 Using the battery pack 1 Hook-on the battery pack’ s top end to the camcorder . (Charging procedure, Z pg. 10 ) 2 Push in the battery pack until it locks into place. T o remove the battery pack Slide BA TT .
EN 7 QUICK OPERA TION GUIDE ( D.S.C.) 4 2 1 3 1 3 2 Using the battery pack 1 Hook-on the battery pack’ s top end to the camcorder. (Char ging procedure, Z pg. 10) 2 Push in the battery pack until it locks into place. T o remove the battery pack Slide BA TT.
8 EN CONTENTS GETTING ST ARTED 10 Power ..................................................................................... 10 Clock (Lithium) Battery Insertion/Removal .......................................... 12 Date/T ime Setting ...............
EN 9 USER MAINTENANCE 71 INDEX 72 Viewfinder Indications .................................................................. 73 Controls ................................................................................... 74 Connectors .................
10 EN 1 1 2 GETTING ST ARTED Power This camcorder’s 3-way power supply system lets you choose the most appropriate source of power . NOTES: ● No function is available without power supply . ● Use only specified power supply . ● Do not use provided power supply units with other equipment.
EN 11 CHARGE MARKER (OPTIONAL BA TTER Y ONL Y) A char ge marker is provided on the battery pack to help you remember whether it has been charged or not. T wo colors are provided (red and black)—you choose which one means char ged and which means dischar ged.
12 EN GETTING ST ARTED (cont.) Clock (Lithium) Battery Inser tion/Removal This battery is necessary for clock operation and to perform date/time settings. SWITCH OFF POWER 1 Switch off the unit’ s power and remove the power supply unit. OPEN COVER 2 Open the clock battery compartment cover while pressing the release tab.
EN 13 Date/T ime Setting ACCESS MENU SCREEN 1 First set the Power Switch to “CAMERA”. T urn the Select Dial to any position except AUTO LOCK, then press the MENU Jog Dial. SELECT FUNCTION 2 Rotate the MENU Jog Dial to move the highlight bar to “DA TE/TIME”, then press it.
14 EN GETTING ST ARTED (cont.) Grip Adjustment EXP AND LOOP 1 Separate the V elcro strip. INSER T HAND 2 Pass your right hand through the loop and grasp the grip. ADJUST STRAP LENGTH 3 Adjust so your thumb and fingers can easily operate the Recording Start/Stop Button and Power Zoom Button.
EN 15 Shoulder Strap Attachment A TT ACH STRAP 1 Following the illustration at left, thread the strap through the top of the eyelet 1 , then fold it back and thread it through the buckle 2 . Repeat the procedure to attach the other end of the strap to the other eyelet 3 , making sure the strap isn’t twisted.
16 EN MENU 4 MENU END FOCUS EXPOSURE DATE T IME TELE MACRO TAPE LENGTH M. W. B. ZOOM SPEED 4 NE X T AUTO AUTO DEC OFF T40 AUTO FAST 25. 98 MENU 4 MENU END FOCUS EXPOSURE DATE T IME TELE MACRO TAPE LENGTH M. W. B. ZOOM SPEED 4 NE X T AUTO AUTO DEC OFF T20 AUTO FAST 25.
EN 17 1 2 3 Loading/Unloading A Cassette OPEN CASSETTE HOLDER 1 Slide EJECT until the holder opens. Do not use force to open. INSER T/REMOVE CASSETTE 2 Make sure the label is facing outward. CLOSE CASSETTE HOLDER 3 Press PUSH and make sure the holder is closed and locked.
18 EN VIDEO RECORDING Basic Recording NOTE: Y ou should already have performed the procedures listed below . If not, do so before continuing. ● Power ( Z pg.
EN 19 STOP RECORDING 4 Press the Recording Start/Stop Button again to stop recording. • The camcorder re-enters the Record-Standby mode. NOTES: ● A cassette holder can’t be opened unless a power supply is attached. ● There may be a delay after you press EJECT until the holder opens.
20 EN VIDEO RECORDING Basic Features FEA TURE: Zooming PURPOSE: T o produce the zoom in/out effect, or an instantaneous change in image magnification. Digital circuitly doubles the maximum 22x magnification offered by optical zoom. This system is called Digital Zoom.
EN 21 FEA TURE: Quick Review PURPOSE: T o check the end of the last record- ing. OPERA TION: 1) Press “ ” and release quickly during the Record–Standby mode. n T ape is rewound for about 2 seconds and played back automatically , then pauses in Record–Standby mode for the next shot.
22 EN Auto Date Record mode Date display Time display Date/Time display Date-off mode (No display) PM10:50:00 Date display Time display Date/Time display DEC 25.98 DEC 25.98 PM10:50:00 Auto date record mode Auto date record executed DEC 25.98 AUTO DATE Auto Date Record mode VIDEO RECORDING Basic Features (cont.
EN 23 FEA TURE: V ideo Light PURPOSE: T o brighten the scene when natural lighting is too dim. OPERA TION: 1) Set the LIGHT OFF/AUTO/ON Switch as required: ON : Always keeps the light on as long as the camcorder is turned on. AUTO : Automatically turns on the light when the camcorder senses insufficient lighting on the subject.
24 EN Snapshot This interesting feature lets you record two types of digital still images that look like photographs onto a tape, as well as keeping them in the camcorder ’ s built-in memory . It is a great way to spice up footage of events such as parties, weddings and graduations.
EN 25 FINE 1 2 22 21 1 0 V iewfinder Remaining number of shots Pin-Up A still image on a white background. A shadow effect is added to give it a three dimensional feel. Full A still image that occupies the entire image field is recorded. (Blinking) NOTES: ● Six sample images have been stored in the built-in memory at the factory .
26 EN VIDEO RECORDING Advanced Features Program AE With Special Effects All you have to do to access any of the variety of shooting effects is to turn the Select Dial. SELECT MODE 1 T urn the Select Dial until the symbol of the function you want is aligned with the mark.
EN 27 Dial V iewfinder Mode symbol indication Auto Mode Lock LOCK AUTO LOCK Auto Mode Lock Locks the camcorder in Full Auto mode, preventing incorrect operation due to accidental button pressing during shooting. • In this mode the following controls are disabled; DA TE/TIME display select, and the Menu Jog Dial.
28 EN B K F ADER Fades in/out to a black screen. MOSAIC (Fader) Gradually turns/returns the picture into/from a mosaic pattern. SHUTTER (Wipe) A black screen moves in from the top and bottom, closing over the image like a shutter , or a new image pushes open the black screen vertically from the center .
EN 29 NOTE (for Fade/W ipe, Wide, Super LoLux, Instant Titles and Picture Stabilizer) : When the Select Dial is turned to AUTO LOCK, the above functions will be set to the Factory settings (Fade/W ipe-standby : “OFF”, W ide mode : off, Super LoLux : “MAX”, Instant T itle : off, Picture Stabilizer: off).
30 EN Instant T itles The camcorder has eight preset titles in memory . Y ou can superimpose one of them above a previously stored title as shown in the illustration to the left. Instant T itles can be displayed not only in English but also in French, Spanish and Portuguese.
EN 31 Using Menu For Detailed Adjustment This camcorder is equipped with an easy-to-use, on-screen menu system that simplifies many of the more detailed camcorder settings. ACCESS MENU SCREEN 1 T urn the Select Dial to any position except AUT O LOCK, then press the MENU Jog Dial.
32 EN VIDEO RECORDING Advanced Features (cont.) AUTO MANU AUTO MANU OFF ON F AST SLOW Adjusts focus automatically . Allows you to adjust focus manually ( Z pg. 34, 35). Adjusts exposure automatically . Allows you to adjust exposure manually ( Z pg. 36).
EN 33 = Factory setting and when the Select Dial is set to AUTO LOCK OFF ON ON OFF OFF ON This feature allows you to set the parameters for Animation and T ime-Lapse recording ( Z pg. 39). This feature allows you to set the parameters for Self-T imer ( Z pg.
34 EN Focusing Auto Focus The camcorder’s Full Range AF system offers continuous shooting ability from close-up to infinity . However , correct focus may not be obtainable in the situations listed below (in these cases use manual focusing): • When two subjects overlap in the same scene.
EN 35 Manual Focus NOTE: Y ou should already have made the necessary viewfinder adjustments ( Z pg. 14). If you haven’ t, do so before continuing. ACCESS MENU SCREEN 1 T urn the Select Dial to any position except AUT O LOCK, then press the MENU Jog Dial.
36 EN VIDEO RECORDING Advanced Features (cont.) Exposure Control This feature automatically adjusts the iris for the best available picture quality , but you can override and make the adjustment manually . ACCESS MENU SCREEN 1 T urn the Select Dial to any position except AUTO LOCK, then press the MENU Jog Dial.
EN 37 MENU 4 MENU END FOCUS EXPOSURE DATE T IME TELE MACRO TAPE LENGTH M. W. B. ZOOM SPEED 4 NE X T AUTO AUTO DEC OFF T30 AUTO FAST 25. 98 AUTO : FINE : CLOUD : HALOGEN MWB EX I T M. W. B. Manual White Balance Adjustment (M.W .B.) The white balance is usually adjusted automatically .
38 EN VIDEO RECORDING Advanced Features (cont.) Self-Timer Y ou can set the delay between pressing the Recording Start/Stop Button and the actual start of recording. If you secure the camcorder , you (or whomever is operating the camcorder) can enter the scene before recording starts.
EN 39 Animation Give stationary scenes or objects an illusion of movement. This function allows you to shoot a series of pictures, each slightly different, of the same object for a brief period of time. NOTE: Make sure the camcorder is in the Record-Standby mode and the recording mode is set to “SP” before performing the following steps.
40 EN VIDEO PLA YBACK Basic Playback LOAD A CASSETTE 1 Slide EJECT to open the cassette holder , then insert the cassette with the label facing out. Press PUSH to ensure the holder is closed and locked. SELECT MODE 2 Set the System Select Swtich to “VIDEO”, then set the Power Switch to “PLA Y”.
EN 41 VIDEO PLA YBACK Features T racking This function can be used to eliminate noise bars that appear on-screen during playback. Initial setting is Auto T racking. Manual T racking is also available. ACTIV A TE MANUAL TRACKING 1 Press the MENU Jog Dial during playback mode.
42 EN VIDEO PLA YBACK Featur es (cont.) FEA TURE: Still Playback PURPOSE: T o pause during playback. OPERA TION: 1) Press PLA Y/P AUSE during playback. 2) T o resume normal playback, press PLA Y/P AUSE again. NOTE: Noise bars appear and pictures may become monochrome during Still Playback.
EN 43 VIDEO PLA YBACK Using The Cassette Adapter Cassette Adapter (VHS Playpak) Use this to play back a VHS-C video cassette recorded with this camcorder . It is fully compatible with any VHS video cassette recorder . The C-P7U adapter is battery powered and automatically performs tape loading and unloading.
44 EN There are three basic types of connections. When making the connections, refer also to your VCR and TV instruction manuals. Connection T o A VCR A (Editing, Dubbing and Playback) NOTE: Use the optional Audio and V ideo cables.
EN 45 T APE DUBBING T ape Dubbing CONNECT EQUIPMENT 1 Following the illustration at left, connect the camcorder and the VCR. PREP ARE FOR DUBBING 2 Set the camcorder ’ s Power Switch to “PLAY”. T urn on the VCR’ s power , and insert the appropriate cassettes in the camcorder and the VCR.
46 EN DIGIT AL STILL CAMERA (D.S.C.) SHOOTING Basic Shooting When shooting a still image, it is not recorded onto the tape, but it is stored in the camcorder's built-in memory in the selected Picture Mode. A stored still image data can be transferred to a PC, saved, and processed using a Paint Software program ( Z pg.
EN 47 FEA TURE: Picture Mode Setting PURPOSE: There are two image settings you can choose from when storing in the camcorder ’ s memory: FINE and ST ANDARD. Y ou can select either according to your needs. OPERA TION: 1) ACCESS MENU SCREEN T urn the Select Dial to any position except AUTO LOCK.
48 EN Mode Function Allows you to use the optical zoom or the Digital Zoom. Zooming is possible from 22 times (the optical zoom limit), to a maximum of 44 times digital magnifi- cation. Select optical zoom or Digital Zoom in the Menu Screen ( Z pg. 50).
EN 49 Mode Function Dusk, twilight scenery , fireworks, etc., look more natural and dramatic. The following happens when T wilight mode is selected ( Z pg. 26, 27): • Auto gain control is turned off. • White Balance is set to “ ” (FINE day mode), but can also be manually changed to another mode.
50 EN MENU MENU MENU 4 MENU END FOCUS EXPOSURE DATE T IME TELE MACRO PICTURE M. W. B. ZOOM SPEED 4 NE X T AUTO AUTO DEC OFF FINE AUTO FAST 25. 98 4 BACK REC T IME INT. T IME TALLY LAMP TITLE LANG. D. ZOOM COLOR BAR JLIP ID NO. DEMO MODE 4 MENU END OFF OFF ON ENGLISH ON OFF 06 OFF IN T.
EN 51 AUTO MANU AUTO MANU OFF ON Menu Screen Explanations Adjusts focus automatically. Allows you to adjust focus manually ( Z pg. 34, 35). Adjusts exposure automatically . Allows you to adjust exposure manually ( Z pg. 36). Allows you to set the current date and time ( Z pg.
52 EN D.S.C. SHOOTING Advanced Features (cont.) = Factory setting and when the Select Dial is set to AUTO LOCK OFF ON ON OFF OFF ON D. ZOOM INT . TIME T ALL Y LAMP REC TIME TITLE LANG. COLOR BAR JLIP ID NO. DEMO MODE Menu Screen Explanations (cont.) Setting is impossible.
EN 53 D.S.C. PLA YBACK Basic Playback Still images shot using this camcoder are automatically numbered, then stored in numerical order in the built-in memory . Y ou can view the still images stored in memory , one at a time, much like flipping through a photo album.
54 EN D.S.C. PLA YBACK Advanced Features Using Menu For Detailed Adjustment This camcorder is equipped with an easy-to-use, on-screen menu system that simplifies many of the more detailed camcorder settings. ACCESS MENU SCREEN 1 Press the MENU Jog Dial.
EN 55 Mode Ef fect All still images stored in memory can be displayed six at a time. This mode is a convenient way to look for the still image you want to view and to check the still images you shot beforehand ( Z pg. 56). Allows you to run through all the still images stored in memory automatically in numerical order .
56 EN MENU I NDEX SL I DE SHOW 1 SL I DE SHOW 2 PROTECT DELETE 4 MENU END 01 04 03 06 02 05 EXIT < INDEX > D.S.C. PLA YBACK Advanced Featur es (cont.) Index Y ou can view all still images stored in memory six at a time. Use this mode when looking for a still image you want to view and when checking the still images you shot beforehand.
EN 57 Protect This mode helps prevent accidental erasure of images. Put a padlock mark next to the desired still image, and that still image cannot be deleted. ACCESS MENU SCREEN 1 Press the MENU Jog Dial. ACCESS PROTECT MENU SCREEN 2 Rotate the MENU Jog Dial to move the highlight bar to “PROTECT”, then press it.
58 EN Delete When the memory in which still images are stored becomes full, the number of remaining shots available reaches “0” (blinking). In this situation it becomes impossible to take your next shot. Delete some still images already stored in memory to make room for new shots.
EN 59 ACCESS DELETE EXECUTE MENU SCREEN 5 Rotate the MENU Jog Dial to move the highlight bar to “CANCEL” or “ENTER”, then press it. • “CANCEL” does not delete the selected still images and the screen returns to the Menu Screen. • “ENTER” deletes the selected still images.
60 EN MENU I NDEX SL I DE SHOW 1 SL I DE SHOW 2 PROTECT DELETE 4 MENU END Slide Show Y ou can run through all the still images stored in memory automatically . This is like a regular slide-show . There are 2 types available. Select either according to your needs.
EN 61 Connection to a Windows ® PC/Macintosh ® Image data stored in the camcorder's built-in memory can be transferred to a W indows ® PC or Macintosh ® and saved using the provided image transfer software.
62 EN A C B a 2 1 3 4 5 6 7 8 9 0 ! @ #1 $ 8 9 ! 5 0 3 7 % ^ 2 @ 4 6 & 1 2 3 1 1 1 2 3 1 2 3 1 USING REMOTE CONTROL UNIT BUTTONS FUNCTIONS With the camcorder’ s power switch With the camcorder ’s power switch set to “CAMERA”. set to “PLAY”.
EN 63 15 ° 5m 15 ° 30 ° 30 ° INDEX 1MIN 1 2S FEATURE: Self-Timer , Animation and Time-Lapse PURPOSE: The remote control lets you set/release Interval T imer and Rec Time functions as well as the Menu Screen. OPERATION: Self-Timer 1) Set Instead of performing steps 1 through 4 on pg.
64 EN 1 2 3 4 5 6 7 8 9 0 VCR BRAND NAME BUTTONS (A) (B) GE 1 1 9 2 9 ` 9 4 MAGNAVOX 9 5 1 1 7 1 7 6 MITSUBISHI 6 7 6 8 NEC 3 7 3 8 PHILIPS 1 9 9 5 1 1 9 4 9 1 9.
EN 65 A B C MAKE CONNECTIONS CONNECT TO . . . 1 A JVC VCR EQUIPPED WITH REMOTE P AUSE TERMINAL Connect the editing cable to the Remote P AUSE terminal. B JVC VCR NOT EQUIPPED WITH REMOTE P AUSE TERMINAL BUT EQUIPPED WITH R.A. EDIT CONNECTOR Connect the editing cable to the R.
66 EN USING REMOTE CONTROL UNIT (cont.) SELECT SCENES ACCESS R.A. EDIT COUNTER DISPLA Y 1 Press PLA Y/P AUSE , then press ON/OFF and the counter display appears in the viewfinder , and the screen of the connected TV . REGISTER BEGINNING OF SCENE 2 Press REW or FF to locate the beginning of a scene you want, then press IN/OUT to register that point.
EN 67 1 3 2 IN OUT IN OUT IN OUT Original tape (camcorder) Edited tape (VCR) AUTOMA TIC EDITING TO VCR ENGAGE VCR’S RECORD-P AUSE MODE 1 Point the remote control toward the VCR’ s infrared sensor and press VCR REC STBY , or manually engage the VCR’ s Record-Pause mode.
68 EN M– 0:1 2:3 4 USING REMOTE CONTROL UNIT (cont.) Insert Editing (VIDEO) Y ou can record a new scene into a previously recorded tape, replacing a section of the original recording with minimal picture distortion at the in- and out-points. The original audio remains unchanged.
EN 69 M– 0:1 2:3 4 Insert Editing (Insert A Still Image From The Built-in Memory Onto A T ape) Y ou can insert a still image stored in the camcorder's built-in memory into a previously recorded tape, replacing a section of the original recording with minimal picture distortion at the in- and out-points.
70 EN e 4 M – 0 :05:20 e 4 M – 0 :05:20 Audio Dubbing Y ou can record a new soundtrack on a prerecorded tape (normal audio only). Perform steps 1 , 2 and 3 of the Insert Editing (VIDEO) procedure ( Z pg. 68) before continuing. • The sound comes from the built-in microphone (or an external microphone if connected).
EN 71 USER MAINTENANCE LENS COVER Open/Close Switch Set to “POWER OFF”. BATT . RELEASE PUSH EJECT Remove. Marks After Use 1 Set the Power Switch to “POWER OFF” to turn off the camcorder . 2 Slide EJECT to open the cassette holder , then remove the cassette.
72 EN INDEX REC SP FINE 1 2 30MIN 444 4 S.L X T 3 0 01 MWB P NORM 5MIN 1 4S LENS COVER PAUSE DEC 2 5 . 9 8 AM 1 1 : 4 5 : 1 8 MERRY CHRISTMAS TAPE END T WILIGHT 1 7 8 2 3 4 6 5 & * ( 0 ! $ % w ) q.
EN 73 Viewfinder Indications $ •Record–Standby Mode Indicator ................................. Z pg. 18 •Lens Cover W arning: LENS COVER .......................... Z pg. 19 •Data T ransfer Display: PC MODE . ................................ Z pg.
74 EN INDEX (cont.) 4 3 W T E R 1 9 0 ! 5 6 7 8 ^ # % $ @ e O t y u i o q P w Q p I a 2 Y STD FINE A B & * ( ) r U.
EN 75 Controls 1 Power Zoom Button ........................... Z pg. 20 Page Button ........................................ Z pg. 53 2 Select Dial ......................................... Z pg. 26 3 Multi-Function Control • EFFECT Button .........
76 EN INDEX T erms A AC Power Adapter ................... pg. 10 Animation Recording ............... pg. 39, 63 Audio Dubbing ........................ pg. 70 Auto Date Record .................... pg. 22 Auto Focus ............................... pg. 34 Auto Mode Lock Mode .
EN 77 N ND Effect Mode ....................... pg. 27, 48 Nega/Posi Mode ....................... pg. 27, 49 P Padlock Mark ........................... pg. 57 Picture Mode Setting ................ pg. 47 Picture Stabilizer ...................... pg. 21, 48 Pin-Up Image .
78 EN No power is supplied. The power suddenly goes off and doesn’t come back on by itself. Some functions are not available. V ertical white lines appear when shooting a very bright object. Bright, crystal-shaped spots appear in the viewfinder . The viewfinder and the lens have become dirty (ex.
EN 79 When the System Select Switch is set to “VIDEO”: ● Make sure the Erase Protection tab is in the position that allows recording. If not, slide the tab. Some cassettes have removable tabs. If the tab has been removed, cover the hole with adhesive tape ( Z pg.
80 EN When the System Select Switch is set to “D.S.C.”: ● When the number of remaining shots available reaches “0” (blinking), it becomes impossible to take your next shot. Perform “DELETE” function to remove some still images already stored in memory ( Z pg.
EN 81 Batter y Packs The supplied battery pack is a nickel-cadmium battery . Before using the supplied battery pack or an optional battery pack, be sure to read the following cautions: 1. T o avoid hazard . . . .... do not burn. .... do not short-circuit the terminals.
82 EN CAUTIONS (cont.) Cassettes T o properly use and store your cassettes, be sure to read the following cautions: 1. During use . . . .... make sure the cassette bears the VHS-C mark. .... be aware that recording onto prerecorded tapes automatically erases the previously recorded video and audio signals.
EN 83 About moisture condensation . . . ● Y ou may have observed that pouring a cold liquid into a glass will cause drops of water to form on the glass’ outer surface.
84 EN SPECIFICA TIONS GENERAL Operating temperature : 0°C to +40°C (32°F to 104°F) Operating humidity : 35% to 80% Storage temperature : –20°C to +50°C (–4°F to 122°F) W eight : Approx.
EN 85.
.
.
G R-AX 999UM COPYRIGHT© 1998 VICTOR COMPANY OF JAPAN, LTD. UM Printed in Japan 0498MSV * UN * YP VICTOR COMP ANY OF JAPAN, LIMITED EN.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté JVC LYT0108-001A c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du JVC LYT0108-001A - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation JVC LYT0108-001A, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le JVC LYT0108-001A va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le JVC LYT0108-001A, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du JVC LYT0108-001A.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le JVC LYT0108-001A. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei JVC LYT0108-001A ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
