Manuel d'utilisation / d'entretien du produit LCT2582-001A-H du fabricant JVC
Aller à la page of 79
LT-32WX50 INSTRUCTIONS LCD Monitor LCD Monitor ◆ LT-32WX50 1009HHH-MW-MT 2009 Victor Company of J apan, Limited LCD Monitor ◆ INSTRUCTIONS LCT2582-001A-H EN WX50_covers_US.
ENGLISH As an “ENERGY STAR®” partner, JVC has determined that this product or product model meets the “ENERGY STAR®” guidelines for energy efficiency.
ii WARNING: TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. CAUTION: TO INSURE PERSONAL SAFETY, OBSERVE THE FOLLOWING RULES REGARDING THE USE OF THIS UNIT. 1. Operate only from the power source specified on the unit.
iii Warnings Changes or modifications not approved by JVC could void the warranty. ● When you don’t use this monitor for a long period of time, be sure to disconnect both the power plug from the AC outlet and antenna for your safety.
iv 9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety.
v Warnings 22) Use of power cords or AC adapters other than those provided may cause fire or malfunction. 23) DO NOT allow young children to play with the plastic bag that came with the monitor when you unpacked it. Failure to do so can result in suffocation, causing injury.
vi Warning To prevent an accidental fall To prevent injury, the monitor must be fixed to the floor/cabinet. Use bolts and nuts or screws (ø 4 mm, sold separately) to fix the monitor to the floor/cabinet utilizing the holes of the stand. 26) When installing the monitor on the wall, ask your dealer to install.
vii Warnings FCC Notice: Caution: Changes or modifications not expressly approved by party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
02 Features › More precise adjustment of picture quality with a wide range of adjustment properties ➔ page A-2 › Enjoy SLR digital camera photographs ➔ page A-11 › Slim cabinet provides you .
03 Contents Contents Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii Installation . . . . . . . . . . .
04 Inserting batteries into the remote control When replacing the batteries To avoid short-circuit, place the minus end of the batteries first. ● Batteries shall not be exposed to excessive heat such as direct sunshine, fire or the like. ● Read the precautions on the battery.
05 Installation Attaching the covers ● Attach the HDMI cover (3) and AC terminal cover (5) after connections have been made. Fix the HDMI cover to the unit using the supplied screw. Break off the bottom right of the HDMI cover when you want to extend the HDMI cable backwards.
06 Connecting external devices To connect a computer To connect a device with a composite terminal To connect a device with component terminals To INPUT-1/INPUT-2 terminals Green To connect a DVI device To connect an HDMI device ø 3.5 mm stereo mini plug To INPUT-1 terminal LT32WX50__us_en.
07 Installation INPUT-1: HDMI TM terminal INPUT-2: HDMI TM terminal INPUT-3: D-sub 15 pin INPUT-4 : SD card slot, USB type slot ( ➔ page 36) AUDIO IN terminal : 3.
Menu Language Interactive Plug-in Menu English(EU) Set Previous 2/4 English(US) Suomi Français(EU) Français(US) Deutsch Ελληνιά Magyar Next English(EU) 08 Connecting the power cable/AC Adapter ● Ground the earth plug of the power cable to the earth terminal of the AC outlet.
09 Parts identification Parts identification Main unit Power indicator Lights while the monitor is on. Remote sensor Aim the remote control here. Turns the monitor on/off (on standby). INPUT Switches the input. MENU Opens the setting menu. Functions as the down cursor key in the menu operations.
10 Remote control POWER Turns the monitor on/off (on standby). LINK Opens the photo viewer menu or the operation window for HDMI CEC devices. ( ➔ page 11) OPTION Opens the setup window of HDMI CEC devices. Opens the setting menu of the photo viewer ( ➔ page 38).
Rec. Rec.Stop NA VIGA TION Function Operation Panel Speaker Device Operate Select Exit Input-1 Monitor Link >Recorder 11 Controlling HDMI devices Controlling HDMI devices You can control HDMI CEC devices connected to this monitor using the remote of the monitor.
Memory Setting Load Preset Tint Tint Setting Color Contrast Contrast Setting Brightness Sharpness Picture Memory1 0 Page 1/3 0 0 0 0 12 Changing the settings Example: to change the setting of “ Color Temperature ” 1 Open the menu. 2 Select “ Picture ”.
Show Your True Colors. Technical information Adjust the picture to your needs A-2 Set up the monitor for your PC A-10 Enjoy SLR digital camera photographs A-11 Menu index by task A-12 LT32WX50__us_en.indb A-1 LT32WX50__us_en.indb A-1 09.10.19 11:27:36 AM 09.
Memory Setting Load Preset Tint Tint Setting Color Contrast Contrast Setting Brightness Sharpness Picture Memory1 0 Page 1/3 0 0 0 0 To use a preset 1 Open the menu.
Adjust the picture to your needs To customize the settings You can create your own set of picture settings by arranging the settings of a preset. Storing several sets of settings helps you to enjoy a picture in the taste you like according to the viewing environment and characteristics of the source.
● Special settings Standard The most standard setting. ● Characteristics of the 10 presets CCTV HD Suitable for monitoring CCTVs in HD format. Signage Suitable for digital signage use in market, shops or hotels. Dynamic Makes pictures colorful and bright, suitable for watching in a well-light room.
Game Gives priority to the response time for picture movement. Suitable for game consoles. Adjust the picture to your needs Option Suitable for displaying medical images including x-ray pictures. ● This setting is only for approximate presentation and does not conform to any official standard of medical imaging.
● Setting values of each preset ● The settings are subject to change for amelioration. Dynamic Standard Theater Monitor Tint 0000 Tint Setting BY Gain 0000 BY/RY Angle 0 + 2+ 30 Color +8 +4 +2 0 C.
Adjust the picture to your needs Photo Pro Game Signage CCTV HD CCTV SD Option 000000 000000 000000 0 0 +5 +8 +14 0 0 0 0 + 4+ 50 Off Off Medium High High Off Off Off Off Off Off Off Off Off On On On .
Dynamic Standard Theater Monitor White Balance Setting R Drive / G Drive / B Drive 0 000 R Cutoff / G Cutoff / B Cutoff 0 000 Color Management Mode-1 Mode-2 Mode-3 Off Color Mngmt.
Adjust the picture to your needs Photo Pro Game Signage CCTV HD CCTV SD Option 000000 000000 Off Mode-2 Mode-1 Mode-2 Mode-1 Off 000000 000000 000000 000000 000000 000000 000000 Mode-3 Mode-2 Mode-3 M.
Set up the monitor for your PC Selecting the input signal When you connect a PC to the INPUT-3 terminal, set the type of the input signal accordingly. ● For signals in VGA60 and XGA60 Set “ Sampling Mode ” to “ Std ”. ( ➔ page 32) ● For signals in WVGA60 Set “ Sampling Mode ” to “ Wide ”.
Enjoy SLR digital camera photographs When you select the picture preset of “ Photo Pro ” in “ Memory Setting ”, you can view the photographs just the way they were taken. You can also view photographs on an SD card or USB device using Photo viewer.
Menu index by task Page Hue adjustment General tone of color Tint 14 Tone of color (including white) Color Temperature 19 Tone of color (in detail) White Balance Setting 19 Range of color representati.
13 Changing the settings : Picture Picture Memory Setting You can store up to 6 sets of the “ Picture ” settings and use them. ● When the input is changed, the memory used for the input last time is automatically applied.
14 Tint Adjusts the tone of color. ■ –30 – +30 (Skin color reddish ↔ Skin color greenish) Tint Setting Adjusts the tone of color in detail. ● The setting is fixed to 0 and unadjustable when “ Color Space ” is set to “ sRGB ”, “ AdobeRGB ”, or “ x.
15 Changing the settings : Picture Contrast Adjusts the brightness of brighter areas of pictures. ■ –30 – +30 (Dark ↔ Bright) Contrast Setting Adjusts settings of functions relating with contrast. ● The functions are not available when “ Color Space ” is set to “ sRGB ” or “ AdobeRGB ”.
16 Sharpness Emphasizes outlines on a picture. ● The setting is unadjustable when “ Enhancer ” is set to “ Off ”. ■ –30 – +30 (Fuzzy ↔ Sharp) Enhancer Selects the frequency band enhanced by “ Sharpness ”. ■ Off : Deactivates the function.
17 Changing the settings : Picture Backlight Setting Adjusts settings of functions relating with backlight. ◆ Smart Picture Reduces the backlight automatically in dazzling scenes. ■ On / Off ◆ Dynamic Backlight Reduces the backlight automatically in dark scenes to represent black deeper.
18 Color Matrix Selects the color matrix used for color conversion. ● The setting is fixed to “ Auto ” and unadjustable when “ Color Space ” is set to “ sRGB ”, “ AdobeRGB ”, or “ x.v.Color ”. ● The setting is fixed to “ Auto ” and unadjustable when ” PC Monitor Mode ” is set to “ On ”.
19 Changing the settings : Picture Color Temperature Adjusts the color temperature (color tone). The higher the color temperature, the more bluish the picture. ● The setting is fixed to “ Mode-5 ” and unadjustable when “ Color Space ” is set to “ sRGB ” or “ AdobeRGB ”.
20 Color Management Adjusts the total coloring of pictures. Three color management presets are available to suit a variety of color temperature settings. ● The setting is fixed to “ Off ” and unadjustable when “ Color Space ” is set to “ sRGB ”, “ AdobeRGB ”, or “ x.
21 Changing the settings : Picture ◆ Green Tint / Green Color Adjusts the tone/colorfulness of green colors. ■ –15 – +15 (Yellow ↔ Cyan) / –30 – +30 (Dilute ↔ Dense) ◆ Cyan Tint / Cyan Color Adjusts the tone/colorfulness of blue colors.
22 Noise Reduction Adjusts the settings of picture noise reduction. ● The functions are unavailable when “ PC Monitor Mode ” is set to “ On ” or when signals in a PC signal format are coming in. ◆ Digital VNR Reduces picture noise. ■ Auto : Estimates the amount of noise automatically and applies suitable noise reduction processing.
23 Changing the settings : Picture Natural Cinema Displays quick-moving parts on cinemas originally taken on films with more clarity. ● The setting is fixed to “ Off ” and unadjustable when “ Picture Delay Time ” is set to “ Short ”.
24 Eco Mode Adjusts the brightness of backlight depending on the luminance of the room to reduce power consumption. ■ Display : Activating the function and indicating its performance. ■ On : Activating the function. Its performance is not indicated.
25 Changing the settings : Sound Sound ● The following settings are not adjustable while using the Photo viewer ( ➔ page 36). Bass Adjusts bass tone. ■ –6 – +6 (Weaker ↔ Stronger) Treble Adjusts treble tone. ■ –6 – +6 (Weaker ↔ Stronger) Balance Adjusts sound balance.
26 PEQ Optimizes the sound for the monitor’s supplied speaker unit. When the speaker unit is connected, setting “ PEQ “ to “ On “ brings high and low tones into balance, making the sound clearer. Select “ Off “ when connecting other speakers.
27 Changing the settings : Setup Setup Menu Language You can choose the language used for on-screen messages. ■ English (EU) / Deutsch / Français(UE) / Italiano / Español (UE) / Català / Nederlan.
28 Aspect Adjusts the aspect of pictures. ● The setting is also adjustable through the [ASPECT] button on the remote control. ◆ Options when the current input signal is SD ■ Auto : When the video signal contains information about aspect ratio (WSS etc.
29 Changing the settings : Setup ◆ Options when the current input signal is HD ● You can select “ Full Native ” only when the input signal is 1080i/p. ■ Full : Stretching a picture to the width of the monitor. ■ Full Native : Displaying a picture of 1080i/p without enlargement.
30 Position Adjustment Adjusts the picture position on the monitor. ● Vertical adjustment is effective when “ Aspect ” is set to “ 14:9 Zoom ”, “ 16:9 Zoom ”, “ Panoramic ”, “ 16:9 Zoom Subtitle ”, or “ Panoramic Zoom ”. ● Horizontal adjustment is effective only when “ Aspect ” is set to “ Panoramic Zoom ”.
31 Changing the settings : Setup Input Label Adds a source name specifying a device after the source name (“ Input-1 ” - “ Input-3 ”). ■ (No label) / VCR / DVD / Blu-ray Disc / PVR / D-VHS /.
32 PC Setting Adjusts the settings for PC signals. ● The items below are unadjustable when no PC signal is input: “ H Size ”, “ V Size ”, “ Dot Clock ”, “ Clock Phase ”, “ PC Position Adjustment ”, and “ Auto Position Adjustment ”.
33 Changing the settings : Setup ◆ Dot Clock Adjust this when the picture is not aligned vertically. ● The adjustment is kept after turning off the power. ■ –20 – +20 ◆ Clock Phase Adjust this when letters on the screen look blurred or swaying.
34 HDMI Control with HDMI Makes an HDMI CEC-compatible external component controllable through this monitor. ■ On : Enables HDMI CEC control. ■ Off : Deactivates HDMI CEC control. One Touch Play Starting playback on an HDMI CEC-compatible external component automatically turns on the monitor and change its source to the component.
35 Changing the settings : HDMI AMP Control Makes an HDMI CEC-compatible amplifier controllable through the monitor. ● The setting is fixed to “ Off ” and unadjustable when “ Control with HDMI ” is set to “ Off ”. ■ On / Off Input-1 Audio Selects the audio signal type for INPUT-1.
Cautions ● Insert or remove SD cards and USB devices gently and in the right direction. Otherwise, the devices or the monitor may be damaged. ● It is recommended to keep a backup of your files. ● Do not connect a mouse, keyboard or the like. ● Do not use a USB hub or extension cable.
Viewing photographs on SD card/USB device ● To view the next/previous page, press [GREEN]/[RED]. ● When you turn on the monitor while both an SD card and a USB device are connected, the photographs on the SD card are displayed. Select “ Flash Device “ in the “ Device ” setting ( ➔ page 38) to display the photographs on the USB device.
To customize the settings 1 Open the menu. 2 Change the settings. 3 Exit the menu. ◆ Device Select which device is displayed when both are connected; SD card or USB device. ◆ Sort Select the display order of photographs. ■ File Name : In alphabetic order by file name.
Viewing photographs on SD card/USB device About SD cards and USB devices ● The maximum capacity of devices playable on this monitor is as follows: - SD cards, miniSD cards, microSD cards: 2 GB - SDH.
40 External Control You can control LT-32WX50 from external control equipment (a personal computer or a dedicated controller) via the RS-232C terminal on the rear of the monitor. ● Connect the RS-232C extension cable to the RS-232C terminal on the rear side of the monitor.
41 External Control Command outline To control the monitor from external control equipment, send operation commands to the monitor. Example of communication procedures 1 Operation command to select “ Input-3 ”. 2 Acknowledgment from the monitor. 3 The input is changed to “ Input-3 ”.
42 Command list ● “ * ” is the monitor ID. Normally, set it to “0x80”. ● Enter the appropriate data to “xx” or “x”. No. Operation commands 1 † ! 0x82 * P W x Lf 2 † ! 0x82 * I .
43 External Control Functions Data Turns on/off the monitor. 0: Off 1: On +: Switches the power status. Selects the input. 1: Input-1 2: Input-2 3: Input-3 4: Input-4 Adjusts the volume. 00 – 50: Sets the volume directly. +: Turns the volume up. –: Turns the volume down.
44 Troubleshooting The following are not malfunctions. ● This LCD display is built with very high precision technology; however, be aware that a few pixels may be missing or constantly lit. ● When a still image is displayed for a long time, it may remain indistinctly on the screen after the picture has changed.
45 Troubleshooting No sound. ● Press the MUTING button. ● Check the amplifier connection. ● When “ AMP ” is selected under “ Speaker ”, the sound is output from the amplifier, and not from the speakers of the monitor. ( ➔ page 11) No picture from HDMI devices.
46 Specifications Model name LT-32WX50 LCD panel 32-inch (viewable) Screen size (visible area size measured diagonally) 801.3 mm (31.5’’) Display resolution 1920×1080 Display colors 1.07 billion colors (10 bit color) Viewing angle (TYP.) 178 ° (Horizontally) 178 ° (Vertically) Luminance (TYP.
47 Specifications Notice on transportation ● This monitor is precision equipment and needs dedicated packing material for transportation. Never use any packing material supplied from sources other than JVC or JVC-authorized dealers. Supplied accessories ➔ page 04 Input terminals HDMI ×2, D-sub (15 pin) ×1, Audio input (3.
● Use screws of adequate length (M4 × 12 – 16) to fix the VESA bracket and wall mount adapter. 7 : 46.5 (1 7/8) 8 : 544.1 (21 1/2) 9 : 7.8 (3/8) 0 : 22.5 (1) - : 190.9 (7 5/8) = : 173.7 (6 7/8) ~ : 336.2 (13 1/4) 48 Dimensions unit: mm (inch) 1 : 496.
49 Specifications Logos & Licenses As an “ENERGY STAR®” partner, JVC has determined that this product or product model meets the “ENERGY STAR®” guidelines for energy efficiency. ● For easy understanding, pictures and illustrations are shown by being emphasized, omitted or composed, and may slightly be different from actual products.
50 Compliant signal formats (1) INPUT-3 terminal (PC) Signal Frequency Vertical (Hz) Horizontal (kHz) Dot clock (MHz) PC98 56.42 24.823 21.050 VGA 60 †1 59.94 31.469 25.175 VGA 72 72.81 37.861 31.500 VGA 75 75.00 37.500 31.500 WVGA 60 †2 60.00 31.
51 Specifications Total pixels Effective pixels Standard pixel per line line per frame pixel per line line per frame 848 440 640 400 — 800 525 640 480 VESA Standard 832 520 640 480 VESA Standard 840.
52 INPUT-1, INPUT-2 terminal (HDMI-HDMI) Signal Frequency Vertical (Hz) Horizontal (kHz) Dot clock (MHz) VGA 60 59.94/60 31.469/31.5 25.175/25.2 480/60p 59.94/60 31.469/31.5 27/27.027 720/60p 59.94/60 44.955/45 74.176/74.25 1080/60i 59.94/60 33.716/33.
53 Specifications Total pixels Effective pixels pixel per line line per frame pixel per line line per frame 800 525 640 480 858 525 720 480 1650 750 1280 720 2200 562/563 1920 1080 858 262/263 720 480.
54 ● This software is based in part on the work of the lndependent JPEG Group. ● The open source software is embedded in this product. For more information, please go to: http://www.jvc-victor.co.jp/download/lnx/09jvc_mo/index.html ● DejaVu font is used in this product under the license below.
55 Specifications Arev Fonts Copyright ------------------------------ Copyright (c) 2006 by Tavmjong Bah. All Rights Reserved. Permission is hereby granted, free of charge, to any person obtaining a c.
56 Index Icons . . . . . . . . . . . . . . . . . . . . . 10 Numbers 3DY/C . . . . . . . . . . . . . . . . . . . . . 22 4:3 Aspect Setting . . . . . . . . . . 31 1080 Auto Setting . . . . . . . . . . 31 A AMP Control . . . . . . . . . . . . . . . 35 Aspect .
57 Index L LINK . . . . . . . . . . . . . . . . . . . . . . . 11 Lip Sync . . . . . . . . . . . . . . . . . . . 25 M Main unit . . . . . . . . . . . . . . . . . . 09 MENU . . . . . . . . . . . . . . . . . . . . . 12 Menu Language . . . . . . . . . . .
JVC COMP ANY OF AMERICA Division of JVC Americas Corp. 1700 V alley Road W ayne, New Jersey , 07470 JVC CANADA, INC. 21 Finchdene Square Scarborough, Ontario Canada, M1X 1A7 U.S.A. TOLL FREE: 1 (800) 252-5722 http://www .jvc.com Canada TOLL FREE: 1 (800) 964-2650 http://www .
THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY (50) UNITED STATES, THE DISTRICT OF COLUMBIA AND IN THE COMMONWEALTH OF PUERTO RICO. WHAT WE WILL DO: WHAT YOU MUST DO FOR WARRANTY SERVICE: WHAT IS NOT COVERED: JVC AMERICAS CORP.
LT-32WX50 INSTRUCTIONS LCD Monitor LCD Monitor ◆ LT-32WX50 1009HHH-MW-MT 2009 Victor Company of J apan, Limited LCD Monitor ◆ INSTRUCTIONS LCT2582-001A-H EN WX50_covers_US.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté JVC LCT2582-001A-H c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du JVC LCT2582-001A-H - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation JVC LCT2582-001A-H, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le JVC LCT2582-001A-H va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le JVC LCT2582-001A-H, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du JVC LCT2582-001A-H.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le JVC LCT2582-001A-H. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei JVC LCT2582-001A-H ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
