Manuel d'utilisation / d'entretien du produit KD-S10 du fabricant JVC
Aller à la page of 25
GET0171-001B [J] For customer Use: Enter below the Model No. and Serial No. which are located on the top or bottom of the cabinet. Retain this information for future reference. Model No. Serial No. For installation and connections, refer to the separate manual.
2 ENGLISH INFORMA TION (For U.S.A.) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
3 ENGLISH CONTENTS Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. How to reset your unit ...............
ENGLISH 4 MO RPT RND MODE SCM CD AM FM SSM DIRECT TRACK ACCESS 1 2 3 4 9 8 7 6 t w p 5 q e r i u y o ; a s d f g h k j LOCA TION OF THE BUTTONS 1 (Standby/On Attenuator) button 2 +/– button 3 LOUD (.
5 ENGLISH 4 Adjust the sound as you want (see pages 12 – 14). T o drop the volume in a moment Press briefly while listening to any source. “A TT” starts flashing on the display , and the volume level will drop in a moment. T o resume the previous volume level, press the button briefly again.
6 ENGLISH RADIO OPERA TIONS Listening to the radio Y ou can use either automatic searching or manual searching to tune in to a particular station. Searching a station automatically: Auto search 1 Select the band (FM 1 – 3, AM). Note: This r eceiver has three FM bands (FM1, FM2, FM3).
7 ENGLISH 3 T une in to a station you want while “M” (manual) is flashing. • If you release your finger from the button, the manual mode will automatically turn off after 5 seconds. • If you hold down the button, the frequency keeps changing (in 200 kHz intervals for FM and 10 kHz for AM) until you release the button.
8 ENGLISH MO RPT RND 7 8 9 10 11 12 Manual preset Y ou can preset up to 6 stations in each band (FM1, FM2, FM3 and AM) manually . Ex: Storing an FM station of 92.5 MHz into the preset number 1 of the FM1 band. 1 Select the band (FM1 – 3, AM) you want to store FM stations into (in this example, FM1).
9 ENGLISH Playing a CD Insert a disc into the loading slot. The unit turns on, draws a CD and starts playback automatically . Note on One-T ouch Operation: When a CD is alr eady in the loading slot, pressing CD turns on the unit and starts playback automatically .
10 ENGLISH Locating a track or a particular portion on a CD T o fast-forward or reverse the track T o go to the next tracks or the previous tracks T o go to a particular track directly Press the number button corresponding to the track number to start its playback.
11 ENGLISH Prohibiting CD ejection Y ou can prohibit the CD ejection and can lock a CD in the loading slot. While pressing CD, press and hold 0 for more than 2 seconds. “ EJECT ” flashes on the display for about 5 seconds, and the CD is locked and cannot be ejected.
12 ENGLISH SOUND ADJUSTMENTS Adjusting the sound Y ou can adjust the sound characteristics to your preference. 1 Select the item you want to adjust. Each time you press the button, the adjustable items change as follows: Indication T o do: Range BAS Adjust the bass.
13 ENGLISH Recalling the sound modes When “SCM LINK” is set to “LINK ON,” select the source. Each time you change the playback source, the SCM indicator flashes on the display . The sound mode stored in memory for the selected source is recalled.
14 ENGLISH Storing your own sound adjustments Y ou can adjust the sound modes (BEA T , SOFT , POP: see page 13) to your preference and store your own adjustments in memory . • There is a time limit in doing the following procedure. If the setting is cancelled before you finish, start from step 1 again.
15 ENGLISH OTHER MAIN FUNCTIONS Setting the clock 1 Press and hold SEL (Select) for more than 2 seconds. “CLOCK H”, “CLOCK M”, “SCM LINK” or “LEVEL” appears on the display . 2 Set the hour . 1 Select “CLOCK H” if not shown on the display .
16 ENGLISH 3 Select the desired mode — “ VOL 1 ” , “ VOL 2 ” or “ OFF ” . 4 Press SEL (Select) to finish the setting. Selecting the level display Y ou can select the level display according to your preference. When shipped from the factory , “VOL 2” is selected.
17 ENGLISH Note on cleaning the connectors: If you fr equently detach the control panel, the connectors will deteriorate. T o minimize this possibility , periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being car eful not to damage the connectors.
18 ENGLISH MAINTENANCE Handling discs This unit has been designed to reproduce CDs and CD-Rs (Recordable). • This unit is not compatible with MP3 discs. How to handle discs When removing a disc from its case, press down the center holder of the case and lift the disc out, holding it by the edges.
19 ENGLISH TROUBLESHOOTING What appears to be trouble is not always serious. Check the following points before calling a service center . Symptoms Causes Remedies • Sound cannot be heard The volume level is set to the Adjust it to the optimum level.
20 ENGLISH SPECIFICA TIONS AUDIO AMPLIFIER SECTION Maximum Power Output: Front: 45 watts per channel Rear: 45 watts per channel Continuous Power Output (RMS): Front: 17 watts per channel into 4 Ω , 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distortion.
1 103KKSFLEJEIN EN, SP , FR © 2003 VICTOR COMP ANY OF JAP AN, LIMITED VICTOR COMPANY OF JAPAN, LIMITED Having TROUBLE with operation? Please reset your unit Refer to page of How to Reset Still having trouble?? USA ONL Y Call 1-800-252-5722 http://www .
1 5 3 m m 1 8 4 m m ( 7 - 1 / 4 " ) ( 2 - 1 / 8 " ) KD-S5050/KD-S10 Installation/Connection Manual Manual de instalación/conexión Manuel d’installation/raccordement ESP AÑOL • Esta unidad está diseñada para funcionar con 12 V de CC, con sistemas eléctricos de masa NEGA TIV A.
2 • When installing the unit without using the sleeve • Instalación de la unidad sin utilizar la cubierta • Lors de l'installation de l’appareil sans utiliser de manchon In a T oyota for example, first remove the car radio and install the unit in its place.
3 ENGLISH ELECTRICAL CONNECTIONS T o prevent short circuits, we recommend that you disconnect the battery’s negative terminal and make all electrical connections before installing the unit. If you are not sure how to install this unit correctly , have it installed by a qualified technician.
4 PRECAUTIONS on power supply and speaker connections: • DO NOT connect the speaker leads of the power cord to the car battery; otherwise, the unit will be seriously damaged. • Connect the black lead (ground), yellow lead (to car battery , constant 12V), and red lead (to an accessory terminal) correctly .
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté JVC KD-S10 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du JVC KD-S10 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation JVC KD-S10, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le JVC KD-S10 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le JVC KD-S10, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du JVC KD-S10.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le JVC KD-S10. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei JVC KD-S10 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
