Manuel d'utilisation / d'entretien du produit KD-DV5000 du fabricant JVC
Aller à la page of 94
ENGLISH DEUTSCH FRANÇAIS L VT1054-001B [E] INSTR UCTIONS BEDIENUNGSANLEITUNG MANUEL D ’ INSTRUCTIONS GEBRUIKSAANWIJZING NEDERLANDS D VD/CD RECEIVER D VD-/CD-RECEIVER RECEPTEUR D VD/CD D VD/CD-RECEIVER KD-D V5000 For installation and connections, refer to the separate manual.
2 ENGLISH How to reset your unit After detaching the control panel, press the reset button on the panel holder using a ball-point pen or similar tool. This will reset the built-in microcomputer . NOTE: If you r eset the unit during play , the playback mode selections (e.
3 ENGLISH WARNINGS • DO NO T install any unit in locations where; – it may obstruct the steering wheel and gearshift lever operations, as this may result in a traffic accident. – it may obstruct the operation of saf ety devices such as air ba gs, as this may result in a fatal accident.
4 ENGLISH CONTENTS How to reset your unit ............................... 2 LOCA TION OF THE BUTTONS ............ 5 Control panel ............................................. 5 Remote controller ...................................... 6 Preparing the remote controller .
5 ENGLISH LOCA TION OF THE BUTTONS Control panel Refer to the pages in parentheses for details. 1 SRC (source) button (8, 64, 66, 72, 73) 2 • (standby/on/attenuator) button (8) • Control dial 3 Display window 4 Remote sensor 5 5 (up) button • Functions as the Play button for DVDs and VCDs.
6 ENGLISH Remote controller 3 SETUP button (50)* 2 4 Basic sound setting buttons SEL, +, and – • The +/– buttons normally function as the volume adjustment buttons. • The +/– buttons also function as the 2ndVOL +/– buttons when pressed with SHIFT (S) button.
7 ENGLISH Preparing the remote controller Before using the remote controller: • Aim the remote controller directly at the remote sensor on the main unit. Make sure there is no obstacle in between. • Do not expose the remote sensor to strong light (direct sunlight or artificial lighting).
8 ENGLISH BASIC OPERA TIONS T urning on the power 1 T urn on the power . Note on One-T ouch Operation: When you select a sour ce in step 2 below , the power automatically comes on. Y ou do not have to pr ess this button to turn on the power . 2 Select the source.
9 ENGLISH Canceling the display demonstration When shipped from the factory , display demonstration has been activated, and starts automatically when no operations are done for about 20 seconds. • It is recommended to cancel the demonstration before you use the unit for the first time.
10 ENGLISH 5 Set the cloc k system. 1 Select “ 24H/12H. ” 2 Adjust “ 24Hours ” or “ 12Hours. ” 6 Finish the setting. T o chec k the current cloc k time when the unit is turned off, press DISP (D). The power turns on and the clock time is shown for about 5 seconds, then the power turns of f.
11 ENGLISH RADIO OPERA TIONS Selected band appears. Lights up when receiving an FM stereo broadcast with sufficient signal strength. FM1 FM2 FM3 AM SRC The operations of this section are mainly explained using the buttons on the control panel. When the remote controller can be used for the same operations, it is then explained.
12 ENGLISH FM1 FM2 FM3 AM SRC M MODE Searching for a station manually: Manual search 1 Select the band (FM1 – 3, AM). 1 Press SRC (source) repeatedly to select the tuner . 2 Press and hold SRC. Each time you press and hold the button, the band changes.
13 ENGLISH 2 Press and hold number button 5 while “ Mode ” is still on the display . Local FM stations with the strongest signals are searched and stored automatically in the band number you have selected (FM1, FM2, or FM3). These stations are preset in the number buttons — No.
14 ENGLISH 1 3 Press and hold the number b utton (in this example, 1) for more than 2 seconds. 4 Repeat the abo ve procedure to store other stations into other preset number s. Notes: • A pr eviously preset station is erased when a ne w station is stor ed in the same pr eset number .
15 ENGLISH Selecting a preset station using the preset station list If you forget which stations are stored in which preset numbers, you can check the preset station list, then select your desired station. 1 Select the band (FM1 – 3, AM). 1 Press SRC (source) repeatedly to select the tuner .
16 ENGLISH Changing the display pattern By pressing DISP (D), you can change the information shown on the display . Each time you press the button, the display patterns change as follows: D DISP Appears only when selecting a preset station number .
17 ENGLISH RDS OPERA TIONS What you can do with RDS RDS (Radio Data System) allows FM stations to send an additional signal along with their regular programme signals. For example, the stations send their station names, as well as information about what type of programme they broadcast, such as sports or music, etc.
18 ENGLISH 1 Press and hold SEL (select) f or more than 2 seconds so that one of the PSM items appears on the displa y . (PSM: see pages 58 and 59.) 2 Press number b utton 4 to select “TUNER”—T uner category of the PSM settings. The “PTY Stnby” (standby) setting screen appears on the display .
19 ENGLISH Using PTY Standby Reception PTY Standby Reception allows the unit to switch temporarily to your favorite programme (PTY : Programme T ype) from any source except AM stations.
20 ENGLISH Searching your favorite programme Y ou can search any one of the PTY codes. In addition, you can store your 6 favorite programme types in the number buttons. When shipped from the factory , the following 6 programme types have been stored in the number buttons (1 to 6).
21 ENGLISH 3 Press and hold the number b utton for more than 2 seconds to store the PTY code selected into the preset number y ou want. Selected preset number flashes for a while.
22 ENGLISH Setting the T A volume level Y ou can preset the volume level for T A Standby Reception. When a traffic programme is received, the volume level automatically changes to the preset level. • See also “ Changing the general settings (PSM) ” on page 57.
23 ENGLISH PTY codes News: News Affairs: T opical programmes expanding on current news or affairs Info: Programmes which impart advice on a wide variety of topics Sport: Sport events Educate: Educatio.
ENGLISH 24 PLA Y ABLE DISCS • On some discs, the actual operations may be different from what is explained in this manual. • The following discs cannot be played back; – DVD-Audio, DVD-ROM, DVD-RAM, DVD-R, DVD-RW , CD-ROM, CD-I (CD-I Ready), Photo CD, etc.
ENGLISH 25 MP3 discs MP3 is an abbreviation of Motion Picture Experts Group 1 (or MPEG-1) Audio Layer 3. MP3 is simply a file format with a data compression. By using MP3 format, one CD-R or CD-RW can contain 10 times as much data as a regular CD can.
ENGLISH 26 The following marks used in this manual indicate the playable discs. BASIC DISC PLA YBACK Starting playback 1 Open the control panel. 2 Insert a disc into the loading slot. The disc loading lamp start flashing, and the unit draws in the disc automatically .
ENGLISH 27 • Display indications when inserting an MP3 disc 1 T otal track number 2 T otal folder number 3 MP3 indicator 4 Elapsed playing time of the current track 5 Current folder number and track.
ENGLISH 28 Press ¢ to go ahead to the beginning of the next chapter/track. Each time you press the button, the beginning of the next chapter/track is located (and played back). Press 4 to go back to the beginning of the current chapter/track. Each time you press the button, the beginning of the previous chapter/track is located (and played back).
ENGLISH 29 On-screen guide icons During play , the following guide icons may appear for a while on the monitor . : Appears at the beginning of a scene containing multi-subtitle languages (for DVD only). : Appears at the beginning of a scene containing multi-audio languages (for DVD only).
ENGLISH 30 DVD/VCD SPECIAL FUNCTIONS Ex. When the disc has 3 selections— English, French, Spanish and no subtitle (OFF) ENGLISH ENGLISH 1/3 1/3 ENGLISH ENGLISH 1/3 1/3 ST ST ST ST • For D VD: • For VCD: Ex.
ENGLISH 31 Ex.: When the disc has 3 multi-angle views Notes: • When the pop-up window is shown, you can also select the audio languages (or audio channels) b y pr essing cursor b uttons ( 5 / ∞ ). • F or some D VDs and VCDs, changing the audio language (or audio channel) without using the disc menu is pr ohibited.
ENGLISH 32 While playing a VCD: The PBC (PlayBack Control) function allows you to operate the VCD using menus. When you start playback, a menu will automatically appear on the monitor . • A menu may be a list of items, divided screens, or some moving pictures.
ENGLISH 33 ADV ANCED DISC OPERA TIONS + TOP MENU RETURN REPEAT INTRO RANDOM OSD EQ S ZOOM SETUP SEL CH AM FM DVD – RI SUBTITLE AUDIO ANGLE 2ndVOL 2ndVOL 56 4 23 1 DISC ENTER MENU FOLDER PRESET DAB ATT SHIFT DUAL ZONE + DISC – +10 0 10 89 7 SHIFT (S) INTRO (I) RANDOM (R) 1¡ ENTER Number REPEA T OSD Cursor Notes: * “x60” is only for D VD.
ENGLISH 34 OSD 6 4 5 ENTER S SHIFT TOP MENU INTRO RETURN SETUP I 56 4 23 1 DISC ENTER MENU + DISC – 0 89 7 5 ENTER 1/3 1/3 OFF 1/5 TITLE 33 TOTAL 1:25: 58 CHAP 33 CHAP 5.1ch . 1/3 1/3 OFF 1/5 TITLE 33 TOTAL 1: 25:58 CHAP 33 CHAP . CHAPTER _ 5.1ch 5 ENTER 2 Move to CHAP .
ENGLISH 35 • For MP3: Notes: • On some DVDs, Repeat Play may be canceled by the disc itself. • On CD, VCD, and MP3 discs, Repeat Play mode cannot be turned off. • Repeat Play mode will be canceled when you start playing back a VCD with the PBC function.
ENGLISH 36 Random Play Y ou can play back tracks on a disc (or in a folder for MP3 discs) at random. • For VCD: While PBC (see page 32) is not in use. Select the random mode y ou want. The menu bar icon appears on the monitor to show the selected mode.
ENGLISH 37 OSD DISC OPERA TIONS OSD 1/3 1/3 OFF 1/5 TITLE 33 TOTAL 1:25: 58 CHAP 33 CHAP 5.1ch . 1 Disc type—DVD-VIDEO, VCD, CD 2 Audio signal format type (only for DVD) 3 Current title number (only for DVD) 4 Current chapter number (only for DVD) 5 Time information 6 Current operation mode— 3 , 8 , 7 , ¡ , etc.
ENGLISH 38 Select the Repeat Play modes. Each time you press cursor 5 or ∞ in step 4 , the repeat mode changes. • For available repeat modes, see page 35. Activate T ime Search. Press the number buttons to enter the elapsed time to a particular point in step 4 .
ENGLISH 39 Basic procedure for MP3 discs While playing an MP3 disc, the following MP3 CONTROL screen always shows on the monitor. By referring to this screen, you can easily operate the MP3 disc. • Up to 32 characters can be shown for the file names on the monitor , while 64 characters on the display of the receiver .
ENGLISH 40 S SHIFT DUAL indicator appears. DVD DUAL ZONE Then DUAL ZONE OPERA TIONS Listening with headphones By connecting headphones to the 2nd AUDIO OUT plug on the rear , you can listen to the playback sound through the DVD/CD player while listening to another source (except AM) through the speakers.
ENGLISH 41 M MODE 2 Adjust the headphone v olume through the 2nd A UDIO OUT plug. 3 Operate the D VD/CD player using the remote contr oller by referring to the monitor screen. • When Dual Zone is in use, you can only operate the DVD/CD player using the remote controller .
42 ENGLISH In this section, you can learn how to use the buttons on the control panel in order to operate the DVD/CD player . Basic disc playback T o stop playback Press ∞ (down). • This unit can remember the end point, and when you start playback again, playback begins from where it has been stopped.
43 ENGLISH While playing an MP3 disc: While playing a VCD or CD: M MODE Locating a title/chapter/track on a disc T o locate a particular title/chapter/track directly • For DVD: During play or pause — select a chapter While stopped — select a title • For VCD: While PBC (see page 32) is not in use.
44 ENGLISH T o skip to the next or previous folder Press 5 (up) while playing a disc to skip to the next folder . Each time you press the button consecutively , the next folder is located and the first track in the folder starts playing. Press ∞ (down) while playing a disc to skip back to the previous folder .
45 ENGLISH 3456 2 1 3456 2 1 T o select a track and start playback 1 Press and hold 5 (up) or ∞ (down) so that the f older name list of the inser ted disc appears on the displa y . The name of the currently playing folder will be highlighted on the display .
46 ENGLISH • For DVD: • For CD/VCD: • Chapter: Current (or specified) chapter will be repeated. • indicator appears on the display . • Title: Current title will be repeated. • indicator appears on the display . • Off: Repeat Play is canceled.
47 ENGLISH T o cancel Intro Scan, select “ Intro Off ” by pressing number button 1 repeatedly or press number button 4 in step 2 . • For MP3: • For CD: • T rack: The beginnings of all the tracks in the disc will be played. • indicator appears on the display .
48 ENGLISH Prohibiting disc ejection Y ou can prohibit disc ejection and can lock a disc in the loading slot. While pressing SRC, press and hold for more than 2 seconds. “ No Eject ” flashes on the display for about 5 seconds, and the disc is locked and cannot be ejected.
49 ENGLISH This page is from 1 105 Notes: • When the folder name is shown, the (folder) indicator lights up. When the file name is shown, the (file) indicator lights up. • If “T ag” is set to “On” (see page 60), ID3 tag information will appear on the display if the disc has an ID3 tag.
ENGLISH 50 DVD DVD SETUP MENU SETUP 7 2 DISC + DISC – 8 5 ENTER Y ou can store the initial selection for subtitle languages, audio languages, and other settings using the Setup Menu. • DVD Setup menu can only be displayed while a disc, except MP3 disc, is inserted and selected for the playback source.
ENGLISH 51 DVD 5 ENTER LANGU A GE PICTURE A UDIO T o set other items on the same menu screen Repeat steps 3 to 6 . T o set other items on other menu screens Repeat steps 2 to 6 . T o return to the normal screen Press SETUP . Y ou can select the desired options concerning picture size on the monitor .
ENGLISH 52 DVD Items For what and options MENU LANGU A GE * 1 Select the initial disc menu language. ENGLISH, SP ANISH, FRENCH, CHINESE, GERMAN, IT ALIAN, JAP ANESE, and language codes from AA to ZU (see page 79). A UDIO LANGUA GE * 1 Select the initial audio language.
ENGLISH 53 DVD Items For what and options DIGIT AL AUDIO OUTPUT Select the signal format to be emitted through the DIGIT AL OUT (Optical) terminal on the rear . • PCM ONL Y Select this when connecting an amplifier or a decoder incompatible with Dolby Digital and DTS, or connecting to a recording device.
54 ENGLISH SOUND ADJUSTMENTS Operations of this section are explained using the buttons on the control panel unless mentioned otherwise. Adjusting the sound Y ou can adjust the sound characteristics to your preference. • “V ol Adj” setting is required for each source except FM.
55 ENGLISH Selecting preset sound modes (iEQ: intelligent equalizer) Y ou can select a preset sound mode (iEQ: intelligent equalizer) suitable to the music genre. • There is a time limit in doing the following procedure. If the setting is canceled before you finish, start from step 1 again.
56 ENGLISH 4 Make adjustments as y ou like . 1) Press ¢ or 4 to select the frequency band — 60Hz, 150Hz, 400Hz, 1kHz, 2.4kHz, 6kHz, 12kHz. 2) Press 5 (up) or ∞ (down) to adjust the level of the selected band within the range of – 05 to +05. 3) Repeat steps 1) and 2) to adjust the other frequency bands.
57 ENGLISH Operations of this section are explained using the buttons on the control panel unless mentioned otherwise. Changing the general settings (PSM) Y ou can change the items listed in the table on pages 58 and 59 by using the PSM (Preferred Setting Mode) control.
58 ENGLISH Graphics Movie demonstration Ke yIn CFM Key in confirmation Clock Hr Hour adjustment Clock Min Minute adjustment 24H/12H 24 hours or 12 hours Scroll Scroll mode Dimmer Dimmer mode From– T.
59 ENGLISH T o set the movie demonstration—Graphics When shipped from the factory , the movie has been activated. • All Demo: If n o operation is done for about 20 seconds, the movie demonstration starts automatically .
60 ENGLISH T o turn on/off the key-touch tone — Beep Y ou can deactivate the key-touch tone if you do not want it to beep each time you press a button. • On: Activates the key-touch tone. • Off: Deactivates the key-touch tone. T o select the telephone muting — T elephone This mode is used when a cellular phone system is connected.
61 ENGLISH Selecting the dimmer mode Y ou can dim the display at night automatically or as you set the timer . When shipped from the factory , Auto Dimmer mode is activated. Note: Auto Dimmer supplied with this unit may not work correctly on some v ehic les, particularly on those having a contr ol dial for dimming.
62 ENGLISH Changing the display color Y ou can set the display color using the PSM control. Y ou can select your favorite color for each source (or for all sources).
63 ENGLISH Creating your own color — User Y ou can create your own colors —“ Day ” and “ Night, ” and select them as the display color for any desired source. • Day: Can be used as your user color during the day time (while the headlights are turned off), or as set by the timer — “ From – To .
64 ENGLISH 4 Select a character . • About the available characters, see page 78. 5 Mo ve the cursor to the ne xt (or previous) c haracter position. 6 Repeat steps 3 to 5 until y ou finish entering the name. 7 Finish the procedure while the last selected character is flashing.
65 ENGLISH Detaching the control panel Y ou can detach the control panel when leaving the car . When detaching or attaching the control panel, be careful not to damage the connectors on the back of the control panel and on the panel holder . Detaching the control panel Before detaching the control panel, be sure to turn off the power .
66 ENGLISH CD CHANGER OPERA TIONS Playing discs Select the CD changer (CD-CH). Each time you press the button, the source changes as described on page 8. When you select a source, the power automatically comes on. Notes: • Y ou can also use the CH button on the r emote contr oller .
67 ENGLISH • When the current disc is a CD: Playback starts from the first track of the current disc. Note: If you change the sour ce, CD changer play also stops. Next time you select the CD c hanger as the sour ce, CD changer play starts fr om wher e playback has been stopped pr eviously .
68 ENGLISH This operation is only possible when using JVC MP3-compatible CD changer (CH-X1500). T o go to a track quickly 1 Press MODE (M) to enter the functions mode while playing a disc. “ Mode ” appears on the display . 2 Press 5 (up) or ∞ (down).
69 ENGLISH T o select a disc using the disc lists If you forget what discs are loaded in the CD changer , you can show the disc title list and select a disc in the list shown on the display .
70 ENGLISH Repeat Disc Repeat Folder Repeat T rack Repeat Off M MODE REPEAT +10 T o cancel Repeat Play , select “ Repeat Off ” by pressing number button 2 repeatedly or press number button 4 in step 2 .
71 ENGLISH Mode Active Plays at random indicator Random All tracks of the Folder* indicator current folder , then lights up. tracks of the next folder and so on. Random All tracks of the Disc indicator current (or lights up. specified) disc. Random All tracks of all All indicator discs inserted in lights up.
72 ENGLISH EXTERNAL COMPONENT OPERA TIONS Operations of this section are explained using the buttons on the control panel unless mentioned otherwise. Playing an external component Y ou can connect the external component to the CD changer jack on the rear using the Line Input Adapter KS-U57 (not supplied).
73 ENGLISH DAB TUNER OPERA TIONS T uning in to an ensemble and one of the services A typical ensemble has 6 or more programmes (services) broadcast at the same time. After tuning in to an ensemble, you can select a service you want to listen to. 1 Select the D AB tuner .
74 ENGLISH Press 5 (up) to select the next service. (If a primary service has some secondary services, they are selected before the next primary service is selected.) Press ∞ (down) to select the previous service (either primary or secondary). Press 5 (up) to select the next service.
75 ENGLISH T uning in to a preset DAB service Y ou can easily tune in to a preset DAB service. Remember that you must store services first. If you have not stored them yet, “ Storing DAB services in memory ” on pages 74 and 75. 1 Select the D AB tuner .
76 ENGLISH What you can do more with DAB With the DAB tuner connected, you can tracing the same program (service) automatically while driving where the same DAB ensemble is not received. T racing the same program automatically (Alternative Reception) Y ou can keep listening to the same program.
77 ENGLISH Changing the display information By pressing DISP (D), you can change the information shown on the display . Each time you press the button, the display patterns change as follows: * 1 TEXT indicator: implies the curr ent service r ecei ved is pr oviding DLS (Dynamic Label Se gment—DAB radio te xt informa tion).
78 ENGLISH ADDITIONAL INFORMA TION Sound modes (preset frequency level settings) The list below shows the preset frequency level settings for each sound mode. • Y ou can adjust the preset sound modes temporarily . However , your temporary adjustments will be reset when you select another sound mode.
79 ENGLISH LANGUAGE CODES Code Language SN Shona SO Somali SQ Albanian SR Serbian SS Siswati ST Sesotho SU Sundanese SV Swedish SW Swahili T A T amil TE T elugu TG T ajik TH Thai TI T igrinya TK T urk.
80 ENGLISH 4:3 Letterbox Screen This is one method for displaying a wide screen picture on a conventional sized (4:3) TV . While viewing a wide screen picture, the black bars appear on the top and the bottom of the screen. 4:3 Pan-Scan Screen This is one method for displaying a wide screen picture on a conventional sized (4:3) TV .
81 ENGLISH TROUBLESHOOTING What appears to be trouble is not always serious. Check the following points before calling a service center . Remedies Adjust it to the optimum level. Check the cords and connections. Press the reset button on the panel holder after detaching the control panel.
82 ENGLISH Remedies Stop playback while driving on rough roads. Change the disc. Check the cords and connections. Insert a disc into the loading slot. Insert the disc correctly . Connect the wire (see Installation/Connection Manual). Connect the video cord correctly Select a correct input on the TV or monitor .
83 ENGLISH Remedies Insert discs into the magazine. Insert discs correctly . Insert playable discs. Insert a disc that contains MP3 files. Insert the magazine. Connect this unit and the CD changer correctly and press the reset button on the CD changer .
84 ENGLISH MAINTENANCE Center holder Handling discs This unit has been designed to reproduce DVD- Videos, VCDs, CDs, CD-Rs (Recordable), CD- RWs (Rewritable), and CD T exts.
85 ENGLISH SPECIFICA TIONS AUDIO AMPLIFIER SECTION Maximum Power Output: Front: 50 W per channel Rear: 50 W per channel Continuous Power Output (RMS): Front: 19 W per channel into 4 Ω , 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distortion.
VICTOR COMPANY OF JAPAN, LIMITED Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Haben Sie PROBLEME mit dem Betrieb? Bitte setzen Sie Ihr Gerät zurück S.
1 KD-D V5000 Installation/Connection Manual Einbau/Anschlußanleitung Manuel d’installation/raccordement Handleiding voor installatie/aansluiting ENGLISH • This unit is designed to operate on 12 V DC, NEGA TIVE ground electrical systems.
2 53 mm 184 mm 2 T rim plate Frontrahmen Plaque d ’ assemblage Sierplaat 9 8 T rim plate Frontrahmen Plaque d ’ assemblage Sierplaat 7 Sleeve Halterung Manchon Huis Mounting bolt Befestigungsschra.
3 • When installing the unit without using the sleeve / Beim Einbau des Ger ä ts ohne Halterung / Lors de l ’ installation de l ’ appareil scans utiliser de manchon / W anneer u het apparaat zonder huis installeert In a T oyota for example, first remove the car radio and install the unit in its place.
4 R L 15 FRANÇAIS DEUTSCH NEDERLANDS ENGLISH PRECAUTIONS on power supply and speaker connections: • DO NO T connect the speaker leads of the power cor d to the car battery; otherwise , the unit will be seriously damaged.
5 3 1 2 3 4 5 7 8 6 2 (ILLUMINATION) (PARKING BRAKE) P L O M N J A B G H C D E F 4 15 1 Left speaker (rear) Linker Lautsprecher (hinten) Enceinte gauche (arrière) Linkerspeaker (achterin) Right speak.
6 E F B D H G A C INPUT R L LINE OUT (FRONT) LINE OUT (REAR) L R L R L R INPUT R L L R Y ou can connect an amplifier and other equipment to upgrade your car stereo system. • Connect the remote lead (blue with white stripe) to the remote lead of the other equipment so that it can be controlled through this unit.
ENGLISH What are MP3? MP3 (MPEG A udio Lay er 3) is one of digital audio compression standards. • This player cannot pla y back MP3i and MP3 PRO f or mats. About T ag of MP3 This pla yer can show the names of alb ums, ar tists (perf or mer), and tracks of MP3 T ag.
2 ENGLISH KD-D V5000 Discs containing MP3 files MP3 playback Mixed-CD MP3 + CD-DA CD-DA playback Other files + CD-DA CD-DA playback Enhanced-CD CD-DA + MP3 CD-DA playback File name system ISO9660 Level1 Up to 12 characters (8.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté JVC KD-DV5000 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du JVC KD-DV5000 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation JVC KD-DV5000, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le JVC KD-DV5000 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le JVC KD-DV5000, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du JVC KD-DV5000.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le JVC KD-DV5000. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei JVC KD-DV5000 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
