Manuel d'utilisation / d'entretien du produit HX-D77 du fabricant JVC
Aller à la page of 102
COMPACT COMPONENT SYSTEM HX-D77 —Consists of CA-HXD77 and SP-HXD77 INSTRUCTIONS For Customer Use: Enter below the Model No. and Serial No. which are located either on the rear , bottom or side of the cabinet. Retain this information for future reference.
G-1 Warnings, Cautions and Others Mises en garde, précautions et indications diverses CAUTION To reduce the risk of electrical shocks, fire, etc.: 1 Do not remove screws, covers or cabinet. 2 Do not expose this appliance to rain or moisture. ATTENTION Afin d’éviter tout risque d’électrocution, d’incendie, etc.
G-2 IMPORTANT FOR LASER PRODUCTS 1 CLASS 1 LASER PRODUCT 2 CAUTION : Do not open the top cover. There are no user serviceable parts inside the Unit; leave all servicing to qualified service personnel. 3 CAUTION : Visible and/or invisible class 1M laser radiation when open.
1 Introduction Precautions Installation • Install in a place which is level, dry and neither too hot nor too cold—between 5°C (41°F) and 35°C (95°F). • Install the System in a location with adequate ventilation to prevent internal heat buildup in the System.
2 Contents Before Operating the System ....................... 3 Playable Disc Types .................................................... 3 Getting Started .............................................. 4 Step 1 : Unpack ..............................
3 Before Operating the System Playable Disc Types This unit has been designed to play back the following discs: In addition to the above discs, this system can play back audio data recorded on CD Text, CD-G (CD Graphics), and CD-Extra. • The following discs cannot be played back: DVD-RAM, CD-I (CD-I Ready), CD-ROM, Photo CD, SACD, etc.
4 Getting Started Step 1 : Unpack After unpacking, check to be sure that you have all the following items. The number in parentheses indicates the quantity of each piece supplied. • FM antenna (1) • AM loop antenna (1) • Composite video cord (1) • Remote control (1) • Batteries (2) If any item is missing, consult your dealer immediately.
5 Step 3 : Hook Up If you need more detailed information, see page 6 and 7. 3-6 Do not connect the AC power cord until all other connections have been made.
6 ~ To assemble and connect the AM loop antenna To assemble the AM loop antenna To connect the AM loop antenna cords • Make sure the antenna conductors do not touch any other terminals, connecting cords and power cord. Also, keep the antennas away from metallic parts of the System, connecting cords, and the AC power cord.
7 To select the color system You can select the video output to match it to the color system of your TV. • The color system can be changed only while DVD/CD is selected as the source and playback is stopped. 1 Press NTSC/PAL. 2 Select NTSC or PAL. NTSC: For an NTSC TV.
8 Display Indication The indications on the display tell you a lot of things while you are operating the System. Before operating the System, be familiar with when and how the indicator illuminates on the display. 1 BEEP ON indicator • Lights when key-touch tone is activated.
9 Indications on the main display • While listening to radio: • While selecting “GAME/AUX” or “USB”: • While playing a disc: • While disc play is stopped: * 1 Disc type is displayed with the following abbreviation: “SV (SVCD)”, “VD (VCD)”, and “CD (CD)”.
10 Daily Operations —Playback ¥ Turn on the power. The standby lamp on the main unit turns off. • Without pressing , the System also turns on by pressing one of the source select buttons in the next step. ø Select the source. Playback automatically starts if the selected source is ready to start playback.
11 Listening to the Radio To select the band (FM/AM) To tune in to a station While FM or AM is selected... When a station (frequency) with sufficient signal strength is tuned in, the frequency search stops. • When you repeatedly press the button, the frequency changes step by step.
12 Playing Back a Disc Before operating a disc, be familiar how a disc is recorded. • DVD Video/DVD-VR comprises of “ Titles ” which includes “ Chapters ,” MP3/WMA comprise of “ Groups ” which includes “ Tracks ,” and CD/SVCD/VCD comprise of only “ Tracks .
13 To select a title/group While playing a disc... To select a chapter/track While playing... To locate a particular portion While playing a disc except MP3/WMA... • No sound comes out while searching on DVD/SVCD/VCD. To return to normal playback, press DISC PLAY 3 .
14 To cancel PBC You can also cancel PBC function by pressing the number button to select a track. To reactivate PBC, press 7 , then press 4 . Playing Back from the PC This System is equipped with a USB terminal on the front panel. You can connect your PC to this terminal and enjoy sound reproduced through your PC.
15 6 Check if the drivers are correctly installed. 1 Open the Control Panel on your PC: Select [Start] = [Settings] = [Control Panel] 2 Click [System] = [Hardware] = [Device Manager] = [Sound, video and game controllers] and [Universal Serial Bus controllers] • The following window appears, and you can check whether the drivers are installed.
16 Daily Operations —Sound and Other Adjustments Adjusting the Volume The volume level can be adjusted in 32 steps (VOL MIN, VOL 1 – VOL 30, VOL MAX). To drop the volume in a moment Reinforcing the Bass Sound To adjust the subwoofer level gradually You can select the subwoofer level from level 0 (minimum) to level 2 (maximum).
17 Making the Center Channel Sound Clear —Clear Voice When a multi-channel disc with center-channel signal is loaded on the current tray, you can increase the output level for the center channel sound. • This function allows you to easily understand the dialogue of DVD Video even with the low volume level.
18 Changing the Picture Tone While showing a playback picture on the TV, you can select the preset picture tone, or adjust it and store your own preference. To select a preset picture tone 1 Activate VFP. 2 Select a preset picture tone. 3 Finish setting.
19 Turning On or Off the Key-Touch Tone • When the key-touch tone is activated, the BEEP ON indicator lights up. Changing the Display Brightness You can dim the display window. Setting the Clock Without setting the build-in clock, you cannot use Daily Timer (see page 33).
20 Unique DVD/VCD Operations Selecting the Sound Track For DVD Video: While playing back a chapter containing multiple audio tracks, you can select the one to listen to. For DVD-VR/SVCD/VCD: When playing back a track, you can select the audio channel to play.
21 Selecting the Subtitle Language For DVD Video: While playing back a chapter (of DVD Video) containing subtitles in different languages, you can select the subtitle language to display on the TV screen. For DVD-VR: While playing, you can turn the subtitle on or off.
22 Special Picture Playback Still picture playback Frame-by-frame playback 1 While playing... 2 Advance the still picture frame by frame. To resume normal playback, press DISC PLAY 3 . Slow-motion playback 1 While playing... 2 Select slow motion speed.
23 Advanced Disc Operations Programming the Playing Order —Program Play You can arrange the playing order of the tracks (up to 99) before you start playback. • Program play cannot be used for DVD-VR disc. 1 Before starting playback, activate Program Play.
24 To check the programmed contents Before or after playback... To modify the program Before or after playback... To exit from Program Play Before or after playback... Playing at Random —Random Pla y You can play the contents of all tracks at random.
25 Playing Repeatedly—Repeat Play You can repeat playback. • You can also select the repeat mode using the on-screen bar (see page 27). • For JPEG and DVD-VR discs, see page 32. • For DVD Video: While playing... Before starting playback... • For MP3/WMA: While playing or before playback.
26 On-Screen Disc Operations 3 / 2 / 5 / ∞ , ENTER ON SCREEN DISC PLA Y 3 REPEA T ZOOM 7 8 ¡ Remote control Number buttons OFF CHAP. DVD-VR PG 2 DISC 1 TIME 0:00:58 CHAP 3 3 12 4 ST TIME ON On-screen bars See also page 27.
27 About the On-screen Bar You can check the information on disc (except for MP3/WMA/JPEG disc) and use some functions through the on-screen bar. Operations Using the On-screen Bar Basic operation procedure through the on-screen bar is as follows: Ex.
28 Changing the time information You can change the time information in the on-screen bar and the display window on the main unit. 1 Display the on-screen bar with the pull-down menu. 2 Make sure is selected (highlighted). 3 Change the time indication.
29 A-B Repeat • A-B repeat is not available for MP3/WMA and some DVDs. 1 While playing, display the on-screen bar with the pull-down menu. 2 Select . 3 Display the pop-up windows. 4 Select “A-B.” 5 Select the start point (A). 6 Select the end point (B).
30 Chapter/Track Search You can search for the chapter (DVD Video/DVD-VR) number to play. 1 While playing, display the on-screen bar with the pull-down menu. 2 Select or . 3 Display the pop-up window. 4 Enter the desired chapter/track number. • To correct a misentry, press the number buttons until the desired number shown in the pop-up window.
31 Control screen for DVD-R/-RW in DVD-VR format The control screen is superimposed on the TV screen when you call up Original Program (PG) or Play List (PL). To select playback type To move the highlight bar between group list and track list • While playing an MP3/WMA disc, selecting list starts playback.
32 To repeat slide-show for JPEG Before starting playback... • For Repeat Play of MP3/WMA, see page 25. To repeat playback for DVD-VR While playing an original program... While playing a Play List... * REPEAT ALL ( ALL) may not be available depending on the disc.
33 Timer Operations Setting the Timer Using Daily Timer, you can wake up with your favorite song. • To correct a misentry during the process, press CANCEL (while holding SHIFT). You can return to the previous step. 1 Select the timer setting mode for Daily Timer—“TIMER ON.
34 5 Select the playback source—“TUNER FM,” “TUNER AM,” “CD,” “AUX,” or “USB.” • When you select “TUNER FM” or “TUNER AM,” repeat the procedure to select a preset station. 6 S elect the volume level. 7 Turn off the System (on standby) if you have set the timer with the System turned on.
35 Set up Menu Operations Operating Procedure You can use the Set up Menus only when a disc is selected as the source and its playback is not yet started. Ex.: Selecting “STILL PICTURE” for “FILE TYPE”: 1 Show the set up menu. 2 Select one of the set up menus.
36 7 Repeat steps 3 to 4 to set other items on the same Set up Menu. Repeat steps 2 to 4 to set other items on another Set up Menu. To remove the Set up Menu 7 LANGUAGE Set up Menu You can select the initial languages for disc playback. You can also select the language shown on the TV screen while operating this System.
37 PICTURE SOURCE You can obtain optimal picture quality by selecting an appropriate option—picture source type (either video source or film source). Select one of the following: SCREEN SAVER You can activate or deactivate screen saver while operating the built-in disc player.
38 D. RANGE COMPRESSION You can compress the dynamic range (the difference between the loudest sound and the softest sound) to enjoy a powerful sound even at a low volume level when listening to Dolby Digital software. This is useful at night. • The effectiveness varies depends on a software.
39 Operating the TV Operating TV You can operate the JVC’s TV using this remote control. To turn on or off the TV: To select the input mode (either TV or VIDEO): To adjust TV v olume: To select the TV channel: TV CH + / – TV VIDEO SHIFT TV TV VOL + / – Remote control Remote ONLY (While holding.
40 Additional Information Learning More about This System Before Operating the System (see page 3) Playable Disc Types: • About audio format – Linear PCM: Uncompressed digital audio, the same format used for CDs and most studio masters.
41 Unique DVD/VCD Operations (see pages 20 to 22) Selecting the Sound Track: On some DVD videos, you cannot change audio languages while playing back. Special Picture Playback: • During slow-motion playback, no sound will be reproduced. • While zoomed in, the picture may look coarse.
42 Maintenance To get the best performance of the System, keep your discs clean. Handling discs • Remove the disc from its case by holding it at the edge while pressing the center hole lightly. • Do not touch the shiny surface of the disc, or bend the disc.
43 USB Operations: Unable to play back through the USB connection. ] USB connection and setting is incorrect (see page 14). The sound through the USB connection stops.
44 Language Code List AA Afar AB Abkhazian AF Afrikaans AM Ameharic AR Arabic AS Assamese AY Aymara AZ Azerbaijani BA Bashkir BE Byelorussian BG Bulgarian BH Bihari BI Bislama BN Bengali, Bangla BO Ti.
45 Parts Index Refer to the pages to see how to use the buttons and controls. Main unit Remote control 19 10, 14, 34 STANDBY lamp 8 12, 25 19 17 39 11, 13, 23, 29, 30 10, 14 10, 11 17 16 35, 36 13, 31.
46 Specifications Amplifier section—CA-HXD77 Output Power: SUBWOOFERS: 180 W per channel, min. RMS, driven into 3 Ω at 63 Hz with no more than 10% total harmonic distortion. MAIN SPEAKERS: 90 W per channel, min. RMS, driven into 6 Ω at 1 kHz with no more than 10% total harmonic distortion.
00-00_Wrranty[J]_f.fm Page 1 Wednesday, February 8, 2006 7:48 PM.
00-00_Wrranty[J]_f.fm Page 2 Wednesday, February 8, 2006 7:48 PM.
0206KMMMDWSAM EN © 2006 Victor Company of Japan, Limited HX-D77 COMPACT COMPONENT SYSTEM 00-00_Cover[J]_f.fm Page 2 Monday, January 16, 2006 8:17 PM.
English Français COMPACT COMPONENT SYSTEM SYSTEME DE COMPOSANTS COMPACT HX-D77 — Consists of CA-HXD77 and SP-HXD77 — Composé du CA-HXD77 et du SP-HXD77 INSTRUCTIONS MANUEL D’INSTRUCTIONS LVT1540-002A [C] CA-HXD77 SP-HXD77 SP-HXD77 00-00_Cover[C]_f.
G-1 Warnings, Cautions and Others Mises en garde, précautions et indications diverses CAUTION To reduce the risk of electrical shocks, fire, etc.: 1 Do not remove screws, covers or cabinet. 2 Do not expose this appliance to rain or moisture. ATTENTION Afin d’éviter tout risque d’électrocution, d’incendie, etc.
G-2 IMPORTANT FOR LASER PRODUCTS 1 CLASS 1 LASER PRODUCT 2 CAUTION : Do not open the top cover. There are no user serviceable parts inside the Unit; leave all servicing to qualified service personnel. 3 CAUTION : Visible and/or invisible class 1M laser radiation when open.
1 English Introduction Precautions Installation • Install in a place which is level, dry and neither too hot nor too cold—between 5°C (41°F) and 35°C (95°F). • Install the System in a location with adequate ventilation to prevent internal heat buildup in the System.
2 English Contents Before Operating the System ....................... 3 Playable Disc Types .................................................... 3 Getting Started .............................................. 4 Step 1 : Unpack ......................
3 English Before Operating the System Playable Disc Types This unit has been designed to play back the following discs: In addition to the above discs, this system can play back audio data recorded on CD Text, CD-G (CD Graphics), and CD-Extra. • The following discs cannot be played back: DVD-RAM, CD-I (CD-I Ready), CD-ROM, Photo CD, SACD, etc.
4 English Getting Started Step 1 : Unpack After unpacking, check to be sure that you have all the following items. The number in parentheses indicates the quantity of each piece supplied.
5 English Step 3 : Hook Up If you need more detailed information, see page 6 and 7. 3-6 Do not connect the AC power cord until all other connections have been made.
6 English ~ To assemble and connect the AM loop antenna To assemble the AM loop antenna To connect the AM loop antenna cords • Make sure the antenna conductors do not touch any other terminals, connecting cords and power cord. Also, keep the antennas away from metallic parts of the System, connecting cords, and the AC power cord.
7 English To select the color system You can select the video output to match it to the color system of your TV. • The color system can be changed only while DVD/CD is selected as the source and playback is stopped. 1 Press NTSC/PAL. 2 Select NTSC or PAL.
8 English Display Indication The indications on the display tell you a lot of things while you are operating the System. Before operating the System, be familiar with when and how the indicator illuminates on the display. 1 BEEP ON indicator • Lights when key-touch tone is activated.
9 English Indications on the main display • While listening to radio: • While selecting “GAME/AUX” or “USB”: • While playing a disc: • While disc play is stopped: * 1 Disc type is displayed with the following abbreviation: “SV (SVCD)”, “VD (VCD)”, and “CD (CD)”.
10 English Daily Operations —Playback ¥ Turn on the power. The standby lamp on the main unit turns off. • Without pressing , the System also turns on by pressing one of the source select buttons in the next step. ø Select the source. Playback automatically starts if the selected source is ready to start playback.
11 English Listening to the Radio To select the band (FM/AM) To tune in to a station While FM or AM is selected... When a station (frequency) with sufficient signal strength is tuned in, the frequency search stops. • When you repeatedly press the button, the frequency changes step by step.
12 English Playing Back a Disc Before operating a disc, be familiar how a disc is recorded. • DVD Video/DVD-VR comprises of “ Titles ” which includes “ Chapters ,” MP3/WMA comprise of “ Groups ” which includes “ Tracks ,” and CD/SVCD/VCD comprise of only “ Tracks .
13 English To select a title/group While playing a disc... To select a chapter/track While playing... To locate a particular portion While playing a disc except MP3/WMA... • No sound comes out while searching on DVD/SVCD/VCD. To return to normal playback, press DISC PLAY 3 .
14 English To cancel PBC You can also cancel PBC function by pressing the number button to select a track. To reactivate PBC, press 7 , then press 4 . Playing Back from the PC This System is equipped with a USB terminal on the front panel. You can connect your PC to this terminal and enjoy sound reproduced through your PC.
15 English 6 Check if the drivers are correctly installed. 1 Open the Control Panel on your PC: Select [Start] = [Settings] = [Control Panel] 2 Click [System] = [Hardware] = [Device Manager] = [Sound,.
16 English Daily Operations —Sound and Other Adjustments Adjusting the Volume The volume level can be adjusted in 32 steps (VOL MIN, VOL 1 – VOL 30, VOL MAX). To drop the volume in a moment Reinforcing the Bass Sound To adjust the subwoofer level gradually You can select the subwoofer level from level 0 (minimum) to level 2 (maximum).
17 English Making the Center Channel Sound Clear —Clear Voice When a multi-channel disc with center-channel signal is loaded on the current tray, you can increase the output level for the center channel sound. • This function allows you to easily understand the dialogue of DVD Video even with the low volume level.
18 English Changing the Picture Tone While showing a playback picture on the TV, you can select the preset picture tone, or adjust it and store your own preference. To select a preset picture tone 1 Activate VFP. 2 Select a preset picture tone. 3 Finish setting.
19 English Turning On or Off the Key-Touch Tone • When the key-touch tone is activated, the BEEP ON indicator lights up. Changing the Display Brightness You can dim the display window. Setting the Clock Without setting the build-in clock, you cannot use Daily Timer (see page 33).
20 English Unique DVD/VCD Operations Selecting the Sound Track For DVD Video: While playing back a chapter containing multiple audio tracks, you can select the one to listen to. For DVD-VR/SVCD/VCD: When playing back a track, you can select the audio channel to play.
21 English Selecting the Subtitle Language For DVD Video: While playing back a chapter (of DVD Video) containing subtitles in different languages, you can select the subtitle language to display on the TV screen. For DVD-VR: While playing, you can turn the subtitle on or off.
22 English Special Picture Playback Still picture playback Frame-by-frame playback 1 While playing... 2 Advance the still picture frame by frame. To resume normal playback, press DISC PLAY 3 . Slow-motion playback 1 While playing... 2 Select slow motion speed.
23 English Advanced Disc Operations Programming the Playing Order —Program Play You can arrange the playing order of the tracks (up to 99) before you start playback. • Program play cannot be used for DVD-VR disc. 1 Before starting playback, activate Program Play.
24 English To check the programmed contents Before or after playback... To modify the program Before or after playback... To exit from Program Play Before or after playback... Playing at Random —Random Pla y You can play the contents of all tracks at random.
25 English Playing Repeatedly—Repeat Play You can repeat playback. • You can also select the repeat mode using the on-screen bar (see page 27). • For JPEG and DVD-VR discs, see page 32. • For DVD Video: While playing... Before starting playback.
26 English On-Screen Disc Operations 3 / 2 / 5 / ∞ , ENTER ON SCREEN DISC PLA Y 3 REPEA T ZOOM 7 8 ¡ Remote control Number buttons OFF CHAP. DVD-VR PG 2 DISC 1 TIME 0:00:58 CHAP 3 3 12 4 ST TIME ON On-screen bars See also page 27.
27 English About the On-screen Bar You can check the information on disc (except for MP3/WMA/JPEG disc) and use some functions through the on-screen bar. Operations Using the On-screen Bar Basic operation procedure through the on-screen bar is as follows: Ex.
28 English Changing the time information You can change the time information in the on-screen bar and the display window on the main unit. 1 Display the on-screen bar with the pull-down menu. 2 Make sure is selected (highlighted). 3 Change the time indication.
29 English A-B Repeat • A-B repeat is not available for MP3/WMA and some DVDs. 1 While playing, display the on-screen bar with the pull-down menu. 2 Select . 3 Display the pop-up windows. 4 Select “A-B.” 5 Select the start point (A). 6 Select the end point (B).
30 English Chapter/Track Search You can search for the chapter (DVD Video/DVD-VR) number to play. 1 While playing, display the on-screen bar with the pull-down menu.
31 English Control screen for DVD-R/-RW in DVD-VR format The control screen is superimposed on the TV screen when you call up Original Program (PG) or Play List (PL). To select playback type To move the highlight bar between group list and track list • While playing an MP3/WMA disc, selecting list starts playback.
32 English To repeat slide-show for JPEG Before starting playback... • For Repeat Play of MP3/WMA, see page 25. To repeat playback for DVD-VR While playing an original program... While playing a Play List... * REPEAT ALL ( ALL) may not be available depending on the disc.
33 English Timer Operations Setting the Timer Using Daily Timer, you can wake up with your favorite song. • To correct a misentry during the process, press CANCEL (while holding SHIFT). You can return to the previous step. 1 Select the timer setting mode for Daily Timer—“TIMER ON.
34 English 5 Select the playback source—“TUNER FM,” “TUNER AM,” “CD,” “AUX,” or “USB.” • When you select “TUNER FM” or “TUNER AM,” repeat the procedure to select a preset station. 6 S elect the volume level. 7 Turn off the System (on standby) if you have set the timer with the System turned on.
35 English Set up Menu Operations Operating Procedure You can use the Set up Menus only when a disc is selected as the source and its playback is not yet started. Ex.: Selecting “STILL PICTURE” for “FILE TYPE”: 1 Show the set up menu. 2 Select one of the set up menus.
36 English 7 Repeat steps 3 to 4 to set other items on the same Set up Menu. Repeat steps 2 to 4 to set other items on another Set up Menu. To remove the Set up Menu 7 LANGUAGE Set up Menu You can select the initial languages for disc playback. You can also select the language shown on the TV screen while operating this System.
37 English PICTURE SOURCE You can obtain optimal picture quality by selecting an appropriate option—picture source type (either video source or film source). Select one of the following: SCREEN SAVER You can activate or deactivate screen saver while operating the built-in disc player.
38 English D. RANGE COMPRESSION You can compress the dynamic range (the difference between the loudest sound and the softest sound) to enjoy a powerful sound even at a low volume level when listening to Dolby Digital software. This is useful at night.
39 English Operating the TV Operating TV You can operate the JVC’s TV using this remote control. To turn on or off the TV: To select the input mode (either TV or VIDEO): To adjust TV v olume: To select the TV channel: TV CH + / – TV VIDEO SHIFT TV TV VOL + / – Remote control Remote ONLY (While holding.
40 English Additional Information Learning More about This System Before Operating the System (see page 3) Playable Disc Types: • About audio format – Linear PCM: Uncompressed digital audio, the same format used for CDs and most studio masters.
41 English Unique DVD/VCD Operations (see pages 20 to 22) Selecting the Sound Track: On some DVD videos, you cannot change audio languages while playing back. Special Picture Playback: • During slow-motion playback, no sound will be reproduced. • While zoomed in, the picture may look coarse.
42 English Maintenance To get the best performance of the System, keep your discs clean. Handling discs • Remove the disc from its case by holding it at the edge while pressing the center hole lightly. • Do not touch the shiny surface of the disc, or bend the disc.
43 English USB Operations: Unable to play back through the USB connection. ] USB connection and setting is incorrect (see page 14). The sound through the USB connection stops. ] Noise and static electricity may stop the sound through the USB connection.
44 English Language Code List AA Afar AB Abkhazian AF Afrikaans AM Ameharic AR Arabic AS Assamese AY Aymara AZ Azerbaijani BA Bashkir BE Byelorussian BG Bulgarian BH Bihari BI Bislama BN Bengali, Bang.
45 English Parts Index Refer to the pages to see how to use the buttons and controls. Main unit Remote control 19 10, 14, 34 19 17 39 11, 13, 23, 29, 30 10, 14 10, 11 17 16 35, 36 13, 31 17 16 16 13, .
46 English Specifications Amplifier section—CA-HXD77 Output Power: SUBWOOFERS: 180 W per channel, min. RMS, driven into 3 Ω at 63 Hz with no more than 10% total harmonic distortion. MAIN SPEAKERS: 90 W per channel, min. RMS, driven into 6 Ω at 1 kHz with no more than 10% total harmonic distortion.
0206KMMMDWSAM EN, FR © 2006 Victor Company of Japan, Limited HX-D77 COMPACT COMPONENT SYSTEM 00-00_Cover[C]_f.fm Page 2 Monday, January 16, 2006 7:52 PM.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté JVC HX-D77 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du JVC HX-D77 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation JVC HX-D77, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le JVC HX-D77 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le JVC HX-D77, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du JVC HX-D77.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le JVC HX-D77. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei JVC HX-D77 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
