Manuel d'utilisation / d'entretien du produit HR-J435EA du fabricant JVC
Aller à la page of 31
H R-J435EA VIDEO CASSETTE RECORDER INSTRUCTIONS PU30425-1841 PAL OPERATE PROG. TV/VIDEO PICTURE DISPLAY 12 3 45 6 78 9 DAILY(M-F) WEEKLY ADD AUX START TIMER 0 CANCEL C.RESET VOL. TV PROG. REMOTE CONTROL UNIT OK TV C.MEMORY CLOCK Press and hold TV button while pressing OPERATE, TV PROG.
2 SAFETY FIRST Safety Precautions The rating plate and the safety caution are on the rear of the unit. W ARNING: DANGEROUS VOL T AGE INSIDE W ARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
3 Basic Connections CHECK CONTENTS 1 Make sure the package contains all of the accessories listed in “Specifications” ( Z pg. 30). SITUA TE RECORDER 2 Place the recorder on a stable, horizontal surface. CONNECT RECORDER TO TV 3 The connection method you use depends on the type of TV you have.
4 INST ALLING YOUR NEW RECORDER (cont.) T une The TV T o Y our V ideo Recorder TURN ON THE RECORDER 1 Press OPERA TE . SELECT OUTPUT MODE 2 Set the TEST switch on the back of the recorder to ON. SET TV CHANNEL 3 Set your TV to the video channel (UHF channel 37).
5 q 6 5 / 8 2 3 On-Screen Displays The superimposed indication on the TV screen tells you what the recorder is doing. 1– Operation mode indicators 2– Channel position number/Aux.
6 T uner Set INITIAL SETTINGS (cont.) Y our recorder needs to memorise all necessary stations in channel positions in order to record TV programmes. Once stored, you can call them up with the TV PROG. buttons without going through any vacant channels.
7 SELECT POSITION 6 Press TV PROG. 5 / ∞ until an open position in which you want to store a channel appears, then press OK . STORE CHANNEL 7 If fine tuning is not necessary , simply press STORE . For fine tuning adjustment, press TV PROG. 5 / ∞ until the picture becomes clearer, then press STORE .
8 INITIAL SETTINGS (cont.) Fine-T uning Channels Already Stored TURN ON THE RECORDER 1 Press OPERA TE . ACCESS CHANNEL SET MODE SELECT SCREEN 2 Press and hold CH SET for more than 2 seconds. The Channel Set Mode Select screen appears. SELECT MODE 3 Press TV PROG.
9 q 6 5 / 8 2 3 Clock Set 12 3 45 6 78 9 0 T urn on the TV and select the VIDEO channel (or AV mode). NOTE: If, in step 7 , the year digits are automatically cleared, it is possible that you have input 29th February for a non-leap year .
10 PLA YBACK Basic Playback The easiest, most basic operation possible with your video recorder is tape playback. Already-recorded signals on a video tape are read by your video recorder and displayed on your TV just like a TV programme.
11 Playback Features High-Speed Search ACTIV A TE HIGH-SPEED SEARCH 1 Press FF for forward high-speed sear ch, or REW for reverse high-speed sear ch. ● For short searches, press and hold FF or REW for over 2 seconds. When released, normal playback resumes.
12 q 6 5 / 8 2 3 PLA YBACK (cont.) Instant ReView Simply by pressing a single button, the recorder power comes on, rewinds, and begins playback of the last timer -recorded programme. If you have several programmes recorded, you can easily access any of them.
13 T ape Position Indicator The tape position indicator appears on screen when, from the Stop mode, you press FF , REW or perform an Index Sear ch. The position of “ 5 ” in relation to “0” (beginning) or “+” (end) shows you where you are on the tape.
14 TV signals being received by the recorder ’s built-in tuner can be recorded onto a video tape. Y ou can “capture” a TV programme using your video recorder .
15 Record One Pr ogramme While W atching Another SELECT CHANNEL TO W A TCH 1 Once recording is in progress, all you need to do is to set the channel controls on the TV for the station you wish to view . ● The programme selected with the TV’ s channel controls appears on the TV screen while the one selected with the TV PROG .
16 The G-Code timer programming system eliminates the need to input channel, date, start and stop time data when setting the timer record function. Simply key in the G-Code number for the TV program you wish to record (found in most TV listings) and the recorder’s timer is automatically programmed.
17 ST AR T SETTING 3 Press OK . ● The GUIDE PROG. number starts blinking. INPUT GUIDE PROG. NUMBER 4 Press TV PROG. 5∞ to input the Guide Prog. number , then press OK . ● The TV PROG. number starts blinking. INPUT RECEIVING CHAN- NEL (TV PROG.) NUMBER 5 Press TV PROG.
18 G-Code Timer Pr ogramming TIMER RECORDING (cont.) Before performing G-Code timer recording, be sure to read "G-Code Setup" ( Z pg. 16). Before performing the following steps: ● Insert a cassette with the safety tab in place. The recorder will come on automatically .
19 NOTES: ● Y ou can programme this recorder to timer -record as many as 8 programmes. T o record the extra programme, you must first cancel any unnecessary programmes ( Z pg. 21, "Check And Cancel Programmes"). ● For safety , your recorder disables all other functions while in the T imer mode.
20 Regular Timer Pr ogramming Before performing the following steps: ● Insert a cassette with the safety tab in place. The recorder will come on automatically . ● T urn on the TV and select the VIDEO channel (or A V mode). Remember , the clock must be set before you can programme the timer ( Z pg.
21 ENTER CHANNEL POSITION 6 Press TV PROG. 5 / ∞ to select the channel you wish to record. SET T APE SPEED 7 Press SP/LP to set the tape speed. ● For each additional programme, press PROG. and repeat steps 3 – 7 . RETURN TO NORMAL SCREEN 8 Press PROG.
22 EDITING Edit T o Or Fr om Another V ideo Recorder Y ou can use your video recorder as the source player or the recording deck. MAKE CONNECTIONS 1 Connect the player’s AUDIO/VIDEO OUT connector to the recorder’ s AUDIO/VIDEO IN connector .
23 q 6 5 / 8 2 3 Y ou can use a camcorder as the source player and your video recorder as the recorder . Edit Fr om A Camcorder MAKE CONNECTIONS 1 Connect the camcorder’s AUDIO/VIDEO OUT connectors to the recorder ’ s front panel AUDIO/VIDEO input connectors.
24 TROUBLESHOOTING Before requesting service for a problem, use this chart and see if you can repair the trouble yourself. Small problems are often easily corrected, and this can save you the trouble of sending your video recorder off for repair . POSSIBLE CAUSE ● The mains power cord is discon- nected.
25 TIMER RECORDING CORRECTIVE ACTION Re-perform the clock and/or timer settings. Press TIMER and confirm that “TIMER“ is displayed on the display panel. T imer programming can’t be performed while a timer recording is in progress. W ait until it finishes.
26 PLA YBACK Q. What happens if the end of the tape is reached during playback or search? A. The tape is automatically rewound to the beginning. Q. Can the video recorder indefinitely remain in the still mode? A. No. It stops automatically after 5 minutes to protect the heads.
27 FRONT VIEW 1 OPERA TE Button ( Z pg. 4) 2 Cassette Loading Slot 3 CH SET Button ( Z pg. 6) 4 Rewind [REW] Button ( Z pg. 10) 5 PLA Y Button ( Z pg. 10) OK Button ( Z pg. 6) 6 Fast Forward [FF] Button ( Z pg. 10) 7 VIDEO and AUDIO Input Connectors ( Z pg.
28 DISPLA Y P ANEL REC TIMER PLAY M SP LP 1 7 5 2 3 6 4 5 ”Cassette Loaded” Mark 6 Counter Memory Indicator ( Z pg. 13) 7 ”T imer” Indicator ( Z pg. 18) 1 PLA Y Indicator ( Z pg. 10) 2 REC Indicator ( Z pg. 14) 3 T ape Speed Indicators ( Z pg.
29 OPERATE PROG. TV/VIDEO PICTURE DISPLAY 12 3 45 6 78 9 DAILY(M-F) WEEKLY ADD AUX START TIMER 0 CANCEL C.RESET VOL. TV PROG. REMOTE CONTROL UNIT OK TV C.
30 GENERAL Power requirement : AC 220 – 240 V ` , 50/60 Hz Power consumption : 17 W T emperature Operating : 5°C to 40°C Storage : –20°C to 60°C Operating position : Horizontal only Dimensions (WxHxD) : 400 x 94 x 276 mm W eight : 3.6 kg Format : VHS standard Maximum recording time (SP) : 240 min.
HR-J435EA COPYRIGHT © 1996 VICTOR COMPANY OF JAPAN, LTD. EA Printed in Malaysia 0796YOV * UN * PJ VICTOR COMP ANY OF JAPAN, LIMITED.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté JVC HR-J435EA c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du JVC HR-J435EA - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation JVC HR-J435EA, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le JVC HR-J435EA va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le JVC HR-J435EA, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du JVC HR-J435EA.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le JVC HR-J435EA. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei JVC HR-J435EA ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.