Manuel d'utilisation / d'entretien du produit GVT0131-010A du fabricant JVC
Aller à la page of 166
MICRO COMPONENT SYSTEM UX-S77 —Consists of CA-UXS77 and SP-UXS77 CA-UXS77 SP-UXS77 — INSTRUCTIONS GVT0131-010A [US/UN] g English DIGITAL.
G-1 Warnings, Cautions and Others CAUTION—STANDBY/ON button! Disconnect the mains plug to shut the power off completely (all lamps and indications go off). The STANDBY/ON button in any position does not disconnect the mains line. • When the unit is on standby, the STANDBY/ON lamp lights in red.
G-2 Caution: Proper Ventilation To avoid risk of electric shock and fire, and to prevent damage, locate the apparatus as follows 1. Front:No obstructions and open spacing. 2. Sides/ Top/ Back:No obstructions should be placed in the areas shown by the dimensions below.
G-3 IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION : Do not open the top cover. There are no user serviceable parts inside the Unit; leave all servicing to qualified service personnel. 3. CAUTION : Visible and invisible laser radiation when open and interlock failed or defeated.
1 English Contents Introduction ............................................................ 2 Precautions .......................................................................... 2 How to Read This Manual ...........................................
2 English Introduction Precautions Installation • Install in a place which is level, dry and neither too hot nor too cold—between 5°C and 35°C. • Install the System in a location with adequate ventilation to prevent internal heat buildup in the System.
3 English Getting Started Step 1 : Unpack After unpacking, check to be sure that you have all the following items. The number in parentheses indicates the quantity of each piece supplied.
4 English Step 3 : Hook Up If you need more detailed information, see page 6. TV AUX DECODER AUDIO OUT P B P R Y OPTICAL DIGITAL IN AV COMPU LINK VIDEO INPUT VIDEO INPUT VIDEO INPUT Illustrations of the input/output terminals below are typical examples.
5 English LOW HIGH P USH OPEN AUTO REVERSE S-VIDEO VIDEO NTSC VIDEO OUT SELECTER PAL VOLT AGE SELECTOR 220V— 230V 127V 110V FM antenna (supplied) Extend it so that you can obtain the best reception. AM loop antenna Keep it connected. Vynile-covered wire (not supplied) Extend it horizontally.
6 English To assemble and connect the AM loop antenna To assemble the AM loop antenna To connect the AM loop antenna • If the AM loop antenna wire or speaker cords are covered with vinyl, remove the vinyl to expose the tip of the antenna by twisting the vinyl.
7 English To connect the AV COMPU LINK cords This system allows you to use JVC’s TV with simple operations; by starting playing back a disc, the TV automatically turns on and changes the input mode to the appropriate position so that you can view the playback picture.
8 English Before Operating the System Playable Disc Types This unit has been designed to play back the following discs: In addition to the above discs, this system can play back audio data recorded on CD Text, CD-G (CD Graphics), and CD-Extra.
9 English Parts Index Refer to the pages to see how to use the buttons and controls. DISPLA Y SLEEP SET CLOCK/ TIMER FADE MUTING REPEAT A-B REPEA T REV .
10 English Display Indicators The indications on the display teach you a lot of things while you are operating the System. Before operating the System, be familiar with when and how the indicator illuminates on the display. 1 Disc tray indicators • 1-5: Disc tray number indicators.
11 English Indications on the main display while operating a disc • If Resume is turned “ON” (see page 40), “RESUME” appears when you stop playback (except for Audio CD and MP3/ WMA/JPEG discs).
12 English Daily Operations —Playback 1 Turn on the power. The STANDBY/ON lamp on the main unit lights in green. • Without pressing STANDBY/ON , the System turns on by pressing one of the source selecting buttons in the next step. 2 Select the source.
13 English Listening to the Radio To select the AM tuner interval spacing Some countries space AM stations 9 kHz spacing, and other countries use 10 kHz spacing. You can change the AM tuner intervals while the System is on stand by and the last selected source is AM.
14 English Playing Back a Disc Before operating a disc, be familiar how a disc is recorded. • DVD Video comprises of “ Titles ” which includes “ Chapters ,” DVD Audio/MP3/WMA comprise of “ Groups ” which include “ Tracks ,” and CD/SVCD/VCD comprise of only “ Tracks .
15 English To locate a particular portion While playing a disc except MP3/WMA... • No sound comes out while searching on DVD Video/ SVCD/VCD. To return to normal playback, press DVD/CD 3 . To locate an item directly You can select a title/chapter/track directly and start playback.
16 English 7 For SVCD/VCD with PBC: While playing a disc with PBC, “PBC” appears on the display. When disc menu appears on the TV screen, select an item on the menu. Playback of the selected item starts. To cancel PBC • You can also cancel PBC function by pressing the number button to select a track.
17 English Daily Operations —Sound&Other Adjustments Adjusting the Volume You can adjust the volume level from level 0 (VOL MIN) to level 50 (VOL MAX). To drop the volume in a moment Adjusting the Sound To emphasize rhythm feeling—RHYTHM AX This function emphasizes bass attack feeling.
18 English Presetting Automatic DVD Sound Increase Level The DVD sound is sometimes recorded at a lower level than for other discs and sources. You can set the increase level for the currently loaded DVD, so you do not have to adjust the volume every time you change the source.
19 English To adjust the picture tone 1 Select “USER1” or “USER2.” • Follow steps 1 and 2 explained on page 18. 2 Select a parameter you want to adjust. 3 Adjust the parameter. 4 Repeat steps 2 to 3 to adjust other parameters. To erase the screen, press VFP again while holding SHIFT.
20 English Turning Off the Power Automatically To turn off the unit after playback is over—Auto Standby When Auto Standby is in use, the A.STANDBY indicator lights on the display. When disc or tape play stops, the A.STANDBY indicator starts flashing.
21 English Unique DVD/VCD Operations Selecting the Sound Track For DVD Video: While playing back a chapter containing audio languages, you can select the language to listen to. For DVD Audio: While playing back a track containing audio channels, you can select the audio channel to listen to.
22 English Selecting the Subtitle Language For DVD Video: While playing back a chapter containing subtitles in different languages, you can select the subtitle language to display on the TV screen. For SVCD: While playing, you can select the subtitles even if no subtitles are recorded on the disc.
23 English Selecting Browsable Still Pictures While playing back a track (of DVD Audio) linked to browsable still pictures (BSP), you can select the still picture (turn the page) to be shown on the TV screen. • If a track is linked to browsable still pictures (BSP), they are usually shown in turn automatically during playback.
24 English Advanced Disc Operations Programming the Playing Order— Program Play You can arrange the playing order of the chapters or tracks (up to 99) before you start playback. 1 Before starting playback, activate Program Play. 2 Select chapters or tracks you want for Program Play.
25 English 4 Start playback. To check the programmed contents Before or after playback... To modify the program Before or after playback... To exit from Program Play Before or after playback... Playing at Random—Random Play You can play the chapters or tracks of all loaded discs at random.
26 English Playing Repeatedly • You can also select the repeat mode using the on-screen bar (see page 28). Repeat Play You can repeat playback. • For DVD Video: While playing... Before starting playback... • For DVD Audio: While playing or before playback.
27 English On-Screen Disc Operations On-screen Bar Information You can check the disc information (except for MP3/WMA/ JPEG disc) and use some functions through the on-screen bar. 2 OFF 1/3 1/3 1/3 TIME 4 TITLE 14 TOT AL 1:25:58 CHAP 23 DVD-VIDEO TITLE 2 TIME OFF CHAP .
28 English Operations Using the On-screen Bar Ex.: Selecting a subtitle (French) for DVD Video: While a disc is selected as the source... 1 Display the on-screen bar with the pull-down menu. 2 Select (highlight) the item you want. 3 Display the pop-up window.
29 English 4 Select the repeat mode you want. * During Program Play and Random Play, “STEP” appears. 5 Finish the setting. A-B Repeat • See also page 26. 1 While playing, display the on-screen bar with the pull- down menu. 2 Select . 3 Display the pop-up window.
30 English 4 Enter the desired chapter/track number. • To correct a misentry, press the 10 keys until the desired number shown in the pop-up window. 5 Finish the setting. Operations on t he CONTROL Screen The CONTROL screen automatically appears on the TV screen when you load an MP3, WMA, or JPEG disc.
31 English To move the highlight bar between group list and track list To select a group/track in the list To start playback • Once you start playing back a JPEG track, the CONTROL screen goes off. • To cancel slide-show, and display the current still picture, press ENTER.
32 English Advanced Tape Operations Recording on a Tape You can use type I tapes for recording. • To play a tape, see page 16. 1 Insert a recordable cassette. 2 Check the tape running direction and Reverse mode settings on the display. To change the direction To change the Reverse mode if necessary 7 SHIFT REV.
33 English 3 Select and start playing the source—“FM,” “AM,” “DVD/CD,” or “AUX.” • When recording a disc, you can also use “Synchronized Disc Recording” (see below). 4 Start recording. • While recording a disc, recording stops automatically after the disc player plays back the disc.
34 English To record only your favorite track You can specify tracks to be recorded on the tape while listening to a disc. • This function is not available for DVD Video. 1 Start playing a disc. 2 While a track you want to record on the tape is playing.
35 English Timer Operations Setting the Timer Using Daily Timer, you can wake up with your favorite music. On the other hand, with Recording Timer, you can make a tape of a radio broadcast automatically.
36 English 3 For Daily Timers: Select the playback source— “TUNER FM,” “TUNER AM,” “TAPE,” “DISC” or “AUX.” For Recording Timer: Select the playback source—“TUNER FM,”“TUNER AM” or “AUX.” 4 For “TUNER FM” and “TUNER AM”: Select a preset channel.
37 English Setup Menu Operations . Operating Procedure You can use the Setup Menus only when a disc is selected as the source and its playback is not yet started. Ex.: Selecting “STILL PICTURE” for “FILE TYPE”: 1 Display the Setup Menu. 2 Select one of the Setup Menus.
38 English 6 Finish the setting. 7 Repeat steps 3 to 4 to set other items on the same Setup Menu. Repeat steps 2 to 4 to set other items on another Setup Menu. To erase the Setup Menu 7 LANGUAGE Setup Menu You can select the initial languages for disc playback.
39 English PICTURE SOURCE You can obtain optimal picture quality by selecting an appropriate option—picture source type (either video source or film source). Select one of the following: SCREEN SAVER You can activate or deactivate screen saver while operating the built-in disc player.
40 English D. RANGE COMPRESSION You can compress the dynamic range (the difference between the loudest sound and the softest sound) to enjoy a powerful sound even at a low volume level when listening to Dolby Digital software. This is useful at night.
41 English Restricting the Review —Parental Lock You can restrict playback of DVD Video containing violent scenes and those unsuitable for your family members.
42 English To change the setting 1 Display the PARENTAL LOCK sub menu. • Follow steps 1 to 4 of “To set Parental Lock”. “PASSWORD” is automatically selected. • You cannot select any item other than “EXIT” until you enter the correct password.
43 English Additional Information Learning More about This System Getting Started (see pages 3 to 7) Changing the Scanning Mode: • To enjoy the progressive video picture, connect a TV with the progressive video input using component video cord.
44 English • You cannot use Program Play and Random Play for JPEG discs. • You cannot eject tray while in Program Play. Playing at Random—Random Play: • The 4 button does not work for skipping chapters or tracks, but only work for going back to the beginning of the current chapter or track.
45 English Maintenance To get the best performance of the System, keep your discs and mechanism clean. Handling discs • When removing the disc from its case, hold it at the edge while pressing the center hole lightly. • Do not touch the shiny surface of the disc, or bend the disc.
46 English Troubleshooting If you are having a problem with your System, check this list for a possible solution before calling for service. General: Adjustments or settings are suddenly canceled before you finish. ] There is a time limit. Repeat the procedure again.
47 English Language Code List AA Afar AB Abkhazian AF Afrikaans AM Ameharic AR Arabic AS Assamese AY Aymara AZ Azerbaijani BA Bashkir BE Byelorussian BG Bulgarian BH Bihari BI Bislama BN Bengali, Bang.
48 English Country/Area Codes List √ AD Andorra AE United Arab Emirates AF Afghanistan AG Antigua and Barbuda AI Anguilla AL Albania AM Armenia AN Netherlands Antilles AO Angola AQ Antarctica AR Arg.
49 English NP Nepal NR Nauru NU Niue NZ New Zealand OM Oman PA Panama PE Peru PF French Polynesia PG Papua New Guinea PH Philippines PK Pakistan PL Poland PM Saint Pierre and Miquelon PN Pitcairn PR P.
50 English Specifications Amplifier section Output Power: HIGH: 40 W (20 W+ 20 W) at 4 Ω (10% THD) 50 W (25 W+ 25 W) at 4 Ω (10% MAX) LOW: 40 W (20 W+ 20 W) at 4 Ω (10% THD) 50 W (25 W+ 25 W) at.
VICTOR COMP ANY OF JAP AN , LIMITED 0404AIMMDWJEM EN, CS © 2004 VICTOR COMPANY OF JAPAN, LIMITED UX-S77 MICRO COMPONENT SYSTEM Mains (AC) Line Instruction (not applicable for Europe, U.
MICRO COMPONENT SYSTEM SISTEMAS DE MICROCOMPONENTES SISTEMA DE MICRO COMPONENTES UX-S77 —Consists of CA-UXS77 and SP-UXS77 INSTRUCTIONS MANUAL DE INSTRUCCIONES INSTRUÇÕES GVT0131-004A [UW] DIGITAL.
G-1 Warnings, Cautions and Others Avisos, precauciones y otras notas Advertências, precauções e outras notas CAUTION—STANDBY/ON button! Disconnect the mains plug to shut the power off completely (all lamps and indications go off). The STANDBY/ON button in any position does not disconnect the mains line.
G-2 CAUTION: Proper Ventilation To avoid risk of electric shock and fire, and to prevent damage, locate the apparatus as follows: 1. Front: No obstructions and open spacing. 2. Sides/ Top/ Back: No obstructions should be placed in the areas shown by the dimensions below.
G-3 IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION : Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel. 3. CAUTION : Visible and invisible laser radiation when open and interlock failed or defeated.
1 English Contents Introduction ............................................................ 2 Precautions .......................................................................... 2 How to Read This Manual ...........................................
2 English Introduction Precautions Installation • Install in a place which is level, dry and neither too hot nor too cold—between 5°C and 35°C. • Install the System in a location with adequate ventilation to prevent internal heat buildup in the System.
3 English Getting Started Step 1 : Unpack After unpacking, check to be sure that you have all the following items. The number in parentheses indicates the quantity of each piece supplied.
4 English Step 3 : Hook Up If you need more detailed information, see page 6. TV AUX DECODER AUDIO OUT P B P R Y OPTICAL DIGITAL IN AV COMPU LINK VIDEO INPUT VIDEO INPUT VIDEO INPUT Illustrations of the input/output terminals below are typical examples.
5 English LOW HIGH P USH OPEN AUTO REVERSE S-VIDEO VIDEO NTSC VIDEO OUT SELECTER PAL VOLT AGE SELECTOR 220V— 230V 127V 110V FM antenna (supplied) Extend it so that you can obtain the best reception. AM loop antenna Keep it connected. Vynile-covered wire (not supplied) Extend it horizontally.
6 English To assemble and connect the AM loop antenna To assemble the AM loop antenna To connect the AM loop antenna • If the AM loop antenna wire or speaker cords are covered with vinyl, remove the vinyl to expose the tip of the antenna by twisting the vinyl.
7 English To connect the AV COMPU LINK cords This system allows you to use JVC’s TV with simple operations; by starting playing back a disc, the TV automatically turns on and changes the input mode to the appropriate position so that you can view the playback picture.
8 English Before Operating the System Playable Disc Types This unit has been designed to play back the following discs: In addition to the above discs, this system can play back audio data recorded on CD Text, CD-G (CD Graphics), and CD-Extra.
9 English Parts Index Refer to the pages to see how to use the buttons and controls. DISPLA Y SLEEP SET CLOCK/ TIMER FADE MUTING REPEAT A-B REPEA T REV .
10 English Display Indicators The indications on the display teach you a lot of things while you are operating the System. Before operating the System, be familiar with when and how the indicator illuminates on the display. 1 Disc tray indicators • 1-5: Disc tray number indicators.
11 English Indications on the main display while operating a disc • If Resume is turned “ON” (see page 40), “RESUME” appears when you stop playback (except for Audio CD and MP3/ WMA/JPEG discs).
12 English Daily Operations —Playback 1 Turn on the power. The STANDBY/ON lamp on the main unit lights in green. • Without pressing STANDBY/ON , the System turns on by pressing one of the source selecting buttons in the next step. 2 Select the source.
13 English Listening to the Radio To select the AM tuner interval spacing Some countries space AM stations 9 kHz spacing, and other countries use 10 kHz spacing. You can change the AM tuner intervals while the System is on stand by and the last selected source is AM.
14 English Playing Back a Disc Before operating a disc, be familiar how a disc is recorded. • DVD Video comprises of “ Titles ” which includes “ Chapters ,” DVD Audio/MP3/WMA comprise of “ Groups ” which include “ Tracks ,” and CD/SVCD/VCD comprise of only “ Tracks .
15 English To locate a particular portion While playing a disc except MP3/WMA... • No sound comes out while searching on DVD Video/ SVCD/VCD. To return to normal playback, press DVD/CD 3 . To locate an item directly You can select a title/chapter/track directly and start playback.
16 English 7 For SVCD/VCD with PBC: While playing a disc with PBC, “PBC” appears on the display. When disc menu appears on the TV screen, select an item on the menu. Playback of the selected item starts. To cancel PBC • You can also cancel PBC function by pressing the number button to select a track.
17 English Daily Operations —Sound&Other Adjustments Adjusting the Volume You can adjust the volume level from level 0 (VOL MIN) to level 50 (VOL MAX). To drop the volume in a moment Adjusting the Sound To emphasize rhythm feeling—RHYTHM AX This function emphasizes bass attack feeling.
18 English Presetting Automatic DVD Sound Increase Level The DVD sound is sometimes recorded at a lower level than for other discs and sources. You can set the increase level for the currently loaded DVD, so you do not have to adjust the volume every time you change the source.
19 English To adjust the picture tone 1 Select “USER1” or “USER2.” • Follow steps 1 and 2 explained on page 18. 2 Select a parameter you want to adjust. 3 Adjust the parameter. 4 Repeat steps 2 to 3 to adjust other parameters. To erase the screen, press VFP again while holding SHIFT.
20 English Turning Off the Power Automatically To turn off the unit after playback is over—Auto Standby When Auto Standby is in use, the A.STANDBY indicator lights on the display. When disc or tape play stops, the A.STANDBY indicator starts flashing.
21 English Unique DVD/VCD Operations Selecting the Sound Track For DVD Video: While playing back a chapter containing audio languages, you can select the language to listen to. For DVD Audio: While playing back a track containing audio channels, you can select the audio channel to listen to.
22 English Selecting the Subtitle Language For DVD Video: While playing back a chapter containing subtitles in different languages, you can select the subtitle language to display on the TV screen. For SVCD: While playing, you can select the subtitles even if no subtitles are recorded on the disc.
23 English Selecting Browsable Still Pictures While playing back a track (of DVD Audio) linked to browsable still pictures (BSP), you can select the still picture (turn the page) to be shown on the TV screen. • If a track is linked to browsable still pictures (BSP), they are usually shown in turn automatically during playback.
24 English Advanced Disc Operations Programming the Playing Order— Program Play You can arrange the playing order of the chapters or tracks (up to 99) before you start playback. 1 Before starting playback, activate Program Play. 2 Select chapters or tracks you want for Program Play.
25 English 4 Start playback. To check the programmed contents Before or after playback... To modify the program Before or after playback... To exit from Program Play Before or after playback... Playing at Random—Random Play You can play the chapters or tracks of all loaded discs at random.
26 English Playing Repeatedly • You can also select the repeat mode using the on-screen bar (see page 28). Repeat Play You can repeat playback. • For DVD Video: While playing... Before starting playback... • For DVD Audio: While playing or before playback.
27 English On-Screen Disc Operations On-screen Bar Information You can check the disc information (except for MP3/WMA/ JPEG disc) and use some functions through the on-screen bar. 2 OFF 1/3 1/3 1/3 TIME 4 TITLE 14 TOT AL 1:25:58 CHAP 23 DVD-VIDEO TITLE 2 TIME OFF CHAP .
28 English Operations Using the On-screen Bar Ex.: Selecting a subtitle (French) for DVD Video: While a disc is selected as the source... 1 Display the on-screen bar with the pull-down menu. 2 Select (highlight) the item you want. 3 Display the pop-up window.
29 English 4 Select the repeat mode you want. * During Program Play and Random Play, “STEP” appears. 5 Finish the setting. A-B Repeat • See also page 26. 1 While playing, display the on-screen bar with the pull- down menu. 2 Select . 3 Display the pop-up window.
30 English 4 Enter the desired chapter/track number. • To correct a misentry, press the 10 keys until the desired number shown in the pop-up window. 5 Finish the setting. Operations on t he CONTROL Screen The CONTROL screen automatically appears on the TV screen when you load an MP3, WMA, or JPEG disc.
31 English To move the highlight bar between group list and track list To select a group/track in the list To start playback • Once you start playing back a JPEG track, the CONTROL screen goes off. • To cancel slide-show, and display the current still picture, press ENTER.
32 English Advanced Tape Operations Recording on a Tape You can use type I tapes for recording. • To play a tape, see page 16. 1 Insert a recordable cassette. 2 Check the tape running direction and Reverse mode settings on the display. To change the direction To change the Reverse mode if necessary 7 SHIFT REV.
33 English 3 Select and start playing the source—“FM,” “AM,” “DVD/CD,” or “AUX.” • When recording a disc, you can also use “Synchronized Disc Recording” (see below). 4 Start recording. • While recording a disc, recording stops automatically after the disc player plays back the disc.
34 English To record only your favorite track You can specify tracks to be recorded on the tape while listening to a disc. • This function is not available for DVD Video. 1 Start playing a disc. 2 While a track you want to record on the tape is playing.
35 English Timer Operations Setting the Timer Using Daily Timer, you can wake up with your favorite music. On the other hand, with Recording Timer, you can make a tape of a radio broadcast automatically.
36 English 3 For Daily Timers: Select the playback source— “TUNER FM,” “TUNER AM,” “TAPE,” “DISC” or “AUX.” For Recording Timer: Select the playback source—“TUNER FM,”“TUNER AM” or “AUX.” 4 For “TUNER FM” and “TUNER AM”: Select a preset channel.
37 English Setup Menu Operations . Operating Procedure You can use the Setup Menus only when a disc is selected as the source and its playback is not yet started. Ex.: Selecting “STILL PICTURE” for “FILE TYPE”: 1 Display the Setup Menu. 2 Select one of the Setup Menus.
38 English 6 Finish the setting. 7 Repeat steps 3 to 4 to set other items on the same Setup Menu. Repeat steps 2 to 4 to set other items on another Setup Menu. To erase the Setup Menu 7 LANGUAGE Setup Menu You can select the initial languages for disc playback.
39 English PICTURE SOURCE You can obtain optimal picture quality by selecting an appropriate option—picture source type (either video source or film source). Select one of the following: SCREEN SAVER You can activate or deactivate screen saver while operating the built-in disc player.
40 English D. RANGE COMPRESSION You can compress the dynamic range (the difference between the loudest sound and the softest sound) to enjoy a powerful sound even at a low volume level when listening to Dolby Digital software. This is useful at night.
41 English Restricting the Review —Parental Lock You can restrict playback of DVD Video containing violent scenes and those unsuitable for your family members.
42 English To change the setting 1 Display the PARENTAL LOCK sub menu. • Follow steps 1 to 4 of “To set Parental Lock”. “PASSWORD” is automatically selected. • You cannot select any item other than “EXIT” until you enter the correct password.
43 English Additional Information Learning More about This System Getting Started (see pages 3 to 7) Changing the Scanning Mode: • To enjoy the progressive video picture, connect a TV with the progressive video input using component video cord.
44 English • You cannot use Program Play and Random Play for JPEG discs. • You cannot eject tray while in Program Play. Playing at Random—Random Play: • The 4 button does not work for skipping chapters or tracks, but only work for going back to the beginning of the current chapter or track.
45 English Maintenance To get the best performance of the System, keep your discs and mechanism clean. Handling discs • When removing the disc from its case, hold it at the edge while pressing the center hole lightly. • Do not touch the shiny surface of the disc, or bend the disc.
46 English Troubleshooting If you are having a problem with your System, check this list for a possible solution before calling for service. General: Adjustments or settings are suddenly canceled before you finish. ] There is a time limit. Repeat the procedure again.
47 English Language Code List AA Afar AB Abkhazian AF Afrikaans AM Ameharic AR Arabic AS Assamese AY Aymara AZ Azerbaijani BA Bashkir BE Byelorussian BG Bulgarian BH Bihari BI Bislama BN Bengali, Bang.
48 English Country/Area Codes List √ AD Andorra AE United Arab Emirates AF Afghanistan AG Antigua and Barbuda AI Anguilla AL Albania AM Armenia AN Netherlands Antilles AO Angola AQ Antarctica AR Arg.
49 English NP Nepal NR Nauru NU Niue NZ New Zealand OM Oman PA Panama PE Peru PF French Polynesia PG Papua New Guinea PH Philippines PK Pakistan PL Poland PM Saint Pierre and Miquelon PN Pitcairn PR P.
50 English Specifications Amplifier section Output Power: HIGH: 40 W (20 W+ 20 W) at 4 Ω (10% THD) 50 W (25 W+ 25 W) at 4 Ω (10% MAX) LOW: 40 W (20 W+ 20 W) at 4 Ω (10% THD) 50 W (25 W+ 25 W) at.
VICTOR COMPANY OF JAPAN, LIMITED LOW HIGH S-VIDEO VIDEO VO LT AG E SE LEC TO R 220V — 230V 127V 1 10V NTSC V I D EO O U T S E LE C T E R P AL PU SH O PEN A U T O R E V E R S E VOL T AGE SELECTOR 220V— 230V 127V 1 10V 0304AIMMDWJEM EN,SP,PR © 2004 VICTOR COMPANY OF JAPAN, LIMITED Mains (AC) Line Instruction (not applicable for Europe, U.
MICRO COMPONENT SYSTEM UX-S77 —Consists of CA-UXS77 and SP-UXS77 INSTRUCTIONS GVT0131-003A [UJ] DIGITAL.
G-1 Warnings, Cautions and Others CAUTION—STANDBY/ON button! Disconnect the mains plug to shut the power off completely (all lamps and indications go off). The STANDBY/ON button in any position does not disconnect the mains line. • When the unit is on standby, the STANDBY/ON lamp lights in red.
G-2 CAUTION: Proper Ventilation To avoid risk of electric shock and fire, and to prevent damage, locate the apparatus as follows: 1. Front: No obstructions and open spacing. 2. Sides/ Top/ Back: No obstructions should be placed in the areas shown by the dimensions below.
G-3 IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION : Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel. 3. CAUTION : Visible and invisible laser radiation when open and interlock failed or defeated.
1 Contents Introduction ............................................................ 2 Precautions .......................................................................... 2 How to Read This Manual .................................................. 2 Getting Started .
2 Introduction Precautions Installation • Install in a place which is level, dry and neither too hot nor too cold—between 5°C and 35°C. • Install the System in a location with adequate ventilation to prevent internal heat buildup in the System.
3 Getting Started Step 1 : Unpack After unpacking, check to be sure that you have all the following items. The number in parentheses indicates the quantity of each piece supplied.
4 Step 3 : Hook Up If you need more detailed information, see pages 6 and 7. TV AUX DECODER AUDIO OUT P B P R Y OPTICAL DIGITAL IN AV COMPU LINK VIDEO INPUT VIDEO INPUT VIDEO INPUT Illustrations of the input/output terminals below are typical examples.
5 LOW HIGH P USH OPEN AUTO REVERSE S-VIDEO VIDEO VOLT AGE SELECTOR 220V— 230V 127V 110V FM antenna (supplied) Extend it so that you can obtain the best reception. AM loop antenna Keep it connected. Vynile-covered wire (not supplied) Extend it horizontally.
6 To assemble and connect the AM loop antenna To assemble the AM loop antenna To connect the AM loop antenna • If the AM loop antenna wire or speaker cords are covered with vinyl, remove the vinyl to expose the tip of the antenna by twisting the vinyl.
7 To connect the AV COMPU LINK cords This system allows you to use JVC’s TV with simple operations; by starting playing back a disc, the TV automatically turns on and changes the input mode to the appropriate position so that you can view the playback picture.
8 Before Operating the System Playable Disc Types This unit has been designed to play back the following discs: In addition to the above discs, this system can play back audio data recorded on CD Text, CD-G (CD Graphics), and CD-Extra.
9 Parts Index Refer to the pages to see how to use the buttons and controls. DISPLA Y SLEEP SET CLOCK/ TIMER FADE MUTING REPEAT A-B REPEA T REV .MODE BASS/ TREBLE RHYTHM AX RETURN CANCEL PAG E + DVD L.
10 Display Indicators The indications on the display teach you a lot of things while you are operating the System. Before operating the System, be familiar with when and how the indicator illuminates on the display. 1 Disc tray indicators • 1-5: Disc tray number indicators.
11 Indications on the main display while operating a disc • If Resume is turned “ON” (see page 40), “RESUME” appears when you stop playback (except for Audio CD and MP3/ WMA/JPEG discs).
12 Daily Operations —Playback 1 Turn on the power. The STANDBY/ON lamp on the main unit lights in green. • Without pressing STANDBY/ON , the System turns on by pressing one of the source selecting buttons in the next step. 2 Select the source. Playback automatically starts if the selected source is ready to start.
13 Listening to the Radio To select the AM tuner interval spacing Some countries space AM stations 9 kHz spacing, and other countries use 10 kHz spacing. You can change the AM tuner intervals while the System is on stand by and the last selected source is AM.
14 Playing Back a Disc Before operating a disc, be familiar how a disc is recorded. • DVD Video comprises of “ Titles ” which includes “ Chapters ,” DVD Audio/MP3/WMA comprise of “ Groups ” which include “ Tracks ,” and CD/SVCD/VCD comprise of only “ Tracks .
15 To locate a particular portion While playing a disc except MP3/WMA... • No sound comes out while searching on DVD Video/ SVCD/VCD. To return to normal playback, press DVD/CD 3 . To locate an item directly You can select a title/chapter/track directly and start playback.
16 7 For SVCD/VCD with PBC: While playing a disc with PBC, “PBC” appears on the display. When disc menu appears on the TV screen, select an item on the menu. Playback of the selected item starts. To cancel PBC • You can also cancel PBC function by pressing the number button to select a track.
17 Daily Operations —Sound&Other Adjustments Adjusting the Volume You can adjust the volume level from level 0 (VOL MIN) to level 50 (VOL MAX). To drop the volume in a moment Adjusting the Sound To emphasize rhythm feeling—RHYTHM AX This function emphasizes bass attack feeling.
18 Presetting Automatic DVD Sound Increase Level The DVD sound is sometimes recorded at a lower level than for other discs and sources. You can set the increase level for the currently loaded DVD, so you do not have to adjust the volume every time you change the source.
19 To adjust the picture tone 1 Select “USER1” or “USER2.” • Follow steps 1 and 2 explained on page 18. 2 Select a parameter you want to adjust. 3 Adjust the parameter. 4 Repeat steps 2 to 3 to adjust other parameters. To erase the screen, press VFP again while holding SHIFT.
20 Turning Off the Power Automatically To turn off the unit after playback is over—Auto Standby When Auto Standby is in use, the A.STANDBY indicator lights on the display.
21 Unique DVD/VCD Operations Selecting the Sound Track For DVD Video: While playing back a chapter containing audio languages, you can select the language to listen to. For DVD Audio: While playing back a track containing audio channels, you can select the audio channel to listen to.
22 Selecting the Subtitle Language For DVD Video: While playing back a chapter containing subtitles in different languages, you can select the subtitle language to display on the TV screen. For SVCD: While playing, you can select the subtitles even if no subtitles are recorded on the disc.
23 Selecting Browsable Still Pictures While playing back a track (of DVD Audio) linked to browsable still pictures (BSP), you can select the still picture (turn the page) to be shown on the TV screen. • If a track is linked to browsable still pictures (BSP), they are usually shown in turn automatically during playback.
24 Advanced Disc Operations Programming the Playing Order— Program Play You can arrange the playing order of the chapters or tracks (up to 99) before you start playback. 1 Before starting playback, activate Program Play. 2 Select chapters or tracks you want for Program Play.
25 4 Start playback. To check the programmed contents Before or after playback... To modify the program Before or after playback... To exit from Program Play Before or after playback... Playing at Random—Random Play You can play the chapters or tracks of all loaded discs at random.
26 Playing Repeatedly • You can also select the repeat mode using the on-screen bar (see page 28). Repeat Play You can repeat playback. • For DVD Video: While playing... Before starting playback... • For DVD Audio: While playing or before playback.
27 On-Screen Disc Operations On-screen Bar Information You can check the disc information (except for MP3/WMA/ JPEG disc) and use some functions through the on-screen bar. 2 OFF 1/3 1/3 1/3 TIME 4 TITLE 14 TOT AL 1:25:58 CHAP 23 DVD-VIDEO TITLE 2 TIME OFF CHAP .
28 Operations Using the On-screen Bar Ex.: Selecting a subtitle (French) for DVD Video: While a disc is selected as the source... 1 Display the on-screen bar with the pull-down menu. 2 Select (highlight) the item you want. 3 Display the pop-up window.
29 4 Select the repeat mode you want. * During Program Play and Random Play, “STEP” appears. 5 Finish the setting. A-B Repeat • See also page 26. 1 While playing, display the on-screen bar with the pull- down menu. 2 Select . 3 Display the pop-up window.
30 4 Enter the desired chapter/track number. • To correct a misentry, press the 10 keys until the desired number shown in the pop-up window. 5 Finish the setting. Operations on t he CONTROL Screen The CONTROL screen automatically appears on the TV screen when you load an MP3, WMA, or JPEG disc.
31 To move the highlight bar between group list and track list To select a group/track in the list To start playback • Once you start playing back a JPEG track, the CONTROL screen goes off. • To cancel slide-show, and display the current still picture, press ENTER.
32 Advanced Tape Operations Recording on a Tape You can use type I tapes for recording. • To play a tape, see page 16. 1 Insert a recordable cassette. 2 Check the tape running direction and Reverse mode settings on the display. To change the direction To change the Reverse mode if necessary 7 SHIFT REV.
33 3 Select and start playing the source—“FM,” “AM,” “DVD/CD,” or “AUX.” • When recording a disc, you can also use “Synchronized Disc Recording” (see below). 4 Start recording. • While recording a disc, recording stops automatically after the disc player plays back the disc.
34 To record only your favorite track You can specify tracks to be recorded on the tape while listening to a disc. • This function is not available for DVD Video. 1 Start playing a disc. 2 While a track you want to record on the tape is playing... 3 Repeat steps 2 and 3 to record other tracks you want.
35 Timer Operations Setting the Timer Using Daily Timer, you can wake up with your favorite music. On the other hand, with Recording Timer, you can make a tape of a radio broadcast automatically.
36 3 For Daily Timers: Select the playback source— “TUNER FM,” “TUNER AM,” “TAPE,” “DISC” or “AUX.” For Recording Timer: Select the playback source—“TUNER FM,”“TUNER AM” or “AUX.” 4 For “TUNER FM” and “TUNER AM”: Select a preset channel.
37 Setup Menu Operations . Operating Procedure You can use the Setup Menus only when a disc is selected as the source and its playback is not yet started. Ex.: Selecting “STILL PICTURE” for “FILE TYPE”: 1 Display the Setup Menu. 2 Select one of the Setup Menus.
38 6 Finish the setting. 7 Repeat steps 3 to 4 to set other items on the same Setup Menu. Repeat steps 2 to 4 to set other items on another Setup Menu. To erase the Setup Menu 7 LANGUAGE Setup Menu You can select the initial languages for disc playback.
39 PICTURE SOURCE You can obtain optimal picture quality by selecting an appropriate option—picture source type (either video source or film source). Select one of the following: SCREEN SAVER You can activate or deactivate screen saver while operating the built-in disc player.
40 D. RANGE COMPRESSION You can compress the dynamic range (the difference between the loudest sound and the softest sound) to enjoy a powerful sound even at a low volume level when listening to Dolby Digital software. This is useful at night. • The effectiveness varies depends on a software.
41 Restricting the Review —Parental Lock You can restrict playback of DVD Video containing violent scenes and those unsuitable for your family members. Once you have set the rating level, such violent scenes (for which a higher level than you set is assigned) may be skipped or changed to another scene (depending on how the disc is programmed).
42 To change the setting 1 Display the PARENTAL LOCK sub menu. • Follow steps 1 to 4 of “To set Parental Lock”. “PASSWORD” is automatically selected. • You cannot select any item other than “EXIT” until you enter the correct password. 2 Enter your password.
43 Additional Information Learning More about This System Getting Started (see pages 3 to 7) Changing the Scanning Mode: • To enjoy the progressive video picture, connect a TV with the progressive video input using component video cord.
44 Playing at Random—Random Play: • The 4 button does not work for skipping chapters or tracks, but only work for going back to the beginning of the current chapter or track. On-Screen Disc Operations (see pages 27 to 31) • For JPEG files playback.
45 Maintenance To get the best performance of the System, keep your discs and mechanism clean. Handling discs • When removing the disc from its case, hold it at the edge while pressing the center hole lightly. • Do not touch the shiny surface of the disc, or bend the disc.
46 Troubleshooting If you are having a problem with your System, check this list for a possible solution before calling for service. General: Adjustments or settings are suddenly canceled before you finish. ] There is a time limit. Repeat the procedure again.
47 Language Code List AA Afar AB Abkhazian AF Afrikaans AM Ameharic AR Arabic AS Assamese AY Aymara AZ Azerbaijani BA Bashkir BE Byelorussian BG Bulgarian BH Bihari BI Bislama BN Bengali, Bangla BO Ti.
48 Country/Area Codes List AD Andorra AE United Arab Emirates AF Afghanistan AG Antigua and Barbuda AI Anguilla AL Albania AM Armenia AN Netherlands Antilles AO Angola AQ Antarctica AR Argentina AS Am.
49 NP Nepal NR Nauru NU Niue NZ New Zealand OM Oman PA Panama PE Peru PF French Polynesia PG Papua New Guinea PH Philippines PK Pakistan PL Poland PM Saint Pierre and Miquelon PN Pitcairn PR Puerto Ri.
50 Specifications Amplifier section Output Power: HIGH: 40 W (20 W+ 20 W) at 4 Ω (10% THD) 50 W (25 W+ 25 W) at 4 Ω (10% MAX) LOW: 40 W (20 W+ 20 W) at 4 Ω (10% THD) 50 W (25 W+ 25 W) at 4 Ω (.
MEMO.
VICTOR COMPANY OF JAPAN, LIMITED 0404AIMMDWJEM EN © 2004 VICTOR COMPANY OF JAPAN, LIMITED Mains (AC) Line Instruction (not applicable for Europe, U.S.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté JVC GVT0131-010A c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du JVC GVT0131-010A - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation JVC GVT0131-010A, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le JVC GVT0131-010A va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le JVC GVT0131-010A, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du JVC GVT0131-010A.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le JVC GVT0131-010A. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei JVC GVT0131-010A ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
